BLE_API - High level Bluetooth Low Energy API and radio abs…

Users » luzai » Code » BLE_API

Wang Xinglu / BLE_API

High level Bluetooth Low Energy API and radio abstraction layer

Dependencies: nRF51822

Dependents: LinkNode_LIS3DH

Fork of BLE_API by Bluetooth Low Energy

ble/Gap.h@1119:7a487d506451, 2016-01-11 (annotated)

Committer:: vcoubard
Date:: Mon Jan 11 08:52:03 2016 +0000
Revision:: 1119:7a487d506451
Parent:: 1118:88af68f0226b
Child:: 1121:df91547290be

Synchronized with git rev 819a0ca7

Author: Andres Amaya Garcia

Fix comments and add Address_t empty constructor



Add an empty constructor to BLEProtocol::Address_t and fixed comments with

regards to BLEProtocol::Address_t.

Who changed what in which revision?

User	Revision	Line number	New contents of line
rgrover1	710:b2e1a2660ec2	1	/* mbed Microcontroller Library
rgrover1	710:b2e1a2660ec2	2	* Copyright (c) 2006-2013 ARM Limited
rgrover1	710:b2e1a2660ec2	3	*
rgrover1	710:b2e1a2660ec2	4	* Licensed under the Apache License, Version 2.0 (the "License");
rgrover1	710:b2e1a2660ec2	5	* you may not use this file except in compliance with the License.
rgrover1	710:b2e1a2660ec2	6	* You may obtain a copy of the License at
rgrover1	710:b2e1a2660ec2	7	*
rgrover1	710:b2e1a2660ec2	8	* http://www.apache.org/licenses/LICENSE-2.0
rgrover1	710:b2e1a2660ec2	9	*
rgrover1	710:b2e1a2660ec2	10	* Unless required by applicable law or agreed to in writing, software
rgrover1	710:b2e1a2660ec2	11	* distributed under the License is distributed on an "AS IS" BASIS,
rgrover1	710:b2e1a2660ec2	12	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1	710:b2e1a2660ec2	13	* See the License for the specific language governing permissions and
rgrover1	710:b2e1a2660ec2	14	* limitations under the License.
rgrover1	710:b2e1a2660ec2	15	*/
rgrover1	710:b2e1a2660ec2	16
rgrover1	710:b2e1a2660ec2	17	#ifndef __GAP_H__
rgrover1	710:b2e1a2660ec2	18	#define __GAP_H__
rgrover1	710:b2e1a2660ec2	19
vcoubard	1078:79c089630b38	20	#include "ble/BLEProtocol.h"
rgrover1	710:b2e1a2660ec2	21	#include "GapAdvertisingData.h"
rgrover1	710:b2e1a2660ec2	22	#include "GapAdvertisingParams.h"
rgrover1	710:b2e1a2660ec2	23	#include "GapScanningParams.h"
rgrover1	710:b2e1a2660ec2	24	#include "GapEvents.h"
rgrover1	829:9072de50087b	25	#include "CallChainOfFunctionPointersWithContext.h"
rgrover1	710:b2e1a2660ec2	26	#include "FunctionPointerWithContext.h"
vcoubard	1116:9cb51490b3f7	27	#include "deprecate.h"
rgrover1	710:b2e1a2660ec2	28
vcoubard	1048:efb29faf12fc	29	/* Forward declarations for classes that will only be used for pointers or references in the following. */
rgrover1	710:b2e1a2660ec2	30	class GapAdvertisingParams;
rgrover1	710:b2e1a2660ec2	31	class GapScanningParams;
rgrover1	710:b2e1a2660ec2	32	class GapAdvertisingData;
rgrover1	710:b2e1a2660ec2	33
rgrover1	710:b2e1a2660ec2	34	class Gap {
vcoubard	1078:79c089630b38	35	/*
vcoubard	1078:79c089630b38	36	* DEPRECATION ALERT: all of the APIs in this `public` block are deprecated.
vcoubard	1078:79c089630b38	37	* They have been relocated to the class BLEProtocol.
vcoubard	1078:79c089630b38	38	*/
rgrover1	710:b2e1a2660ec2	39	public:
vcoubard	1078:79c089630b38	40	/**
vcoubard	1078:79c089630b38	41	* Address-type for BLEProtocol addresses.
vcoubard	1091:58b2dac13261	42	*
vcoubard	1086:75d4e8ce277d	43	* @note: deprecated. Use BLEProtocol::AddressType_t instead.
vcoubard	1078:79c089630b38	44	*/
vcoubard	1086:75d4e8ce277d	45	typedef BLEProtocol::AddressType_t AddressType_t;
vcoubard	1086:75d4e8ce277d	46
vcoubard	1086:75d4e8ce277d	47	/**
vcoubard	1086:75d4e8ce277d	48	* Address-type for BLEProtocol addresses.
vcoubard	1086:75d4e8ce277d	49	* @note: deprecated. Use BLEProtocol::AddressType_t instead.
vcoubard	1087:4c6e11878033	50	*/
vcoubard	1087:4c6e11878033	51	typedef BLEProtocol::AddressType_t addr_type_t;
vcoubard	1087:4c6e11878033	52
vcoubard	1091:58b2dac13261	53	/**
vcoubard	1091:58b2dac13261	54	* Address-type for BLEProtocol addresses.
vcoubard	1116:9cb51490b3f7	55	* \deprecated: Use BLEProtocol::AddressType_t instead.
vcoubard	1091:58b2dac13261	56	*
vcoubard	1091:58b2dac13261	57	* DEPRECATION ALERT: The following constants have been left in their
vcoubard	1091:58b2dac13261	58	* deprecated state to transparenly support existing applications which may
vcoubard	1091:58b2dac13261	59	* have used Gap::ADDR_TYPE_*.
vcoubard	1091:58b2dac13261	60	*/
vcoubard	1116:9cb51490b3f7	61	enum DeprecatedAddressType_t {
vcoubard	1091:58b2dac13261	62	ADDR_TYPE_PUBLIC = BLEProtocol::AddressType::PUBLIC,
vcoubard	1091:58b2dac13261	63	ADDR_TYPE_RANDOM_STATIC = BLEProtocol::AddressType::RANDOM_STATIC,
vcoubard	1091:58b2dac13261	64	ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE = BLEProtocol::AddressType::RANDOM_PRIVATE_RESOLVABLE,
vcoubard	1091:58b2dac13261	65	ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE = BLEProtocol::AddressType::RANDOM_PRIVATE_NON_RESOLVABLE
vcoubard	1091:58b2dac13261	66	};
vcoubard	1091:58b2dac13261	67
vcoubard	1078:79c089630b38	68	static const unsigned ADDR_LEN = BLEProtocol::ADDR_LEN; /*< Length (in octets) of the BLE MAC address. /
vcoubard	1119:7a487d506451	69	typedef BLEProtocol::AddressBytes_t Address_t; /*< 48-bit address, LSB format. @Note: Deprecated. Use BLEProtocol::AddressBytes_t instead. /
vcoubard	1119:7a487d506451	70	typedef BLEProtocol::AddressBytes_t address_t; /*< 48-bit address, LSB format. @Note: Deprecated. Use BLEProtocol::AddressBytes_t instead. /
vcoubard	1078:79c089630b38	71
vcoubard	1078:79c089630b38	72	public:
rgrover1	710:b2e1a2660ec2	73	enum TimeoutSource_t {
rgrover1	710:b2e1a2660ec2	74	TIMEOUT_SRC_ADVERTISING = 0x00, /*< Advertising timeout. /
rgrover1	710:b2e1a2660ec2	75	TIMEOUT_SRC_SECURITY_REQUEST = 0x01, /*< Security request timeout. /
rgrover1	710:b2e1a2660ec2	76	TIMEOUT_SRC_SCAN = 0x02, /*< Scanning timeout. /
rgrover1	710:b2e1a2660ec2	77	TIMEOUT_SRC_CONN = 0x03, /*< Connection timeout. /
rgrover1	710:b2e1a2660ec2	78	};
rgrover1	710:b2e1a2660ec2	79
rgrover1	710:b2e1a2660ec2	80	/**
rgrover1	710:b2e1a2660ec2	81	* Enumeration for disconnection reasons. The values for these reasons are
vcoubard	1048:efb29faf12fc	82	* derived from Nordic's implementation, but the reasons are meant to be
vcoubard	1048:efb29faf12fc	83	* independent of the transport. If you are returned a reason that is not
vcoubard	1048:efb29faf12fc	84	* covered by this enumeration, please refer to the underlying
rgrover1	710:b2e1a2660ec2	85	* transport library.
rgrover1	710:b2e1a2660ec2	86	*/
rgrover1	710:b2e1a2660ec2	87	enum DisconnectionReason_t {
rgrover1	710:b2e1a2660ec2	88	CONNECTION_TIMEOUT = 0x08,
rgrover1	710:b2e1a2660ec2	89	REMOTE_USER_TERMINATED_CONNECTION = 0x13,
vcoubard	1048:efb29faf12fc	90	REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES = 0x14, /*< Remote device terminated connection due to low resources./
vcoubard	1048:efb29faf12fc	91	REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF = 0x15, /*< Remote device terminated connection due to power off. /
rgrover1	710:b2e1a2660ec2	92	LOCAL_HOST_TERMINATED_CONNECTION = 0x16,
rgrover1	710:b2e1a2660ec2	93	CONN_INTERVAL_UNACCEPTABLE = 0x3B,
rgrover1	710:b2e1a2660ec2	94	};
rgrover1	710:b2e1a2660ec2	95
vcoubard	1118:88af68f0226b	96	/**
vcoubard	1118:88af68f0226b	97	* Enumeration for whitelist advertising policy filter modes. The possible
vcoubard	1118:88af68f0226b	98	* filter modes were obtained from the Bluetooth Core Specification
vcoubard	1118:88af68f0226b	99	* 4.2 (Vol. 6), Part B, Section 4.3.2.
vcoubard	1118:88af68f0226b	100	*/
vcoubard	1118:88af68f0226b	101	enum AdvertisingPolicyMode_t {
vcoubard	1118:88af68f0226b	102	ADV_POLICY_IGNORE_WHITELIST = 0,
vcoubard	1118:88af68f0226b	103	ADV_POLICY_FILTER_SCAN_REQS = 1,
vcoubard	1118:88af68f0226b	104	ADV_POLICY_FILTER_CONN_REQS = 2,
vcoubard	1118:88af68f0226b	105	ADV_POLICY_FILTER_ALL_REQS = 3,
vcoubard	1118:88af68f0226b	106	};
vcoubard	1118:88af68f0226b	107
vcoubard	1118:88af68f0226b	108	/**
vcoubard	1118:88af68f0226b	109	* Enumeration for whitelist scanning policy filter modes. The possible
vcoubard	1118:88af68f0226b	110	* filter modes were obtained from the Bluetooth Core Specification
vcoubard	1118:88af68f0226b	111	* 4.2 (Vol. 6), Part B, Section 4.3.3.
vcoubard	1118:88af68f0226b	112	*/
vcoubard	1118:88af68f0226b	113	enum ScanningPolicyMode_t {
vcoubard	1118:88af68f0226b	114	SCAN_POLICY_IGNORE_WHITELIST = 0,
vcoubard	1118:88af68f0226b	115	SCAN_POLICY_FILTER_ALL_ADV = 1,
vcoubard	1118:88af68f0226b	116	};
vcoubard	1118:88af68f0226b	117
vcoubard	1118:88af68f0226b	118	/**
vcoubard	1118:88af68f0226b	119	* Enumeration for the whitelist initiator policy fiter modes. The possible
vcoubard	1118:88af68f0226b	120	* filter modes were obtained from the Bluetooth Core Specification
vcoubard	1118:88af68f0226b	121	* 4.2 (vol. 6), Part B, Section 4.4.4.
vcoubard	1118:88af68f0226b	122	*/
vcoubard	1118:88af68f0226b	123	enum InitiatorPolicyMode_t {
vcoubard	1118:88af68f0226b	124	INIT_POLICY_IGNORE_WHITELIST = 0,
vcoubard	1118:88af68f0226b	125	INIT_POLICY_FILTER_ALL_ADV = 1,
vcoubard	1118:88af68f0226b	126	};
vcoubard	1118:88af68f0226b	127
vcoubard	1118:88af68f0226b	128	/* Representation of a Bluetooth Low Enery Whitelist containing addresses. */
vcoubard	1118:88af68f0226b	129	struct Whitelist_t {
vcoubard	1118:88af68f0226b	130	BLEProtocol::Address_t *addresses;
vcoubard	1118:88af68f0226b	131	uint8_t size;
vcoubard	1118:88af68f0226b	132	};
vcoubard	1118:88af68f0226b	133
vcoubard	1118:88af68f0226b	134
vcoubard	1048:efb29faf12fc	135	/* Describes the current state of the device (more than one bit can be set). */
rgrover1	710:b2e1a2660ec2	136	struct GapState_t {
vcoubard	1048:efb29faf12fc	137	unsigned advertising : 1; /*< Peripheral is currently advertising. /
vcoubard	1048:efb29faf12fc	138	unsigned connected : 1; /*< Peripheral is connected to a central. /
rgrover1	710:b2e1a2660ec2	139	};
rgrover1	710:b2e1a2660ec2	140
rgrover1	710:b2e1a2660ec2	141	typedef uint16_t Handle_t; /* Type for connection handle. */
rgrover1	710:b2e1a2660ec2	142
rgrover1	710:b2e1a2660ec2	143	typedef struct {
vcoubard	1119:7a487d506451	144	uint16_t minConnectionInterval; /*< Minimum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS./
vcoubard	1119:7a487d506451	145	uint16_t maxConnectionInterval; /*< Maximum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS./
vcoubard	1119:7a487d506451	146	uint16_t slaveLatency; /*< Slave Latency in number of connection events, see @ref BLE_GAP_CP_LIMITS./
rgrover1	710:b2e1a2660ec2	147	uint16_t connectionSupervisionTimeout; /*< Connection Supervision Timeout in 10 ms units, see @ref BLE_GAP_CP_LIMITS./
