Wang Xinglu
High level Bluetooth Low Energy API and radio abstraction layer
Fork of
BLE_API
by 
Bluetooth Low Energy
public/BLEDevice.h@441:2d864886aeca, 2015-06-19 (annotated)
- Committer:
- rgrover1
- Date:
- Fri Jun 19 15:51:56 2015 +0100
- Revision:
- 441:2d864886aeca
- Parent:
- 434:bd1f1cc10277
- Child:
- 442:c120ffca22fa
Synchronized with git rev b899ac13
Author: Rohit Grover
introduce API for BLEDevice::connect(peerAddr, peerAddrType)
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| rgrover1 | 257:7a50601356cc | 1 | /* mbed Microcontroller Library |
| rgrover1 | 257:7a50601356cc | 2 | * Copyright (c) 2006-2013 ARM Limited |
| rgrover1 | 257:7a50601356cc | 3 | * |
| rgrover1 | 257:7a50601356cc | 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
| rgrover1 | 257:7a50601356cc | 5 | * you may not use this file except in compliance with the License. |
| rgrover1 | 257:7a50601356cc | 6 | * You may obtain a copy of the License at |
| rgrover1 | 257:7a50601356cc | 7 | * |
| rgrover1 | 257:7a50601356cc | 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
| rgrover1 | 257:7a50601356cc | 9 | * |
| rgrover1 | 257:7a50601356cc | 10 | * Unless required by applicable law or agreed to in writing, software |
| rgrover1 | 257:7a50601356cc | 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
| rgrover1 | 257:7a50601356cc | 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| rgrover1 | 257:7a50601356cc | 13 | * See the License for the specific language governing permissions and |
| rgrover1 | 257:7a50601356cc | 14 | * limitations under the License. |
| rgrover1 | 257:7a50601356cc | 15 | */ |
| rgrover1 | 257:7a50601356cc | 16 | |
| rgrover1 | 257:7a50601356cc | 17 | #ifndef __BLE_DEVICE__ |
| rgrover1 | 257:7a50601356cc | 18 | #define __BLE_DEVICE__ |
| rgrover1 | 257:7a50601356cc | 19 | |
| rgrover1 | 257:7a50601356cc | 20 | #include "blecommon.h" |
| rgrover1 | 257:7a50601356cc | 21 | #include "Gap.h" |
| rgrover1 | 257:7a50601356cc | 22 | #include "GattServer.h" |
| rgrover1 | 434:bd1f1cc10277 | 23 | #include "BLEDeviceInstanceBase.h" |
| rgrover1 | 434:bd1f1cc10277 | 24 | |
| rgrover1 | 434:bd1f1cc10277 | 25 | #include "GapAdvertisingData.h" |
| rgrover1 | 434:bd1f1cc10277 | 26 | #include "GapAdvertisingParams.h" |
| rgrover1 | 380:2109a08c311c | 27 | #include "GapScanningParams.h" |
| rgrover1 | 434:bd1f1cc10277 | 28 | |
| rgrover1 | 257:7a50601356cc | 29 | |
| rgrover1 | 257:7a50601356cc | 30 | /** |
| rgrover1 | 257:7a50601356cc | 31 | * The base class used to abstract away BLE capable radio transceivers or SOCs, |
| rgrover1 | 257:7a50601356cc | 32 | * to enable this BLE API to work with any radio transparently. |
| rgrover1 | 257:7a50601356cc | 33 | */ |
| rgrover1 | 257:7a50601356cc | 34 | class BLEDevice |
| rgrover1 | 257:7a50601356cc | 35 | { |
| rgrover1 | 257:7a50601356cc | 36 | public: |
| rgrover1 | 257:7a50601356cc | 37 | /** |
| rgrover1 | 257:7a50601356cc | 38 | * Initialize the BLE controller. This should be called before using |
| rgrover1 | 257:7a50601356cc | 39 | * anything else in the BLE_API. |
| rgrover1 | 411:cf2cce37ad73 | 40 | * |
| rgrover1 | 411:cf2cce37ad73 | 41 | * init() hands control to the underlying BLE module to accomplish |
| rgrover1 | 411:cf2cce37ad73 | 42 | * initialization. This initialization may tacitly depend on other hardware |
| rgrover1 | 411:cf2cce37ad73 | 43 | * setup (such as clocks or power-modes) which happens early on during |
| rgrover1 | 411:cf2cce37ad73 | 44 | * system startup. It may not be safe to call init() from global static |
| rgrover1 | 411:cf2cce37ad73 | 45 | * context where ordering is compiler specific and can't be guaranteed--it |
| rgrover1 | 411:cf2cce37ad73 | 46 | * is safe to call BLEDevice::init() from within main(). |
| rgrover1 | 257:7a50601356cc | 47 | */ |
| rgrover1 | 257:7a50601356cc | 48 | ble_error_t init(); |
| rgrover1 | 411:cf2cce37ad73 | 49 | |
| rgrover1 | 257:7a50601356cc | 50 | ble_error_t reset(void); |
| rgrover1 | 257:7a50601356cc | 51 | |
| rgrover1 | 257:7a50601356cc | 52 | /** |
| rgrover1 | 257:7a50601356cc | 53 | * Purge the BLE stack of GATT and GAP state. init() must be called afterwards to re-instate services and GAP state. |
| rgrover1 | 257:7a50601356cc | 54 | */ |
| rgrover1 | 257:7a50601356cc | 55 | ble_error_t shutdown(void); |
| rgrover1 | 257:7a50601356cc | 56 | |
| rgrover1 | 257:7a50601356cc | 57 | /* GAP specific APIs */ |
| rgrover1 | 257:7a50601356cc | 58 | public: |
| rgrover1 | 257:7a50601356cc | 59 | /** |
| rgrover1 | 257:7a50601356cc | 60 | * Set the BTLE MAC address and type. |
| rgrover1 | 257:7a50601356cc | 61 | * @return BLE_ERROR_NONE on success. |
| rgrover1 | 257:7a50601356cc | 62 | */ |
| rgrover1 | 424:370d5f1f292f | 63 | ble_error_t setAddress(Gap::AddressType_t type, const Gap::address_t address); |
| rgrover1 | 257:7a50601356cc | 64 | |
| rgrover1 | 257:7a50601356cc | 65 | /** |
| rgrover1 | 257:7a50601356cc | 66 | * Fetch the BTLE MAC address and type. |
| rgrover1 | 257:7a50601356cc | 67 | * @return BLE_ERROR_NONE on success. |
| rgrover1 | 257:7a50601356cc | 68 | */ |
| rgrover1 | 424:370d5f1f292f | 69 | ble_error_t getAddress(Gap::AddressType_t *typeP, Gap::address_t address); |
| rgrover1 | 257:7a50601356cc | 70 | |
| rgrover1 | 257:7a50601356cc | 71 | /** |
| rgrover1 | 257:7a50601356cc | 72 | * @param[in] advType |
| rgrover1 | 257:7a50601356cc | 73 | * The GAP advertising mode to use for this device. Valid |
| rgrover1 | 257:7a50601356cc | 74 | * values are defined in AdvertisingType: |
| rgrover1 | 257:7a50601356cc | 75 | * |
| rgrover1 | 257:7a50601356cc | 76 | * \par ADV_NON_CONNECTABLE_UNDIRECTED |
| rgrover1 | 257:7a50601356cc | 77 | * All connections to the peripheral device will be refused. |
| rgrover1 | 257:7a50601356cc | 78 | * |
| rgrover1 | 257:7a50601356cc | 79 | * \par ADV_CONNECTABLE_DIRECTED |
| rgrover1 | 257:7a50601356cc | 80 | * Only connections from a pre-defined central device will be |
| rgrover1 | 257:7a50601356cc | 81 | * accepted. |
| rgrover1 | 257:7a50601356cc | 82 | * |
| rgrover1 | 257:7a50601356cc | 83 | * \par ADV_CONNECTABLE_UNDIRECTED |
| rgrover1 | 257:7a50601356cc | 84 | * Any central device can connect to this peripheral. |
| rgrover1 | 257:7a50601356cc | 85 | * |
| rgrover1 | 257:7a50601356cc | 86 | * \par ADV_SCANNABLE_UNDIRECTED |
| rgrover1 | 300:d9a39f759a6a | 87 | * Include support for Scan Response payloads. |
| rgrover1 | 257:7a50601356cc | 88 | * |
| rgrover1 | 257:7a50601356cc | 89 | * \par |
| rgrover1 | 257:7a50601356cc | 90 | * See Bluetooth Core Specification 4.0 (Vol. 3), Part C, |
| rgrover1 | 257:7a50601356cc | 91 | * Section 9.3 and Core Specification 4.0 (Vol. 6), Part B, |
| rgrover1 | 257:7a50601356cc | 92 | * Section 2.3.1 for further information on GAP connection |
| rgrover1 | 257:7a50601356cc | 93 | * modes |
| rgrover1 | 257:7a50601356cc | 94 | */ |
| rgrover1 | 257:7a50601356cc | 95 | void setAdvertisingType(GapAdvertisingParams::AdvertisingType); |
| rgrover1 | 257:7a50601356cc | 96 | |
| rgrover1 | 257:7a50601356cc | 97 | /** |
| rgrover1 | 257:7a50601356cc | 98 | * @param[in] interval |
| rgrover1 | 325:501ad8b8bbe5 | 99 | * Advertising interval in units of milliseconds. Advertising |
| rgrover1 | 325:501ad8b8bbe5 | 100 | * is disabled if interval is 0. If interval is smaller than |
| rgrover1 | 325:501ad8b8bbe5 | 101 | * the minimum supported value, then the minimum supported |
| rgrover1 | 325:501ad8b8bbe5 | 102 | * value is used instead. |
| rgrover1 | 257:7a50601356cc | 103 | * |
| rgrover1 | 257:7a50601356cc | 104 | * \par |
| rgrover1 | 257:7a50601356cc | 105 | * Decreasing this value will allow central devices to detect |
| rgrover1 | 257:7a50601356cc | 106 | * your peripheral faster at the expense of more power being |
| rgrover1 | 257:7a50601356cc | 107 | * used by the radio due to the higher data transmit rate. |
| rgrover1 | 257:7a50601356cc | 108 | * |
| rgrover1 | 257:7a50601356cc | 109 | * \par |
| rgrover1 | 257:7a50601356cc | 110 | * This field must be set to 0 if connectionMode is equal |
| rgrover1 | 257:7a50601356cc | 111 | * to ADV_CONNECTABLE_DIRECTED |
| rgrover1 | 257:7a50601356cc | 112 | * |
| rgrover1 | 257:7a50601356cc | 113 | * \par |
| rgrover1 | 257:7a50601356cc | 114 | * See Bluetooth Core Specification, Vol 3., Part C, |
| rgrover1 | 257:7a50601356cc | 115 | * Appendix A for suggested advertising intervals. |
| rgrover1 | 334:6bc1223306b9 | 116 | * |
| rgrover1 | 334:6bc1223306b9 | 117 | * @Note: [WARNING] This API previously used 0.625ms as the unit for its |
| rgrover1 | 334:6bc1223306b9 | 118 | * 'interval' argument. That required an explicit conversion from |
| rgrover1 | 334:6bc1223306b9 | 119 | * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is |
| rgrover1 | 334:6bc1223306b9 | 120 | * no longer required as the new units are milliseconds. Any application |
| rgrover1 | 334:6bc1223306b9 | 121 | * code depending on the old semantics would need to be updated accordingly. |
| rgrover1 | 257:7a50601356cc | 122 | */ |
| rgrover1 | 257:7a50601356cc | 123 | void setAdvertisingInterval(uint16_t interval); |
| rgrover1 | 257:7a50601356cc | 124 | |
| rgrover1 | 257:7a50601356cc | 125 | /** |
| rgrover1 | 325:501ad8b8bbe5 | 126 | * @return Minimum Advertising interval in milliseconds. |
| rgrover1 | 325:501ad8b8bbe5 | 127 | */ |
| rgrover1 | 325:501ad8b8bbe5 | 128 | uint16_t getMinAdvertisingInterval(void) const; |
| rgrover1 | 325:501ad8b8bbe5 | 129 | /** |
| rgrover1 | 325:501ad8b8bbe5 | 130 | * @return Minimum Advertising interval in milliseconds for non connectible mode. |
| rgrover1 | 325:501ad8b8bbe5 | 131 | */ |
| rgrover1 | 325:501ad8b8bbe5 | 132 | uint16_t getMinNonConnectableAdvertisingInterval(void) const; |
| rgrover1 | 325:501ad8b8bbe5 | 133 | /** |
