High level Bluetooth Low Energy API and radio abstraction layer

Dependencies:   nRF51822

Dependents:   LinkNode_LIS3DH

Fork of BLE_API by Bluetooth Low Energy

Revision:
716:11b41f651697
Parent:
715:6d415ac147aa
Child:
717:3129b149a6b2
--- a/public/GattCharacteristicCallbackParams.h	Thu Jul 02 09:06:11 2015 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,80 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef __GATT_CHARACTERISTIC_CALLBACK_PARAMS_H__
-#define __GATT_CHARACTERISTIC_CALLBACK_PARAMS_H__
-
-struct GattCharacteristicWriteCBParams {
-    GattAttribute::Handle_t charHandle;
-    enum Type {
-        GATTS_CHAR_OP_INVALID               = 0x00,  /**< Invalid Operation. */
-        GATTS_CHAR_OP_WRITE_REQ             = 0x01,  /**< Write Request. */
-        GATTS_CHAR_OP_WRITE_CMD             = 0x02,  /**< Write Command. */
-        GATTS_CHAR_OP_SIGN_WRITE_CMD        = 0x03,  /**< Signed Write Command. */
-        GATTS_CHAR_OP_PREP_WRITE_REQ        = 0x04,  /**< Prepare Write Request. */
-        GATTS_CHAR_OP_EXEC_WRITE_REQ_CANCEL = 0x05,  /**< Execute Write Request: Cancel all prepared writes. */
-        GATTS_CHAR_OP_EXEC_WRITE_REQ_NOW    = 0x06,  /**< Execute Write Request: Immediately execute all prepared writes. */
-    } op;                  /**< Type of write operation, */
-    uint16_t       offset; /**< Offset for the write operation. */
-    uint16_t       len;    /**< Length of the incoming data. */
-    const uint8_t *data;   /**< Incoming data, variable length. */
-};
-
-struct GattCharacteristicReadCBParams {
-    GattAttribute::Handle_t charHandle;
-    enum Type {
-        GATTS_CHAR_OP_INVALID               = 0x00,  /**< Invalid Operation. */
-        GATTS_CHAR_OP_READ_REQ              = 0x0A,  /**< Read Request. */
-    } op;                  /**< Type of write operation, */
-    uint16_t       offset; /**< Offset for the read operation. */
-    uint16_t       *len;   /**< Length of the outgoing data. */
-    uint8_t        *data;  /**< Outgoing data, variable length. */
-};
-
-enum GattCharacteristicAuthCBReply_t {
-    AUTH_CALLBACK_REPLY_SUCCESS =                       0x00,    /**< Success. */
-    AUTH_CALLBACK_REPLY_ATTERR_INVALID_HANDLE =         0x0101,  /**< ATT Error: Invalid Attribute Handle. */
-    AUTH_CALLBACK_REPLY_ATTERR_READ_NOT_PERMITTED =     0x0102,  /**< ATT Error: Read not permitted. */
-    AUTH_CALLBACK_REPLY_ATTERR_WRITE_NOT_PERMITTED =    0x0103,  /**< ATT Error: Write not permitted. */
-    AUTH_CALLBACK_REPLY_ATTERR_INSUF_AUTHENTICATION =   0x0105,  /**< ATT Error: Authenticated link required. */
-    AUTH_CALLBACK_REPLY_ATTERR_INVALID_OFFSET =         0x0107,  /**< ATT Error: Offset specified was past the end of the attribute. */
-    AUTH_CALLBACK_REPLY_ATTERR_INSUF_AUTHORIZATION =    0x0108,  /**< ATT Error: Used in ATT as Insufficient Authorisation. */
-    AUTH_CALLBACK_REPLY_ATTERR_PREPARE_QUEUE_FULL =     0x0109,  /**< ATT Error: Used in ATT as Prepare Queue Full. */
-    AUTH_CALLBACK_REPLY_ATTERR_ATTRIBUTE_NOT_FOUND =    0x010A,  /**< ATT Error: Used in ATT as Attribute not found. */
-    AUTH_CALLBACK_REPLY_ATTERR_ATTRIBUTE_NOT_LONG =     0x010B,  /**< ATT Error: Attribute cannot be read or written using read/write blob requests. */
-    AUTH_CALLBACK_REPLY_ATTERR_INVALID_ATT_VAL_LENGTH = 0x010D,  /**< ATT Error: Invalid value size. */
-    AUTH_CALLBACK_REPLY_ATTERR_INSUF_RESOURCES =        0x0111,  /**< ATT Error: Encrypted link required. */
-};
-
-struct GattCharacteristicWriteAuthCBParams {
-    GattAttribute::Handle_t  charHandle;
-    uint16_t                 offset; /**< Offset for the write operation. */
-    uint16_t                 len;    /**< Length of the incoming data. */
-    const uint8_t           *data;   /**< Incoming data, variable length. */
-    GattCharacteristicAuthCBReply_t authorizationReply; /* This is the out parameter which needs to be set to true by the callback if the
-                                                         * request is to proceed; false otherwise. */
-};
-
-struct GattCharacteristicReadAuthCBParams {
-    GattAttribute::Handle_t  charHandle;
-    uint16_t                 offset; /**< Offset for the read operation. */
-    uint16_t                 len;    /**< Optional: new length of the outgoing data. */
-    uint8_t                 *data;   /**< Optional: new outgoing data. Leave at NULL if data is unchanged. */
-    GattCharacteristicAuthCBReply_t authorizationReply; /* This is the out parameter which needs to be set to true by the callback if the
-                                                         * request is to proceed; false otherwise. */
-};
-
-#endif /*__GATT_CHARACTERISTIC_CALLBACK_PARAMS_H__*/
\ No newline at end of file