rgrover1	710:b2e1a2660ec2	148	} ConnectionParams_t;
rgrover1	710:b2e1a2660ec2	149
rgrover1	710:b2e1a2660ec2	150	enum Role_t {
rgrover1	710:b2e1a2660ec2	151	PERIPHERAL = 0x1, /*< Peripheral Role. /
rgrover1	710:b2e1a2660ec2	152	CENTRAL = 0x2, /*< Central Role. /
rgrover1	710:b2e1a2660ec2	153	};
rgrover1	710:b2e1a2660ec2	154
rgrover1	710:b2e1a2660ec2	155	struct AdvertisementCallbackParams_t {
vcoubard	1117:421bdb7c5711	156	BLEProtocol::AddressBytes_t peerAddr;
vcoubard	1079:6e2d9514f3df	157	int8_t rssi;
vcoubard	1079:6e2d9514f3df	158	bool isScanResponse;
vcoubard	1079:6e2d9514f3df	159	GapAdvertisingParams::AdvertisingType_t type;
vcoubard	1079:6e2d9514f3df	160	uint8_t advertisingDataLen;
vcoubard	1079:6e2d9514f3df	161	const uint8_t *advertisingData;
rgrover1	710:b2e1a2660ec2	162	};
rgrover1	710:b2e1a2660ec2	163	typedef FunctionPointerWithContext<const AdvertisementCallbackParams_t *> AdvertisementReportCallback_t;
rgrover1	710:b2e1a2660ec2	164
rgrover1	710:b2e1a2660ec2	165	struct ConnectionCallbackParams_t {
vcoubard	1078:79c089630b38	166	Handle_t handle;
vcoubard	1078:79c089630b38	167	Role_t role;
vcoubard	1078:79c089630b38	168	BLEProtocol::AddressType_t peerAddrType;
vcoubard	1119:7a487d506451	169	BLEProtocol::AddressBytes_t peerAddr;
vcoubard	1078:79c089630b38	170	BLEProtocol::AddressType_t ownAddrType;
vcoubard	1119:7a487d506451	171	BLEProtocol::AddressBytes_t ownAddr;
vcoubard	1078:79c089630b38	172	const ConnectionParams_t *connectionParams;
rgrover1	710:b2e1a2660ec2	173
vcoubard	1078:79c089630b38	174	ConnectionCallbackParams_t(Handle_t handleIn,
vcoubard	1078:79c089630b38	175	Role_t roleIn,
vcoubard	1078:79c089630b38	176	BLEProtocol::AddressType_t peerAddrTypeIn,
vcoubard	1078:79c089630b38	177	const uint8_t *peerAddrIn,
vcoubard	1078:79c089630b38	178	BLEProtocol::AddressType_t ownAddrTypeIn,
vcoubard	1078:79c089630b38	179	const uint8_t *ownAddrIn,
vcoubard	1078:79c089630b38	180	const ConnectionParams_t *connectionParamsIn) :
rgrover1	710:b2e1a2660ec2	181	handle(handleIn),
rgrover1	710:b2e1a2660ec2	182	role(roleIn),
rgrover1	710:b2e1a2660ec2	183	peerAddrType(peerAddrTypeIn),
rgrover1	710:b2e1a2660ec2	184	peerAddr(),
rgrover1	710:b2e1a2660ec2	185	ownAddrType(ownAddrTypeIn),
rgrover1	710:b2e1a2660ec2	186	ownAddr(),
rgrover1	710:b2e1a2660ec2	187	connectionParams(connectionParamsIn) {
rgrover1	710:b2e1a2660ec2	188	memcpy(peerAddr, peerAddrIn, ADDR_LEN);
rgrover1	710:b2e1a2660ec2	189	memcpy(ownAddr, ownAddrIn, ADDR_LEN);
rgrover1	710:b2e1a2660ec2	190	}
rgrover1	710:b2e1a2660ec2	191	};
rgrover1	710:b2e1a2660ec2	192
rgrover1	829:9072de50087b	193	struct DisconnectionCallbackParams_t {
rgrover1	829:9072de50087b	194	Handle_t handle;
rgrover1	829:9072de50087b	195	DisconnectionReason_t reason;
rgrover1	829:9072de50087b	196
rgrover1	829:9072de50087b	197	DisconnectionCallbackParams_t(Handle_t handleIn,
rgrover1	829:9072de50087b	198	DisconnectionReason_t reasonIn) :
rgrover1	829:9072de50087b	199	handle(handleIn),
rgrover1	829:9072de50087b	200	reason(reasonIn)
rgrover1	829:9072de50087b	201	{}
rgrover1	829:9072de50087b	202	};
rgrover1	829:9072de50087b	203
rgrover1	710:b2e1a2660ec2	204	static const uint16_t UNIT_1_25_MS = 1250; /*< Number of microseconds in 1.25 milliseconds. /
rgrover1	710:b2e1a2660ec2	205	static uint16_t MSEC_TO_GAP_DURATION_UNITS(uint32_t durationInMillis) {
rgrover1	710:b2e1a2660ec2	206	return (durationInMillis * 1000) / UNIT_1_25_MS;
rgrover1	710:b2e1a2660ec2	207	}
rgrover1	766:03f1a26f132f	208
vcoubard	1052:b55e1ad3e1b3	209	typedef FunctionPointerWithContext<TimeoutSource_t> TimeoutEventCallback_t;
vcoubard	1052:b55e1ad3e1b3	210	typedef CallChainOfFunctionPointersWithContext<TimeoutSource_t> TimeoutEventCallbackChain_t;
rgrover1	710:b2e1a2660ec2	211
vcoubard	1052:b55e1ad3e1b3	212	typedef FunctionPointerWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallback_t;
vcoubard	1052:b55e1ad3e1b3	213	typedef CallChainOfFunctionPointersWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallbackChain_t;
vcoubard	1052:b55e1ad3e1b3	214
vcoubard	1052:b55e1ad3e1b3	215	typedef FunctionPointerWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallback_t;
vcoubard	1054:f59e5d9a992a	216	typedef CallChainOfFunctionPointersWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallbackChain_t;
vcoubard	1052:b55e1ad3e1b3	217
rgrover1	753:0f60274cd3ad	218	typedef FunctionPointerWithContext<bool> RadioNotificationEventCallback_t;
rgrover1	710:b2e1a2660ec2	219
vcoubard	1090:148d8b9b56a5	220	typedef FunctionPointerWithContext<const Gap *> GapShutdownCallback_t;
vcoubard	1090:148d8b9b56a5	221	typedef CallChainOfFunctionPointersWithContext<const Gap *> GapShutdownCallbackChain_t;
vcoubard	1090:148d8b9b56a5	222
rgrover1	710:b2e1a2660ec2	223	/*
rgrover1	710:b2e1a2660ec2	224	* The following functions are meant to be overridden in the platform-specific sub-class.
rgrover1	710:b2e1a2660ec2	225	*/
rgrover1	710:b2e1a2660ec2	226	public:
rgrover1	710:b2e1a2660ec2	227	/**
rgrover1	710:b2e1a2660ec2	228	* Set the BTLE MAC address and type. Please note that the address format is
vcoubard	1119:7a487d506451	229	* least significant byte first (LSB). Please refer to BLEProtocol::AddressBytes_t.
rgrover1	710:b2e1a2660ec2	230	*
rgrover1	710:b2e1a2660ec2	231	* @return BLE_ERROR_NONE on success.
rgrover1	710:b2e1a2660ec2	232	*/
vcoubard	1115:82d4a8a56d91	233	virtual ble_error_t setAddress(BLEProtocol::AddressType_t type, const BLEProtocol::AddressBytes_t address) {
rgrover1	734:4872b70437ce	234	/* avoid compiler warnings about unused variables */
rgrover1	734:4872b70437ce	235	(void)type;
rgrover1	734:4872b70437ce	236	(void)address;
rgrover1	734:4872b70437ce	237
rgrover1	728:997ba5e7b3b6	238	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1	710:b2e1a2660ec2	239	}
rgrover1	710:b2e1a2660ec2	240
rgrover1	710:b2e1a2660ec2	241	/**
rgrover1	710:b2e1a2660ec2	242	* Fetch the BTLE MAC address and type.
rgrover1	710:b2e1a2660ec2	243	*
rgrover1	710:b2e1a2660ec2	244	* @return BLE_ERROR_NONE on success.
rgrover1	710:b2e1a2660ec2	245	*/
vcoubard	1115:82d4a8a56d91	246	virtual ble_error_t getAddress(BLEProtocol::AddressType_t *typeP, BLEProtocol::AddressBytes_t address) {
vcoubard	1048:efb29faf12fc	247	/* Avoid compiler warnings about unused variables. */
rgrover1	734:4872b70437ce	248	(void)typeP;
rgrover1	734:4872b70437ce	249	(void)address;
rgrover1	734:4872b70437ce	250
rgrover1	728:997ba5e7b3b6	251	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1	710:b2e1a2660ec2	252	}
rgrover1	710:b2e1a2660ec2	253
rgrover1	710:b2e1a2660ec2	254	/**
vcoubard	1056:ce2fb3d09929	255	* @return Minimum Advertising interval in milliseconds for connectable
vcoubard	1056:ce2fb3d09929	256	* undirected and connectable directed event types.
rgrover1	710:b2e1a2660ec2	257	*/
rgrover1	710:b2e1a2660ec2	258	virtual uint16_t getMinAdvertisingInterval(void) const {
rgrover1	742:861ed7eb186d	259	return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1	710:b2e1a2660ec2	260	}
rgrover1	710:b2e1a2660ec2	261
rgrover1	710:b2e1a2660ec2	262	/**
vcoubard	1056:ce2fb3d09929	263	* @return Minimum Advertising interval in milliseconds for scannable
vcoubard	1056:ce2fb3d09929	264	* undirected and non-connectable undirected event types.
rgrover1	710:b2e1a2660ec2	265	*/
rgrover1	710:b2e1a2660ec2	266	virtual uint16_t getMinNonConnectableAdvertisingInterval(void) const {
rgrover1	742:861ed7eb186d	267	return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1	710:b2e1a2660ec2	268	}
rgrover1	710:b2e1a2660ec2	269
rgrover1	710:b2e1a2660ec2	270	/**
rgrover1	710:b2e1a2660ec2	271	* @return Maximum Advertising interval in milliseconds.
rgrover1	710:b2e1a2660ec2	272	*/
rgrover1	710:b2e1a2660ec2	273	virtual uint16_t getMaxAdvertisingInterval(void) const {
rgrover1	742:861ed7eb186d	274	return 0xFFFF; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1	710:b2e1a2660ec2	275	}
rgrover1	710:b2e1a2660ec2	276
rgrover1	710:b2e1a2660ec2	277	virtual ble_error_t stopAdvertising(void) {
rgrover1	728:997ba5e7b3b6	278	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1	710:b2e1a2660ec2	279	}
rgrover1	710:b2e1a2660ec2	280
rgrover1	710:b2e1a2660ec2	281	/**
rgrover1	710:b2e1a2660ec2	282	* Stop scanning. The current scanning parameters remain in effect.
rgrover1	710:b2e1a2660ec2	283	*
rgrover1	710:b2e1a2660ec2	284	* @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
rgrover1	710:b2e1a2660ec2	285	*/
rgrover1	710:b2e1a2660ec2	286	virtual ble_error_t stopScan() {
rgrover1	728:997ba5e7b3b6	287	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1	710:b2e1a2660ec2	288	}
rgrover1	710:b2e1a2660ec2	289
rgrover1	710:b2e1a2660ec2	290	/**
rgrover1	710:b2e1a2660ec2	291	* Create a connection (GAP Link Establishment).
rgrover1	710:b2e1a2660ec2	292	*
rgrover1	710:b2e1a2660ec2	293	* @param peerAddr
rgrover1	710:b2e1a2660ec2	294	* 48-bit address, LSB format.
rgrover1	710:b2e1a2660ec2	295	* @param peerAddrType
rgrover1	710:b2e1a2660ec2	296	* Address type of the peer.
rgrover1	710:b2e1a2660ec2	297	* @param connectionParams
rgrover1	710:b2e1a2660ec2	298	* Connection parameters.
rgrover1	710:b2e1a2660ec2	299	* @param scanParams
rgrover1	710:b2e1a2660ec2	300	* Paramters to be used while scanning for the peer.
rgrover1	710:b2e1a2660ec2	301	* @return BLE_ERROR_NONE if connection establishment procedure is started
rgrover1	829:9072de50087b	302	* successfully. The connectionCallChain (if set) will be invoked upon
rgrover1	710:b2e1a2660ec2	303	* a connection event.
rgrover1	710:b2e1a2660ec2	304	*/
vcoubard	1115:82d4a8a56d91	305	virtual ble_error_t connect(const BLEProtocol::AddressBytes_t peerAddr,
vcoubard	1117:421bdb7c5711	306	BLEProtocol::AddressType_t peerAddrType,
vcoubard	1117:421bdb7c5711	307	const ConnectionParams_t *connectionParams,
vcoubard	1117:421bdb7c5711	308	const GapScanningParams *scanParams) {
vcoubard	1048:efb29faf12fc	309	/* Avoid compiler warnings about unused variables. */
rgrover1	734:4872b70437ce	310	(void)peerAddr;
rgrover1	734:4872b70437ce	311	(void)peerAddrType;
rgrover1	734:4872b70437ce	312	(void)connectionParams;
rgrover1	734:4872b70437ce	313	(void)scanParams;
rgrover1	734:4872b70437ce	314
rgrover1	728:997ba5e7b3b6	315	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1	710:b2e1a2660ec2	316	}
rgrover1	710:b2e1a2660ec2	317
rgrover1	710:b2e1a2660ec2	318	/**
vcoubard	1116:9cb51490b3f7	319	* Create a connection (GAP Link Establishment).
vcoubard	1116:9cb51490b3f7	320	*
vcoubard	1116:9cb51490b3f7	321	* \deprecated: This funtion overloads Gap::connect(const BLEProtocol::Address_t peerAddr,
vcoubard	1116:9cb51490b3f7	322	BLEProtocol::AddressType_t peerAddrType,