| rgrover1 | 325:501ad8b8bbe5 | 134 | * @return Maximum Advertising interval in milliseconds. |
| rgrover1 | 325:501ad8b8bbe5 | 135 | */ |
| rgrover1 | 325:501ad8b8bbe5 | 136 | uint16_t getMaxAdvertisingInterval(void) const; |
| rgrover1 | 325:501ad8b8bbe5 | 137 | |
| rgrover1 | 325:501ad8b8bbe5 | 138 | /** |
| rgrover1 | 257:7a50601356cc | 139 | * @param[in] timeout |
| rgrover1 | 257:7a50601356cc | 140 | * Advertising timeout between 0x1 and 0x3FFF (1 and 16383) |
| rgrover1 | 257:7a50601356cc | 141 | * in seconds. Enter 0 to disable the advertising timeout. |
| rgrover1 | 257:7a50601356cc | 142 | */ |
| rgrover1 | 257:7a50601356cc | 143 | void setAdvertisingTimeout(uint16_t timeout); |
| rgrover1 | 257:7a50601356cc | 144 | |
| rgrover1 | 257:7a50601356cc | 145 | /** |
| rgrover1 | 257:7a50601356cc | 146 | * Please refer to the APIs above. |
| rgrover1 | 257:7a50601356cc | 147 | */ |
| rgrover1 | 257:7a50601356cc | 148 | void setAdvertisingParams(const GapAdvertisingParams &advParams); |
| rgrover1 | 257:7a50601356cc | 149 | |
| rgrover1 | 257:7a50601356cc | 150 | /** |
| rgrover1 | 409:37a4202649dd | 151 | * @return Read back advertising parameters. Useful for storing and |
| rgrover1 | 409:37a4202649dd | 152 | * restoring parameters rapidly. |
| rgrover1 | 409:37a4202649dd | 153 | */ |
| rgrover1 | 410:af8f2d1b67b6 | 154 | const GapAdvertisingParams &getAdvertisingParams(void) const; |
| rgrover1 | 409:37a4202649dd | 155 | |
| rgrover1 | 409:37a4202649dd | 156 | /** |
| rgrover1 | 257:7a50601356cc | 157 | * This API is typically used as an internal helper to udpate the transport |
| rgrover1 | 257:7a50601356cc | 158 | * backend with advertising data before starting to advertise. It may also |
| rgrover1 | 257:7a50601356cc | 159 | * be explicity used to dynamically reset the accumulated advertising |
| rgrover1 | 257:7a50601356cc | 160 | * payload and scanResponse; to do this, the application can clear and re- |
| rgrover1 | 257:7a50601356cc | 161 | * accumulate a new advertising payload (and scanResponse) before using this |
| rgrover1 | 257:7a50601356cc | 162 | * API. |
| rgrover1 | 257:7a50601356cc | 163 | */ |
| rgrover1 | 257:7a50601356cc | 164 | ble_error_t setAdvertisingPayload(void); |
| rgrover1 | 257:7a50601356cc | 165 | |
| rgrover1 | 257:7a50601356cc | 166 | /** |
| rgrover1 | 409:37a4202649dd | 167 | * Set advertising data using object. |
| rgrover1 | 409:37a4202649dd | 168 | */ |
| rgrover1 | 409:37a4202649dd | 169 | ble_error_t setAdvertisingData(const GapAdvertisingData &advData); |
| rgrover1 | 409:37a4202649dd | 170 | |
| rgrover1 | 409:37a4202649dd | 171 | /** |
| rgrover1 | 409:37a4202649dd | 172 | * @return Read back advertising data. Useful for storing and |
| rgrover1 | 409:37a4202649dd | 173 | * restoring payload. |
| rgrover1 | 409:37a4202649dd | 174 | */ |
| rgrover1 | 410:af8f2d1b67b6 | 175 | const GapAdvertisingData &getAdvertisingData(void) const; |
| rgrover1 | 409:37a4202649dd | 176 | |
| rgrover1 | 409:37a4202649dd | 177 | /** |
| rgrover1 | 257:7a50601356cc | 178 | * Reset any advertising payload prepared from prior calls to |
| rgrover1 | 257:7a50601356cc | 179 | * accumulateAdvertisingPayload(). |
| rgrover1 | 343:4d2576324b62 | 180 | * |
| rgrover1 | 343:4d2576324b62 | 181 | * Note: This should be followed by a call to setAdvertisingPayload() or |
| rgrover1 | 343:4d2576324b62 | 182 | * startAdvertising() before the update takes effect. |
| rgrover1 | 257:7a50601356cc | 183 | */ |
| rgrover1 | 257:7a50601356cc | 184 | void clearAdvertisingPayload(void); |
| rgrover1 | 257:7a50601356cc | 185 | |
| rgrover1 | 257:7a50601356cc | 186 | /** |
| rgrover1 | 257:7a50601356cc | 187 | * Accumulate an AD structure in the advertising payload. Please note that |
| rgrover1 | 257:7a50601356cc | 188 | * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used |
| rgrover1 | 257:7a50601356cc | 189 | * as an additional 31 bytes if the advertising payload proves to be too |
| rgrover1 | 257:7a50601356cc | 190 | * small. |
| rgrover1 | 257:7a50601356cc | 191 | * |
| rgrover1 | 257:7a50601356cc | 192 | * @param flags |
| rgrover1 | 257:7a50601356cc | 193 | * The flags to be added. Multiple flags may be specified in |
| rgrover1 | 257:7a50601356cc | 194 | * combination. |
| rgrover1 | 257:7a50601356cc | 195 | */ |
| rgrover1 | 257:7a50601356cc | 196 | ble_error_t accumulateAdvertisingPayload(uint8_t flags); |
| rgrover1 | 257:7a50601356cc | 197 | |
| rgrover1 | 257:7a50601356cc | 198 | /** |
| rgrover1 | 257:7a50601356cc | 199 | * Accumulate an AD structure in the advertising payload. Please note that |
| rgrover1 | 257:7a50601356cc | 200 | * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used |
| rgrover1 | 257:7a50601356cc | 201 | * as an additional 31 bytes if the advertising payload proves to be too |
| rgrover1 | 257:7a50601356cc | 202 | * small. |
| rgrover1 | 257:7a50601356cc | 203 | * |
| rgrover1 | 257:7a50601356cc | 204 | * @param app |
| rgrover1 | 257:7a50601356cc | 205 | * The appearance of the peripheral. |
| rgrover1 | 257:7a50601356cc | 206 | */ |
| rgrover1 | 257:7a50601356cc | 207 | ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app); |
| rgrover1 | 257:7a50601356cc | 208 | |
| rgrover1 | 257:7a50601356cc | 209 | /** |
| rgrover1 | 257:7a50601356cc | 210 | * Accumulate an AD structure in the advertising payload. Please note that |
| rgrover1 | 257:7a50601356cc | 211 | * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used |
| rgrover1 | 257:7a50601356cc | 212 | * as an additional 31 bytes if the advertising payload proves to be too |
| rgrover1 | 257:7a50601356cc | 213 | * small. |
| rgrover1 | 257:7a50601356cc | 214 | * |
| rgrover1 | 257:7a50601356cc | 215 | * @param app |
| rgrover1 | 257:7a50601356cc | 216 | * The max transmit power to be used by the controller. This is |
| rgrover1 | 257:7a50601356cc | 217 | * only a hint. |
| rgrover1 | 257:7a50601356cc | 218 | */ |
| rgrover1 | 257:7a50601356cc | 219 | ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power); |
| rgrover1 | 257:7a50601356cc | 220 | |
| rgrover1 | 257:7a50601356cc | 221 | /** |
| rgrover1 | 257:7a50601356cc | 222 | * Accumulate a variable length byte-stream as an AD structure in the |
| rgrover1 | 257:7a50601356cc | 223 | * advertising payload. Please note that the payload is limited to 31 bytes. |
| rgrover1 | 257:7a50601356cc | 224 | * The SCAN_RESPONSE message may be used as an additional 31 bytes if the |
| rgrover1 | 257:7a50601356cc | 225 | * advertising payload proves to be too small. |
| rgrover1 | 257:7a50601356cc | 226 | * |
| rgrover1 | 257:7a50601356cc | 227 | * @param type The type which describes the variable length data. |
| rgrover1 | 257:7a50601356cc | 228 | * @param data data bytes. |
| rgrover1 | 257:7a50601356cc | 229 | * @param len length of data. |
| rgrover1 | 257:7a50601356cc | 230 | */ |
| rgrover1 | 257:7a50601356cc | 231 | ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len); |
| rgrover1 | 257:7a50601356cc | 232 | |
| rgrover1 | 257:7a50601356cc | 233 | /** |
| rgrover1 | 257:7a50601356cc | 234 | * Accumulate a variable length byte-stream as an AD structure in the |
| rgrover1 | 257:7a50601356cc | 235 | * scanResponse payload. |
| rgrover1 | 257:7a50601356cc | 236 | * |
| rgrover1 | 257:7a50601356cc | 237 | * @param type The type which describes the variable length data. |
| rgrover1 | 257:7a50601356cc | 238 | * @param data data bytes. |
| rgrover1 | 257:7a50601356cc | 239 | * @param len length of data. |
| rgrover1 | 257:7a50601356cc | 240 | */ |
| rgrover1 | 257:7a50601356cc | 241 | ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len); |
| rgrover1 | 257:7a50601356cc | 242 | |
| rgrover1 | 257:7a50601356cc | 243 | /** |
| rgrover1 | 343:4d2576324b62 | 244 | * Reset any scan response prepared from prior calls to |
| rgrover1 | 343:4d2576324b62 | 245 | * accumulateScanResponse(). |
| rgrover1 | 343:4d2576324b62 | 246 | * |
| rgrover1 | 343:4d2576324b62 | 247 | * Note: This should be followed by a call to setAdvertisingPayload() or |
| rgrover1 | 343:4d2576324b62 | 248 | * startAdvertising() before the update takes effect. |
| rgrover1 | 343:4d2576324b62 | 249 | */ |
| rgrover1 | 343:4d2576324b62 | 250 | void clearScanResponse(void); |
| rgrover1 | 343:4d2576324b62 | 251 | |
| rgrover1 | 343:4d2576324b62 | 252 | /** |
| rgrover1 | 257:7a50601356cc | 253 | * Start advertising (GAP Discoverable, Connectable modes, Broadcast |
| rgrover1 | 257:7a50601356cc | 254 | * Procedure). |
| rgrover1 | 257:7a50601356cc | 255 | */ |
| rgrover1 | 257:7a50601356cc | 256 | ble_error_t startAdvertising(void); |
| rgrover1 | 257:7a50601356cc | 257 | |
| rgrover1 | 257:7a50601356cc | 258 | /** |
| rgrover1 | 257:7a50601356cc | 259 | * Stop advertising (GAP Discoverable, Connectable modes, Broadcast |
| rgrover1 | 257:7a50601356cc | 260 | * Procedure). |
| rgrover1 | 257:7a50601356cc | 261 | */ |
| rgrover1 | 257:7a50601356cc | 262 | ble_error_t stopAdvertising(void); |
| rgrover1 | 257:7a50601356cc | 263 | |
| rgrover1 | 335:dea9e14b7ddc | 264 | /** |
| rgrover1 | 380:2109a08c311c | 265 | * Setup parameters for GAP scanning--i.e. observer mode. |
| rgrover1 | 380:2109a08c311c | 266 | * @param interval Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s]. |
| rgrover1 | 380:2109a08c311c | 267 | * @param window Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s]. |
| rgrover1 | 380:2109a08c311c | 268 | * @param timeout Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout. |
| rgrover1 | 396:039ee79c9924 | 269 | * @param activeScanning Set to True if active-scanning is required. This is used to fetch the |
| rgrover1 | 396:039ee79c9924 | 270 | * scan response from a peer if possible. |
| rgrover1 | 390:4bf41689c7f9 | 271 | * |
