Diff: components.cpp

Revision:

8:582ac4c5a524

Parent:

7:dd303488e55d

Child:

9:e27b3f34de24

diff -r dd303488e55d -r 582ac4c5a524 components.cpp
--- a/components.cpp	Sun Jan 07 21:29:12 2018 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,184 +0,0 @@
-#include "mbed.h"
-#include "components.hpp"
-#include "lglcd.h"
-#include "stdio.h"
-#define RED_DONE 1
-#define YELLOW_DONE 2
-//Digital outputs
-DigitalIn onBoardSwitch(USER_BUTTON);
-DigitalOut onBoardLED(LED1);
-DigitalOut redLED(PE_15);
-DigitalOut yellowLED(PB_10);
-DigitalOut greenLED(PB_11);
-SDBlockDevice sd(PB_5, D12, D13, D10);// miso, sclk, cs 
-Mutex Lock1;
-Mutex Lock2;
-Mutex Remove;
-//Inputs
-
-DigitalIn  SW1(PE_12);
-DigitalIn  SW2(PE_14);
-//Serial pc(USBTX, USBRX);
-AnalogIn adcIn(PA_0);
-
-//Environmental Sensor driver
-#ifdef BME
-BME280 sensor(D14, D15);
-#else
-BMP280 sensor(D14, D15);
-#endif
-lglcd mylcd(D7,D6,D5,D4,D3,D2);
-
-//POWER ON SELF TEST
-void post() 
-{
-    //posttest 
-}
-void runanalysis(void){
-    while(1){     
-Lock1.lock();
-double temp = sensor.getTemperature();
-double pressure = sensor.getPressure();
-double lightin = adcIn;
-char TEM[6];
-char PRE[5];  
-char LIGHT[6];
-printf("REFRESH SENSORS\n\r");
-sprintf(TEM,"%.2f", temp);
-sprintf(PRE,"%.2f", pressure);
-sprintf(LIGHT,"%.2f", lightin);
-mylcd.setline(1,1);
-mylcd.write("L:");
-if(lightin > 0.7 && lightin < 0.9)
-{
-mylcd.setline(1,4);
- mylcd.write("|||||||||MAX");    
-}
-else if(lightin > 0.55 && lightin < 0.69)
-{
-mylcd.setline(1,4);
- mylcd.write("|||||||     ");
-}
-else if(lightin > 0.5 && lightin < 0.54)
-{
-mylcd.setline(1,4);
- mylcd.write("|||||       ");
-}
-else if(lightin > 0.4 && lightin < 0.54)
-{
-mylcd.setline(1,4);
- mylcd.write("|||         ");
-}
-else if(lightin > 0.3 && lightin < 0.39)
-{
-mylcd.setline(1,4);
- mylcd.write("||          ");
-} 
-else if(lightin > 0.06 && lightin < 0.29)
-{
-mylcd.setline(1,4);
- mylcd.write("LOW LIGHT    ");
-} 
-else if(lightin < 0.05)
-{
-mylcd.setline(1,4);
-mylcd.write("             ");
-mylcd.setline(1,4);
-mylcd.write("disconnected");
-}
-mylcd.setline(2,1);
-mylcd.write("P:");
-mylcd.write(PRE);
-mylcd.setline(2,10);
-mylcd.write("T:");
-mylcd.write(TEM);
-wait(0.01);
-Lock1.unlock();
-Thread::signal_wait(SIG_READY);
-}
-}
-void sdwrite(void)
-{
-    while(1)
-    {
-        Lock2.lock();
-        FATFileSystem fs("sd", &sd);
-FILE* fp = fopen("/sd/test.csv","a");
-    if (fp == NULL) {
-        errorCode(FATAL);
-        printf("SD FAIL\n\r");
-        mylcd.clear();
-        mylcd.setline(1,0);
-        mylcd.write("SD FAIL");
-    }
-    if (fp != NULL){
-    printf("SD Success\n\r");
-    fprintf(fp, "hello,hello,hello\n\r");
-    wait(0.01);
-    }
-      fclose(fp);      
-      Lock2.unlock(); 
-      Thread::signal_wait(SIG_READY2);   
-
-}
-}
-void sdrun(void)
-{
-if ( sd.init() != 0) {
-printf("Init failed \n");
-mylcd.clear();
-mylcd.setline(1,1);
-mylcd.write("CANNOT INIT SD");        
-errorCode(FATAL);
-}
-if( sd.init() == 0){
-printf("Init Success \n");
-mylcd.clear();
-mylcd.setline(1,1);
-mylcd.write("SD GOOD MAN");
-wait(0.5); //flash the SD error / good code! 
-}
-}
-void sdcheck(void){
-if ( sd.init() != 0) {
-printf("Init failed \n\r");
-mylcd.clear();
-mylcd.setline(1,1);
-mylcd.write("CANNOT INIT SD\n\r");        
-errorCode(FATAL);
-}
-if( sd.init() == 0){
-printf("SD Good\n\r");
-}
-}
-void sdremove(void)
-{
-    Thread::signal_wait(SIG_REMOVE); 
-    mylcd.clear();  
-    Remove.lock();
-                sd.deinit();
-                mylcd.clear();
-                mylcd.setline(1,0);
-                greenLED = 1;
-                mylcd.write("R");
-                printf("SD REMOVED");
-                errorCode(FATAL);
-    Remove.unlock();
-}
-void errorCode(ELEC350_ERROR_CODE err)
-{
-    switch (err) {
-      case OK:
-        greenLED = 1;
-        wait(1.0);
-        greenLED = 0;
-        return;                
-      case FATAL:
-        while(1) {
-            redLED = 1;
-            wait(0.1);
-            redLED = 0;
-            wait(0.1);                
-        }
-    };
-}
\ No newline at end of file