vcoubard	1116:9cb51490b3f7	323	const ConnectionParams_t *connectionParams,
vcoubard	1116:9cb51490b3f7	324	const GapScanningParams *scanParams)
vcoubard	1116:9cb51490b3f7	325	* to maintain backward compatibility for change from Gap::AddressType_t to BLEProtocol::AddressType_t
vcoubard	1116:9cb51490b3f7	326	*/
vcoubard	1117:421bdb7c5711	327	ble_error_t connect(const BLEProtocol::AddressBytes_t peerAddr,
vcoubard	1117:421bdb7c5711	328	DeprecatedAddressType_t peerAddrType,
vcoubard	1117:421bdb7c5711	329	const ConnectionParams_t *connectionParams,
vcoubard	1117:421bdb7c5711	330	const GapScanningParams *scanParams)
vcoubard	1116:9cb51490b3f7	331	__deprecated_message("Gap::DeprecatedAddressType_t is deprecated, use BLEProtocol::AddressType_t instead") {
vcoubard	1116:9cb51490b3f7	332	return connect(peerAddr, (BLEProtocol::AddressType_t) peerAddrType, connectionParams, scanParams);
vcoubard	1116:9cb51490b3f7	333	}
vcoubard	1116:9cb51490b3f7	334
vcoubard	1116:9cb51490b3f7	335	/**
rgrover1	710:b2e1a2660ec2	336	* This call initiates the disconnection procedure, and its completion will
rgrover1	710:b2e1a2660ec2	337	* be communicated to the application with an invocation of the
rgrover1	710:b2e1a2660ec2	338	* disconnectionCallback.
rgrover1	710:b2e1a2660ec2	339	*
rgrover1	710:b2e1a2660ec2	340	* @param reason
vcoubard	1048:efb29faf12fc	341	* The reason for disconnection; to be sent back to the peer.
rgrover1	710:b2e1a2660ec2	342	*/
rgrover1	710:b2e1a2660ec2	343	virtual ble_error_t disconnect(Handle_t connectionHandle, DisconnectionReason_t reason) {
rgrover1	734:4872b70437ce	344	/* avoid compiler warnings about unused variables */
rgrover1	734:4872b70437ce	345	(void)connectionHandle;
rgrover1	734:4872b70437ce	346	(void)reason;
rgrover1	734:4872b70437ce	347
rgrover1	728:997ba5e7b3b6	348	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1	710:b2e1a2660ec2	349	}
rgrover1	710:b2e1a2660ec2	350
rgrover1	710:b2e1a2660ec2	351	/**
rgrover1	710:b2e1a2660ec2	352	* This call initiates the disconnection procedure, and its completion will
rgrover1	710:b2e1a2660ec2	353	* be communicated to the application with an invocation of the
rgrover1	710:b2e1a2660ec2	354	* disconnectionCallback.
rgrover1	710:b2e1a2660ec2	355	*
rgrover1	710:b2e1a2660ec2	356	* @param reason
vcoubard	1048:efb29faf12fc	357	* The reason for disconnection; to be sent back to the peer.
rgrover1	710:b2e1a2660ec2	358	*
vcoubard	1048:efb29faf12fc	359	* @note: This version of disconnect() doesn't take a connection handle. It
vcoubard	1048:efb29faf12fc	360	* works reliably only for stacks that are limited to a single
rgrover1	710:b2e1a2660ec2	361	* connection. This API should be considered deprecated in favour of the
vcoubard	1048:efb29faf12fc	362	* alternative, which takes a connection handle. It will be dropped in the future.
rgrover1	710:b2e1a2660ec2	363	*/
rgrover1	710:b2e1a2660ec2	364	virtual ble_error_t disconnect(DisconnectionReason_t reason) {
vcoubard	1048:efb29faf12fc	365	/* Avoid compiler warnings about unused variables. */
rgrover1	734:4872b70437ce	366	(void)reason;
rgrover1	734:4872b70437ce	367
rgrover1	728:997ba5e7b3b6	368	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1	710:b2e1a2660ec2	369	}
rgrover1	710:b2e1a2660ec2	370
rgrover1	710:b2e1a2660ec2	371	/**
rgrover1	710:b2e1a2660ec2	372	* Get the GAP peripheral preferred connection parameters. These are the
rgrover1	710:b2e1a2660ec2	373	* defaults that the peripheral would like to have in a connection. The
rgrover1	710:b2e1a2660ec2	374	* choice of the connection parameters is eventually up to the central.
rgrover1	710:b2e1a2660ec2	375	*
rgrover1	710:b2e1a2660ec2	376	* @param[out] params
rgrover1	710:b2e1a2660ec2	377	* The structure where the parameters will be stored. Memory
rgrover1	710:b2e1a2660ec2	378	* for this is owned by the caller.
rgrover1	710:b2e1a2660ec2	379	*
rgrover1	710:b2e1a2660ec2	380	* @return BLE_ERROR_NONE if the parameters were successfully filled into
rgrover1	710:b2e1a2660ec2	381	* the given structure pointed to by params.
rgrover1	710:b2e1a2660ec2	382	*/
rgrover1	710:b2e1a2660ec2	383	virtual ble_error_t getPreferredConnectionParams(ConnectionParams_t *params) {
vcoubard	1048:efb29faf12fc	384	/* Avoid compiler warnings about unused variables. */
rgrover1	734:4872b70437ce	385	(void)params;
rgrover1	734:4872b70437ce	386
rgrover1	728:997ba5e7b3b6	387	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1	710:b2e1a2660ec2	388	}
rgrover1	710:b2e1a2660ec2	389
rgrover1	710:b2e1a2660ec2	390	/**
rgrover1	710:b2e1a2660ec2	391	* Set the GAP peripheral preferred connection parameters. These are the
rgrover1	710:b2e1a2660ec2	392	* defaults that the peripheral would like to have in a connection. The
rgrover1	710:b2e1a2660ec2	393	* choice of the connection parameters is eventually up to the central.
rgrover1	710:b2e1a2660ec2	394	*
rgrover1	710:b2e1a2660ec2	395	* @param[in] params
rgrover1	710:b2e1a2660ec2	396	* The structure containing the desired parameters.
rgrover1	710:b2e1a2660ec2	397	*/
rgrover1	710:b2e1a2660ec2	398	virtual ble_error_t setPreferredConnectionParams(const ConnectionParams_t *params) {
vcoubard	1048:efb29faf12fc	399	/* Avoid compiler warnings about unused variables. */
rgrover1	734:4872b70437ce	400	(void)params;
rgrover1	734:4872b70437ce	401
rgrover1	728:997ba5e7b3b6	402	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1	710:b2e1a2660ec2	403	}
rgrover1	710:b2e1a2660ec2	404
rgrover1	710:b2e1a2660ec2	405	/**
rgrover1	816:2b4f0ef8c06e	406	* Update connection parameters.
vcoubard	1048:efb29faf12fc	407	* In the central role this will initiate a Link Layer connection parameter update procedure.
vcoubard	1048:efb29faf12fc	408	* In the peripheral role, this will send the corresponding L2CAP request and wait for
rgrover1	816:2b4f0ef8c06e	409	* the central to perform the procedure.
rgrover1	816:2b4f0ef8c06e	410	*
rgrover1	710:b2e1a2660ec2	411	* @param[in] handle
vcoubard	1048:efb29faf12fc	412	* Connection Handle.
rgrover1	710:b2e1a2660ec2	413	* @param[in] params
rgrover1	710:b2e1a2660ec2	414	* Pointer to desired connection parameters. If NULL is provided on a peripheral role,
rgrover1	710:b2e1a2660ec2	415	* the parameters in the PPCP characteristic of the GAP service will be used instead.
rgrover1	710:b2e1a2660ec2	416	*/
rgrover1	710:b2e1a2660ec2	417	virtual ble_error_t updateConnectionParams(Handle_t handle, const ConnectionParams_t *params) {
rgrover1	734:4872b70437ce	418	/* avoid compiler warnings about unused variables */
rgrover1	734:4872b70437ce	419	(void)handle;
rgrover1	734:4872b70437ce	420	(void)params;
rgrover1	734:4872b70437ce	421
rgrover1	728:997ba5e7b3b6	422	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1	710:b2e1a2660ec2	423	}
rgrover1	710:b2e1a2660ec2	424
rgrover1	710:b2e1a2660ec2	425	/**
rgrover1	710:b2e1a2660ec2	426	* Set the device name characteristic in the GAP service.
rgrover1	710:b2e1a2660ec2	427	* @param[in] deviceName
rgrover1	710:b2e1a2660ec2	428	* The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
rgrover1	710:b2e1a2660ec2	429	*/
rgrover1	710:b2e1a2660ec2	430	virtual ble_error_t setDeviceName(const uint8_t *deviceName) {
vcoubard	1048:efb29faf12fc	431	/* Avoid compiler warnings about unused variables. */
rgrover1	734:4872b70437ce	432	(void)deviceName;
rgrover1	734:4872b70437ce	433
rgrover1	728:997ba5e7b3b6	434	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1	710:b2e1a2660ec2	435	}
rgrover1	710:b2e1a2660ec2	436
rgrover1	710:b2e1a2660ec2	437	/**
rgrover1	710:b2e1a2660ec2	438	* Get the value of the device name characteristic in the GAP service.
rgrover1	710:b2e1a2660ec2	439	* @param[out] deviceName
rgrover1	710:b2e1a2660ec2	440	* Pointer to an empty buffer where the UTF-8 *non NULL-
rgrover1	710:b2e1a2660ec2	441	* terminated* string will be placed. Set this
rgrover1	710:b2e1a2660ec2	442	* value to NULL in order to obtain the deviceName-length
rgrover1	710:b2e1a2660ec2	443	* from the 'length' parameter.
rgrover1	710:b2e1a2660ec2	444	*
rgrover1	710:b2e1a2660ec2	445	* @param[in/out] lengthP
rgrover1	710:b2e1a2660ec2	446	* (on input) Length of the buffer pointed to by deviceName;
rgrover1	710:b2e1a2660ec2	447	* (on output) the complete device name length (without the
rgrover1	710:b2e1a2660ec2	448	* null terminator).
rgrover1	710:b2e1a2660ec2	449	*
rgrover1	710:b2e1a2660ec2	450	* @note If the device name is longer than the size of the supplied buffer,
rgrover1	710:b2e1a2660ec2	451	* length will return the complete device name length, and not the
rgrover1	710:b2e1a2660ec2	452	* number of bytes actually returned in deviceName. The application may
rgrover1	710:b2e1a2660ec2	453	* use this information to retry with a suitable buffer size.
rgrover1	710:b2e1a2660ec2	454	*/
rgrover1	710:b2e1a2660ec2	455	virtual ble_error_t getDeviceName(uint8_t deviceName, unsigned lengthP) {
rgrover1	734:4872b70437ce	456	/* avoid compiler warnings about unused variables */
rgrover1	734:4872b70437ce	457	(void)deviceName;
rgrover1	734:4872b70437ce	458	(void)lengthP;
rgrover1	734:4872b70437ce	459
rgrover1	728:997ba5e7b3b6	460	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1	710:b2e1a2660ec2	461	}
rgrover1	710:b2e1a2660ec2	462
rgrover1	710:b2e1a2660ec2	463	/**
rgrover1	710:b2e1a2660ec2	464	* Set the appearance characteristic in the GAP service.
rgrover1	710:b2e1a2660ec2	465	* @param[in] appearance
rgrover1	710:b2e1a2660ec2	466	* The new value for the device-appearance.
rgrover1	710:b2e1a2660ec2	467	*/
rgrover1	710:b2e1a2660ec2	468	virtual ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
vcoubard	1048:efb29faf12fc	469	/* Avoid compiler warnings about unused variables. */
rgrover1	734:4872b70437ce	470	(void)appearance;
rgrover1	734:4872b70437ce	471
rgrover1	728:997ba5e7b3b6	472	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1	710:b2e1a2660ec2	473	}
rgrover1	710:b2e1a2660ec2	474
rgrover1	710:b2e1a2660ec2	475	/**
rgrover1	710:b2e1a2660ec2	476	* Get the appearance characteristic in the GAP service.
rgrover1	710:b2e1a2660ec2	477	* @param[out] appearance
rgrover1	710:b2e1a2660ec2	478	* The new value for the device-appearance.
rgrover1	710:b2e1a2660ec2	479	*/
rgrover1	710:b2e1a2660ec2	480	virtual ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
vcoubard	1048:efb29faf12fc	481	/* Avoid compiler warnings about unused variables. */
rgrover1	734:4872b70437ce	482	(void)appearanceP;
rgrover1	734:4872b70437ce	483
rgrover1	728:997ba5e7b3b6	484	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1	710:b2e1a2660ec2	485	}
rgrover1	710:b2e1a2660ec2	486
rgrover1	710:b2e1a2660ec2	487	/**
rgrover1	710:b2e1a2660ec2	488	* Set the radio's transmit power.