| rgrover1 | 390:4bf41689c7f9 | 272 | * The scanning window divided by the interval determines the duty cycle for |
| rgrover1 | 390:4bf41689c7f9 | 273 | * scanning. For example, if the interval is 100ms and the window is 10ms, |
| rgrover1 | 390:4bf41689c7f9 | 274 | * then the controller will scan for 10 percent of the time. It is possible |
| rgrover1 | 390:4bf41689c7f9 | 275 | * to have the interval and window set to the same value. In this case, |
| rgrover1 | 390:4bf41689c7f9 | 276 | * scanning is continuous, with a change of scanning frequency once every |
| rgrover1 | 390:4bf41689c7f9 | 277 | * interval. |
| rgrover1 | 390:4bf41689c7f9 | 278 | * |
| rgrover1 | 390:4bf41689c7f9 | 279 | * Once the scanning parameters have been configured, scanning can be |
| rgrover1 | 390:4bf41689c7f9 | 280 | * enabled by using startScan(). |
| rgrover1 | 390:4bf41689c7f9 | 281 | * |
| rgrover1 | 390:4bf41689c7f9 | 282 | * @Note: The scan interval and window are recommendations to the BLE stack. |
| rgrover1 | 380:2109a08c311c | 283 | */ |
| rgrover1 | 394:598368c24bbb | 284 | ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX, |
| rgrover1 | 394:598368c24bbb | 285 | uint16_t window = GapScanningParams::SCAN_WINDOW_MAX, |
| rgrover1 | 394:598368c24bbb | 286 | uint16_t timeout = 0, |
| rgrover1 | 394:598368c24bbb | 287 | bool activeScanning = false); |
| rgrover1 | 392:3201f029c2eb | 288 | ble_error_t setScanInterval(uint16_t interval); |
| rgrover1 | 392:3201f029c2eb | 289 | ble_error_t setScanWindow (uint16_t window); |
| rgrover1 | 392:3201f029c2eb | 290 | ble_error_t setScanTimeout (uint16_t timeout); |
| rgrover1 | 395:4124520c17fc | 291 | void setActiveScan (bool activeScanning); |
| rgrover1 | 380:2109a08c311c | 292 | |
| rgrover1 | 380:2109a08c311c | 293 | /** |
| rgrover1 | 380:2109a08c311c | 294 | * Start scanning (Observer Procedure) based on the scan-params currently |
| rgrover1 | 380:2109a08c311c | 295 | * in effect. |
| rgrover1 | 380:2109a08c311c | 296 | * |
| rgrover1 | 380:2109a08c311c | 297 | * @param callback The application callback to be invoked upon receiving |
| rgrover1 | 380:2109a08c311c | 298 | * every advertisement report. Can be passed in as NULL, in which case |
| rgrover1 | 380:2109a08c311c | 299 | * scanning may not be enabled at all. |
| rgrover1 | 380:2109a08c311c | 300 | */ |
| rgrover1 | 406:cec6778acc66 | 301 | ble_error_t startScan(void (*callback)(const Gap::AdvertisementCallbackParams_t *params)); |
| rgrover1 | 380:2109a08c311c | 302 | |
| rgrover1 | 380:2109a08c311c | 303 | /** |
| rgrover1 | 407:ca6b956b33d1 | 304 | * Start scanning (Observer Procedure) based on the scan-params currently |
| rgrover1 | 407:ca6b956b33d1 | 305 | * in effect. |
| rgrover1 | 407:ca6b956b33d1 | 306 | * |
| rgrover1 | 407:ca6b956b33d1 | 307 | * @param[in] object |
| rgrover1 | 407:ca6b956b33d1 | 308 | * @param[in] callbackMember |
| rgrover1 | 407:ca6b956b33d1 | 309 | * The above pair of parameters define the callback object |
| rgrover1 | 407:ca6b956b33d1 | 310 | * and member function to receive the advertisement params. |
| rgrover1 | 407:ca6b956b33d1 | 311 | */ |
| rgrover1 | 407:ca6b956b33d1 | 312 | template<typename T> |
| rgrover1 | 407:ca6b956b33d1 | 313 | ble_error_t startScan(T *object, void (T::*memberCallback)(const Gap::AdvertisementCallbackParams_t *params)); |
| rgrover1 | 407:ca6b956b33d1 | 314 | |
| rgrover1 | 407:ca6b956b33d1 | 315 | /** |
| rgrover1 | 380:2109a08c311c | 316 | * Stop scanning. The current scanning parameters remain in effect. |
| rgrover1 | 380:2109a08c311c | 317 | * |
| rgrover1 | 380:2109a08c311c | 318 | * @retval BLE_ERROR_NONE if successfully stopped scanning procedure. |
| rgrover1 | 380:2109a08c311c | 319 | */ |
| rgrover1 | 392:3201f029c2eb | 320 | ble_error_t stopScan(void); |
| rgrover1 | 380:2109a08c311c | 321 | |
| rgrover1 | 441:2d864886aeca | 322 | ble_error_t connect(const Gap::Address_t peerAddr, Gap::AddressType_t peerAddrType = Gap::ADDR_TYPE_RANDOM_STATIC); |
| rgrover1 | 441:2d864886aeca | 323 | |
| rgrover1 | 380:2109a08c311c | 324 | /** |
| rgrover1 | 335:dea9e14b7ddc | 325 | * This call initiates the disconnection procedure, and its completion will |
| rgrover1 | 335:dea9e14b7ddc | 326 | * be communicated to the application with an invocation of the |
| rgrover1 | 335:dea9e14b7ddc | 327 | * onDisconnection callback. |
| rgrover1 | 335:dea9e14b7ddc | 328 | * |
| rgrover1 | 335:dea9e14b7ddc | 329 | * @param reason |
| rgrover1 | 335:dea9e14b7ddc | 330 | * The reason for disconnection to be sent back to the peer. |
| rgrover1 | 335:dea9e14b7ddc | 331 | */ |
| rgrover1 | 257:7a50601356cc | 332 | ble_error_t disconnect(Gap::DisconnectionReason_t reason); |
| rgrover1 | 257:7a50601356cc | 333 | |
| rgrover1 | 257:7a50601356cc | 334 | /* APIs to set GAP callbacks. */ |
| rgrover1 | 257:7a50601356cc | 335 | void onTimeout(Gap::EventCallback_t timeoutCallback); |
| rgrover1 | 257:7a50601356cc | 336 | |
| rgrover1 | 257:7a50601356cc | 337 | void onConnection(Gap::ConnectionEventCallback_t connectionCallback); |
| rgrover1 | 257:7a50601356cc | 338 | /** |
| rgrover1 | 257:7a50601356cc | 339 | * Used to setup a callback for GAP disconnection. |
| rgrover1 | 257:7a50601356cc | 340 | */ |
| rgrover1 | 257:7a50601356cc | 341 | void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback); |
| rgrover1 | 257:7a50601356cc | 342 | |
| rgrover1 | 257:7a50601356cc | 343 | /** |
| rgrover1 | 257:7a50601356cc | 344 | * Append to a chain of callbacks to be invoked upon disconnection; these |
| rgrover1 | 257:7a50601356cc | 345 | * callbacks receive no context and are therefore different from the |
| rgrover1 | 257:7a50601356cc | 346 | * onDisconnection callback. |
| rgrover1 | 257:7a50601356cc | 347 | */ |
| rgrover1 | 257:7a50601356cc | 348 | template<typename T> |
| rgrover1 | 257:7a50601356cc | 349 | void addToDisconnectionCallChain(T *tptr, void (T::*mptr)(void)); |
| rgrover1 | 257:7a50601356cc | 350 | |
| rgrover1 | 257:7a50601356cc | 351 | /** |
| rgrover1 | 261:b275bfc773b9 | 352 | * Add a callback for the GATT event DATA_SENT (which is triggered when |
| rgrover1 | 261:b275bfc773b9 | 353 | * updates are sent out by GATT in the form of notifications). |
| rgrover1 | 259:a95264ad705c | 354 | * |
| rgrover1 | 259:a95264ad705c | 355 | * @Note: it is possible to chain together multiple onDataSent callbacks |
| rgrover1 | 259:a95264ad705c | 356 | * (potentially from different modules of an application) to receive updates |
| rgrover1 | 260:ea7f9f14cc15 | 357 | * to characteristics. |
| rgrover1 | 259:a95264ad705c | 358 | * |
| rgrover1 | 259:a95264ad705c | 359 | * @Note: it is also possible to setup a callback into a member function of |
| rgrover1 | 259:a95264ad705c | 360 | * some object. |
| rgrover1 | 257:7a50601356cc | 361 | */ |
| rgrover1 | 259:a95264ad705c | 362 | void onDataSent(void (*callback)(unsigned count)); |
| rgrover1 | 259:a95264ad705c | 363 | template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count)); |
| rgrover1 | 257:7a50601356cc | 364 | |
| rgrover1 | 257:7a50601356cc | 365 | /** |
| rgrover1 | 257:7a50601356cc | 366 | * Setup a callback for when a characteristic has its value updated by a |
| rgrover1 | 257:7a50601356cc | 367 | * client. |
| rgrover1 | 257:7a50601356cc | 368 | * |
| rgrover1 | 257:7a50601356cc | 369 | * @Note: it is possible to chain together multiple onDataWritten callbacks |
| rgrover1 | 257:7a50601356cc | 370 | * (potentially from different modules of an application) to receive updates |
| rgrover1 | 257:7a50601356cc | 371 | * to characteristics. Many services, such as DFU and UART add their own |
| rgrover1 | 257:7a50601356cc | 372 | * onDataWritten callbacks behind the scenes to trap interesting events. |
| rgrover1 | 257:7a50601356cc | 373 | * |
| rgrover1 | 257:7a50601356cc | 374 | * @Note: it is also possible to setup a callback into a member function of |
| rgrover1 | 257:7a50601356cc | 375 | * some object. |
| rgrover1 | 257:7a50601356cc | 376 | */ |
| rgrover1 | 257:7a50601356cc | 377 | void onDataWritten(void (*callback)(const GattCharacteristicWriteCBParams *eventDataP)); |
| rgrover1 | 257:7a50601356cc | 378 | template <typename T> void onDataWritten(T * objPtr, void (T::*memberPtr)(const GattCharacteristicWriteCBParams *context)); |
| rgrover1 | 257:7a50601356cc | 379 | |
| rgrover1 | 300:d9a39f759a6a | 380 | /** |
| rgrover1 | 300:d9a39f759a6a | 381 | * Setup a callback for when a characteristic is being read by a client. |
| rgrover1 | 300:d9a39f759a6a | 382 | * |
| rgrover1 | 300:d9a39f759a6a | 383 | * @Note: this functionality may not be available on all underlying stacks. |
| rgrover1 | 300:d9a39f759a6a | 384 | * You could use GattCharacteristic::setReadAuthorizationCallback() as an |
| rgrover1 | 300:d9a39f759a6a | 385 | * alternative. |
| rgrover1 | 300:d9a39f759a6a | 386 | * |
| rgrover1 | 300:d9a39f759a6a | 387 | * @Note: it is possible to chain together multiple onDataRead callbacks |
| rgrover1 | 300:d9a39f759a6a | 388 | * (potentially from different modules of an application) to receive updates |
| rgrover1 | 300:d9a39f759a6a | 389 | * to characteristics. Services may add their own onDataRead callbacks |
| rgrover1 | 300:d9a39f759a6a | 390 | * behind the scenes to trap interesting events. |
| rgrover1 | 300:d9a39f759a6a | 391 | * |
| rgrover1 | 300:d9a39f759a6a | 392 | * @Note: it is also possible to setup a callback into a member function of |
| rgrover1 | 300:d9a39f759a6a | 393 | * some object. |
| rgrover1 | 300:d9a39f759a6a | 394 | * |
| rgrover1 | 300:d9a39f759a6a | 395 | * @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available; |
| rgrover1 | 300:d9a39f759a6a | 396 | * else BLE_ERROR_NONE. |
| rgrover1 | 300:d9a39f759a6a | 397 | */ |