rgrover1	710:b2e1a2660ec2	489	* @param[in] txPower Radio transmit power in dBm.
rgrover1	710:b2e1a2660ec2	490	*/
rgrover1	710:b2e1a2660ec2	491	virtual ble_error_t setTxPower(int8_t txPower) {
vcoubard	1048:efb29faf12fc	492	/* Avoid compiler warnings about unused variables. */
rgrover1	734:4872b70437ce	493	(void)txPower;
rgrover1	734:4872b70437ce	494
rgrover1	728:997ba5e7b3b6	495	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1	710:b2e1a2660ec2	496	}
rgrover1	710:b2e1a2660ec2	497
rgrover1	710:b2e1a2660ec2	498	/**
rgrover1	710:b2e1a2660ec2	499	* Query the underlying stack for permitted arguments for setTxPower().
rgrover1	710:b2e1a2660ec2	500	*
rgrover1	710:b2e1a2660ec2	501	* @param[out] valueArrayPP
rgrover1	710:b2e1a2660ec2	502	* Out parameter to receive the immutable array of Tx values.
rgrover1	710:b2e1a2660ec2	503	* @param[out] countP
rgrover1	710:b2e1a2660ec2	504	* Out parameter to receive the array's size.
rgrover1	710:b2e1a2660ec2	505	*/
rgrover1	710:b2e1a2660ec2	506	virtual void getPermittedTxPowerValues(const int8_t *valueArrayPP, size_t countP) {
vcoubard	1048:efb29faf12fc	507	/* Avoid compiler warnings about unused variables. */
rgrover1	734:4872b70437ce	508	(void)valueArrayPP;
rgrover1	734:4872b70437ce	509	(void)countP;
rgrover1	734:4872b70437ce	510
rgrover1	742:861ed7eb186d	511	countP = 0; / Requesting action from porter(s): override this API if this capability is supported. */
rgrover1	710:b2e1a2660ec2	512	}
rgrover1	710:b2e1a2660ec2	513
vcoubard	1118:88af68f0226b	514	/**
vcoubard	1118:88af68f0226b	515	* @return Maximum size of the whitelist.
vcoubard	1118:88af68f0226b	516	*/
vcoubard	1118:88af68f0226b	517	virtual uint8_t getMaxWhitelistSize(void) const
vcoubard	1118:88af68f0226b	518	{
vcoubard	1118:88af68f0226b	519	return BLE_ERROR_NOT_IMPLEMENTED;
vcoubard	1118:88af68f0226b	520	}
vcoubard	1118:88af68f0226b	521
vcoubard	1118:88af68f0226b	522	/**
vcoubard	1118:88af68f0226b	523	* Get the internal whitelist to be used by the Link Layer when scanning,
vcoubard	1118:88af68f0226b	524	* advertising or initiating a connection depending on the filter policies.
vcoubard	1118:88af68f0226b	525	*
vcoubard	1118:88af68f0226b	526	* @param[in/out] whitelist
vcoubard	1118:88af68f0226b	527	* (on input) whitelist.size contains the maximum number
vcoubard	1118:88af68f0226b	528	* of addresses to be returned.
vcoubard	1118:88af68f0226b	529	* (on output) The populated whitelist with copies of the
vcoubard	1118:88af68f0226b	530	* addresses in the implementation's whitelist.
vcoubard	1118:88af68f0226b	531	*
vcoubard	1118:88af68f0226b	532	* @return BLE_ERROR_NONE if the implementation's whitelist was successfully
vcoubard	1118:88af68f0226b	533	* copied into the supplied reference.
vcoubard	1118:88af68f0226b	534	*/
vcoubard	1118:88af68f0226b	535	virtual ble_error_t getWhitelist(Whitelist_t &whitelist) const
vcoubard	1118:88af68f0226b	536	{
vcoubard	1118:88af68f0226b	537	(void) whitelist;
vcoubard	1118:88af68f0226b	538	return BLE_ERROR_NOT_IMPLEMENTED;
vcoubard	1118:88af68f0226b	539	}
vcoubard	1118:88af68f0226b	540
vcoubard	1118:88af68f0226b	541	/**
vcoubard	1118:88af68f0226b	542	* Set the internal whitelist to be used by the Link Layer when scanning,
vcoubard	1118:88af68f0226b	543	* advertising or initiating a connection depending on the filter policies.
vcoubard	1118:88af68f0226b	544	*
vcoubard	1118:88af68f0226b	545	* @param[out] whitelist
vcoubard	1118:88af68f0226b	546	* A reference to a whitelist containing the addresses to
vcoubard	1118:88af68f0226b	547	* be added to the internal whitelist.
vcoubard	1118:88af68f0226b	548	*
vcoubard	1118:88af68f0226b	549	* @return BLE_ERROR_NONE if the implementation's whitelist was successfully
vcoubard	1118:88af68f0226b	550	* populated with the addresses in the given whitelist.
vcoubard	1118:88af68f0226b	551	*
vcoubard	1118:88af68f0226b	552	* @note The whitelist must not contain addresses of type @ref
vcoubard	1118:88af68f0226b	553	* BLEProtocol::AddressType_t::RANDOM_PRIVATE_NON_RESOLVABLE, this
vcoubard	1118:88af68f0226b	554	* this will result in a @ref BLE_ERROR_INVALID_PARAM since the
vcoubard	1118:88af68f0226b	555	* remote peer might change its private address at any time and it
vcoubard	1118:88af68f0226b	556	* is not possible to resolve it.
vcoubard	1118:88af68f0226b	557	* @note If the input whitelist is larger than @ref getMaxWhitelistSize()
vcoubard	1118:88af68f0226b	558	* the @ref BLE_ERROR_PARAM_OUT_OF_RANGE is returned.
vcoubard	1118:88af68f0226b	559	*/
vcoubard	1118:88af68f0226b	560	virtual ble_error_t setWhitelist(Whitelist_t &whitelist)
vcoubard	1118:88af68f0226b	561	{
vcoubard	1118:88af68f0226b	562	(void) whitelist;
vcoubard	1118:88af68f0226b	563	return BLE_ERROR_NOT_IMPLEMENTED;
vcoubard	1118:88af68f0226b	564	}
vcoubard	1118:88af68f0226b	565
vcoubard	1118:88af68f0226b	566	/**
vcoubard	1118:88af68f0226b	567	* Set the advertising policy filter mode to be used in the next call
vcoubard	1118:88af68f0226b	568	* to startAdvertising().
vcoubard	1118:88af68f0226b	569	*
vcoubard	1118:88af68f0226b	570	* @param[in] mode
vcoubard	1118:88af68f0226b	571	* The new advertising policy filter mode.
vcoubard	1118:88af68f0226b	572	*/
vcoubard	1118:88af68f0226b	573	virtual void setAdvertisingPolicyMode(AdvertisingPolicyMode_t mode)
vcoubard	1118:88af68f0226b	574	{
vcoubard	1118:88af68f0226b	575	(void) mode;
vcoubard	1118:88af68f0226b	576	}
vcoubard	1118:88af68f0226b	577
vcoubard	1118:88af68f0226b	578	/**
vcoubard	1118:88af68f0226b	579	* Set the scan policy filter mode to be used in the next call
vcoubard	1118:88af68f0226b	580	* to startScan().
vcoubard	1118:88af68f0226b	581	*
vcoubard	1118:88af68f0226b	582	* @param[in] mode
vcoubard	1118:88af68f0226b	583	* The new scan policy filter mode.
vcoubard	1118:88af68f0226b	584	*/
vcoubard	1118:88af68f0226b	585	virtual void setScanningPolicyMode(ScanningPolicyMode_t mode)
vcoubard	1118:88af68f0226b	586	{
vcoubard	1118:88af68f0226b	587	(void) mode;
vcoubard	1118:88af68f0226b	588	}
vcoubard	1118:88af68f0226b	589
vcoubard	1118:88af68f0226b	590	/**
vcoubard	1118:88af68f0226b	591	* Set the initiator policy filter mode to be used.
vcoubard	1118:88af68f0226b	592	*
vcoubard	1118:88af68f0226b	593	* @param[in] mode
vcoubard	1118:88af68f0226b	594	* The new initiator policy filter mode.
vcoubard	1118:88af68f0226b	595	*/
vcoubard	1118:88af68f0226b	596	virtual void setInitiatorPolicyMode(InitiatorPolicyMode_t mode)
vcoubard	1118:88af68f0226b	597	{
vcoubard	1118:88af68f0226b	598	(void) mode;
vcoubard	1118:88af68f0226b	599	}
vcoubard	1118:88af68f0226b	600
vcoubard	1118:88af68f0226b	601	/**
vcoubard	1118:88af68f0226b	602	* Get the advertising policy filter mode that will be used in the next
vcoubard	1118:88af68f0226b	603	* call to startAdvertising().
vcoubard	1118:88af68f0226b	604	*
vcoubard	1118:88af68f0226b	605	* @return The set advertising policy filter mode.
vcoubard	1118:88af68f0226b	606	*/
vcoubard	1118:88af68f0226b	607	virtual AdvertisingPolicyMode_t getAdvertisingPolicyMode(void) const
vcoubard	1118:88af68f0226b	608	{
vcoubard	1118:88af68f0226b	609	return ADV_POLICY_IGNORE_WHITELIST;
vcoubard	1118:88af68f0226b	610	}
vcoubard	1118:88af68f0226b	611
vcoubard	1118:88af68f0226b	612	/**
vcoubard	1118:88af68f0226b	613	* Get the scan policy filter mode that will be used in the next
vcoubard	1118:88af68f0226b	614	* call to startScan().
vcoubard	1118:88af68f0226b	615	*
vcoubard	1118:88af68f0226b	616	* @return The set scan policy filter mode.
vcoubard	1118:88af68f0226b	617	*/
vcoubard	1118:88af68f0226b	618	virtual ScanningPolicyMode_t getScanningPolicyMode(void) const
vcoubard	1118:88af68f0226b	619	{
vcoubard	1118:88af68f0226b	620	return SCAN_POLICY_IGNORE_WHITELIST;
vcoubard	1118:88af68f0226b	621	}
vcoubard	1118:88af68f0226b	622
vcoubard	1118:88af68f0226b	623	/**
vcoubard	1118:88af68f0226b	624	* Get the initiator policy filter mode that will be used.
vcoubard	1118:88af68f0226b	625	*
vcoubard	1118:88af68f0226b	626	* @return The set scan policy filter mode.
vcoubard	1118:88af68f0226b	627	*/
vcoubard	1118:88af68f0226b	628	virtual InitiatorPolicyMode_t getInitiatorPolicyMode(void) const
vcoubard	1118:88af68f0226b	629	{
vcoubard	1118:88af68f0226b	630	return INIT_POLICY_IGNORE_WHITELIST;
vcoubard	1118:88af68f0226b	631	}
vcoubard	1118:88af68f0226b	632
vcoubard	1118:88af68f0226b	633
rgrover1	710:b2e1a2660ec2	634	protected:
rgrover1	710:b2e1a2660ec2	635	/* Override the following in the underlying adaptation layer to provide the functionality of scanning. */
rgrover1	710:b2e1a2660ec2	636	virtual ble_error_t startRadioScan(const GapScanningParams &scanningParams) {
rgrover1	772:b6d27ab66c94	637	(void)scanningParams;
rgrover1	728:997ba5e7b3b6	638	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1	710:b2e1a2660ec2	639	}
rgrover1	710:b2e1a2660ec2	640
rgrover1	710:b2e1a2660ec2	641	/*
rgrover1	710:b2e1a2660ec2	642	* APIs with non-virtual implementations.
rgrover1	710:b2e1a2660ec2	643	*/
rgrover1	710:b2e1a2660ec2	644	public:
rgrover1	710:b2e1a2660ec2	645	/**
vcoubard	1048:efb29faf12fc	646	* Returns the current GAP state of the device using a bitmask that
vcoubard	1048:efb29faf12fc	647	* describes whether the device is advertising or connected.
rgrover1	710:b2e1a2660ec2	648	*/
rgrover1	710:b2e1a2660ec2	649	GapState_t getState(void) const {
rgrover1	710:b2e1a2660ec2	650	return state;
rgrover1	710:b2e1a2660ec2	651	}
rgrover1	710:b2e1a2660ec2	652
rgrover1	710:b2e1a2660ec2	653	/**
rgrover1	710:b2e1a2660ec2	654	* Set the GAP advertising mode to use for this device.
rgrover1	710:b2e1a2660ec2	655	*/
rgrover1	710:b2e1a2660ec2	656	void setAdvertisingType(GapAdvertisingParams::AdvertisingType_t advType) {
rgrover1	710:b2e1a2660ec2	657	_advParams.setAdvertisingType(advType);
rgrover1	710:b2e1a2660ec2	658	}
rgrover1	710:b2e1a2660ec2	659
rgrover1	710:b2e1a2660ec2	660	/**
rgrover1	710:b2e1a2660ec2	661	* @param[in] interval
rgrover1	710:b2e1a2660ec2	662	* Advertising interval in units of milliseconds. Advertising
rgrover1	710:b2e1a2660ec2	663	* is disabled if interval is 0. If interval is smaller than
rgrover1	710:b2e1a2660ec2	664	* the minimum supported value, then the minimum supported
rgrover1	710:b2e1a2660ec2	665	* value is used instead. This minimum value can be discovered
rgrover1	710:b2e1a2660ec2	666	* using getMinAdvertisingInterval().
rgrover1	710:b2e1a2660ec2	667	*
rgrover1	710:b2e1a2660ec2	668	* This field must be set to 0 if connectionMode is equal
rgrover1	710:b2e1a2660ec2	669	* to ADV_CONNECTABLE_DIRECTED.
rgrover1	710:b2e1a2660ec2	670	*
rgrover1	710:b2e1a2660ec2	671	* @note: Decreasing this value will allow central devices to detect a
vcoubard	1048:efb29faf12fc	672	* peripheral faster, at the expense of more power being used by the radio
rgrover1	710:b2e1a2660ec2	673	* due to the higher data transmit rate.
rgrover1	710:b2e1a2660ec2	674	*
rgrover1	710:b2e1a2660ec2	675	* @Note: [WARNING] This API previously used 0.625ms as the unit for its
rgrover1	710:b2e1a2660ec2	676	* 'interval' argument. That required an explicit conversion from
rgrover1	710:b2e1a2660ec2	677	* milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
rgrover1	710:b2e1a2660ec2	678	* no longer required as the new units are milliseconds. Any application
vcoubard	1048:efb29faf12fc	679	* code depending on the old semantics needs to be updated accordingly.
rgrover1	710:b2e1a2660ec2	680	*/
rgrover1	710:b2e1a2660ec2	681	void setAdvertisingInterval(uint16_t interval) {
rgrover1	710:b2e1a2660ec2	682	if (interval == 0) {
rgrover1	710:b2e1a2660ec2	683	stopAdvertising();
rgrover1	710:b2e1a2660ec2	684	} else if (interval < getMinAdvertisingInterval()) {
rgrover1	710:b2e1a2660ec2	685	interval = getMinAdvertisingInterval();
rgrover1	710:b2e1a2660ec2	686	}
rgrover1	786:d6d7087d8377	687	_advParams.setInterval(interval);
rgrover1	710:b2e1a2660ec2	688	}
rgrover1	710:b2e1a2660ec2	689
rgrover1	710:b2e1a2660ec2	690	/**
rgrover1	710:b2e1a2660ec2	691	* @param[in] timeout
rgrover1	710:b2e1a2660ec2	692	* Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
rgrover1	710:b2e1a2660ec2	693	* and 16383). Use 0 to disable the advertising timeout.
rgrover1	710:b2e1a2660ec2	694	*/
rgrover1	710:b2e1a2660ec2	695	void setAdvertisingTimeout(uint16_t timeout) {
rgrover1	710:b2e1a2660ec2	696	_advParams.setTimeout(timeout);
rgrover1	710:b2e1a2660ec2	697	}
rgrover1	710:b2e1a2660ec2	698
rgrover1	710:b2e1a2660ec2	699	/**
rgrover1	710:b2e1a2660ec2	700	* Start advertising.
rgrover1	710:b2e1a2660ec2	701	*/
rgrover1	710:b2e1a2660ec2	702	ble_error_t startAdvertising(void) {
vcoubard	1048:efb29faf12fc	703	setAdvertisingData(); /* Update the underlying stack. */
rgrover1	710:b2e1a2660ec2	704	return startAdvertising(_advParams);
rgrover1	710:b2e1a2660ec2	705	}
rgrover1	710:b2e1a2660ec2	706
rgrover1	710:b2e1a2660ec2	707	/**
rgrover1	710:b2e1a2660ec2	708	* Reset any advertising payload prepared from prior calls to
rgrover1	710:b2e1a2660ec2	709	* accumulateAdvertisingPayload(). This automatically propagates the re-
vcoubard	1048:efb29faf12fc	710	* initialized advertising payload to the underlying stack.
rgrover1	710:b2e1a2660ec2	711	*/
rgrover1	710:b2e1a2660ec2	712	void clearAdvertisingPayload(void) {
rgrover1	710:b2e1a2660ec2	713	_advPayload.clear();
rgrover1	710:b2e1a2660ec2	714	setAdvertisingData();
rgrover1	710:b2e1a2660ec2	715	}
rgrover1	710:b2e1a2660ec2	716
rgrover1	710:b2e1a2660ec2	717	/**
rgrover1	710:b2e1a2660ec2	718	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	710:b2e1a2660ec2	719	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard	1048:efb29faf12fc	720	* as an additional 31 bytes if the advertising payload is too
rgrover1	710:b2e1a2660ec2	721	* small.
rgrover1	710:b2e1a2660ec2	722	*
rgrover1	710:b2e1a2660ec2	723	* @param[in] flags
rgrover1	710:b2e1a2660ec2	724	* The flags to be added. Please refer to
rgrover1	710:b2e1a2660ec2	725	* GapAdvertisingData::Flags for valid flags. Multiple
rgrover1	710:b2e1a2660ec2	726	* flags may be specified in combination.
rgrover1	710:b2e1a2660ec2	727	*/
rgrover1	710:b2e1a2660ec2	728	ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
rgrover1	710:b2e1a2660ec2	729	ble_error_t rc;
rgrover1	710:b2e1a2660ec2	730	if ((rc = _advPayload.addFlags(flags)) != BLE_ERROR_NONE) {
rgrover1	710:b2e1a2660ec2	731	return rc;
rgrover1	710:b2e1a2660ec2	732	}
rgrover1	710:b2e1a2660ec2	733
rgrover1	710:b2e1a2660ec2	734	return setAdvertisingData();
rgrover1	710:b2e1a2660ec2	735	}
rgrover1	710:b2e1a2660ec2	736
rgrover1	710:b2e1a2660ec2	737	/**
rgrover1	710:b2e1a2660ec2	738	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	710:b2e1a2660ec2	739	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard	1048:efb29faf12fc	740	* as an additional 31 bytes if the advertising payload is too
rgrover1	710:b2e1a2660ec2	741	* small.
rgrover1	710:b2e1a2660ec2	742	*
rgrover1	710:b2e1a2660ec2	743	* @param app
rgrover1	710:b2e1a2660ec2	744	* The appearance of the peripheral.
rgrover1	710:b2e1a2660ec2	745	*/
rgrover1	710:b2e1a2660ec2	746	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
rgrover1	710:b2e1a2660ec2	747	setAppearance(app);
rgrover1	710:b2e1a2660ec2	748
rgrover1	710:b2e1a2660ec2	749	ble_error_t rc;
rgrover1	710:b2e1a2660ec2	750	if ((rc = _advPayload.addAppearance(app)) != BLE_ERROR_NONE) {
rgrover1	710:b2e1a2660ec2	751	return rc;
rgrover1	710:b2e1a2660ec2	752	}
rgrover1	710:b2e1a2660ec2	753
rgrover1	710:b2e1a2660ec2	754	return setAdvertisingData();
rgrover1	710:b2e1a2660ec2	755	}
rgrover1	710:b2e1a2660ec2	756
rgrover1	710:b2e1a2660ec2	757	/**
rgrover1	710:b2e1a2660ec2	758	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	710:b2e1a2660ec2	759	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard	1048:efb29faf12fc	760	* as an additional 31 bytes if the advertising payload is too
rgrover1	710:b2e1a2660ec2	761	* small.
rgrover1	710:b2e1a2660ec2	762	*
vcoubard	1048:efb29faf12fc	763	* @param power
rgrover1	764:1e560f0d45e1	764	* The max transmit power to be used by the controller (in dBm).
rgrover1	710:b2e1a2660ec2	765	*/
rgrover1	710:b2e1a2660ec2	766	ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
rgrover1	710:b2e1a2660ec2	767	ble_error_t rc;
rgrover1	710:b2e1a2660ec2	768	if ((rc = _advPayload.addTxPower(power)) != BLE_ERROR_NONE) {
rgrover1	710:b2e1a2660ec2	769	return rc;
rgrover1	710:b2e1a2660ec2	770	}
rgrover1	710:b2e1a2660ec2	771
rgrover1	710:b2e1a2660ec2	772	return setAdvertisingData();
rgrover1	710:b2e1a2660ec2	773	}
rgrover1	710:b2e1a2660ec2	774
rgrover1	710:b2e1a2660ec2	775	/**
rgrover1	710:b2e1a2660ec2	776	* Accumulate a variable length byte-stream as an AD structure in the
rgrover1	710:b2e1a2660ec2	777	* advertising payload. Please note that the payload is limited to 31 bytes.
rgrover1	710:b2e1a2660ec2	778	* The SCAN_RESPONSE message may be used as an additional 31 bytes if the
vcoubard	1048:efb29faf12fc	779	* advertising payload is too small.
rgrover1	710:b2e1a2660ec2	780	*
vcoubard	1048:efb29faf12fc	781	* @param type The type describing the variable length data.
vcoubard	1048:efb29faf12fc	782	* @param data Data bytes.
vcoubard	1048:efb29faf12fc	783	* @param len Length of data.
vcoubard	1104:0244fbb0324e	784	*
vcoubard	1104:0244fbb0324e	785	* @return BLE_ERROR_NONE if the advertisement payload was updated based on
vcoubard	1104:0244fbb0324e	786	* matching AD type; otherwise, an appropriate error.
vcoubard	1104:0244fbb0324e	787	*
vcoubard	1104:0244fbb0324e	788	* @note When the specified AD type is INCOMPLETE_LIST_16BIT_SERVICE_IDS,
vcoubard	1104:0244fbb0324e	789	* COMPLETE_LIST_16BIT_SERVICE_IDS, INCOMPLETE_LIST_32BIT_SERVICE_IDS,
vcoubard	1104:0244fbb0324e	790	* COMPLETE_LIST_32BIT_SERVICE_IDS, INCOMPLETE_LIST_128BIT_SERVICE_IDS,
vcoubard	1104:0244fbb0324e	791	* COMPLETE_LIST_128BIT_SERVICE_IDS or LIST_128BIT_SOLICITATION_IDS the
vcoubard	1104:0244fbb0324e	792	* supplied value is appended to the values previously added to the
vcoubard	1104:0244fbb0324e	793	* payload.
rgrover1	710:b2e1a2660ec2	794	*/
rgrover1	710:b2e1a2660ec2	795	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1	710:b2e1a2660ec2	796	if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
rgrover1	710:b2e1a2660ec2	797	setDeviceName(data);
rgrover1	710:b2e1a2660ec2	798	}
rgrover1	710:b2e1a2660ec2	799
rgrover1	710:b2e1a2660ec2	800	ble_error_t rc;
rgrover1	710:b2e1a2660ec2	801	if ((rc = _advPayload.addData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1	710:b2e1a2660ec2	802	return rc;
rgrover1	710:b2e1a2660ec2	803	}
rgrover1	710:b2e1a2660ec2	804
rgrover1	710:b2e1a2660ec2	805	return setAdvertisingData();
rgrover1	710:b2e1a2660ec2	806	}
rgrover1	710:b2e1a2660ec2	807
rgrover1	710:b2e1a2660ec2	808	/**
rgrover1	765:4cd91998cd48	809	* Update a particular ADV field in the advertising payload (based on
vcoubard	1104:0244fbb0324e	810	* matching type).
rgrover1	763:36c3e2b1f1ae	811	*
vcoubard	1048:efb29faf12fc	812	* @param[in] type The ADV type field describing the variable length data.
vcoubard	1048:efb29faf12fc	813	* @param[in] data Data bytes.
vcoubard	1048:efb29faf12fc	814	* @param[in] len Length of data.
rgrover1	765:4cd91998cd48	815	*
rgrover1	765:4cd91998cd48	816	* @note: If advertisements are enabled, then the update will take effect immediately.
rgrover1	765:4cd91998cd48	817	*
rgrover1	765:4cd91998cd48	818	* @return BLE_ERROR_NONE if the advertisement payload was updated based on
vcoubard	1104:0244fbb0324e	819	* matching AD type; otherwise, an appropriate error.
rgrover1	763:36c3e2b1f1ae	820	*/
rgrover1	763:36c3e2b1f1ae	821	ble_error_t updateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1	763:36c3e2b1f1ae	822	if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
rgrover1	763:36c3e2b1f1ae	823	setDeviceName(data);
rgrover1	763:36c3e2b1f1ae	824	}
rgrover1	763:36c3e2b1f1ae	825
rgrover1	763:36c3e2b1f1ae	826	ble_error_t rc;
rgrover1	763:36c3e2b1f1ae	827	if ((rc = _advPayload.updateData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1	763:36c3e2b1f1ae	828	return rc;
rgrover1	763:36c3e2b1f1ae	829	}
rgrover1	763:36c3e2b1f1ae	830
rgrover1	763:36c3e2b1f1ae	831	return setAdvertisingData();
rgrover1	763:36c3e2b1f1ae	832	}
rgrover1	763:36c3e2b1f1ae	833
rgrover1	763:36c3e2b1f1ae	834	/**
vcoubard	1048:efb29faf12fc	835	* Set up a particular, user-constructed advertisement payload for the
rgrover1	710:b2e1a2660ec2	836	* underlying stack. It would be uncommon for this API to be used directly;
rgrover1	710:b2e1a2660ec2	837	* there are other APIs to build an advertisement payload (see above).
rgrover1	710:b2e1a2660ec2	838	*/
rgrover1	710:b2e1a2660ec2	839	ble_error_t setAdvertisingPayload(const GapAdvertisingData &payload) {
rgrover1	710:b2e1a2660ec2	840	_advPayload = payload;
rgrover1	710:b2e1a2660ec2	841	return setAdvertisingData();
rgrover1	710:b2e1a2660ec2	842	}
rgrover1	710:b2e1a2660ec2	843
rgrover1	710:b2e1a2660ec2	844	/**
rgrover1	710:b2e1a2660ec2	845	* @return Read back advertising data. Useful for storing and
rgrover1	710:b2e1a2660ec2	846	* restoring payload.
rgrover1	710:b2e1a2660ec2	847	*/
rgrover1	710:b2e1a2660ec2	848	const GapAdvertisingData &getAdvertisingPayload(void) const {
rgrover1	710:b2e1a2660ec2	849	return _advPayload;
rgrover1	710:b2e1a2660ec2	850	}
rgrover1	710:b2e1a2660ec2	851
rgrover1	710:b2e1a2660ec2	852	/**
rgrover1	710:b2e1a2660ec2	853	* Accumulate a variable length byte-stream as an AD structure in the