| rgrover1 | 300:d9a39f759a6a | 398 | ble_error_t onDataRead(void (*callback)(const GattCharacteristicReadCBParams *eventDataP)); |
| rgrover1 | 300:d9a39f759a6a | 399 | template <typename T> ble_error_t onDataRead(T * objPtr, void (T::*memberPtr)(const GattCharacteristicReadCBParams *context)); |
| rgrover1 | 300:d9a39f759a6a | 400 | |
| rgrover1 | 257:7a50601356cc | 401 | void onUpdatesEnabled(GattServer::EventCallback_t callback); |
| rgrover1 | 257:7a50601356cc | 402 | void onUpdatesDisabled(GattServer::EventCallback_t callback); |
| rgrover1 | 257:7a50601356cc | 403 | void onConfirmationReceived(GattServer::EventCallback_t callback); |
| rgrover1 | 257:7a50601356cc | 404 | |
| rgrover1 | 257:7a50601356cc | 405 | /** |
| rgrover1 | 341:8a104d9d80c1 | 406 | * Radio Notification is a feature that enables ACTIVE and INACTIVE |
| rgrover1 | 341:8a104d9d80c1 | 407 | * (nACTIVE) signals from the stack that notify the application when the |
| rgrover1 | 341:8a104d9d80c1 | 408 | * radio is in use. The signal is sent using software interrupt. |
| rgrover1 | 341:8a104d9d80c1 | 409 | * |
| rgrover1 | 341:8a104d9d80c1 | 410 | * The ACTIVE signal is sent before the Radio Event starts. The nACTIVE |
| rgrover1 | 341:8a104d9d80c1 | 411 | * signal is sent at the end of the Radio Event. These signals can be used |
| rgrover1 | 341:8a104d9d80c1 | 412 | * by the application programmer to synchronize application logic with radio |
| rgrover1 | 341:8a104d9d80c1 | 413 | * activity. For example, the ACTIVE signal can be used to shut off external |
| rgrover1 | 341:8a104d9d80c1 | 414 | * devices to manage peak current drawn during periods when the radio is on, |
| rgrover1 | 341:8a104d9d80c1 | 415 | * or to trigger sensor data collection for transmission in the Radio Event. |
| rgrover1 | 341:8a104d9d80c1 | 416 | * |
| rgrover1 | 341:8a104d9d80c1 | 417 | * @param callback |
| rgrover1 | 341:8a104d9d80c1 | 418 | * The application handler to be invoked in response to a radio |
| rgrover1 | 341:8a104d9d80c1 | 419 | * ACTIVE/INACTIVE event. |
| rgrover1 | 341:8a104d9d80c1 | 420 | */ |
| rgrover1 | 341:8a104d9d80c1 | 421 | void onRadioNotification(Gap::RadioNotificationEventCallback_t callback); |
| rgrover1 | 341:8a104d9d80c1 | 422 | |
| rgrover1 | 341:8a104d9d80c1 | 423 | /** |
| rgrover1 | 257:7a50601356cc | 424 | * Add a service declaration to the local server ATT table. Also add the |
| rgrover1 | 257:7a50601356cc | 425 | * characteristics contained within. |
| rgrover1 | 257:7a50601356cc | 426 | */ |
| rgrover1 | 257:7a50601356cc | 427 | ble_error_t addService(GattService &service); |
| rgrover1 | 257:7a50601356cc | 428 | |
| rgrover1 | 336:896e159d3af6 | 429 | /** |
| rgrover1 | 336:896e159d3af6 | 430 | * Returns the current GAP state of the device using a bitmask which |
| rgrover1 | 336:896e159d3af6 | 431 | * describes whether the device is advertising and/or connected. |
| rgrover1 | 336:896e159d3af6 | 432 | */ |
| rgrover1 | 257:7a50601356cc | 433 | Gap::GapState_t getGapState(void) const; |
| rgrover1 | 257:7a50601356cc | 434 | |
| rgrover1 | 257:7a50601356cc | 435 | /** |
| rgrover1 | 257:7a50601356cc | 436 | * @param[in/out] lengthP |
| rgrover1 | 257:7a50601356cc | 437 | * input: Length in bytes to be read, |
| rgrover1 | 257:7a50601356cc | 438 | * output: Total length of attribute value upon successful return. |
| rgrover1 | 257:7a50601356cc | 439 | */ |
| rgrover1 | 328:1fd12f67ed7a | 440 | ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP); |
| rgrover1 | 342:152bd9c825d6 | 441 | /** |
| rgrover1 | 342:152bd9c825d6 | 442 | * A version of the same as above with connection handle parameter to allow fetches for connection-specific multivalued attribtues (such as the CCCDs). |
| rgrover1 | 342:152bd9c825d6 | 443 | */ |
| rgrover1 | 342:152bd9c825d6 | 444 | ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP); |
| rgrover1 | 257:7a50601356cc | 445 | |
| rgrover1 | 257:7a50601356cc | 446 | /** |
| rgrover1 | 257:7a50601356cc | 447 | * @param localOnly |
| rgrover1 | 257:7a50601356cc | 448 | * Only update the characteristic locally regardless of notify/indicate flags in the CCCD. |
| rgrover1 | 257:7a50601356cc | 449 | */ |
| rgrover1 | 328:1fd12f67ed7a | 450 | ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle, const uint8_t *value, uint16_t size, bool localOnly = false); |
| rgrover1 | 342:152bd9c825d6 | 451 | /** |
| rgrover1 | 342:152bd9c825d6 | 452 | * A version of the same as above with connection handle parameter to allow updates for connection-specific multivalued attribtues (such as the CCCDs). |
| rgrover1 | 342:152bd9c825d6 | 453 | */ |
| rgrover1 | 342:152bd9c825d6 | 454 | ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, const uint8_t *value, uint16_t size, bool localOnly = false); |
| rgrover1 | 257:7a50601356cc | 455 | |
| rgrover1 | 257:7a50601356cc | 456 | /** |
| rgrover1 | 257:7a50601356cc | 457 | * Yield control to the BLE stack or to other tasks waiting for events. This |
| rgrover1 | 257:7a50601356cc | 458 | * is a sleep function which will return when there is an application |
| rgrover1 | 257:7a50601356cc | 459 | * specific interrupt, but the MCU might wake up several times before |
| rgrover1 | 257:7a50601356cc | 460 | * returning (to service the stack). This is not always interchangeable with |
| rgrover1 | 257:7a50601356cc | 461 | * WFE(). |
| rgrover1 | 257:7a50601356cc | 462 | */ |
| rgrover1 | 257:7a50601356cc | 463 | void waitForEvent(void); |
| rgrover1 | 257:7a50601356cc | 464 | |
| rgrover1 | 257:7a50601356cc | 465 | ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params); |
| rgrover1 | 257:7a50601356cc | 466 | ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params); |
| rgrover1 | 257:7a50601356cc | 467 | ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params); |
| rgrover1 | 257:7a50601356cc | 468 | |
| rgrover1 | 257:7a50601356cc | 469 | /** |
| rgrover1 | 257:7a50601356cc | 470 | * This call allows the application to get the BLE stack version information. |
| rgrover1 | 257:7a50601356cc | 471 | * |
| rgrover1 | 257:7a50601356cc | 472 | * @return A pointer to a const string representing the version. |
| rgrover1 | 257:7a50601356cc | 473 | * Note: The string is owned by the BLE_API. |
| rgrover1 | 257:7a50601356cc | 474 | */ |
| rgrover1 | 257:7a50601356cc | 475 | const char *getVersion(void); |
| rgrover1 | 257:7a50601356cc | 476 | |
| rgrover1 | 257:7a50601356cc | 477 | /** |
| rgrover1 | 257:7a50601356cc | 478 | * Set the device name characteristic in the GAP service. |
| rgrover1 | 257:7a50601356cc | 479 | * @param deviceName The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string. |
| rgrover1 | 257:7a50601356cc | 480 | */ |
| rgrover1 | 257:7a50601356cc | 481 | ble_error_t setDeviceName(const uint8_t *deviceName); |
| rgrover1 | 257:7a50601356cc | 482 | |
| rgrover1 | 257:7a50601356cc | 483 | /** |
| rgrover1 | 257:7a50601356cc | 484 | * Get the value of the device name characteristic in the GAP service. |
| rgrover1 | 257:7a50601356cc | 485 | * @param[out] deviceName Pointer to an empty buffer where the UTF-8 *non NULL- |
| rgrover1 | 257:7a50601356cc | 486 | * terminated* string will be placed. Set this |
| rgrover1 | 257:7a50601356cc | 487 | * value to NULL in order to obtain the deviceName-length |
| rgrover1 | 257:7a50601356cc | 488 | * from the 'length' parameter. |
| rgrover1 | 257:7a50601356cc | 489 | * |
| rgrover1 | 257:7a50601356cc | 490 | * @param[in/out] lengthP (on input) Length of the buffer pointed to by deviceName; |
| rgrover1 | 257:7a50601356cc | 491 | * (on output) the complete device name length (without the |
| rgrover1 | 257:7a50601356cc | 492 | * null terminator). |
| rgrover1 | 257:7a50601356cc | 493 | * |
| rgrover1 | 257:7a50601356cc | 494 | * @note If the device name is longer than the size of the supplied buffer, |
| rgrover1 | 257:7a50601356cc | 495 | * length will return the complete device name length, |
| rgrover1 | 257:7a50601356cc | 496 | * and not the number of bytes actually returned in deviceName. |
| rgrover1 | 257:7a50601356cc | 497 | * The application may use this information to retry with a suitable buffer size. |
| rgrover1 | 257:7a50601356cc | 498 | * |
| rgrover1 | 257:7a50601356cc | 499 | * Sample use: |
| rgrover1 | 257:7a50601356cc | 500 | * uint8_t deviceName[20]; |
| rgrover1 | 257:7a50601356cc | 501 | * unsigned length = sizeof(deviceName); |
| rgrover1 | 257:7a50601356cc | 502 | * ble.getDeviceName(deviceName, &length); |
| rgrover1 | 257:7a50601356cc | 503 | * if (length < sizeof(deviceName)) { |
| rgrover1 | 257:7a50601356cc | 504 | * deviceName[length] = 0; |
| rgrover1 | 257:7a50601356cc | 505 | * } |
| rgrover1 | 257:7a50601356cc | 506 | * DEBUG("length: %u, deviceName: %s\r\n", length, deviceName); |
| rgrover1 | 257:7a50601356cc | 507 | */ |
| rgrover1 | 257:7a50601356cc | 508 | ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP); |
| rgrover1 | 257:7a50601356cc | 509 | |
| rgrover1 | 257:7a50601356cc | 510 | /** |
| rgrover1 | 257:7a50601356cc | 511 | * Set the appearance characteristic in the GAP service. |
| rgrover1 | 257:7a50601356cc | 512 | * @param[in] appearance The new value for the device-appearance. |
| rgrover1 | 257:7a50601356cc | 513 | */ |
| rgrover1 | 257:7a50601356cc | 514 | ble_error_t setAppearance(uint16_t appearance); |
| rgrover1 | 257:7a50601356cc | 515 | |
| rgrover1 | 257:7a50601356cc | 516 | /** |
| rgrover1 | 257:7a50601356cc | 517 | * Set the appearance characteristic in the GAP service. |
| rgrover1 | 257:7a50601356cc | 518 | * @param[out] appearance The new value for the device-appearance. |
| rgrover1 | 257:7a50601356cc | 519 | */ |
| rgrover1 | 257:7a50601356cc | 520 | ble_error_t getAppearance(uint16_t *appearanceP); |
| rgrover1 | 257:7a50601356cc | 521 | |
| rgrover1 | 257:7a50601356cc | 522 | /** |
| rgrover1 | 257:7a50601356cc | 523 | * Set the radio's transmit power. |
| rgrover1 | 257:7a50601356cc | 524 | * @param[in] txPower Radio transmit power in dBm. |
| rgrover1 | 257:7a50601356cc | 525 | */ |
| rgrover1 | 257:7a50601356cc | 526 | ble_error_t setTxPower(int8_t txPower); |
| rgrover1 | 257:7a50601356cc | 527 | |
| rgrover1 | 305:71367f7cd078 | 528 | /** |
| rgrover1 | 305:71367f7cd078 | 529 | * Query the underlying stack for permitted arguments for setTxPower(). |
| rgrover1 | 305:71367f7cd078 | 530 | * |
| rgrover1 | 305:71367f7cd078 | 531 | * @param[out] valueArrayPP |
| rgrover1 | 305:71367f7cd078 | 532 | * Out parameter to receive the immutable array of Tx values. |
| rgrover1 | 305:71367f7cd078 | 533 | * @param[out] countP |
| rgrover1 | 305:71367f7cd078 | 534 | * Out parameter to receive the array's size. |
| rgrover1 | 305:71367f7cd078 | 535 | */ |
| rgrover1 | 305:71367f7cd078 | 536 | void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP); |
| rgrover1 | 305:71367f7cd078 | 537 | |
| rgrover1 | 347:20be4234c6fe | 538 | /** |
| rgrover1 | 347:20be4234c6fe | 539 | * Enable the BLE stack's Security Manager. The Security Manager implements |
| rgrover1 | 347:20be4234c6fe | 540 | * the actual cryptographic algorithms and protocol exchanges that allow two |
| rgrover1 | 347:20be4234c6fe | 541 | * devices to securely exchange data and privately detect each other. |
| rgrover1 | 347:20be4234c6fe | 542 | * Calling this API is a prerequisite for encryption and pairing (bonding). |
| rgrover1 | 357:d4bb5d2b837a | 543 | * |
| rgrover1 | 357:d4bb5d2b837a | 544 | * @param[in] enableBonding Allow for bonding. |
| rgrover1 | 357:d4bb5d2b837a | 545 | * @param[in] requireMITM Require protection for man-in-the-middle attacks. |
| rgrover1 | 357:d4bb5d2b837a | 546 | * @param[in] iocaps To specify IO capabilities of this peripheral, |
| rgrover1 | 357:d4bb5d2b837a | 547 | * such as availability of a display or keyboard to |
| rgrover1 | 357:d4bb5d2b837a | 548 | * support out-of-band exchanges of security data. |
| rgrover1 | 357:d4bb5d2b837a | 549 | * @param[in] passkey To specify a static passkey. |
| rgrover1 | 357:d4bb5d2b837a | 550 | * |
| rgrover1 | 357:d4bb5d2b837a | 551 | * @return BLE_ERROR_NONE on success. |
| rgrover1 | 347:20be4234c6fe | 552 | */ |
| rgrover1 | 357:d4bb5d2b837a | 553 | ble_error_t initializeSecurity(bool enableBonding = true, |
| rgrover1 | 357:d4bb5d2b837a | 554 | bool requireMITM = true, |
| rgrover1 | 357:d4bb5d2b837a | 555 | Gap::SecurityIOCapabilities_t iocaps = Gap::IO_CAPS_NONE, |
| rgrover1 | 357:d4bb5d2b837a | 556 | const Gap::Passkey_t passkey = NULL); |
| rgrover1 | 347:20be4234c6fe | 557 | |
| rgrover1 | 368:89726b616c1b | 558 | /** |
| rgrover1 | 368:89726b616c1b | 559 | * Setup a callback for when the security setup procedure (key generation |
| rgrover1 | 368:89726b616c1b | 560 | * and exchange) for a link has started. This will be skipped for bonded |
| rgrover1 | 368:89726b616c1b | 561 | * devices. The callback is passed in parameters received from the peer's |
| rgrover1 | 368:89726b616c1b | 562 | * security request: bool allowBonding, bool requireMITM, and |
| rgrover1 | 368:89726b616c1b | 563 | * SecurityIOCapabilities_t. |
| rgrover1 | 368:89726b616c1b | 564 | */ |
| rgrover1 | 368:89726b616c1b | 565 | void onSecuritySetupInitiated(Gap::SecuritySetupInitiatedCallback_t callback); |
| rgrover1 | 368:89726b616c1b | 566 | |
| rgrover1 | 368:89726b616c1b | 567 | /** |
| rgrover1 | 368:89726b616c1b | 568 | * Setup a callback for when the security setup procedure (key generation |
| rgrover1 | 368:89726b616c1b | 569 | * and exchange) for a link has completed. This will be skipped for bonded |
| rgrover1 | 368:89726b616c1b | 570 | * devices. The callback is passed in the success/failure status of the |
| rgrover1 | 368:89726b616c1b | 571 | * security setup procedure. |
| rgrover1 | 368:89726b616c1b | 572 | */ |
| rgrover1 | 368:89726b616c1b | 573 | void onSecuritySetupCompleted(Gap::SecuritySetupCompletedCallback_t callback); |
| rgrover1 | 368:89726b616c1b | 574 | |
| rgrover1 | 368:89726b616c1b | 575 | /** |
| rgrover1 | 368:89726b616c1b | 576 | * Setup a callback for when a link with the peer is secured. For bonded |
| rgrover1 | 368:89726b616c1b | 577 | * devices, subsequent reconnections with bonded peer will result only in |
| rgrover1 | 368:89726b616c1b | 578 | * this callback when the link is secured and setup procedures will not |
| rgrover1 | 368:89726b616c1b | 579 | * occur unless the bonding information is either lost or deleted on either |
| rgrover1 | 368:89726b616c1b | 580 | * or both sides. The callback is passed in a Gap::SecurityMode_t according |
| rgrover1 | 368:89726b616c1b | 581 | * to the level of security in effect for the secured link. |
| rgrover1 | 368:89726b616c1b | 582 | */ |
| rgrover1 | 368:89726b616c1b | 583 | void onLinkSecured(Gap::LinkSecuredCallback_t callback); |
| rgrover1 | 368:89726b616c1b | 584 | |
| rgrover1 | 368:89726b616c1b | 585 | /** |
| rgrover1 | 368:89726b616c1b | 586 | * Setup a callback for successful bonding; i.e. that link-specific security |
| rgrover1 | 368:89726b616c1b | 587 | * context is stored persistently for a peer device. |
| rgrover1 | 368:89726b616c1b | 588 | */ |
| rgrover1 | 368:89726b616c1b | 589 | void onSecurityContextStored(Gap::HandleSpecificEvent_t callback); |
| rgrover1 | 368:89726b616c1b | 590 | |
| rgrover1 | 368:89726b616c1b | 591 | /** |
| rgrover1 | 369:9a76cc068644 | 592 | * Setup a callback for when the passkey needs to be displayed on a |
| rgrover1 | 369:9a76cc068644 | 593 | * peripheral with DISPLAY capability. This happens when security is |
| rgrover1 | 369:9a76cc068644 | 594 | * configured to prevent Man-In-The-Middle attacks, and a PIN (or passkey) |
| rgrover1 | 369:9a76cc068644 | 595 | * needs to be exchanged between the peers to authenticate the connection |
| rgrover1 | 369:9a76cc068644 | 596 | * attempt. |
| rgrover1 | 369:9a76cc068644 | 597 | */ |
| rgrover1 | 369:9a76cc068644 | 598 | void onPasskeyDisplay(Gap::PasskeyDisplayCallback_t callback); |
| rgrover1 | 369:9a76cc068644 | 599 | |
| rgrover1 | 369:9a76cc068644 | 600 | /** |
| rgrover1 | 368:89726b616c1b | 601 | * Get the security status of a connection. |
| rgrover1 | 368:89726b616c1b | 602 | * |
| rgrover1 | 368:89726b616c1b | 603 | * @param[in] connectionHandle Handle to identify the connection. |
| rgrover1 | 368:89726b616c1b | 604 | * @param[out] securityStatusP security status. |
| rgrover1 | 368:89726b616c1b | 605 | * |
| rgrover1 | 368:89726b616c1b | 606 | * @return BLE_SUCCESS Or appropriate error code indicating reason for failure. |
| rgrover1 | 368:89726b616c1b | 607 | */ |
| rgrover1 | 368:89726b616c1b | 608 | ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, Gap::LinkSecurityStatus_t *securityStatusP); |
| rgrover1 | 368:89726b616c1b | 609 | |
| rgrover1 | 371:6c73b5970f2d | 610 | /** |
| rgrover1 | 371:6c73b5970f2d | 611 | * Delete all peer device context and all related bonding information from |
| rgrover1 | 371:6c73b5970f2d | 612 | * the database within the security manager. |
| rgrover1 | 371:6c73b5970f2d | 613 | * |
| rgrover1 | 371:6c73b5970f2d | 614 | * @retval BLE_ERROR_NONE On success, else an error code indicating reason for failure. |
| rgrover1 | 371:6c73b5970f2d | 615 | * @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization and/or |
| rgrover1 | 371:6c73b5970f2d | 616 | * application registration. |
| rgrover1 | 371:6c73b5970f2d | 617 | */ |
| rgrover1 | 371:6c73b5970f2d | 618 | ble_error_t purgeAllBondingState(void); |
| rgrover1 | 371:6c73b5970f2d | 619 | |
| rgrover1 | 257:7a50601356cc | 620 | public: |
| rgrover1 | 383:7bd527ea7280 | 621 | BLEDevice() : transport(createBLEDeviceInstance()), advParams(), advPayload(), scanResponse(), needToSetAdvPayload(true), scanningParams() { |
| rgrover1 | 257:7a50601356cc | 622 | advPayload.clear(); |
| rgrover1 | 257:7a50601356cc | 623 | scanResponse.clear(); |
| rgrover1 | 257:7a50601356cc | 624 | } |
| rgrover1 | 257:7a50601356cc | 625 | |
| rgrover1 | 257:7a50601356cc | 626 | private: |
| rgrover1 | 257:7a50601356cc | 627 | BLEDeviceInstanceBase *const transport; /* the device specific backend */ |
| rgrover1 | 257:7a50601356cc | 628 | |
| rgrover1 | 257:7a50601356cc | 629 | GapAdvertisingParams advParams; |
| rgrover1 | 257:7a50601356cc | 630 | GapAdvertisingData advPayload; |
| rgrover1 | 257:7a50601356cc | 631 | GapAdvertisingData scanResponse; |
| rgrover1 | 257:7a50601356cc | 632 | |
| rgrover1 | 257:7a50601356cc | 633 | /* Accumulation of AD structures in the advertisement payload should |
| rgrover1 | 257:7a50601356cc | 634 | * eventually result in a call to the target's setAdvertisingData() before |
| rgrover1 | 257:7a50601356cc | 635 | * the server begins advertising. This flag marks the status of the pending update.*/ |
| rgrover1 | 257:7a50601356cc | 636 | bool needToSetAdvPayload; |
| rgrover1 | 380:2109a08c311c | 637 | |
| rgrover1 | 380:2109a08c311c | 638 | GapScanningParams scanningParams; |
| rgrover1 | 257:7a50601356cc | 639 | }; |
| rgrover1 | 257:7a50601356cc | 640 | |
| rgrover1 | 257:7a50601356cc | 641 | /* BLEDevice methods. Most of these simply forward the calls to the underlying |
| rgrover1 | 257:7a50601356cc | 642 | * transport.*/ |
| rgrover1 | 257:7a50601356cc | 643 | |
| rgrover1 | 257:7a50601356cc | 644 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 645 | BLEDevice::reset(void) |
| rgrover1 | 257:7a50601356cc | 646 | { |
| rgrover1 | 257:7a50601356cc | 647 | return transport->reset(); |
| rgrover1 | 257:7a50601356cc | 648 | } |
| rgrover1 | 257:7a50601356cc | 649 | |
| rgrover1 | 257:7a50601356cc | 650 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 651 | BLEDevice::shutdown(void) |