rgrover1	710:b2e1a2660ec2	854	* scanResponse payload.
rgrover1	710:b2e1a2660ec2	855	*
vcoubard	1048:efb29faf12fc	856	* @param[in] type The type describing the variable length data.
vcoubard	1048:efb29faf12fc	857	* @param[in] data Data bytes.
vcoubard	1048:efb29faf12fc	858	* @param[in] len Length of data.
rgrover1	710:b2e1a2660ec2	859	*/
rgrover1	710:b2e1a2660ec2	860	ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1	710:b2e1a2660ec2	861	ble_error_t rc;
rgrover1	710:b2e1a2660ec2	862	if ((rc = _scanResponse.addData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1	710:b2e1a2660ec2	863	return rc;
rgrover1	710:b2e1a2660ec2	864	}
rgrover1	710:b2e1a2660ec2	865
rgrover1	710:b2e1a2660ec2	866	return setAdvertisingData();
rgrover1	710:b2e1a2660ec2	867	}
rgrover1	710:b2e1a2660ec2	868
rgrover1	710:b2e1a2660ec2	869	/**
rgrover1	710:b2e1a2660ec2	870	* Reset any scan response prepared from prior calls to
rgrover1	710:b2e1a2660ec2	871	* accumulateScanResponse().
rgrover1	710:b2e1a2660ec2	872	*
rgrover1	710:b2e1a2660ec2	873	* Note: This should be followed by a call to setAdvertisingPayload() or
rgrover1	710:b2e1a2660ec2	874	* startAdvertising() before the update takes effect.
rgrover1	710:b2e1a2660ec2	875	*/
rgrover1	710:b2e1a2660ec2	876	void clearScanResponse(void) {
rgrover1	710:b2e1a2660ec2	877	_scanResponse.clear();
rgrover1	710:b2e1a2660ec2	878	setAdvertisingData();
rgrover1	710:b2e1a2660ec2	879	}
rgrover1	710:b2e1a2660ec2	880
rgrover1	710:b2e1a2660ec2	881	/**
vcoubard	1048:efb29faf12fc	882	* Set up parameters for GAP scanning (observer mode).
rgrover1	710:b2e1a2660ec2	883	* @param[in] interval
rgrover1	710:b2e1a2660ec2	884	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	710:b2e1a2660ec2	885	* @param[in] window
rgrover1	710:b2e1a2660ec2	886	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	710:b2e1a2660ec2	887	* @param[in] timeout
vcoubard	1048:efb29faf12fc	888	* Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
rgrover1	710:b2e1a2660ec2	889	* @param[in] activeScanning
rgrover1	710:b2e1a2660ec2	890	* Set to True if active-scanning is required. This is used to fetch the
rgrover1	710:b2e1a2660ec2	891	* scan response from a peer if possible.
rgrover1	710:b2e1a2660ec2	892	*
rgrover1	710:b2e1a2660ec2	893	* The scanning window divided by the interval determines the duty cycle for
rgrover1	710:b2e1a2660ec2	894	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	710:b2e1a2660ec2	895	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	710:b2e1a2660ec2	896	* to have the interval and window set to the same value. In this case,
rgrover1	710:b2e1a2660ec2	897	* scanning is continuous, with a change of scanning frequency once every
rgrover1	710:b2e1a2660ec2	898	* interval.
rgrover1	710:b2e1a2660ec2	899	*
rgrover1	710:b2e1a2660ec2	900	* Once the scanning parameters have been configured, scanning can be
rgrover1	710:b2e1a2660ec2	901	* enabled by using startScan().
rgrover1	710:b2e1a2660ec2	902	*
rgrover1	710:b2e1a2660ec2	903	* @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1	710:b2e1a2660ec2	904	*/
rgrover1	710:b2e1a2660ec2	905	ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
rgrover1	710:b2e1a2660ec2	906	uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
rgrover1	710:b2e1a2660ec2	907	uint16_t timeout = 0,
rgrover1	710:b2e1a2660ec2	908	bool activeScanning = false) {
rgrover1	710:b2e1a2660ec2	909	ble_error_t rc;
rgrover1	710:b2e1a2660ec2	910	if (((rc = _scanningParams.setInterval(interval)) == BLE_ERROR_NONE) &&
rgrover1	710:b2e1a2660ec2	911	((rc = _scanningParams.setWindow(window)) == BLE_ERROR_NONE) &&
rgrover1	710:b2e1a2660ec2	912	((rc = _scanningParams.setTimeout(timeout)) == BLE_ERROR_NONE)) {
rgrover1	710:b2e1a2660ec2	913	_scanningParams.setActiveScanning(activeScanning);
rgrover1	710:b2e1a2660ec2	914	return BLE_ERROR_NONE;
rgrover1	710:b2e1a2660ec2	915	}
rgrover1	710:b2e1a2660ec2	916
rgrover1	710:b2e1a2660ec2	917	return rc;
rgrover1	710:b2e1a2660ec2	918	}
rgrover1	710:b2e1a2660ec2	919
rgrover1	710:b2e1a2660ec2	920	/**
vcoubard	1048:efb29faf12fc	921	* Set up the scanInterval parameter for GAP scanning (observer mode).
rgrover1	710:b2e1a2660ec2	922	* @param[in] interval
rgrover1	710:b2e1a2660ec2	923	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	710:b2e1a2660ec2	924	*
rgrover1	710:b2e1a2660ec2	925	* The scanning window divided by the interval determines the duty cycle for
rgrover1	710:b2e1a2660ec2	926	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	710:b2e1a2660ec2	927	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	710:b2e1a2660ec2	928	* to have the interval and window set to the same value. In this case,
rgrover1	710:b2e1a2660ec2	929	* scanning is continuous, with a change of scanning frequency once every
rgrover1	710:b2e1a2660ec2	930	* interval.
rgrover1	710:b2e1a2660ec2	931	*
rgrover1	710:b2e1a2660ec2	932	* Once the scanning parameters have been configured, scanning can be
rgrover1	710:b2e1a2660ec2	933	* enabled by using startScan().
rgrover1	710:b2e1a2660ec2	934	*/
rgrover1	710:b2e1a2660ec2	935	ble_error_t setScanInterval(uint16_t interval) {
rgrover1	710:b2e1a2660ec2	936	return _scanningParams.setInterval(interval);
rgrover1	710:b2e1a2660ec2	937	}
rgrover1	710:b2e1a2660ec2	938
rgrover1	710:b2e1a2660ec2	939	/**
vcoubard	1048:efb29faf12fc	940	* Set up the scanWindow parameter for GAP scanning (observer mode).
rgrover1	710:b2e1a2660ec2	941	* @param[in] window
rgrover1	710:b2e1a2660ec2	942	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	710:b2e1a2660ec2	943	*
rgrover1	710:b2e1a2660ec2	944	* The scanning window divided by the interval determines the duty cycle for
rgrover1	710:b2e1a2660ec2	945	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	710:b2e1a2660ec2	946	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	710:b2e1a2660ec2	947	* to have the interval and window set to the same value. In this case,
rgrover1	710:b2e1a2660ec2	948	* scanning is continuous, with a change of scanning frequency once every
rgrover1	710:b2e1a2660ec2	949	* interval.
rgrover1	710:b2e1a2660ec2	950	*
rgrover1	710:b2e1a2660ec2	951	* Once the scanning parameters have been configured, scanning can be
rgrover1	710:b2e1a2660ec2	952	* enabled by using startScan().
rgrover1	770:079b714e9c1a	953	*
rgrover1	770:079b714e9c1a	954	* If scanning is already active, the updated value of scanWindow will be
rgrover1	770:079b714e9c1a	955	* propagated to the underlying BLE stack.
rgrover1	710:b2e1a2660ec2	956	*/
rgrover1	710:b2e1a2660ec2	957	ble_error_t setScanWindow(uint16_t window) {
rgrover1	770:079b714e9c1a	958	ble_error_t rc;
rgrover1	770:079b714e9c1a	959	if ((rc = _scanningParams.setWindow(window)) != BLE_ERROR_NONE) {
rgrover1	770:079b714e9c1a	960	return rc;
rgrover1	770:079b714e9c1a	961	}
rgrover1	770:079b714e9c1a	962
rgrover1	770:079b714e9c1a	963	/* If scanning is already active, propagate the new setting to the stack. */
rgrover1	770:079b714e9c1a	964	if (scanningActive) {
rgrover1	770:079b714e9c1a	965	return startRadioScan(_scanningParams);
rgrover1	770:079b714e9c1a	966	}
rgrover1	770:079b714e9c1a	967
rgrover1	770:079b714e9c1a	968	return BLE_ERROR_NONE;
rgrover1	710:b2e1a2660ec2	969	}
rgrover1	710:b2e1a2660ec2	970
rgrover1	710:b2e1a2660ec2	971	/**
vcoubard	1048:efb29faf12fc	972	* Set up parameters for GAP scanning (observer mode).
rgrover1	710:b2e1a2660ec2	973	* @param[in] timeout
vcoubard	1048:efb29faf12fc	974	* Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
rgrover1	710:b2e1a2660ec2	975	*
rgrover1	710:b2e1a2660ec2	976	* Once the scanning parameters have been configured, scanning can be
rgrover1	710:b2e1a2660ec2	977	* enabled by using startScan().
rgrover1	770:079b714e9c1a	978	*
rgrover1	770:079b714e9c1a	979	* If scanning is already active, the updated value of scanTimeout will be
rgrover1	770:079b714e9c1a	980	* propagated to the underlying BLE stack.
rgrover1	710:b2e1a2660ec2	981	*/
rgrover1	710:b2e1a2660ec2	982	ble_error_t setScanTimeout(uint16_t timeout) {
rgrover1	770:079b714e9c1a	983	ble_error_t rc;
rgrover1	770:079b714e9c1a	984	if ((rc = _scanningParams.setTimeout(timeout)) != BLE_ERROR_NONE) {
rgrover1	770:079b714e9c1a	985	return rc;
rgrover1	770:079b714e9c1a	986	}
rgrover1	770:079b714e9c1a	987
rgrover1	770:079b714e9c1a	988	/* If scanning is already active, propagate the new settings to the stack. */
rgrover1	770:079b714e9c1a	989	if (scanningActive) {
rgrover1	770:079b714e9c1a	990	return startRadioScan(_scanningParams);
rgrover1	770:079b714e9c1a	991	}
rgrover1	770:079b714e9c1a	992
rgrover1	770:079b714e9c1a	993	return BLE_ERROR_NONE;
rgrover1	710:b2e1a2660ec2	994	}
rgrover1	710:b2e1a2660ec2	995
rgrover1	710:b2e1a2660ec2	996	/**
vcoubard	1048:efb29faf12fc	997	* Set up parameters for GAP scanning (observer mode).
rgrover1	710:b2e1a2660ec2	998	* @param[in] activeScanning
rgrover1	710:b2e1a2660ec2	999	* Set to True if active-scanning is required. This is used to fetch the
rgrover1	710:b2e1a2660ec2	1000	* scan response from a peer if possible.
rgrover1	710:b2e1a2660ec2	1001	*
rgrover1	710:b2e1a2660ec2	1002	* Once the scanning parameters have been configured, scanning can be
rgrover1	710:b2e1a2660ec2	1003	* enabled by using startScan().
rgrover1	770:079b714e9c1a	1004	*
rgrover1	770:079b714e9c1a	1005	* If scanning is already in progress, then active-scanning will be enabled
rgrover1	770:079b714e9c1a	1006	* for the underlying BLE stack.
rgrover1	710:b2e1a2660ec2	1007	*/
rgrover1	770:079b714e9c1a	1008	ble_error_t setActiveScanning(bool activeScanning) {
rgrover1	710:b2e1a2660ec2	1009	_scanningParams.setActiveScanning(activeScanning);
rgrover1	770:079b714e9c1a	1010
rgrover1	770:079b714e9c1a	1011	/* If scanning is already active, propagate the new settings to the stack. */
rgrover1	770:079b714e9c1a	1012	if (scanningActive) {
rgrover1	770:079b714e9c1a	1013	return startRadioScan(_scanningParams);
rgrover1	770:079b714e9c1a	1014	}
rgrover1	770:079b714e9c1a	1015
rgrover1	770:079b714e9c1a	1016	return BLE_ERROR_NONE;
rgrover1	710:b2e1a2660ec2	1017	}
rgrover1	710:b2e1a2660ec2	1018
rgrover1	710:b2e1a2660ec2	1019	/**
rgrover1	710:b2e1a2660ec2	1020	* Start scanning (Observer Procedure) based on the parameters currently in
rgrover1	710:b2e1a2660ec2	1021	* effect.
rgrover1	710:b2e1a2660ec2	1022	*
rgrover1	710:b2e1a2660ec2	1023	* @param[in] callback
vcoubard	1048:efb29faf12fc	1024	* The application-specific callback to be invoked upon
rgrover1	710:b2e1a2660ec2	1025	* receiving every advertisement report. This can be passed in
rgrover1	710:b2e1a2660ec2	1026	* as NULL, in which case scanning may not be enabled at all.