| rgrover1 | 257:7a50601356cc | 652 | { |
| rgrover1 | 257:7a50601356cc | 653 | clearAdvertisingPayload(); |
| rgrover1 | 257:7a50601356cc | 654 | return transport->shutdown(); |
| rgrover1 | 257:7a50601356cc | 655 | } |
| rgrover1 | 257:7a50601356cc | 656 | |
| rgrover1 | 257:7a50601356cc | 657 | inline ble_error_t |
| rgrover1 | 424:370d5f1f292f | 658 | BLEDevice::setAddress(Gap::AddressType_t type, const Gap::address_t address) |
| rgrover1 | 257:7a50601356cc | 659 | { |
| rgrover1 | 257:7a50601356cc | 660 | return transport->getGap().setAddress(type, address); |
| rgrover1 | 257:7a50601356cc | 661 | } |
| rgrover1 | 257:7a50601356cc | 662 | |
| rgrover1 | 257:7a50601356cc | 663 | inline ble_error_t |
| rgrover1 | 424:370d5f1f292f | 664 | BLEDevice::getAddress(Gap::AddressType_t *typeP, Gap::address_t address) |
| rgrover1 | 257:7a50601356cc | 665 | { |
| rgrover1 | 257:7a50601356cc | 666 | return transport->getGap().getAddress(typeP, address); |
| rgrover1 | 257:7a50601356cc | 667 | } |
| rgrover1 | 257:7a50601356cc | 668 | |
| rgrover1 | 257:7a50601356cc | 669 | inline void |
| rgrover1 | 257:7a50601356cc | 670 | BLEDevice::setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) |
| rgrover1 | 257:7a50601356cc | 671 | { |
| rgrover1 | 257:7a50601356cc | 672 | advParams.setAdvertisingType(advType); |
| rgrover1 | 257:7a50601356cc | 673 | } |
| rgrover1 | 257:7a50601356cc | 674 | |
| rgrover1 | 257:7a50601356cc | 675 | inline void |
| rgrover1 | 257:7a50601356cc | 676 | BLEDevice::setAdvertisingInterval(uint16_t interval) |
| rgrover1 | 257:7a50601356cc | 677 | { |
| rgrover1 | 325:501ad8b8bbe5 | 678 | if (interval == 0) { |
| rgrover1 | 325:501ad8b8bbe5 | 679 | stopAdvertising(); |
| rgrover1 | 325:501ad8b8bbe5 | 680 | } else if (interval < getMinAdvertisingInterval()) { |
| rgrover1 | 325:501ad8b8bbe5 | 681 | interval = getMinAdvertisingInterval(); |
| rgrover1 | 325:501ad8b8bbe5 | 682 | } |
| rgrover1 | 325:501ad8b8bbe5 | 683 | advParams.setInterval(Gap::MSEC_TO_ADVERTISEMENT_DURATION_UNITS(interval)); |
| rgrover1 | 325:501ad8b8bbe5 | 684 | } |
| rgrover1 | 325:501ad8b8bbe5 | 685 | |
| rgrover1 | 325:501ad8b8bbe5 | 686 | inline uint16_t |
| rgrover1 | 325:501ad8b8bbe5 | 687 | BLEDevice::getMinAdvertisingInterval(void) const { |
| rgrover1 | 325:501ad8b8bbe5 | 688 | return transport->getGap().getMinAdvertisingInterval(); |
| rgrover1 | 325:501ad8b8bbe5 | 689 | } |
| rgrover1 | 325:501ad8b8bbe5 | 690 | |
| rgrover1 | 325:501ad8b8bbe5 | 691 | inline uint16_t |
| rgrover1 | 325:501ad8b8bbe5 | 692 | BLEDevice::getMinNonConnectableAdvertisingInterval(void) const { |
| rgrover1 | 325:501ad8b8bbe5 | 693 | return transport->getGap().getMinNonConnectableAdvertisingInterval(); |
| rgrover1 | 325:501ad8b8bbe5 | 694 | } |
| rgrover1 | 325:501ad8b8bbe5 | 695 | |
| rgrover1 | 325:501ad8b8bbe5 | 696 | inline uint16_t |
| rgrover1 | 325:501ad8b8bbe5 | 697 | BLEDevice::getMaxAdvertisingInterval(void) const { |
| rgrover1 | 325:501ad8b8bbe5 | 698 | return transport->getGap().getMaxAdvertisingInterval(); |
| rgrover1 | 257:7a50601356cc | 699 | } |
| rgrover1 | 257:7a50601356cc | 700 | |
| rgrover1 | 257:7a50601356cc | 701 | inline void |
| rgrover1 | 257:7a50601356cc | 702 | BLEDevice::setAdvertisingTimeout(uint16_t timeout) |
| rgrover1 | 257:7a50601356cc | 703 | { |
| rgrover1 | 257:7a50601356cc | 704 | advParams.setTimeout(timeout); |
| rgrover1 | 257:7a50601356cc | 705 | } |
| rgrover1 | 257:7a50601356cc | 706 | |
| rgrover1 | 257:7a50601356cc | 707 | inline void |
| rgrover1 | 257:7a50601356cc | 708 | BLEDevice::setAdvertisingParams(const GapAdvertisingParams &newAdvParams) |
| rgrover1 | 257:7a50601356cc | 709 | { |
| rgrover1 | 257:7a50601356cc | 710 | advParams = newAdvParams; |
| rgrover1 | 257:7a50601356cc | 711 | } |
| rgrover1 | 257:7a50601356cc | 712 | |
| rgrover1 | 410:af8f2d1b67b6 | 713 | inline const GapAdvertisingParams & |
| rgrover1 | 410:af8f2d1b67b6 | 714 | BLEDevice::getAdvertisingParams(void) const |
| rgrover1 | 409:37a4202649dd | 715 | { |
| rgrover1 | 409:37a4202649dd | 716 | return advParams; |
| rgrover1 | 409:37a4202649dd | 717 | } |
| rgrover1 | 409:37a4202649dd | 718 | |
| rgrover1 | 257:7a50601356cc | 719 | inline void |
| rgrover1 | 257:7a50601356cc | 720 | BLEDevice::clearAdvertisingPayload(void) |
| rgrover1 | 257:7a50601356cc | 721 | { |
| rgrover1 | 257:7a50601356cc | 722 | needToSetAdvPayload = true; |
| rgrover1 | 257:7a50601356cc | 723 | advPayload.clear(); |
| rgrover1 | 257:7a50601356cc | 724 | } |
| rgrover1 | 257:7a50601356cc | 725 | |
| rgrover1 | 257:7a50601356cc | 726 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 727 | BLEDevice::accumulateAdvertisingPayload(uint8_t flags) |
| rgrover1 | 257:7a50601356cc | 728 | { |
| rgrover1 | 257:7a50601356cc | 729 | needToSetAdvPayload = true; |
| rgrover1 | 257:7a50601356cc | 730 | return advPayload.addFlags(flags); |
| rgrover1 | 257:7a50601356cc | 731 | } |
| rgrover1 | 257:7a50601356cc | 732 | |
| rgrover1 | 257:7a50601356cc | 733 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 734 | BLEDevice::accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) |
| rgrover1 | 257:7a50601356cc | 735 | { |
| rgrover1 | 257:7a50601356cc | 736 | needToSetAdvPayload = true; |
| rgrover1 | 257:7a50601356cc | 737 | transport->getGap().setAppearance(app); |
| rgrover1 | 257:7a50601356cc | 738 | return advPayload.addAppearance(app); |
| rgrover1 | 257:7a50601356cc | 739 | } |
| rgrover1 | 257:7a50601356cc | 740 | |
| rgrover1 | 257:7a50601356cc | 741 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 742 | BLEDevice::accumulateAdvertisingPayloadTxPower(int8_t txPower) |
| rgrover1 | 257:7a50601356cc | 743 | { |
| rgrover1 | 257:7a50601356cc | 744 | needToSetAdvPayload = true; |
| rgrover1 | 257:7a50601356cc | 745 | return advPayload.addTxPower(txPower); |
| rgrover1 | 257:7a50601356cc | 746 | } |
| rgrover1 | 257:7a50601356cc | 747 | |
| rgrover1 | 257:7a50601356cc | 748 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 749 | BLEDevice::accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) |
| rgrover1 | 257:7a50601356cc | 750 | { |
| rgrover1 | 257:7a50601356cc | 751 | needToSetAdvPayload = true; |
| rgrover1 | 257:7a50601356cc | 752 | if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) { |
| rgrover1 | 257:7a50601356cc | 753 | transport->getGap().setDeviceName(data); |
| rgrover1 | 257:7a50601356cc | 754 | } |
| rgrover1 | 257:7a50601356cc | 755 | return advPayload.addData(type, data, len); |
| rgrover1 | 257:7a50601356cc | 756 | } |
| rgrover1 | 257:7a50601356cc | 757 | |
| rgrover1 | 257:7a50601356cc | 758 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 759 | BLEDevice::accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) |
| rgrover1 | 257:7a50601356cc | 760 | { |
| rgrover1 | 257:7a50601356cc | 761 | needToSetAdvPayload = true; |
| rgrover1 | 257:7a50601356cc | 762 | return scanResponse.addData(type, data, len); |
| rgrover1 | 257:7a50601356cc | 763 | } |
| rgrover1 | 257:7a50601356cc | 764 | |
| rgrover1 | 343:4d2576324b62 | 765 | inline void |
| rgrover1 | 343:4d2576324b62 | 766 | BLEDevice::clearScanResponse(void) |
| rgrover1 | 343:4d2576324b62 | 767 | { |
| rgrover1 | 343:4d2576324b62 | 768 | needToSetAdvPayload = true; |
| rgrover1 | 343:4d2576324b62 | 769 | scanResponse.clear(); |
| rgrover1 | 343:4d2576324b62 | 770 | } |
| rgrover1 | 343:4d2576324b62 | 771 | |
| rgrover1 | 257:7a50601356cc | 772 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 773 | BLEDevice::setAdvertisingPayload(void) { |
| rgrover1 | 257:7a50601356cc | 774 | needToSetAdvPayload = false; |
| rgrover1 | 257:7a50601356cc | 775 | return transport->getGap().setAdvertisingData(advPayload, scanResponse); |
| rgrover1 | 257:7a50601356cc | 776 | } |
| rgrover1 | 257:7a50601356cc | 777 | |
| rgrover1 | 257:7a50601356cc | 778 | inline ble_error_t |
| rgrover1 | 409:37a4202649dd | 779 | BLEDevice::setAdvertisingData(const GapAdvertisingData& newPayload) |
| rgrover1 | 409:37a4202649dd | 780 | { |
| rgrover1 | 409:37a4202649dd | 781 | advPayload = newPayload; |
| rgrover1 | 409:37a4202649dd | 782 | |
| rgrover1 | 409:37a4202649dd | 783 | return setAdvertisingPayload(); |
| rgrover1 | 409:37a4202649dd | 784 | } |
| rgrover1 | 409:37a4202649dd | 785 | |
| rgrover1 | 410:af8f2d1b67b6 | 786 | inline const GapAdvertisingData & |
| rgrover1 | 410:af8f2d1b67b6 | 787 | BLEDevice::getAdvertisingData(void) const { |
| rgrover1 | 409:37a4202649dd | 788 | return advPayload; |
| rgrover1 | 409:37a4202649dd | 789 | } |
| rgrover1 | 409:37a4202649dd | 790 | |
| rgrover1 | 409:37a4202649dd | 791 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 792 | BLEDevice::startAdvertising(void) |
| rgrover1 | 257:7a50601356cc | 793 | { |
| rgrover1 | 257:7a50601356cc | 794 | ble_error_t rc; |
| rgrover1 | 257:7a50601356cc | 795 | if ((rc = transport->getGattServer().initializeGATTDatabase()) != BLE_ERROR_NONE) { |
| rgrover1 | 257:7a50601356cc | 796 | return rc; |
| rgrover1 | 257:7a50601356cc | 797 | } |
| rgrover1 | 257:7a50601356cc | 798 | if (needToSetAdvPayload) { |
| rgrover1 | 257:7a50601356cc | 799 | if ((rc = setAdvertisingPayload()) != BLE_ERROR_NONE) { |
| rgrover1 | 257:7a50601356cc | 800 | return rc; |
| rgrover1 | 257:7a50601356cc | 801 | } |
| rgrover1 | 257:7a50601356cc | 802 | } |
| rgrover1 | 257:7a50601356cc | 803 | |
| rgrover1 | 257:7a50601356cc | 804 | return transport->getGap().startAdvertising(advParams); |
| rgrover1 | 257:7a50601356cc | 805 | } |
| rgrover1 | 257:7a50601356cc | 806 | |
| rgrover1 | 257:7a50601356cc | 807 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 808 | BLEDevice::stopAdvertising(void) |
| rgrover1 | 257:7a50601356cc | 809 | { |
| rgrover1 | 257:7a50601356cc | 810 | return transport->getGap().stopAdvertising(); |
| rgrover1 | 257:7a50601356cc | 811 | } |
| rgrover1 | 257:7a50601356cc | 812 | |
| rgrover1 | 257:7a50601356cc | 813 | inline ble_error_t |
| rgrover1 | 394:598368c24bbb | 814 | BLEDevice::setScanParams(uint16_t interval, uint16_t window, uint16_t timeout, bool activeScanning) { |
| rgrover1 | 384:48412313df56 | 815 | ble_error_t rc; |
| rgrover1 | 384:48412313df56 | 816 | if (((rc = scanningParams.setInterval(interval)) == BLE_ERROR_NONE) && |
| rgrover1 | 384:48412313df56 | 817 | ((rc = scanningParams.setWindow(window)) == BLE_ERROR_NONE) && |
| rgrover1 | 384:48412313df56 | 818 | ((rc = scanningParams.setTimeout(timeout)) == BLE_ERROR_NONE)) { |
| rgrover1 | 394:598368c24bbb | 819 | scanningParams.setActiveScanning(activeScanning); |
| rgrover1 | 384:48412313df56 | 820 | return BLE_ERROR_NONE; |
| rgrover1 | 384:48412313df56 | 821 | } |
| rgrover1 | 384:48412313df56 | 822 | |
| rgrover1 | 384:48412313df56 | 823 | return rc; |
| rgrover1 | 384:48412313df56 | 824 | } |
| rgrover1 | 384:48412313df56 | 825 | |
| rgrover1 | 384:48412313df56 | 826 | inline ble_error_t |
| rgrover1 | 392:3201f029c2eb | 827 | BLEDevice::setScanInterval(uint16_t interval) { |
| rgrover1 | 384:48412313df56 | 828 | return scanningParams.setInterval(interval); |
| rgrover1 | 384:48412313df56 | 829 | } |
| rgrover1 | 384:48412313df56 | 830 | |
| rgrover1 | 384:48412313df56 | 831 | inline ble_error_t |
| rgrover1 | 392:3201f029c2eb | 832 | BLEDevice::setScanWindow(uint16_t window) { |
| rgrover1 | 384:48412313df56 | 833 | return scanningParams.setWindow(window); |
| rgrover1 | 384:48412313df56 | 834 | } |
| rgrover1 | 384:48412313df56 | 835 | |
| rgrover1 | 384:48412313df56 | 836 | inline ble_error_t |
| rgrover1 | 392:3201f029c2eb | 837 | BLEDevice::setScanTimeout(uint16_t timeout) { |
| rgrover1 | 384:48412313df56 | 838 | return scanningParams.setTimeout(timeout); |
| rgrover1 | 384:48412313df56 | 839 | } |
| rgrover1 | 384:48412313df56 | 840 | |
| rgrover1 | 394:598368c24bbb | 841 | inline void |
| rgrover1 | 394:598368c24bbb | 842 | BLEDevice::setActiveScan(bool activeScanning) { |
| rgrover1 | 394:598368c24bbb | 843 | return scanningParams.setActiveScanning(activeScanning); |
| rgrover1 | 394:598368c24bbb | 844 | } |
| rgrover1 | 394:598368c24bbb | 845 | |
| rgrover1 | 384:48412313df56 | 846 | inline ble_error_t |
| rgrover1 | 406:cec6778acc66 | 847 | BLEDevice::startScan(void (*callback)(const Gap::AdvertisementCallbackParams_t *params)) { |
| rgrover1 | 392:3201f029c2eb | 848 | return transport->getGap().startScan(scanningParams, callback); |
| rgrover1 | 385:6e66d1c6de00 | 849 | } |
| rgrover1 | 385:6e66d1c6de00 | 850 | |
| rgrover1 | 407:ca6b956b33d1 | 851 | template<typename T> |
| rgrover1 | 407:ca6b956b33d1 | 852 | inline ble_error_t |
| rgrover1 | 407:ca6b956b33d1 | 853 | BLEDevice::startScan(T *object, void (T::*memberCallback)(const Gap::AdvertisementCallbackParams_t *params)) { |
| rgrover1 | 407:ca6b956b33d1 | 854 | return transport->getGap().startScan(scanningParams, object, memberCallback); |
| rgrover1 | 407:ca6b956b33d1 | 855 | } |
| rgrover1 | 407:ca6b956b33d1 | 856 | |
| rgrover1 | 385:6e66d1c6de00 | 857 | inline ble_error_t |
| rgrover1 | 392:3201f029c2eb | 858 | BLEDevice::stopScan(void) { |
| rgrover1 | 392:3201f029c2eb | 859 | return transport->getGap().stopScan(); |
| rgrover1 | 387:7faa54079669 | 860 | } |
| rgrover1 | 387:7faa54079669 | 861 | |
| rgrover1 | 387:7faa54079669 | 862 | inline ble_error_t |
| rgrover1 | 441:2d864886aeca | 863 | BLEDevice::connect(const Gap::Address_t peerAddr, Gap::AddressType_t peerAddrType) { |
| rgrover1 | 441:2d864886aeca | 864 | return transport->getGap().connect(peerAddr, peerAddrType); |
| rgrover1 | 441:2d864886aeca | 865 | } |
| rgrover1 | 441:2d864886aeca | 866 | |
| rgrover1 | 441:2d864886aeca | 867 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 868 | BLEDevice::disconnect(Gap::DisconnectionReason_t reason) |
| rgrover1 | 257:7a50601356cc | 869 | { |
| rgrover1 | 257:7a50601356cc | 870 | return transport->getGap().disconnect(reason); |
| rgrover1 | 257:7a50601356cc | 871 | } |
| rgrover1 | 257:7a50601356cc | 872 | |
| rgrover1 | 257:7a50601356cc | 873 | inline void |
| rgrover1 | 257:7a50601356cc | 874 | BLEDevice::onTimeout(Gap::EventCallback_t timeoutCallback) |
| rgrover1 | 257:7a50601356cc | 875 | { |
| rgrover1 | 257:7a50601356cc | 876 | transport->getGap().setOnTimeout(timeoutCallback); |
| rgrover1 | 257:7a50601356cc | 877 | } |
| rgrover1 | 257:7a50601356cc | 878 | |
| rgrover1 | 257:7a50601356cc | 879 | inline void |
| rgrover1 | 257:7a50601356cc | 880 | BLEDevice::onConnection(Gap::ConnectionEventCallback_t connectionCallback) |
| rgrover1 | 257:7a50601356cc | 881 | { |
| rgrover1 | 257:7a50601356cc | 882 | transport->getGap().setOnConnection(connectionCallback); |
| rgrover1 | 257:7a50601356cc | 883 | } |
| rgrover1 | 257:7a50601356cc | 884 | |
| rgrover1 | 257:7a50601356cc | 885 | inline void |
| rgrover1 | 257:7a50601356cc | 886 | BLEDevice::onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback) |
| rgrover1 | 257:7a50601356cc | 887 | { |
| rgrover1 | 257:7a50601356cc | 888 | transport->getGap().setOnDisconnection(disconnectionCallback); |
| rgrover1 | 257:7a50601356cc | 889 | } |
| rgrover1 | 257:7a50601356cc | 890 | |
| rgrover1 | 257:7a50601356cc | 891 | template<typename T> |
| rgrover1 | 257:7a50601356cc | 892 | inline void |
| rgrover1 | 257:7a50601356cc | 893 | BLEDevice::addToDisconnectionCallChain(T *tptr, void (T::*mptr)(void)) { |
| rgrover1 | 257:7a50601356cc | 894 | transport->getGap().addToDisconnectionCallChain(tptr, mptr); |
| rgrover1 | 257:7a50601356cc | 895 | } |
| rgrover1 | 257:7a50601356cc | 896 | |
| rgrover1 | 257:7a50601356cc | 897 | inline void |
| rgrover1 | 259:a95264ad705c | 898 | BLEDevice::onDataSent(void (*callback)(unsigned count)) { |
| rgrover1 | 257:7a50601356cc | 899 | transport->getGattServer().setOnDataSent(callback); |
| rgrover1 | 257:7a50601356cc | 900 | } |
| rgrover1 | 257:7a50601356cc | 901 | |
| rgrover1 | 259:a95264ad705c | 902 | template <typename T> inline void |
| rgrover1 | 259:a95264ad705c | 903 | BLEDevice::onDataSent(T *objPtr, void (T::*memberPtr)(unsigned count)) { |
| rgrover1 | 259:a95264ad705c | 904 | transport->getGattServer().setOnDataSent(objPtr, memberPtr); |
| rgrover1 | 259:a95264ad705c | 905 | } |
| rgrover1 | 259:a95264ad705c | 906 | |
| rgrover1 | 257:7a50601356cc | 907 | inline void |
| rgrover1 | 257:7a50601356cc | 908 | BLEDevice::onDataWritten(void (*callback)(const GattCharacteristicWriteCBParams *eventDataP)) { |
| rgrover1 | 257:7a50601356cc | 909 | transport->getGattServer().setOnDataWritten(callback); |
| rgrover1 | 257:7a50601356cc | 910 | } |
| rgrover1 | 257:7a50601356cc | 911 | |
| rgrover1 | 257:7a50601356cc | 912 | template <typename T> inline void |
| rgrover1 | 257:7a50601356cc | 913 | BLEDevice::onDataWritten(T *objPtr, void (T::*memberPtr)(const GattCharacteristicWriteCBParams *context)) { |
| rgrover1 | 257:7a50601356cc | 914 | transport->getGattServer().setOnDataWritten(objPtr, memberPtr); |
| rgrover1 | 257:7a50601356cc | 915 | } |
| rgrover1 | 257:7a50601356cc | 916 | |
| rgrover1 | 300:d9a39f759a6a | 917 | inline ble_error_t |
| rgrover1 | 300:d9a39f759a6a | 918 | BLEDevice::onDataRead(void (*callback)(const GattCharacteristicReadCBParams *eventDataP)) { |
| rgrover1 | 300:d9a39f759a6a | 919 | return transport->getGattServer().setOnDataRead(callback); |
| rgrover1 | 300:d9a39f759a6a | 920 | } |
| rgrover1 | 300:d9a39f759a6a | 921 | |
| rgrover1 | 300:d9a39f759a6a | 922 | template <typename T> inline ble_error_t |
| rgrover1 | 300:d9a39f759a6a | 923 | BLEDevice::onDataRead(T *objPtr, void (T::*memberPtr)(const GattCharacteristicReadCBParams *context)) { |
| rgrover1 | 300:d9a39f759a6a | 924 | return transport->getGattServer().setOnDataRead(objPtr, memberPtr); |
| rgrover1 | 300:d9a39f759a6a | 925 | } |
| rgrover1 | 300:d9a39f759a6a | 926 | |
| rgrover1 | 257:7a50601356cc | 927 | inline void |
| rgrover1 | 257:7a50601356cc | 928 | BLEDevice::onUpdatesEnabled(GattServer::EventCallback_t callback) |
| rgrover1 | 257:7a50601356cc | 929 | { |
| rgrover1 | 257:7a50601356cc | 930 | transport->getGattServer().setOnUpdatesEnabled(callback); |
| rgrover1 | 257:7a50601356cc | 931 | } |
| rgrover1 | 257:7a50601356cc | 932 | |
| rgrover1 | 257:7a50601356cc | 933 | inline void |
| rgrover1 | 257:7a50601356cc | 934 | BLEDevice::onUpdatesDisabled(GattServer::EventCallback_t callback) |
| rgrover1 | 257:7a50601356cc | 935 | { |
| rgrover1 | 257:7a50601356cc | 936 | transport->getGattServer().setOnUpdatesDisabled(callback); |
| rgrover1 | 257:7a50601356cc | 937 | } |
| rgrover1 | 257:7a50601356cc | 938 | |
| rgrover1 | 257:7a50601356cc | 939 | inline void |
| rgrover1 | 257:7a50601356cc | 940 | BLEDevice::onConfirmationReceived(GattServer::EventCallback_t callback) |
| rgrover1 | 257:7a50601356cc | 941 | { |
| rgrover1 | 257:7a50601356cc | 942 | transport->getGattServer().setOnConfirmationReceived(callback); |
| rgrover1 | 257:7a50601356cc | 943 | } |
| rgrover1 | 257:7a50601356cc | 944 | |
| rgrover1 | 341:8a104d9d80c1 | 945 | inline void |
| rgrover1 | 341:8a104d9d80c1 | 946 | BLEDevice::onRadioNotification(Gap::RadioNotificationEventCallback_t callback) |
| rgrover1 | 341:8a104d9d80c1 | 947 | { |
| rgrover1 | 341:8a104d9d80c1 | 948 | transport->getGap().setOnRadioNotification(callback); |
| rgrover1 | 341:8a104d9d80c1 | 949 | } |
| rgrover1 | 341:8a104d9d80c1 | 950 | |
| rgrover1 | 353:5ed63cda3038 | 951 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 952 | BLEDevice::addService(GattService &service) |
| rgrover1 | 257:7a50601356cc | 953 | { |