rgrover1	710:b2e1a2660ec2	1027	*/
rgrover1	710:b2e1a2660ec2	1028	ble_error_t startScan(void (callback)(const AdvertisementCallbackParams_t params)) {
rgrover1	710:b2e1a2660ec2	1029	ble_error_t err = BLE_ERROR_NONE;
rgrover1	710:b2e1a2660ec2	1030	if (callback) {
rgrover1	710:b2e1a2660ec2	1031	if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
rgrover1	770:079b714e9c1a	1032	scanningActive = true;
rgrover1	710:b2e1a2660ec2	1033	onAdvertisementReport.attach(callback);
rgrover1	710:b2e1a2660ec2	1034	}
rgrover1	710:b2e1a2660ec2	1035	}
rgrover1	710:b2e1a2660ec2	1036
rgrover1	710:b2e1a2660ec2	1037	return err;
rgrover1	710:b2e1a2660ec2	1038	}
rgrover1	710:b2e1a2660ec2	1039
rgrover1	710:b2e1a2660ec2	1040	/**
rgrover1	710:b2e1a2660ec2	1041	* Same as above, but this takes an (object, method) pair for a callback.
rgrover1	710:b2e1a2660ec2	1042	*/
rgrover1	710:b2e1a2660ec2	1043	template<typename T>
rgrover1	710:b2e1a2660ec2	1044	ble_error_t startScan(T object, void (T::callbackMember)(const AdvertisementCallbackParams_t *params)) {
rgrover1	710:b2e1a2660ec2	1045	ble_error_t err = BLE_ERROR_NONE;
rgrover1	710:b2e1a2660ec2	1046	if (object && callbackMember) {
rgrover1	710:b2e1a2660ec2	1047	if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
rgrover1	770:079b714e9c1a	1048	scanningActive = true;
rgrover1	710:b2e1a2660ec2	1049	onAdvertisementReport.attach(object, callbackMember);
rgrover1	710:b2e1a2660ec2	1050	}
rgrover1	710:b2e1a2660ec2	1051	}
rgrover1	710:b2e1a2660ec2	1052
rgrover1	710:b2e1a2660ec2	1053	return err;
rgrover1	710:b2e1a2660ec2	1054	}
rgrover1	710:b2e1a2660ec2	1055
rgrover1	753:0f60274cd3ad	1056	/**
rgrover1	753:0f60274cd3ad	1057	* Initialize radio-notification events to be generated from the stack.
vcoubard	1048:efb29faf12fc	1058	* This API doesn't need to be called directly.
rgrover1	753:0f60274cd3ad	1059	*
rgrover1	753:0f60274cd3ad	1060	* Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1	753:0f60274cd3ad	1061	* (nACTIVE) signals from the stack that notify the application when the
rgrover1	753:0f60274cd3ad	1062	* radio is in use.
rgrover1	753:0f60274cd3ad	1063	*
vcoubard	1048:efb29faf12fc	1064	* The ACTIVE signal is sent before the radio event starts. The nACTIVE
vcoubard	1048:efb29faf12fc	1065	* signal is sent at the end of the radio event. These signals can be used
rgrover1	753:0f60274cd3ad	1066	* by the application programmer to synchronize application logic with radio
rgrover1	753:0f60274cd3ad	1067	* activity. For example, the ACTIVE signal can be used to shut off external
vcoubard	1048:efb29faf12fc	1068	* devices, to manage peak current drawn during periods when the radio is on,
rgrover1	753:0f60274cd3ad	1069	* or to trigger sensor data collection for transmission in the Radio Event.
rgrover1	753:0f60274cd3ad	1070	*
rgrover1	753:0f60274cd3ad	1071	* @return BLE_ERROR_NONE on successful initialization, otherwise an error code.
rgrover1	753:0f60274cd3ad	1072	*/
rgrover1	753:0f60274cd3ad	1073	virtual ble_error_t initRadioNotification(void) {
rgrover1	753:0f60274cd3ad	1074	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1	753:0f60274cd3ad	1075	}
rgrover1	753:0f60274cd3ad	1076
rgrover1	710:b2e1a2660ec2	1077	private:
rgrover1	710:b2e1a2660ec2	1078	ble_error_t setAdvertisingData(void) {
rgrover1	710:b2e1a2660ec2	1079	return setAdvertisingData(_advPayload, _scanResponse);
rgrover1	710:b2e1a2660ec2	1080	}
rgrover1	710:b2e1a2660ec2	1081
rgrover1	710:b2e1a2660ec2	1082	private:
rgrover1	896:791741895cd8	1083	virtual ble_error_t setAdvertisingData(const GapAdvertisingData &advData, const GapAdvertisingData &scanResponse) = 0;
rgrover1	896:791741895cd8	1084	virtual ble_error_t startAdvertising(const GapAdvertisingParams &) = 0;
rgrover1	710:b2e1a2660ec2	1085
rgrover1	710:b2e1a2660ec2	1086	public:
rgrover1	710:b2e1a2660ec2	1087	/**
rgrover1	710:b2e1a2660ec2	1088	* Accessors to read back currently active advertising params.
rgrover1	710:b2e1a2660ec2	1089	*/
rgrover1	710:b2e1a2660ec2	1090	GapAdvertisingParams &getAdvertisingParams(void) {
rgrover1	710:b2e1a2660ec2	1091	return _advParams;
rgrover1	710:b2e1a2660ec2	1092	}
rgrover1	710:b2e1a2660ec2	1093	const GapAdvertisingParams &getAdvertisingParams(void) const {
rgrover1	710:b2e1a2660ec2	1094	return _advParams;
rgrover1	710:b2e1a2660ec2	1095	}
rgrover1	710:b2e1a2660ec2	1096
rgrover1	710:b2e1a2660ec2	1097	/**
vcoubard	1048:efb29faf12fc	1098	* Set up a particular, user-constructed set of advertisement parameters for
rgrover1	710:b2e1a2660ec2	1099	* the underlying stack. It would be uncommon for this API to be used
rgrover1	710:b2e1a2660ec2	1100	* directly; there are other APIs to tweak advertisement parameters
rgrover1	710:b2e1a2660ec2	1101	* individually.
rgrover1	710:b2e1a2660ec2	1102	*/
rgrover1	710:b2e1a2660ec2	1103	void setAdvertisingParams(const GapAdvertisingParams &newParams) {
rgrover1	710:b2e1a2660ec2	1104	_advParams = newParams;
rgrover1	710:b2e1a2660ec2	1105	}
rgrover1	710:b2e1a2660ec2	1106
rgrover1	710:b2e1a2660ec2	1107	/* Event callback handlers. */
rgrover1	710:b2e1a2660ec2	1108	public:
rgrover1	710:b2e1a2660ec2	1109	/**
vcoubard	1048:efb29faf12fc	1110	* Set up a callback for timeout events. Refer to TimeoutSource_t for
rgrover1	710:b2e1a2660ec2	1111	* possible event types.
vcoubard	1052:b55e1ad3e1b3	1112	* @note It is possible to unregister callbacks using onTimeout().detach(callback)
rgrover1	710:b2e1a2660ec2	1113	*/
vcoubard	1052:b55e1ad3e1b3	1114	void onTimeout(TimeoutEventCallback_t callback) {
vcoubard	1052:b55e1ad3e1b3	1115	timeoutCallbackChain.add(callback);
vcoubard	1052:b55e1ad3e1b3	1116	}
vcoubard	1052:b55e1ad3e1b3	1117
vcoubard	1052:b55e1ad3e1b3	1118	/**
vcoubard	1052:b55e1ad3e1b3	1119	* @brief provide access to the callchain of timeout event callbacks
vcoubard	1052:b55e1ad3e1b3	1120	* It is possible to register callbacks using onTimeout().add(callback);
vcoubard	1054:f59e5d9a992a	1121	* It is possible to unregister callbacks using onTimeout().detach(callback)
vcoubard	1052:b55e1ad3e1b3	1122	* @return The timeout event callbacks chain
vcoubard	1052:b55e1ad3e1b3	1123	*/
vcoubard	1052:b55e1ad3e1b3	1124	TimeoutEventCallbackChain_t& onTimeout() {
vcoubard	1052:b55e1ad3e1b3	1125	return timeoutCallbackChain;
vcoubard	1052:b55e1ad3e1b3	1126	}
rgrover1	710:b2e1a2660ec2	1127
rgrover1	710:b2e1a2660ec2	1128	/**
rgrover1	829:9072de50087b	1129	* Append to a chain of callbacks to be invoked upon GAP connection.
vcoubard	1052:b55e1ad3e1b3	1130	* @note It is possible to unregister callbacks using onConnection().detach(callback)
rgrover1	710:b2e1a2660ec2	1131	*/
rgrover1	829:9072de50087b	1132	void onConnection(ConnectionEventCallback_t callback) {connectionCallChain.add(callback);}
rgrover1	710:b2e1a2660ec2	1133
rgrover1	829:9072de50087b	1134	template<typename T>
rgrover1	829:9072de50087b	1135	void onConnection(T tptr, void (T::mptr)(const ConnectionCallbackParams_t*)) {connectionCallChain.add(tptr, mptr);}
rgrover1	710:b2e1a2660ec2	1136
rgrover1	710:b2e1a2660ec2	1137	/**
vcoubard	1052:b55e1ad3e1b3	1138	* @brief provide access to the callchain of connection event callbacks
vcoubard	1052:b55e1ad3e1b3	1139	* It is possible to register callbacks using onConnection().add(callback);
vcoubard	1054:f59e5d9a992a	1140	* It is possible to unregister callbacks using onConnection().detach(callback)
vcoubard	1052:b55e1ad3e1b3	1141	* @return The connection event callbacks chain
vcoubard	1052:b55e1ad3e1b3	1142	*/
vcoubard	1054:f59e5d9a992a	1143	ConnectionEventCallbackChain_t& onConnection() {
vcoubard	1052:b55e1ad3e1b3	1144	return connectionCallChain;
vcoubard	1052:b55e1ad3e1b3	1145	}
vcoubard	1052:b55e1ad3e1b3	1146
vcoubard	1052:b55e1ad3e1b3	1147	/**
rgrover1	829:9072de50087b	1148	* Append to a chain of callbacks to be invoked upon GAP disconnection.
vcoubard	1052:b55e1ad3e1b3	1149	* @note It is possible to unregister callbacks using onDisconnection().detach(callback)
rgrover1	816:2b4f0ef8c06e	1150	*/
rgrover1	829:9072de50087b	1151	void onDisconnection(DisconnectionEventCallback_t callback) {disconnectionCallChain.add(callback);}
rgrover1	816:2b4f0ef8c06e	1152
rgrover1	710:b2e1a2660ec2	1153	template<typename T>
rgrover1	829:9072de50087b	1154	void onDisconnection(T tptr, void (T::mptr)(const DisconnectionCallbackParams_t*)) {disconnectionCallChain.add(tptr, mptr);}
rgrover1	710:b2e1a2660ec2	1155
rgrover1	710:b2e1a2660ec2	1156	/**
vcoubard	1052:b55e1ad3e1b3	1157	* @brief provide access to the callchain of disconnection event callbacks
vcoubard	1052:b55e1ad3e1b3	1158	* It is possible to register callbacks using onDisconnection().add(callback);
vcoubard	1054:f59e5d9a992a	1159	* It is possible to unregister callbacks using onDisconnection().detach(callback)
vcoubard	1052:b55e1ad3e1b3	1160	* @return The disconnection event callbacks chain
vcoubard	1052:b55e1ad3e1b3	1161	*/
vcoubard	1052:b55e1ad3e1b3	1162	DisconnectionEventCallbackChain_t& onDisconnection() {
vcoubard	1052:b55e1ad3e1b3	1163	return disconnectionCallChain;
vcoubard	1052:b55e1ad3e1b3	1164	}
vcoubard	1052:b55e1ad3e1b3	1165
vcoubard	1052:b55e1ad3e1b3	1166	/**
rgrover1	710:b2e1a2660ec2	1167	* Set the application callback for radio-notification events.
rgrover1	710:b2e1a2660ec2	1168	*
rgrover1	710:b2e1a2660ec2	1169	* Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1	710:b2e1a2660ec2	1170	* (nACTIVE) signals from the stack that notify the application when the
rgrover1	753:0f60274cd3ad	1171	* radio is in use.
rgrover1	710:b2e1a2660ec2	1172	*
vcoubard	1048:efb29faf12fc	1173	* The ACTIVE signal is sent before the radio event starts. The nACTIVE
vcoubard	1048:efb29faf12fc	1174	* signal is sent at the end of the radio event. These signals can be used
rgrover1	710:b2e1a2660ec2	1175	* by the application programmer to synchronize application logic with radio
rgrover1	710:b2e1a2660ec2	1176	* activity. For example, the ACTIVE signal can be used to shut off external
vcoubard	1048:efb29faf12fc	1177	* devices, to manage peak current drawn during periods when the radio is on,
rgrover1	710:b2e1a2660ec2	1178	* or to trigger sensor data collection for transmission in the Radio Event.
rgrover1	710:b2e1a2660ec2	1179	*
rgrover1	710:b2e1a2660ec2	1180	* @param callback
rgrover1	710:b2e1a2660ec2	1181	* The application handler to be invoked in response to a radio
rgrover1	710:b2e1a2660ec2	1182	* ACTIVE/INACTIVE event.
rgrover1	754:9b391fb5c5d7	1183	*
vcoubard	1048:efb29faf12fc	1184	* Or in the other version:
rgrover1	754:9b391fb5c5d7	1185	*
rgrover1	754:9b391fb5c5d7	1186	* @param tptr
rgrover1	754:9b391fb5c5d7	1187	* Pointer to the object of a class defining the member callback