| rgrover1 | 257:7a50601356cc | 954 | return transport->getGattServer().addService(service); |
| rgrover1 | 257:7a50601356cc | 955 | } |
| rgrover1 | 257:7a50601356cc | 956 | |
| rgrover1 | 257:7a50601356cc | 957 | inline Gap::GapState_t |
| rgrover1 | 257:7a50601356cc | 958 | BLEDevice::getGapState(void) const |
| rgrover1 | 257:7a50601356cc | 959 | { |
| rgrover1 | 257:7a50601356cc | 960 | return transport->getGap().getState(); |
| rgrover1 | 257:7a50601356cc | 961 | } |
| rgrover1 | 257:7a50601356cc | 962 | |
| rgrover1 | 328:1fd12f67ed7a | 963 | inline ble_error_t BLEDevice::readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) |
| rgrover1 | 257:7a50601356cc | 964 | { |
| rgrover1 | 328:1fd12f67ed7a | 965 | return transport->getGattServer().readValue(attributeHandle, buffer, lengthP); |
| rgrover1 | 257:7a50601356cc | 966 | } |
| rgrover1 | 257:7a50601356cc | 967 | |
| rgrover1 | 342:152bd9c825d6 | 968 | inline ble_error_t BLEDevice::readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) |
| rgrover1 | 342:152bd9c825d6 | 969 | { |
| rgrover1 | 342:152bd9c825d6 | 970 | return transport->getGattServer().readValue(connectionHandle, attributeHandle, buffer, lengthP); |
| rgrover1 | 342:152bd9c825d6 | 971 | } |
| rgrover1 | 342:152bd9c825d6 | 972 | |
| rgrover1 | 257:7a50601356cc | 973 | inline ble_error_t |
| rgrover1 | 328:1fd12f67ed7a | 974 | BLEDevice::updateCharacteristicValue(GattAttribute::Handle_t attributeHandle, const uint8_t *value, uint16_t size, bool localOnly) |
| rgrover1 | 257:7a50601356cc | 975 | { |
| rgrover1 | 328:1fd12f67ed7a | 976 | return transport->getGattServer().updateValue(attributeHandle, const_cast<uint8_t *>(value), size, localOnly); |
| rgrover1 | 257:7a50601356cc | 977 | } |
| rgrover1 | 257:7a50601356cc | 978 | |
| rgrover1 | 342:152bd9c825d6 | 979 | inline ble_error_t |
| rgrover1 | 342:152bd9c825d6 | 980 | BLEDevice::updateCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, const uint8_t *value, uint16_t size, bool localOnly) |
| rgrover1 | 342:152bd9c825d6 | 981 | { |
| rgrover1 | 342:152bd9c825d6 | 982 | return transport->getGattServer().updateValue(connectionHandle, attributeHandle, const_cast<uint8_t *>(value), size, localOnly); |
| rgrover1 | 342:152bd9c825d6 | 983 | } |
| rgrover1 | 342:152bd9c825d6 | 984 | |
| rgrover1 | 257:7a50601356cc | 985 | inline void |
| rgrover1 | 257:7a50601356cc | 986 | BLEDevice::waitForEvent(void) |
| rgrover1 | 257:7a50601356cc | 987 | { |
| rgrover1 | 257:7a50601356cc | 988 | transport->waitForEvent(); |
| rgrover1 | 257:7a50601356cc | 989 | } |
| rgrover1 | 257:7a50601356cc | 990 | |
| rgrover1 | 257:7a50601356cc | 991 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 992 | BLEDevice::getPreferredConnectionParams(Gap::ConnectionParams_t *params) |
| rgrover1 | 257:7a50601356cc | 993 | { |
| rgrover1 | 257:7a50601356cc | 994 | return transport->getGap().getPreferredConnectionParams(params); |
| rgrover1 | 257:7a50601356cc | 995 | } |
| rgrover1 | 257:7a50601356cc | 996 | |
| rgrover1 | 257:7a50601356cc | 997 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 998 | BLEDevice::setPreferredConnectionParams(const Gap::ConnectionParams_t *params) |
| rgrover1 | 257:7a50601356cc | 999 | { |
| rgrover1 | 257:7a50601356cc | 1000 | return transport->getGap().setPreferredConnectionParams(params); |
| rgrover1 | 257:7a50601356cc | 1001 | } |
| rgrover1 | 257:7a50601356cc | 1002 | |
| rgrover1 | 257:7a50601356cc | 1003 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 1004 | BLEDevice::updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) { |
| rgrover1 | 257:7a50601356cc | 1005 | return transport->getGap().updateConnectionParams(handle, params); |
| rgrover1 | 257:7a50601356cc | 1006 | } |
| rgrover1 | 257:7a50601356cc | 1007 | |
| rgrover1 | 257:7a50601356cc | 1008 | inline const char * |
| rgrover1 | 257:7a50601356cc | 1009 | BLEDevice::getVersion(void) |
| rgrover1 | 257:7a50601356cc | 1010 | { |
| rgrover1 | 257:7a50601356cc | 1011 | return transport->getVersion(); |
| rgrover1 | 257:7a50601356cc | 1012 | } |
| rgrover1 | 257:7a50601356cc | 1013 | |
| rgrover1 | 257:7a50601356cc | 1014 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 1015 | BLEDevice::setDeviceName(const uint8_t *deviceName) |
| rgrover1 | 257:7a50601356cc | 1016 | { |
| rgrover1 | 257:7a50601356cc | 1017 | return transport->getGap().setDeviceName(deviceName); |
| rgrover1 | 257:7a50601356cc | 1018 | } |
| rgrover1 | 257:7a50601356cc | 1019 | |
| rgrover1 | 257:7a50601356cc | 1020 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 1021 | BLEDevice::getDeviceName(uint8_t *deviceName, unsigned *lengthP) |
| rgrover1 | 257:7a50601356cc | 1022 | { |
| rgrover1 | 257:7a50601356cc | 1023 | return transport->getGap().getDeviceName(deviceName, lengthP); |
| rgrover1 | 257:7a50601356cc | 1024 | } |
| rgrover1 | 257:7a50601356cc | 1025 | |
| rgrover1 | 257:7a50601356cc | 1026 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 1027 | BLEDevice::setAppearance(uint16_t appearance) |
| rgrover1 | 257:7a50601356cc | 1028 | { |
| rgrover1 | 257:7a50601356cc | 1029 | return transport->getGap().setAppearance(appearance); |
| rgrover1 | 257:7a50601356cc | 1030 | } |
| rgrover1 | 257:7a50601356cc | 1031 | |
| rgrover1 | 257:7a50601356cc | 1032 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 1033 | BLEDevice::getAppearance(uint16_t *appearanceP) |
| rgrover1 | 257:7a50601356cc | 1034 | { |
| rgrover1 | 257:7a50601356cc | 1035 | return transport->getGap().getAppearance(appearanceP); |
| rgrover1 | 257:7a50601356cc | 1036 | } |
| rgrover1 | 257:7a50601356cc | 1037 | |
| rgrover1 | 257:7a50601356cc | 1038 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 1039 | BLEDevice::setTxPower(int8_t txPower) |
| rgrover1 | 257:7a50601356cc | 1040 | { |
| rgrover1 | 257:7a50601356cc | 1041 | return transport->setTxPower(txPower); |
| rgrover1 | 257:7a50601356cc | 1042 | } |
| rgrover1 | 257:7a50601356cc | 1043 | |
| rgrover1 | 305:71367f7cd078 | 1044 | inline void |
| rgrover1 | 305:71367f7cd078 | 1045 | BLEDevice::getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) |
| rgrover1 | 305:71367f7cd078 | 1046 | { |
| rgrover1 | 305:71367f7cd078 | 1047 | transport->getPermittedTxPowerValues(valueArrayPP, countP); |
| rgrover1 | 305:71367f7cd078 | 1048 | } |
| rgrover1 | 305:71367f7cd078 | 1049 | |
| rgrover1 | 347:20be4234c6fe | 1050 | inline ble_error_t |
| rgrover1 | 357:d4bb5d2b837a | 1051 | BLEDevice::initializeSecurity(bool enableBonding, |
| rgrover1 | 357:d4bb5d2b837a | 1052 | bool requireMITM, |
| rgrover1 | 357:d4bb5d2b837a | 1053 | Gap::SecurityIOCapabilities_t iocaps, |
| rgrover1 | 357:d4bb5d2b837a | 1054 | const Gap::Passkey_t passkey) |
| rgrover1 | 347:20be4234c6fe | 1055 | { |
| rgrover1 | 357:d4bb5d2b837a | 1056 | return transport->initializeSecurity(enableBonding, requireMITM, iocaps, passkey); |
| rgrover1 | 347:20be4234c6fe | 1057 | } |
| rgrover1 | 347:20be4234c6fe | 1058 | |
| rgrover1 | 369:9a76cc068644 | 1059 | inline void |
| rgrover1 | 370:678fdba95a62 | 1060 | BLEDevice::onSecuritySetupInitiated(Gap::SecuritySetupInitiatedCallback_t callback) |
| rgrover1 | 370:678fdba95a62 | 1061 | { |
| rgrover1 | 370:678fdba95a62 | 1062 | transport->getGap().setOnSecuritySetupInitiated(callback); |
| rgrover1 | 370:678fdba95a62 | 1063 | } |
| rgrover1 | 370:678fdba95a62 | 1064 | |
| rgrover1 | 370:678fdba95a62 | 1065 | inline void |
| rgrover1 | 370:678fdba95a62 | 1066 | BLEDevice::onSecuritySetupCompleted(Gap::SecuritySetupCompletedCallback_t callback) |
| rgrover1 | 370:678fdba95a62 | 1067 | { |
| rgrover1 | 370:678fdba95a62 | 1068 | transport->getGap().setOnSecuritySetupCompleted(callback); |
| rgrover1 | 370:678fdba95a62 | 1069 | } |
| rgrover1 | 370:678fdba95a62 | 1070 | |
| rgrover1 | 370:678fdba95a62 | 1071 | inline void |
| rgrover1 | 370:678fdba95a62 | 1072 | BLEDevice::onLinkSecured(Gap::LinkSecuredCallback_t callback) |
| rgrover1 | 370:678fdba95a62 | 1073 | { |
| rgrover1 | 370:678fdba95a62 | 1074 | transport->getGap().setOnLinkSecured(callback); |
| rgrover1 | 370:678fdba95a62 | 1075 | } |
| rgrover1 | 370:678fdba95a62 | 1076 | |
| rgrover1 | 370:678fdba95a62 | 1077 | inline void |
| rgrover1 | 370:678fdba95a62 | 1078 | BLEDevice::onSecurityContextStored(Gap::HandleSpecificEvent_t callback) |
| rgrover1 | 370:678fdba95a62 | 1079 | { |
| rgrover1 | 370:678fdba95a62 | 1080 | transport->getGap().setOnSecurityContextStored(callback); |
| rgrover1 | 370:678fdba95a62 | 1081 | } |
| rgrover1 | 370:678fdba95a62 | 1082 | |
| rgrover1 | 370:678fdba95a62 | 1083 | inline void |
| rgrover1 | 369:9a76cc068644 | 1084 | BLEDevice::onPasskeyDisplay(Gap::PasskeyDisplayCallback_t callback) |
| rgrover1 | 369:9a76cc068644 | 1085 | { |
| rgrover1 | 369:9a76cc068644 | 1086 | return transport->getGap().setOnPasskeyDisplay(callback); |
| rgrover1 | 369:9a76cc068644 | 1087 | } |
| rgrover1 | 369:9a76cc068644 | 1088 | |
| rgrover1 | 370:678fdba95a62 | 1089 | inline ble_error_t |
| rgrover1 | 370:678fdba95a62 | 1090 | BLEDevice::getLinkSecurity(Gap::Handle_t connectionHandle, Gap::LinkSecurityStatus_t *securityStatusP) |
| rgrover1 | 370:678fdba95a62 | 1091 | { |
| rgrover1 | 370:678fdba95a62 | 1092 | return transport->getGap().getLinkSecurity(connectionHandle, securityStatusP); |
| rgrover1 | 370:678fdba95a62 | 1093 | } |
| rgrover1 | 370:678fdba95a62 | 1094 | |
| rgrover1 | 371:6c73b5970f2d | 1095 | inline ble_error_t |
| rgrover1 | 371:6c73b5970f2d | 1096 | BLEDevice::purgeAllBondingState(void) |
| rgrover1 | 371:6c73b5970f2d | 1097 | { |
| rgrover1 | 371:6c73b5970f2d | 1098 | return transport->getGap().purgeAllBondingState(); |
| rgrover1 | 371:6c73b5970f2d | 1099 | } |
| rgrover1 | 371:6c73b5970f2d | 1100 | |
| rgrover1 | 257:7a50601356cc | 1101 | #endif // ifndef __BLE_DEVICE__ |