rgrover1	754:9b391fb5c5d7	1188	* function (mptr).
rgrover1	754:9b391fb5c5d7	1189	* @param mptr
rgrover1	754:9b391fb5c5d7	1190	* The member callback (within the context of an object) to be
rgrover1	754:9b391fb5c5d7	1191	* invoked in response to a radio ACTIVE/INACTIVE event.
rgrover1	710:b2e1a2660ec2	1192	*/
rgrover1	753:0f60274cd3ad	1193	void onRadioNotification(void (*callback)(bool param)) {
rgrover1	753:0f60274cd3ad	1194	radioNotificationCallback.attach(callback);
rgrover1	753:0f60274cd3ad	1195	}
rgrover1	753:0f60274cd3ad	1196	template <typename T>
rgrover1	753:0f60274cd3ad	1197	void onRadioNotification(T tptr, void (T::mptr)(bool)) {
rgrover1	753:0f60274cd3ad	1198	radioNotificationCallback.attach(tptr, mptr);
rgrover1	753:0f60274cd3ad	1199	}
rgrover1	710:b2e1a2660ec2	1200
vcoubard	1090:148d8b9b56a5	1201	/**
vcoubard	1090:148d8b9b56a5	1202	* Setup a callback to be invoked to notify the user application that the
vcoubard	1090:148d8b9b56a5	1203	* Gap instance is about to shutdown (possibly as a result of a call
vcoubard	1090:148d8b9b56a5	1204	* to BLE::shutdown()).
vcoubard	1090:148d8b9b56a5	1205	*
vcoubard	1090:148d8b9b56a5	1206	* @Note: It is possible to chain together multiple onShutdown callbacks
vcoubard	1090:148d8b9b56a5	1207	* (potentially from different modules of an application) to be notified
vcoubard	1090:148d8b9b56a5	1208	* before the Gap instance is shutdown.
vcoubard	1090:148d8b9b56a5	1209	*
vcoubard	1090:148d8b9b56a5	1210	* @Note: It is also possible to set up a callback into a member function of
vcoubard	1090:148d8b9b56a5	1211	* some object.
vcoubard	1090:148d8b9b56a5	1212	*
vcoubard	1090:148d8b9b56a5	1213	* @Note It is possible to unregister a callback using onShutdown().detach(callback)
vcoubard	1090:148d8b9b56a5	1214	*/
vcoubard	1090:148d8b9b56a5	1215	void onShutdown(const GapShutdownCallback_t& callback) {
vcoubard	1090:148d8b9b56a5	1216	shutdownCallChain.add(callback);
vcoubard	1090:148d8b9b56a5	1217	}
vcoubard	1090:148d8b9b56a5	1218	template <typename T>
vcoubard	1090:148d8b9b56a5	1219	void onShutdown(T objPtr, void (T::memberPtr)(void)) {
vcoubard	1090:148d8b9b56a5	1220	shutdownCallChain.add(objPtr, memberPtr);
vcoubard	1090:148d8b9b56a5	1221	}
vcoubard	1090:148d8b9b56a5	1222
vcoubard	1090:148d8b9b56a5	1223	/**
vcoubard	1090:148d8b9b56a5	1224	* @brief provide access to the callchain of shutdown event callbacks
vcoubard	1090:148d8b9b56a5	1225	* It is possible to register callbacks using onShutdown().add(callback);
vcoubard	1090:148d8b9b56a5	1226	* It is possible to unregister callbacks using onShutdown().detach(callback)
vcoubard	1090:148d8b9b56a5	1227	* @return The shutdown event callbacks chain
vcoubard	1090:148d8b9b56a5	1228	*/
vcoubard	1090:148d8b9b56a5	1229	GapShutdownCallbackChain_t& onShutdown() {
vcoubard	1090:148d8b9b56a5	1230	return shutdownCallChain;
vcoubard	1090:148d8b9b56a5	1231	}
vcoubard	1090:148d8b9b56a5	1232
vcoubard	1082:127667021827	1233	public:
vcoubard	1082:127667021827	1234	/**
vcoubard	1090:148d8b9b56a5	1235	* Notify all registered onShutdown callbacks that the Gap instance is
vcoubard	1090:148d8b9b56a5	1236	* about to be shutdown and clear all Gap state of the
vcoubard	1090:148d8b9b56a5	1237	* associated object.
vcoubard	1082:127667021827	1238	*
vcoubard	1082:127667021827	1239	* This function is meant to be overridden in the platform-specific
vcoubard	1082:127667021827	1240	* sub-class. Nevertheless, the sub-class is only expected to reset its
vcoubard	1082:127667021827	1241	* state and not the data held in Gap members. This shall be achieved by a
vcoubard	1082:127667021827	1242	* call to Gap::reset() from the sub-class' reset() implementation.
vcoubard	1082:127667021827	1243	*
vcoubard	1082:127667021827	1244	* @return BLE_ERROR_NONE on success.
vcoubard	1082:127667021827	1245	*
vcoubard	1082:127667021827	1246	* @note: Currently a call to reset() does not reset the advertising and
vcoubard	1082:127667021827	1247	* scan parameters to default values.
vcoubard	1082:127667021827	1248	*/
vcoubard	1082:127667021827	1249	virtual ble_error_t reset(void) {
vcoubard	1090:148d8b9b56a5	1250	/* Notify that the instance is about to shutdown */
vcoubard	1090:148d8b9b56a5	1251	shutdownCallChain.call(this);
vcoubard	1090:148d8b9b56a5	1252	shutdownCallChain.clear();
vcoubard	1090:148d8b9b56a5	1253
vcoubard	1082:127667021827	1254	/* Clear Gap state */
vcoubard	1082:127667021827	1255	state.advertising = 0;
vcoubard	1084:40c1e518d6de	1256	state.connected = 0;
vcoubard	1082:127667021827	1257
vcoubard	1082:127667021827	1258	/* Clear scanning state */
vcoubard	1082:127667021827	1259	scanningActive = false;
vcoubard	1082:127667021827	1260
vcoubard	1082:127667021827	1261	/* Clear advertising and scanning data */
vcoubard	1082:127667021827	1262	_advPayload.clear();
vcoubard	1082:127667021827	1263	_scanResponse.clear();
vcoubard	1082:127667021827	1264
vcoubard	1082:127667021827	1265	/* Clear callbacks */
vcoubard	1082:127667021827	1266	timeoutCallbackChain.clear();
vcoubard	1082:127667021827	1267	connectionCallChain.clear();
vcoubard	1082:127667021827	1268	disconnectionCallChain.clear();
vcoubard	1082:127667021827	1269	radioNotificationCallback = NULL;
vcoubard	1084:40c1e518d6de	1270	onAdvertisementReport = NULL;
vcoubard	1082:127667021827	1271
vcoubard	1082:127667021827	1272	return BLE_ERROR_NONE;
vcoubard	1082:127667021827	1273	}
vcoubard	1082:127667021827	1274
rgrover1	710:b2e1a2660ec2	1275	protected:
rgrover1	710:b2e1a2660ec2	1276	Gap() :
rgrover1	710:b2e1a2660ec2	1277	_advParams(),
rgrover1	710:b2e1a2660ec2	1278	_advPayload(),
rgrover1	710:b2e1a2660ec2	1279	_scanningParams(),
rgrover1	710:b2e1a2660ec2	1280	_scanResponse(),
rgrover1	710:b2e1a2660ec2	1281	state(),
rgrover1	770:079b714e9c1a	1282	scanningActive(false),
vcoubard	1052:b55e1ad3e1b3	1283	timeoutCallbackChain(),
rgrover1	710:b2e1a2660ec2	1284	radioNotificationCallback(),
rgrover1	710:b2e1a2660ec2	1285	onAdvertisementReport(),
rgrover1	816:2b4f0ef8c06e	1286	connectionCallChain(),
rgrover1	710:b2e1a2660ec2	1287	disconnectionCallChain() {
rgrover1	710:b2e1a2660ec2	1288	_advPayload.clear();
rgrover1	710:b2e1a2660ec2	1289	_scanResponse.clear();
rgrover1	710:b2e1a2660ec2	1290	}
rgrover1	710:b2e1a2660ec2	1291
rgrover1	710:b2e1a2660ec2	1292	/* Entry points for the underlying stack to report events back to the user. */
rgrover1	710:b2e1a2660ec2	1293	public:
vcoubard	1119:7a487d506451	1294	void processConnectionEvent(Handle_t handle,
vcoubard	1119:7a487d506451	1295	Role_t role,
vcoubard	1119:7a487d506451	1296	BLEProtocol::AddressType_t peerAddrType,
vcoubard	1115:82d4a8a56d91	1297	const BLEProtocol::AddressBytes_t peerAddr,
vcoubard	1119:7a487d506451	1298	BLEProtocol::AddressType_t ownAddrType,
vcoubard	1115:82d4a8a56d91	1299	const BLEProtocol::AddressBytes_t ownAddr,
vcoubard	1119:7a487d506451	1300	const ConnectionParams_t *connectionParams) {
rgrover1	710:b2e1a2660ec2	1301	state.connected = 1;
rgrover1	829:9072de50087b	1302	ConnectionCallbackParams_t callbackParams(handle, role, peerAddrType, peerAddr, ownAddrType, ownAddr, connectionParams);
rgrover1	829:9072de50087b	1303	connectionCallChain.call(&callbackParams);
rgrover1	710:b2e1a2660ec2	1304	}
rgrover1	710:b2e1a2660ec2	1305
rgrover1	710:b2e1a2660ec2	1306	void processDisconnectionEvent(Handle_t handle, DisconnectionReason_t reason) {
rgrover1	710:b2e1a2660ec2	1307	state.connected = 0;
rgrover1	829:9072de50087b	1308	DisconnectionCallbackParams_t callbackParams(handle, reason);
rgrover1	829:9072de50087b	1309	disconnectionCallChain.call(&callbackParams);
rgrover1	710:b2e1a2660ec2	1310	}
rgrover1	710:b2e1a2660ec2	1311
vcoubard	1119:7a487d506451	1312	void processAdvertisementReport(const BLEProtocol::AddressBytes_t peerAddr,
vcoubard	1079:6e2d9514f3df	1313	int8_t rssi,
vcoubard	1079:6e2d9514f3df	1314	bool isScanResponse,
rgrover1	710:b2e1a2660ec2	1315	GapAdvertisingParams::AdvertisingType_t type,
vcoubard	1079:6e2d9514f3df	1316	uint8_t advertisingDataLen,
vcoubard	1079:6e2d9514f3df	1317	const uint8_t *advertisingData) {
rgrover1	710:b2e1a2660ec2	1318	AdvertisementCallbackParams_t params;
rgrover1	710:b2e1a2660ec2	1319	memcpy(params.peerAddr, peerAddr, ADDR_LEN);
rgrover1	710:b2e1a2660ec2	1320	params.rssi = rssi;
rgrover1	710:b2e1a2660ec2	1321	params.isScanResponse = isScanResponse;
rgrover1	710:b2e1a2660ec2	1322	params.type = type;
rgrover1	710:b2e1a2660ec2	1323	params.advertisingDataLen = advertisingDataLen;
rgrover1	710:b2e1a2660ec2	1324	params.advertisingData = advertisingData;
rgrover1	710:b2e1a2660ec2	1325	onAdvertisementReport.call(&params);
rgrover1	710:b2e1a2660ec2	1326	}
rgrover1	710:b2e1a2660ec2	1327
rgrover1	710:b2e1a2660ec2	1328	void processTimeoutEvent(TimeoutSource_t source) {
vcoubard	1052:b55e1ad3e1b3	1329	if (timeoutCallbackChain) {
vcoubard	1052:b55e1ad3e1b3	1330	timeoutCallbackChain(source);
rgrover1	710:b2e1a2660ec2	1331	}
rgrover1	710:b2e1a2660ec2	1332	}
rgrover1	710:b2e1a2660ec2	1333
rgrover1	710:b2e1a2660ec2	1334	protected:
rgrover1	710:b2e1a2660ec2	1335	GapAdvertisingParams _advParams;
rgrover1	710:b2e1a2660ec2	1336	GapAdvertisingData _advPayload;
rgrover1	710:b2e1a2660ec2	1337	GapScanningParams _scanningParams;
rgrover1	710:b2e1a2660ec2	1338	GapAdvertisingData _scanResponse;
rgrover1	710:b2e1a2660ec2	1339
rgrover1	710:b2e1a2660ec2	1340	GapState_t state;
rgrover1	770:079b714e9c1a	1341	bool scanningActive;
rgrover1	710:b2e1a2660ec2	1342
rgrover1	710:b2e1a2660ec2	1343	protected:
vcoubard	1052:b55e1ad3e1b3	1344	TimeoutEventCallbackChain_t timeoutCallbackChain;
vcoubard	1052:b55e1ad3e1b3	1345	RadioNotificationEventCallback_t radioNotificationCallback;
vcoubard	1052:b55e1ad3e1b3	1346	AdvertisementReportCallback_t onAdvertisementReport;
vcoubard	1052:b55e1ad3e1b3	1347	ConnectionEventCallbackChain_t connectionCallChain;
vcoubard	1052:b55e1ad3e1b3	1348	DisconnectionEventCallbackChain_t disconnectionCallChain;
rgrover1	710:b2e1a2660ec2	1349
rgrover1	710:b2e1a2660ec2	1350	private:
vcoubard	1090:148d8b9b56a5	1351	GapShutdownCallbackChain_t shutdownCallChain;
vcoubard	1090:148d8b9b56a5	1352
vcoubard	1090:148d8b9b56a5	1353	private:
vcoubard	1048:efb29faf12fc	1354	/* Disallow copy and assignment. */
rgrover1	710:b2e1a2660ec2	1355	Gap(const Gap &);
rgrover1	710:b2e1a2660ec2	1356	Gap& operator=(const Gap &);
rgrover1	710:b2e1a2660ec2	1357	};
rgrover1	710:b2e1a2660ec2	1358
rgrover1	710:b2e1a2660ec2	1359	#endif // ifndef __GAP_H__

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	11 May 2016
Imports:	8
Forks:	0
Commits:	1202
Dependents:	1
Dependencies:	1
Followers:	1

ble/Gap.h@1119:7a487d506451, 2016-01-11 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning