Igor Levkov
/
BLE_API
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Dependents: BLE_PowerBank_HeyFaradey
Fork of
BLE_API
by 
Bluetooth Low Energy
Diff: ble/Gap.h
- Revision:
- 1131:692ddf04fc42
- Parent:
- 1124:7ffed715734a
- Child:
- 1132:6362b7c2fdff
diff -r ff83f0020480 -r 692ddf04fc42 ble/Gap.h
--- a/ble/Gap.h Tue Jan 12 19:47:52 2016 +0000
+++ b/ble/Gap.h Wed Apr 06 19:13:46 2016 +0100
@@ -1,1400 +1,1070 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef __GAP_H__
-#define __GAP_H__
-
-#include "ble/BLEProtocol.h"
-#include "GapAdvertisingData.h"
-#include "GapAdvertisingParams.h"
-#include "GapScanningParams.h"
-#include "GapEvents.h"
-#include "CallChainOfFunctionPointersWithContext.h"
-#include "FunctionPointerWithContext.h"
-#include "deprecate.h"
-
-/* Forward declarations for classes that will only be used for pointers or references in the following. */
-class GapAdvertisingParams;
-class GapScanningParams;
-class GapAdvertisingData;
-
-class Gap {
- /*
- * DEPRECATION ALERT: all of the APIs in this `public` block are deprecated.
- * They have been relocated to the class BLEProtocol.
- */
-public:
- /**
- * Address-type for BLEProtocol addresses.
- *
- * @note: deprecated. Use BLEProtocol::AddressType_t instead.
- */
- typedef BLEProtocol::AddressType_t AddressType_t;
-
- /**
- * Address-type for BLEProtocol addresses.
- * @note: deprecated. Use BLEProtocol::AddressType_t instead.
- */
- typedef BLEProtocol::AddressType_t addr_type_t;
-
- /**
- * Address-type for BLEProtocol addresses.
- * \deprecated: Use BLEProtocol::AddressType_t instead.
- *
- * DEPRECATION ALERT: The following constants have been left in their
- * deprecated state to transparenly support existing applications which may
- * have used Gap::ADDR_TYPE_*.
- */
- enum DeprecatedAddressType_t {
- ADDR_TYPE_PUBLIC = BLEProtocol::AddressType::PUBLIC,
- ADDR_TYPE_RANDOM_STATIC = BLEProtocol::AddressType::RANDOM_STATIC,
- ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE = BLEProtocol::AddressType::RANDOM_PRIVATE_RESOLVABLE,
- ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE = BLEProtocol::AddressType::RANDOM_PRIVATE_NON_RESOLVABLE
- };
-
- static const unsigned ADDR_LEN = BLEProtocol::ADDR_LEN; /**< Length (in octets) of the BLE MAC address. */
- typedef BLEProtocol::AddressBytes_t Address_t; /**< 48-bit address, LSB format. @Note: Deprecated. Use BLEProtocol::AddressBytes_t instead. */
- typedef BLEProtocol::AddressBytes_t address_t; /**< 48-bit address, LSB format. @Note: Deprecated. Use BLEProtocol::AddressBytes_t instead. */
-
-public:
- enum TimeoutSource_t {
- TIMEOUT_SRC_ADVERTISING = 0x00, /**< Advertising timeout. */
- TIMEOUT_SRC_SECURITY_REQUEST = 0x01, /**< Security request timeout. */
- TIMEOUT_SRC_SCAN = 0x02, /**< Scanning timeout. */
- TIMEOUT_SRC_CONN = 0x03, /**< Connection timeout. */
- };
-
- /**
- * Enumeration for disconnection reasons. The values for these reasons are
- * derived from Nordic's implementation, but the reasons are meant to be
- * independent of the transport. If you are returned a reason that is not
- * covered by this enumeration, please refer to the underlying
- * transport library.
- */
- enum DisconnectionReason_t {
- CONNECTION_TIMEOUT = 0x08,
- REMOTE_USER_TERMINATED_CONNECTION = 0x13,
- REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES = 0x14, /**< Remote device terminated connection due to low resources.*/
- REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF = 0x15, /**< Remote device terminated connection due to power off. */
- LOCAL_HOST_TERMINATED_CONNECTION = 0x16,
- CONN_INTERVAL_UNACCEPTABLE = 0x3B,
- };
-
- /**
- * Enumeration for whitelist advertising policy filter modes. The possible
- * filter modes were obtained from the Bluetooth Core Specification
- * 4.2 (Vol. 6), Part B, Section 4.3.2.
- *
- * @experimental
- */
- enum AdvertisingPolicyMode_t {
- ADV_POLICY_IGNORE_WHITELIST = 0,
- ADV_POLICY_FILTER_SCAN_REQS = 1,
- ADV_POLICY_FILTER_CONN_REQS = 2,
- ADV_POLICY_FILTER_ALL_REQS = 3,
- };
-
- /**
- * Enumeration for whitelist scanning policy filter modes. The possible
- * filter modes were obtained from the Bluetooth Core Specification
- * 4.2 (Vol. 6), Part B, Section 4.3.3.
- *
- * @experimental
- */
- enum ScanningPolicyMode_t {
- SCAN_POLICY_IGNORE_WHITELIST = 0,
- SCAN_POLICY_FILTER_ALL_ADV = 1,
- };
-
- /**
- * Enumeration for the whitelist initiator policy fiter modes. The possible
- * filter modes were obtained from the Bluetooth Core Specification
- * 4.2 (vol. 6), Part B, Section 4.4.4.
- *
- * @experimental
- */
- enum InitiatorPolicyMode_t {
- INIT_POLICY_IGNORE_WHITELIST = 0,
- INIT_POLICY_FILTER_ALL_ADV = 1,
- };
-
- /**
- * Representation of a Bluetooth Low Enery Whitelist containing addresses.
- *
- * @experimental
- */
- struct Whitelist_t {
- BLEProtocol::Address_t *addresses;
- uint8_t size;
- uint8_t capacity;
- };
-
-
- /* Describes the current state of the device (more than one bit can be set). */
- struct GapState_t {
- unsigned advertising : 1; /**< Peripheral is currently advertising. */
- unsigned connected : 1; /**< Peripheral is connected to a central. */
- };
-
- typedef uint16_t Handle_t; /* Type for connection handle. */
-
- typedef struct {
- uint16_t minConnectionInterval; /**< Minimum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
- uint16_t maxConnectionInterval; /**< Maximum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
- uint16_t slaveLatency; /**< Slave Latency in number of connection events, see @ref BLE_GAP_CP_LIMITS.*/
- uint16_t connectionSupervisionTimeout; /**< Connection Supervision Timeout in 10 ms units, see @ref BLE_GAP_CP_LIMITS.*/
- } ConnectionParams_t;
-
- enum Role_t {
- PERIPHERAL = 0x1, /**< Peripheral Role. */
- CENTRAL = 0x2, /**< Central Role. */
- };
-
- struct AdvertisementCallbackParams_t {
- BLEProtocol::AddressBytes_t peerAddr;
- int8_t rssi;
- bool isScanResponse;
- GapAdvertisingParams::AdvertisingType_t type;
- uint8_t advertisingDataLen;
- const uint8_t *advertisingData;
- };
- typedef FunctionPointerWithContext<const AdvertisementCallbackParams_t *> AdvertisementReportCallback_t;
-
- struct ConnectionCallbackParams_t {
- Handle_t handle;
- Role_t role;
- BLEProtocol::AddressType_t peerAddrType;
- BLEProtocol::AddressBytes_t peerAddr;
- BLEProtocol::AddressType_t ownAddrType;
- BLEProtocol::AddressBytes_t ownAddr;
- const ConnectionParams_t *connectionParams;
-
- ConnectionCallbackParams_t(Handle_t handleIn,
- Role_t roleIn,
- BLEProtocol::AddressType_t peerAddrTypeIn,
- const uint8_t *peerAddrIn,
- BLEProtocol::AddressType_t ownAddrTypeIn,
- const uint8_t *ownAddrIn,
- const ConnectionParams_t *connectionParamsIn) :
- handle(handleIn),
- role(roleIn),
- peerAddrType(peerAddrTypeIn),
- peerAddr(),
- ownAddrType(ownAddrTypeIn),
- ownAddr(),
- connectionParams(connectionParamsIn) {
- memcpy(peerAddr, peerAddrIn, ADDR_LEN);
- memcpy(ownAddr, ownAddrIn, ADDR_LEN);
- }
- };
-
- struct DisconnectionCallbackParams_t {
- Handle_t handle;
- DisconnectionReason_t reason;
-
- DisconnectionCallbackParams_t(Handle_t handleIn,
- DisconnectionReason_t reasonIn) :
- handle(handleIn),
- reason(reasonIn)
- {}
- };
-
- static const uint16_t UNIT_1_25_MS = 1250; /**< Number of microseconds in 1.25 milliseconds. */
- static uint16_t MSEC_TO_GAP_DURATION_UNITS(uint32_t durationInMillis) {
- return (durationInMillis * 1000) / UNIT_1_25_MS;
- }
-
- typedef FunctionPointerWithContext<TimeoutSource_t> TimeoutEventCallback_t;
- typedef CallChainOfFunctionPointersWithContext<TimeoutSource_t> TimeoutEventCallbackChain_t;
-
- typedef FunctionPointerWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallback_t;
- typedef CallChainOfFunctionPointersWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallbackChain_t;
-
- typedef FunctionPointerWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallback_t;
- typedef CallChainOfFunctionPointersWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallbackChain_t;
-
- typedef FunctionPointerWithContext<bool> RadioNotificationEventCallback_t;
-
- typedef FunctionPointerWithContext<const Gap *> GapShutdownCallback_t;
- typedef CallChainOfFunctionPointersWithContext<const Gap *> GapShutdownCallbackChain_t;
-
- /*
- * The following functions are meant to be overridden in the platform-specific sub-class.
- */
-public:
- /**
- * Set the BTLE MAC address and type. Please note that the address format is
- * least significant byte first (LSB). Please refer to BLEProtocol::AddressBytes_t.
- *
- * @return BLE_ERROR_NONE on success.
- */
- virtual ble_error_t setAddress(BLEProtocol::AddressType_t type, const BLEProtocol::AddressBytes_t address) {
- /* avoid compiler warnings about unused variables */
- (void)type;
- (void)address;
-
- return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
- }
-
- /**
- * Fetch the BTLE MAC address and type.
- *
- * @return BLE_ERROR_NONE on success.
- */
- virtual ble_error_t getAddress(BLEProtocol::AddressType_t *typeP, BLEProtocol::AddressBytes_t address) {
- /* Avoid compiler warnings about unused variables. */
- (void)typeP;
- (void)address;
-
- return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
- }
-
- /**
- * @return Minimum Advertising interval in milliseconds for connectable
- * undirected and connectable directed event types.
- */
- virtual uint16_t getMinAdvertisingInterval(void) const {
- return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
- }
-
- /**
- * @return Minimum Advertising interval in milliseconds for scannable
- * undirected and non-connectable undirected event types.
- */
- virtual uint16_t getMinNonConnectableAdvertisingInterval(void) const {
- return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
- }
-
- /**
- * @return Maximum Advertising interval in milliseconds.
- */
- virtual uint16_t getMaxAdvertisingInterval(void) const {
- return 0xFFFF; /* Requesting action from porter(s): override this API if this capability is supported. */
- }
-
- virtual ble_error_t stopAdvertising(void) {
- return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
- }
-
- /**
- * Stop scanning. The current scanning parameters remain in effect.
- *
- * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
- */
- virtual ble_error_t stopScan() {
- return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
- }
-
- /**
- * Create a connection (GAP Link Establishment).
- *
- * @param peerAddr
- * 48-bit address, LSB format.
- * @param peerAddrType
- * Address type of the peer.
- * @param connectionParams
- * Connection parameters.
- * @param scanParams
- * Paramters to be used while scanning for the peer.
- * @return BLE_ERROR_NONE if connection establishment procedure is started
- * successfully. The connectionCallChain (if set) will be invoked upon
- * a connection event.
- */
- virtual ble_error_t connect(const BLEProtocol::AddressBytes_t peerAddr,
- BLEProtocol::AddressType_t peerAddrType,
- const ConnectionParams_t *connectionParams,
- const GapScanningParams *scanParams) {
- /* Avoid compiler warnings about unused variables. */
- (void)peerAddr;
- (void)peerAddrType;
- (void)connectionParams;
- (void)scanParams;
-
- return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
- }
-
- /**
- * Create a connection (GAP Link Establishment).
- *
- * \deprecated: This funtion overloads Gap::connect(const BLEProtocol::Address_t peerAddr,
- BLEProtocol::AddressType_t peerAddrType,
- const ConnectionParams_t *connectionParams,
- const GapScanningParams *scanParams)
- * to maintain backward compatibility for change from Gap::AddressType_t to BLEProtocol::AddressType_t
- */
- ble_error_t connect(const BLEProtocol::AddressBytes_t peerAddr,
- DeprecatedAddressType_t peerAddrType,
- const ConnectionParams_t *connectionParams,
- const GapScanningParams *scanParams)
- __deprecated_message("Gap::DeprecatedAddressType_t is deprecated, use BLEProtocol::AddressType_t instead") {
- return connect(peerAddr, (BLEProtocol::AddressType_t) peerAddrType, connectionParams, scanParams);
- }
-
- /**
- * This call initiates the disconnection procedure, and its completion will
- * be communicated to the application with an invocation of the
- * disconnectionCallback.
- *
- * @param reason
- * The reason for disconnection; to be sent back to the peer.
- */
- virtual ble_error_t disconnect(Handle_t connectionHandle, DisconnectionReason_t reason) {
- /* avoid compiler warnings about unused variables */
- (void)connectionHandle;
- (void)reason;
-
- return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
- }
-
- /**
- * This call initiates the disconnection procedure, and its completion will
- * be communicated to the application with an invocation of the
- * disconnectionCallback.
- *
- * @param reason
- * The reason for disconnection; to be sent back to the peer.
- *
- * @note: This version of disconnect() doesn't take a connection handle. It
- * works reliably only for stacks that are limited to a single
- * connection. This API should be considered *deprecated* in favour of the
- * alternative, which takes a connection handle. It will be dropped in the future.
- */
- virtual ble_error_t disconnect(DisconnectionReason_t reason) {
- /* Avoid compiler warnings about unused variables. */
- (void)reason;
-
- return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
- }
-
- /**
- * Get the GAP peripheral preferred connection parameters. These are the
- * defaults that the peripheral would like to have in a connection. The
- * choice of the connection parameters is eventually up to the central.
- *
- * @param[out] params
- * The structure where the parameters will be stored. Memory
- * for this is owned by the caller.
- *
- * @return BLE_ERROR_NONE if the parameters were successfully filled into
- * the given structure pointed to by params.
- */
- virtual ble_error_t getPreferredConnectionParams(ConnectionParams_t *params) {
- /* Avoid compiler warnings about unused variables. */
- (void)params;
-
- return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
- }
-
- /**
- * Set the GAP peripheral preferred connection parameters. These are the
- * defaults that the peripheral would like to have in a connection. The
- * choice of the connection parameters is eventually up to the central.
- *
- * @param[in] params
- * The structure containing the desired parameters.
- */
- virtual ble_error_t setPreferredConnectionParams(const ConnectionParams_t *params) {
- /* Avoid compiler warnings about unused variables. */
- (void)params;
-
- return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
- }
-
- /**
- * Update connection parameters.
- * In the central role this will initiate a Link Layer connection parameter update procedure.
- * In the peripheral role, this will send the corresponding L2CAP request and wait for
- * the central to perform the procedure.
- *
- * @param[in] handle
- * Connection Handle.
- * @param[in] params
- * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
- * the parameters in the PPCP characteristic of the GAP service will be used instead.
- */
- virtual ble_error_t updateConnectionParams(Handle_t handle, const ConnectionParams_t *params) {
- /* avoid compiler warnings about unused variables */
- (void)handle;
- (void)params;
-
- return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
- }
-
- /**
- * Set the device name characteristic in the GAP service.
- * @param[in] deviceName
- * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
- */
- virtual ble_error_t setDeviceName(const uint8_t *deviceName) {
- /* Avoid compiler warnings about unused variables. */
- (void)deviceName;
-
- return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
- }
-
- /**
- * Get the value of the device name characteristic in the GAP service.
- * @param[out] deviceName
- * Pointer to an empty buffer where the UTF-8 *non NULL-
- * terminated* string will be placed. Set this
- * value to NULL in order to obtain the deviceName-length
- * from the 'length' parameter.
- *
- * @param[in/out] lengthP
- * (on input) Length of the buffer pointed to by deviceName;
- * (on output) the complete device name length (without the
- * null terminator).
- *
- * @note If the device name is longer than the size of the supplied buffer,
- * length will return the complete device name length, and not the
- * number of bytes actually returned in deviceName. The application may
- * use this information to retry with a suitable buffer size.
- */
- virtual ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
- /* avoid compiler warnings about unused variables */
- (void)deviceName;
- (void)lengthP;
-
- return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
- }
-
- /**
- * Set the appearance characteristic in the GAP service.
- * @param[in] appearance
- * The new value for the device-appearance.
- */
- virtual ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
- /* Avoid compiler warnings about unused variables. */
- (void)appearance;
-
- return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
- }
-
- /**
- * Get the appearance characteristic in the GAP service.
- * @param[out] appearance
- * The new value for the device-appearance.
- */
- virtual ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
- /* Avoid compiler warnings about unused variables. */
- (void)appearanceP;
-
- return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
- }
-
- /**
- * Set the radio's transmit power.
- * @param[in] txPower Radio transmit power in dBm.
- */
- virtual ble_error_t setTxPower(int8_t txPower) {
- /* Avoid compiler warnings about unused variables. */
- (void)txPower;
-
- return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
- }
-
- /**
- * Query the underlying stack for permitted arguments for setTxPower().
- *
- * @param[out] valueArrayPP
- * Out parameter to receive the immutable array of Tx values.
- * @param[out] countP
- * Out parameter to receive the array's size.
- */
- virtual void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
- /* Avoid compiler warnings about unused variables. */
- (void)valueArrayPP;
- (void)countP;
-
- *countP = 0; /* Requesting action from porter(s): override this API if this capability is supported. */
- }
-
- /**
- * @return Maximum size of the whitelist.
- *
- * @experimental
- */
- virtual uint8_t getMaxWhitelistSize(void) const
- {
- return 0;
- }
-
- /**
- * Get the internal whitelist to be used by the Link Layer when scanning,
- * advertising or initiating a connection depending on the filter policies.
- *
- * @param[in/out] whitelist
- * (on input) whitelist.capacity contains the maximum number
- * of addresses to be returned.
- * (on output) The populated whitelist with copies of the
- * addresses in the implementation's whitelist.
- *
- * @return BLE_ERROR_NONE if the implementation's whitelist was successfully
- * copied into the supplied reference.
- *
- * @experimental
- */
- virtual ble_error_t getWhitelist(Whitelist_t &whitelist) const
- {
- (void) whitelist;
- return BLE_ERROR_NOT_IMPLEMENTED;
- }
-
- /**
- * Set the internal whitelist to be used by the Link Layer when scanning,
- * advertising or initiating a connection depending on the filter policies.
- *
- * @param[in] whitelist
- * A reference to a whitelist containing the addresses to
- * be added to the internal whitelist.
- *
- * @return BLE_ERROR_NONE if the implementation's whitelist was successfully
- * populated with the addresses in the given whitelist.
- *
- * @note The whitelist must not contain addresses of type @ref
- * BLEProtocol::AddressType_t::RANDOM_PRIVATE_NON_RESOLVABLE, this
- * this will result in a @ref BLE_ERROR_INVALID_PARAM since the
- * remote peer might change its private address at any time and it
- * is not possible to resolve it.
- * @note If the input whitelist is larger than @ref getMaxWhitelistSize()
- * the @ref BLE_ERROR_PARAM_OUT_OF_RANGE is returned.
- *
- * @experimental
- */
- virtual ble_error_t setWhitelist(const Whitelist_t &whitelist)
- {
- (void) whitelist;
- return BLE_ERROR_NOT_IMPLEMENTED;
- }
-
- /**
- * Set the advertising policy filter mode to be used in the next call
- * to startAdvertising().
- *
- * @param[in] mode
- * The new advertising policy filter mode.
- *
- * @return BLE_ERROR_NONE if the specified policy filter mode was set
- * successfully.
- *
- * @experimental
- */
- virtual ble_error_t setAdvertisingPolicyMode(AdvertisingPolicyMode_t mode)
- {
- (void) mode;
- return BLE_ERROR_NOT_IMPLEMENTED;
- }
-
- /**
- * Set the scan policy filter mode to be used in the next call
- * to startScan().
- *
- * @param[in] mode
- * The new scan policy filter mode.
- *
- * @return BLE_ERROR_NONE if the specified policy filter mode was set
- * successfully.
- *
- * @experimental
- */
- virtual ble_error_t setScanningPolicyMode(ScanningPolicyMode_t mode)
- {
- (void) mode;
- return BLE_ERROR_NOT_IMPLEMENTED;
- }
-
- /**
- * Set the initiator policy filter mode to be used.
- *
- * @param[in] mode
- * The new initiator policy filter mode.
- *
- * @return BLE_ERROR_NONE if the specified policy filter mode was set
- * successfully.
- *
- * @experimental
- */
- virtual ble_error_t setInitiatorPolicyMode(InitiatorPolicyMode_t mode)
- {
- (void) mode;
- return BLE_ERROR_NOT_IMPLEMENTED;
- }
-
- /**
- * Get the advertising policy filter mode that will be used in the next
- * call to startAdvertising().
- *
- * @return The set advertising policy filter mode.
- *
- * @experimental
- */
- virtual AdvertisingPolicyMode_t getAdvertisingPolicyMode(void) const
- {
- return ADV_POLICY_IGNORE_WHITELIST;
- }
-
- /**
- * Get the scan policy filter mode that will be used in the next
- * call to startScan().
- *
- * @return The set scan policy filter mode.
- *
- * @experimental
- */
- virtual ScanningPolicyMode_t getScanningPolicyMode(void) const
- {
- return SCAN_POLICY_IGNORE_WHITELIST;
- }
-
- /**
- * Get the initiator policy filter mode that will be used.
- *
- * @return The set scan policy filter mode.
- *
- * @experimental
- */
- virtual InitiatorPolicyMode_t getInitiatorPolicyMode(void) const
- {
- return INIT_POLICY_IGNORE_WHITELIST;
- }
-
-
-protected:
- /* Override the following in the underlying adaptation layer to provide the functionality of scanning. */
- virtual ble_error_t startRadioScan(const GapScanningParams &scanningParams) {
- (void)scanningParams;
- return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
- }
-
- /*
- * APIs with non-virtual implementations.
- */
-public:
- /**
- * Returns the current GAP state of the device using a bitmask that
- * describes whether the device is advertising or connected.
- */
- GapState_t getState(void) const {
- return state;
- }
-
- /**
- * Set the GAP advertising mode to use for this device.
- */
- void setAdvertisingType(GapAdvertisingParams::AdvertisingType_t advType) {
- _advParams.setAdvertisingType(advType);
- }
-
- /**
- * @param[in] interval
- * Advertising interval in units of milliseconds. Advertising
- * is disabled if interval is 0. If interval is smaller than
- * the minimum supported value, then the minimum supported
- * value is used instead. This minimum value can be discovered
- * using getMinAdvertisingInterval().
- *
- * This field must be set to 0 if connectionMode is equal
- * to ADV_CONNECTABLE_DIRECTED.
- *
- * @note: Decreasing this value will allow central devices to detect a
- * peripheral faster, at the expense of more power being used by the radio
- * due to the higher data transmit rate.
- *
- * @Note: [WARNING] This API previously used 0.625ms as the unit for its
- * 'interval' argument. That required an explicit conversion from
- * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
- * no longer required as the new units are milliseconds. Any application
- * code depending on the old semantics needs to be updated accordingly.
- */
- void setAdvertisingInterval(uint16_t interval) {
- if (interval == 0) {
- stopAdvertising();
- } else if (interval < getMinAdvertisingInterval()) {
- interval = getMinAdvertisingInterval();
- }
- _advParams.setInterval(interval);
- }
-
- /**
- * @param[in] timeout
- * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
- * and 16383). Use 0 to disable the advertising timeout.
- */
- void setAdvertisingTimeout(uint16_t timeout) {
- _advParams.setTimeout(timeout);
- }
-
- /**
- * Start advertising.
- */
- ble_error_t startAdvertising(void) {
- setAdvertisingData(); /* Update the underlying stack. */
- return startAdvertising(_advParams);
- }
-
- /**
- * Reset any advertising payload prepared from prior calls to
- * accumulateAdvertisingPayload(). This automatically propagates the re-
- * initialized advertising payload to the underlying stack.
- */
- void clearAdvertisingPayload(void) {
- _advPayload.clear();
- setAdvertisingData();
- }
-
- /**
- * Accumulate an AD structure in the advertising payload. Please note that
- * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
- * as an additional 31 bytes if the advertising payload is too
- * small.
- *
- * @param[in] flags
- * The flags to be added. Please refer to
- * GapAdvertisingData::Flags for valid flags. Multiple
- * flags may be specified in combination.
- */
- ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
- ble_error_t rc;
- if ((rc = _advPayload.addFlags(flags)) != BLE_ERROR_NONE) {
- return rc;
- }
-
- return setAdvertisingData();
- }
-
- /**
- * Accumulate an AD structure in the advertising payload. Please note that
- * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
- * as an additional 31 bytes if the advertising payload is too
- * small.
- *
- * @param app
- * The appearance of the peripheral.
- */
- ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
- setAppearance(app);
-
- ble_error_t rc;
- if ((rc = _advPayload.addAppearance(app)) != BLE_ERROR_NONE) {
- return rc;
- }
-
- return setAdvertisingData();
- }
-
- /**
- * Accumulate an AD structure in the advertising payload. Please note that
- * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
- * as an additional 31 bytes if the advertising payload is too
- * small.
- *
- * @param power
- * The max transmit power to be used by the controller (in dBm).
- */
- ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
- ble_error_t rc;
- if ((rc = _advPayload.addTxPower(power)) != BLE_ERROR_NONE) {
- return rc;
- }
-
- return setAdvertisingData();
- }
-
- /**
- * Accumulate a variable length byte-stream as an AD structure in the
- * advertising payload. Please note that the payload is limited to 31 bytes.
- * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
- * advertising payload is too small.
- *
- * @param type The type describing the variable length data.
- * @param data Data bytes.
- * @param len Length of data.
- *
- * @return BLE_ERROR_NONE if the advertisement payload was updated based on
- * matching AD type; otherwise, an appropriate error.
- *
- * @note When the specified AD type is INCOMPLETE_LIST_16BIT_SERVICE_IDS,
- * COMPLETE_LIST_16BIT_SERVICE_IDS, INCOMPLETE_LIST_32BIT_SERVICE_IDS,
- * COMPLETE_LIST_32BIT_SERVICE_IDS, INCOMPLETE_LIST_128BIT_SERVICE_IDS,
- * COMPLETE_LIST_128BIT_SERVICE_IDS or LIST_128BIT_SOLICITATION_IDS the
- * supplied value is appended to the values previously added to the
- * payload.
- */
- ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
- if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
- setDeviceName(data);
- }
-
- ble_error_t rc;
- if ((rc = _advPayload.addData(type, data, len)) != BLE_ERROR_NONE) {
- return rc;
- }
-
- return setAdvertisingData();
- }
-
- /**
- * Update a particular ADV field in the advertising payload (based on
- * matching type).
- *
- * @param[in] type The ADV type field describing the variable length data.
- * @param[in] data Data bytes.
- * @param[in] len Length of data.
- *
- * @note: If advertisements are enabled, then the update will take effect immediately.
- *
- * @return BLE_ERROR_NONE if the advertisement payload was updated based on
- * matching AD type; otherwise, an appropriate error.
- */
- ble_error_t updateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
- if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
- setDeviceName(data);
- }
-
- ble_error_t rc;
- if ((rc = _advPayload.updateData(type, data, len)) != BLE_ERROR_NONE) {
- return rc;
- }
-
- return setAdvertisingData();
- }
-
- /**
- * Set up a particular, user-constructed advertisement payload for the
- * underlying stack. It would be uncommon for this API to be used directly;
- * there are other APIs to build an advertisement payload (see above).
- */
- ble_error_t setAdvertisingPayload(const GapAdvertisingData &payload) {
- _advPayload = payload;
- return setAdvertisingData();
- }
-
- /**
- * @return Read back advertising data. Useful for storing and
- * restoring payload.
- */
- const GapAdvertisingData &getAdvertisingPayload(void) const {
- return _advPayload;
- }
-
- /**
- * Accumulate a variable length byte-stream as an AD structure in the
- * scanResponse payload.
- *
- * @param[in] type The type describing the variable length data.
- * @param[in] data Data bytes.
- * @param[in] len Length of data.
- */
- ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
- ble_error_t rc;
- if ((rc = _scanResponse.addData(type, data, len)) != BLE_ERROR_NONE) {
- return rc;
- }
-
- return setAdvertisingData();
- }
-
- /**
- * Reset any scan response prepared from prior calls to
- * accumulateScanResponse().
- *
- * Note: This should be followed by a call to setAdvertisingPayload() or
- * startAdvertising() before the update takes effect.
- */
- void clearScanResponse(void) {
- _scanResponse.clear();
- setAdvertisingData();
- }
-
- /**
- * Set up parameters for GAP scanning (observer mode).
- * @param[in] interval
- * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
- * @param[in] window
- * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
- * @param[in] timeout
- * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
- * @param[in] activeScanning
- * Set to True if active-scanning is required. This is used to fetch the
- * scan response from a peer if possible.
- *
- * The scanning window divided by the interval determines the duty cycle for
- * scanning. For example, if the interval is 100ms and the window is 10ms,
- * then the controller will scan for 10 percent of the time. It is possible
- * to have the interval and window set to the same value. In this case,
- * scanning is continuous, with a change of scanning frequency once every
- * interval.
- *
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
- *
- * @Note: The scan interval and window are recommendations to the BLE stack.
- */
- ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
- uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
- uint16_t timeout = 0,
- bool activeScanning = false) {
- ble_error_t rc;
- if (((rc = _scanningParams.setInterval(interval)) == BLE_ERROR_NONE) &&
- ((rc = _scanningParams.setWindow(window)) == BLE_ERROR_NONE) &&
- ((rc = _scanningParams.setTimeout(timeout)) == BLE_ERROR_NONE)) {
- _scanningParams.setActiveScanning(activeScanning);
- return BLE_ERROR_NONE;
- }
-
- return rc;
- }
-
- /**
- * Set up the scanInterval parameter for GAP scanning (observer mode).
- * @param[in] interval
- * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
- *
- * The scanning window divided by the interval determines the duty cycle for
- * scanning. For example, if the interval is 100ms and the window is 10ms,
- * then the controller will scan for 10 percent of the time. It is possible
- * to have the interval and window set to the same value. In this case,
- * scanning is continuous, with a change of scanning frequency once every
- * interval.
- *
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
- */
- ble_error_t setScanInterval(uint16_t interval) {
- return _scanningParams.setInterval(interval);
- }
-
- /**
- * Set up the scanWindow parameter for GAP scanning (observer mode).
- * @param[in] window
- * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
- *
- * The scanning window divided by the interval determines the duty cycle for
- * scanning. For example, if the interval is 100ms and the window is 10ms,
- * then the controller will scan for 10 percent of the time. It is possible
- * to have the interval and window set to the same value. In this case,
- * scanning is continuous, with a change of scanning frequency once every
- * interval.
- *
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
- *
- * If scanning is already active, the updated value of scanWindow will be
- * propagated to the underlying BLE stack.
- */
- ble_error_t setScanWindow(uint16_t window) {
- ble_error_t rc;
- if ((rc = _scanningParams.setWindow(window)) != BLE_ERROR_NONE) {
- return rc;
- }
-
- /* If scanning is already active, propagate the new setting to the stack. */
- if (scanningActive) {
- return startRadioScan(_scanningParams);
- }
-
- return BLE_ERROR_NONE;
- }
-
- /**
- * Set up parameters for GAP scanning (observer mode).
- * @param[in] timeout
- * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
- *
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
- *
- * If scanning is already active, the updated value of scanTimeout will be
- * propagated to the underlying BLE stack.
- */
- ble_error_t setScanTimeout(uint16_t timeout) {
- ble_error_t rc;
- if ((rc = _scanningParams.setTimeout(timeout)) != BLE_ERROR_NONE) {
- return rc;
- }
-
- /* If scanning is already active, propagate the new settings to the stack. */
- if (scanningActive) {
- return startRadioScan(_scanningParams);
- }
-
- return BLE_ERROR_NONE;
- }
-
- /**
- * Set up parameters for GAP scanning (observer mode).
- * @param[in] activeScanning
- * Set to True if active-scanning is required. This is used to fetch the
- * scan response from a peer if possible.
- *
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
- *
- * If scanning is already in progress, then active-scanning will be enabled
- * for the underlying BLE stack.
- */
- ble_error_t setActiveScanning(bool activeScanning) {
- _scanningParams.setActiveScanning(activeScanning);
-
- /* If scanning is already active, propagate the new settings to the stack. */
- if (scanningActive) {
- return startRadioScan(_scanningParams);
- }
-
- return BLE_ERROR_NONE;
- }
-
- /**
- * Start scanning (Observer Procedure) based on the parameters currently in
- * effect.
- *
- * @param[in] callback
- * The application-specific callback to be invoked upon
- * receiving every advertisement report. This can be passed in
- * as NULL, in which case scanning may not be enabled at all.
- */
- ble_error_t startScan(void (*callback)(const AdvertisementCallbackParams_t *params)) {
- ble_error_t err = BLE_ERROR_NONE;
- if (callback) {
- if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
- scanningActive = true;
- onAdvertisementReport.attach(callback);
- }
- }
-
- return err;
- }
-
- /**
- * Same as above, but this takes an (object, method) pair for a callback.
- */
- template<typename T>
- ble_error_t startScan(T *object, void (T::*callbackMember)(const AdvertisementCallbackParams_t *params)) {
- ble_error_t err = BLE_ERROR_NONE;
- if (object && callbackMember) {
- if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
- scanningActive = true;
- onAdvertisementReport.attach(object, callbackMember);
- }
- }
-
- return err;
- }
-
- /**
- * Initialize radio-notification events to be generated from the stack.
- * This API doesn't need to be called directly.
- *
- * Radio Notification is a feature that enables ACTIVE and INACTIVE
- * (nACTIVE) signals from the stack that notify the application when the
- * radio is in use.
- *
- * The ACTIVE signal is sent before the radio event starts. The nACTIVE
- * signal is sent at the end of the radio event. These signals can be used
- * by the application programmer to synchronize application logic with radio
- * activity. For example, the ACTIVE signal can be used to shut off external
- * devices, to manage peak current drawn during periods when the radio is on,
- * or to trigger sensor data collection for transmission in the Radio Event.
- *
- * @return BLE_ERROR_NONE on successful initialization, otherwise an error code.
- */
- virtual ble_error_t initRadioNotification(void) {
- return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
- }
-
-private:
- ble_error_t setAdvertisingData(void) {
- return setAdvertisingData(_advPayload, _scanResponse);
- }
-
-private:
- virtual ble_error_t setAdvertisingData(const GapAdvertisingData &advData, const GapAdvertisingData &scanResponse) = 0;
- virtual ble_error_t startAdvertising(const GapAdvertisingParams &) = 0;
-
-public:
- /**
- * Accessors to read back currently active advertising params.
- */
- GapAdvertisingParams &getAdvertisingParams(void) {
- return _advParams;
- }
- const GapAdvertisingParams &getAdvertisingParams(void) const {
- return _advParams;
- }
-
- /**
- * Set up a particular, user-constructed set of advertisement parameters for
- * the underlying stack. It would be uncommon for this API to be used
- * directly; there are other APIs to tweak advertisement parameters
- * individually.
- */
- void setAdvertisingParams(const GapAdvertisingParams &newParams) {
- _advParams = newParams;
- }
-
- /* Event callback handlers. */
-public:
- /**
- * Set up a callback for timeout events. Refer to TimeoutSource_t for
- * possible event types.
- * @note It is possible to unregister callbacks using onTimeout().detach(callback)
- */
- void onTimeout(TimeoutEventCallback_t callback) {
- timeoutCallbackChain.add(callback);
- }
-
- /**
- * @brief provide access to the callchain of timeout event callbacks
- * It is possible to register callbacks using onTimeout().add(callback);
- * It is possible to unregister callbacks using onTimeout().detach(callback)
- * @return The timeout event callbacks chain
- */
- TimeoutEventCallbackChain_t& onTimeout() {
- return timeoutCallbackChain;
- }
-
- /**
- * Append to a chain of callbacks to be invoked upon GAP connection.
- * @note It is possible to unregister callbacks using onConnection().detach(callback)
- */
- void onConnection(ConnectionEventCallback_t callback) {connectionCallChain.add(callback);}
-
- template<typename T>
- void onConnection(T *tptr, void (T::*mptr)(const ConnectionCallbackParams_t*)) {connectionCallChain.add(tptr, mptr);}
-
- /**
- * @brief provide access to the callchain of connection event callbacks
- * It is possible to register callbacks using onConnection().add(callback);
- * It is possible to unregister callbacks using onConnection().detach(callback)
- * @return The connection event callbacks chain
- */
- ConnectionEventCallbackChain_t& onConnection() {
- return connectionCallChain;
- }
-
- /**
- * Append to a chain of callbacks to be invoked upon GAP disconnection.
- * @note It is possible to unregister callbacks using onDisconnection().detach(callback)
- */
- void onDisconnection(DisconnectionEventCallback_t callback) {disconnectionCallChain.add(callback);}
-
- template<typename T>
- void onDisconnection(T *tptr, void (T::*mptr)(const DisconnectionCallbackParams_t*)) {disconnectionCallChain.add(tptr, mptr);}
-
- /**
- * @brief provide access to the callchain of disconnection event callbacks
- * It is possible to register callbacks using onDisconnection().add(callback);
- * It is possible to unregister callbacks using onDisconnection().detach(callback)
- * @return The disconnection event callbacks chain
- */
- DisconnectionEventCallbackChain_t& onDisconnection() {
- return disconnectionCallChain;
- }
-
- /**
- * Set the application callback for radio-notification events.
- *
- * Radio Notification is a feature that enables ACTIVE and INACTIVE
- * (nACTIVE) signals from the stack that notify the application when the
- * radio is in use.
- *
- * The ACTIVE signal is sent before the radio event starts. The nACTIVE
- * signal is sent at the end of the radio event. These signals can be used
- * by the application programmer to synchronize application logic with radio
- * activity. For example, the ACTIVE signal can be used to shut off external
- * devices, to manage peak current drawn during periods when the radio is on,
- * or to trigger sensor data collection for transmission in the Radio Event.
- *
- * @param callback
- * The application handler to be invoked in response to a radio
- * ACTIVE/INACTIVE event.
- *
- * Or in the other version:
- *
- * @param tptr
- * Pointer to the object of a class defining the member callback
- * function (mptr).
- * @param mptr
- * The member callback (within the context of an object) to be
- * invoked in response to a radio ACTIVE/INACTIVE event.
- */
- void onRadioNotification(void (*callback)(bool param)) {
- radioNotificationCallback.attach(callback);
- }
- template <typename T>
- void onRadioNotification(T *tptr, void (T::*mptr)(bool)) {
- radioNotificationCallback.attach(tptr, mptr);
- }
-
- /**
- * Setup a callback to be invoked to notify the user application that the
- * Gap instance is about to shutdown (possibly as a result of a call
- * to BLE::shutdown()).
- *
- * @Note: It is possible to chain together multiple onShutdown callbacks
- * (potentially from different modules of an application) to be notified
- * before the Gap instance is shutdown.
- *
- * @Note: It is also possible to set up a callback into a member function of
- * some object.
- *
- * @Note It is possible to unregister a callback using onShutdown().detach(callback)
- */
- void onShutdown(const GapShutdownCallback_t& callback) {
- shutdownCallChain.add(callback);
- }
- template <typename T>
- void onShutdown(T *objPtr, void (T::*memberPtr)(void)) {
- shutdownCallChain.add(objPtr, memberPtr);
- }
-
- /**
- * @brief provide access to the callchain of shutdown event callbacks
- * It is possible to register callbacks using onShutdown().add(callback);
- * It is possible to unregister callbacks using onShutdown().detach(callback)
- * @return The shutdown event callbacks chain
- */
- GapShutdownCallbackChain_t& onShutdown() {
- return shutdownCallChain;
- }
-
-public:
- /**
- * Notify all registered onShutdown callbacks that the Gap instance is
- * about to be shutdown and clear all Gap state of the
- * associated object.
- *
- * This function is meant to be overridden in the platform-specific
- * sub-class. Nevertheless, the sub-class is only expected to reset its
- * state and not the data held in Gap members. This shall be achieved by a
- * call to Gap::reset() from the sub-class' reset() implementation.
- *
- * @return BLE_ERROR_NONE on success.
- *
- * @note: Currently a call to reset() does not reset the advertising and
- * scan parameters to default values.
- */
- virtual ble_error_t reset(void) {
- /* Notify that the instance is about to shutdown */
- shutdownCallChain.call(this);
- shutdownCallChain.clear();
-
- /* Clear Gap state */
- state.advertising = 0;
- state.connected = 0;
-
- /* Clear scanning state */
- scanningActive = false;
-
- /* Clear advertising and scanning data */
- _advPayload.clear();
- _scanResponse.clear();
-
- /* Clear callbacks */
- timeoutCallbackChain.clear();
- connectionCallChain.clear();
- disconnectionCallChain.clear();
- radioNotificationCallback = NULL;
- onAdvertisementReport = NULL;
-
- return BLE_ERROR_NONE;
- }
-
-protected:
- Gap() :
- _advParams(),
- _advPayload(),
- _scanningParams(),
- _scanResponse(),
- state(),
- scanningActive(false),
- timeoutCallbackChain(),
- radioNotificationCallback(),
- onAdvertisementReport(),
- connectionCallChain(),
- disconnectionCallChain() {
- _advPayload.clear();
- _scanResponse.clear();
- }
-
- /* Entry points for the underlying stack to report events back to the user. */
-public:
- void processConnectionEvent(Handle_t handle,
- Role_t role,
- BLEProtocol::AddressType_t peerAddrType,
- const BLEProtocol::AddressBytes_t peerAddr,
- BLEProtocol::AddressType_t ownAddrType,
- const BLEProtocol::AddressBytes_t ownAddr,
- const ConnectionParams_t *connectionParams) {
- state.connected = 1;
- ConnectionCallbackParams_t callbackParams(handle, role, peerAddrType, peerAddr, ownAddrType, ownAddr, connectionParams);
- connectionCallChain.call(&callbackParams);
- }
-
- void processDisconnectionEvent(Handle_t handle, DisconnectionReason_t reason) {
- state.connected = 0;
- DisconnectionCallbackParams_t callbackParams(handle, reason);
- disconnectionCallChain.call(&callbackParams);
- }
-
- void processAdvertisementReport(const BLEProtocol::AddressBytes_t peerAddr,
- int8_t rssi,
- bool isScanResponse,
- GapAdvertisingParams::AdvertisingType_t type,
- uint8_t advertisingDataLen,
- const uint8_t *advertisingData) {
- AdvertisementCallbackParams_t params;
- memcpy(params.peerAddr, peerAddr, ADDR_LEN);
- params.rssi = rssi;
- params.isScanResponse = isScanResponse;
- params.type = type;
- params.advertisingDataLen = advertisingDataLen;
- params.advertisingData = advertisingData;
- onAdvertisementReport.call(¶ms);
- }
-
- void processTimeoutEvent(TimeoutSource_t source) {
- if (timeoutCallbackChain) {
- timeoutCallbackChain(source);
- }
- }
-
-protected:
- GapAdvertisingParams _advParams;
- GapAdvertisingData _advPayload;
- GapScanningParams _scanningParams;
- GapAdvertisingData _scanResponse;
-
- GapState_t state;
- bool scanningActive;
-
-protected:
- TimeoutEventCallbackChain_t timeoutCallbackChain;
- RadioNotificationEventCallback_t radioNotificationCallback;
- AdvertisementReportCallback_t onAdvertisementReport;
- ConnectionEventCallbackChain_t connectionCallChain;
- DisconnectionEventCallbackChain_t disconnectionCallChain;
-
-private:
- GapShutdownCallbackChain_t shutdownCallChain;
-
-private:
- /* Disallow copy and assignment. */
- Gap(const Gap &);
- Gap& operator=(const Gap &);
-};
-
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __GAP_H__
+#define __GAP_H__
+
+#include "GapAdvertisingData.h"
+#include "GapAdvertisingParams.h"
+#include "GapScanningParams.h"
+#include "GapEvents.h"
+#include "CallChainOfFunctionPointersWithContext.h"
+#include "FunctionPointerWithContext.h"
+
+/* Forward declarations for classes that will only be used for pointers or references in the following. */
+class GapAdvertisingParams;
+class GapScanningParams;
+class GapAdvertisingData;
+
+class Gap {
+public:
+ enum AddressType_t {
+ ADDR_TYPE_PUBLIC = 0,
+ ADDR_TYPE_RANDOM_STATIC,
+ ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE,
+ ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE
+ };
+ typedef enum AddressType_t addr_type_t; /* @Note: Deprecated. Use AddressType_t instead. */
+
+ static const unsigned ADDR_LEN = 6;
+ typedef uint8_t Address_t[ADDR_LEN]; /* 48-bit address, LSB format. */
+ typedef Address_t address_t; /* @Note: Deprecated. Use Address_t instead. */
+
+ enum TimeoutSource_t {
+ TIMEOUT_SRC_ADVERTISING = 0x00, /**< Advertising timeout. */
+ TIMEOUT_SRC_SECURITY_REQUEST = 0x01, /**< Security request timeout. */
+ TIMEOUT_SRC_SCAN = 0x02, /**< Scanning timeout. */
+ TIMEOUT_SRC_CONN = 0x03, /**< Connection timeout. */
+ };
+
+ /**
+ * Enumeration for disconnection reasons. The values for these reasons are
+ * derived from Nordic's implementation, but the reasons are meant to be
+ * independent of the transport. If you are returned a reason that is not
+ * covered by this enumeration, please refer to the underlying
+ * transport library.
+ */
+ enum DisconnectionReason_t {
+ CONNECTION_TIMEOUT = 0x08,
+ REMOTE_USER_TERMINATED_CONNECTION = 0x13,
+ REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES = 0x14, /**< Remote device terminated connection due to low resources.*/
+ REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF = 0x15, /**< Remote device terminated connection due to power off. */
+ LOCAL_HOST_TERMINATED_CONNECTION = 0x16,
+ CONN_INTERVAL_UNACCEPTABLE = 0x3B,
+ };
+
+ /* Describes the current state of the device (more than one bit can be set). */
+ struct GapState_t {
+ unsigned advertising : 1; /**< Peripheral is currently advertising. */
+ unsigned connected : 1; /**< Peripheral is connected to a central. */
+ };
+
+ typedef uint16_t Handle_t; /* Type for connection handle. */
+
+ typedef struct {
+ uint16_t minConnectionInterval; /**< Minimum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
+ uint16_t maxConnectionInterval; /**< Maximum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
+ uint16_t slaveLatency; /**< Slave Latency in number of connection events, see @ref BLE_GAP_CP_LIMITS.*/
+ uint16_t connectionSupervisionTimeout; /**< Connection Supervision Timeout in 10 ms units, see @ref BLE_GAP_CP_LIMITS.*/
+ } ConnectionParams_t;
+
+ enum Role_t {
+ PERIPHERAL = 0x1, /**< Peripheral Role. */
+ CENTRAL = 0x2, /**< Central Role. */
+ };
+
+ struct AdvertisementCallbackParams_t {
+ Address_t peerAddr;
+ int8_t rssi;
+ bool isScanResponse;
+ GapAdvertisingParams::AdvertisingType_t type;
+ uint8_t advertisingDataLen;
+ const uint8_t *advertisingData;
+ };
+ typedef FunctionPointerWithContext<const AdvertisementCallbackParams_t *> AdvertisementReportCallback_t;
+
+ struct ConnectionCallbackParams_t {
+ Handle_t handle;
+ Role_t role;
+ AddressType_t peerAddrType;
+ Address_t peerAddr;
+ AddressType_t ownAddrType;
+ Address_t ownAddr;
+ const ConnectionParams_t *connectionParams;
+
+ ConnectionCallbackParams_t(Handle_t handleIn,
+ Role_t roleIn,
+ AddressType_t peerAddrTypeIn,
+ const uint8_t *peerAddrIn,
+ AddressType_t ownAddrTypeIn,
+ const uint8_t *ownAddrIn,
+ const ConnectionParams_t *connectionParamsIn) :
+ handle(handleIn),
+ role(roleIn),
+ peerAddrType(peerAddrTypeIn),
+ peerAddr(),
+ ownAddrType(ownAddrTypeIn),
+ ownAddr(),
+ connectionParams(connectionParamsIn) {
+ memcpy(peerAddr, peerAddrIn, ADDR_LEN);
+ memcpy(ownAddr, ownAddrIn, ADDR_LEN);
+ }
+ };
+
+ struct DisconnectionCallbackParams_t {
+ Handle_t handle;
+ DisconnectionReason_t reason;
+
+ DisconnectionCallbackParams_t(Handle_t handleIn,
+ DisconnectionReason_t reasonIn) :
+ handle(handleIn),
+ reason(reasonIn)
+ {}
+ };
+
+ static const uint16_t UNIT_1_25_MS = 1250; /**< Number of microseconds in 1.25 milliseconds. */
+ static uint16_t MSEC_TO_GAP_DURATION_UNITS(uint32_t durationInMillis) {
+ return (durationInMillis * 1000) / UNIT_1_25_MS;
+ }
+
+ typedef FunctionPointerWithContext<TimeoutSource_t> TimeoutEventCallback_t;
+ typedef CallChainOfFunctionPointersWithContext<TimeoutSource_t> TimeoutEventCallbackChain_t;
+
+ typedef FunctionPointerWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallback_t;
+ typedef CallChainOfFunctionPointersWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallbackChain_t;
+
+ typedef FunctionPointerWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallback_t;
+ typedef CallChainOfFunctionPointersWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallbackChain_t;
+
+ typedef FunctionPointerWithContext<bool> RadioNotificationEventCallback_t;
+
+ /*
+ * The following functions are meant to be overridden in the platform-specific sub-class.
+ */
+public:
+ /**
+ * Set the BTLE MAC address and type. Please note that the address format is
+ * least significant byte first (LSB). Please refer to Address_t.
+ *
+ * @return BLE_ERROR_NONE on success.
+ */
+ virtual ble_error_t setAddress(AddressType_t type, const Address_t address) {
+ /* avoid compiler warnings about unused variables */
+ (void)type;
+ (void)address;
+
+ return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
+ }
+
+ /**
+ * Fetch the BTLE MAC address and type.
+ *
+ * @return BLE_ERROR_NONE on success.
+ */
+ virtual ble_error_t getAddress(AddressType_t *typeP, Address_t address) {
+ /* Avoid compiler warnings about unused variables. */
+ (void)typeP;
+ (void)address;
+
+ return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
+ }
+
+ /**
+ * @return Minimum Advertising interval in milliseconds.
+ */
+ virtual uint16_t getMinAdvertisingInterval(void) const {
+ return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
+ }
+
+ /**
+ * @return Minimum Advertising interval in milliseconds for non-connectible mode.
+ */
+ virtual uint16_t getMinNonConnectableAdvertisingInterval(void) const {
+ return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
+ }
+
+ /**
+ * @return Maximum Advertising interval in milliseconds.
+ */
+ virtual uint16_t getMaxAdvertisingInterval(void) const {
+ return 0xFFFF; /* Requesting action from porter(s): override this API if this capability is supported. */
+ }
+
+ virtual ble_error_t stopAdvertising(void) {
+ return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
+ }
+
+ /**
+ * Stop scanning. The current scanning parameters remain in effect.
+ *
+ * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
+ */
+ virtual ble_error_t stopScan() {
+ return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
+ }
+
+ /**
+ * Create a connection (GAP Link Establishment).
+ *
+ * @param peerAddr
+ * 48-bit address, LSB format.
+ * @param peerAddrType
+ * Address type of the peer.
+ * @param connectionParams
+ * Connection parameters.
+ * @param scanParams
+ * Paramters to be used while scanning for the peer.
+ * @return BLE_ERROR_NONE if connection establishment procedure is started
+ * successfully. The connectionCallChain (if set) will be invoked upon
+ * a connection event.
+ */
+ virtual ble_error_t connect(const Address_t peerAddr,
+ Gap::AddressType_t peerAddrType,
+ const ConnectionParams_t *connectionParams,
+ const GapScanningParams *scanParams) {
+ /* Avoid compiler warnings about unused variables. */
+ (void)peerAddr;
+ (void)peerAddrType;
+ (void)connectionParams;
+ (void)scanParams;
+
+ return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
+ }
+
+ /**
+ * This call initiates the disconnection procedure, and its completion will
+ * be communicated to the application with an invocation of the
+ * disconnectionCallback.
+ *
+ * @param reason
+ * The reason for disconnection; to be sent back to the peer.
+ */
+ virtual ble_error_t disconnect(Handle_t connectionHandle, DisconnectionReason_t reason) {
+ /* avoid compiler warnings about unused variables */
+ (void)connectionHandle;
+ (void)reason;
+
+ return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
+ }
+
+ /**
+ * This call initiates the disconnection procedure, and its completion will
+ * be communicated to the application with an invocation of the
+ * disconnectionCallback.
+ *
+ * @param reason
+ * The reason for disconnection; to be sent back to the peer.
+ *
+ * @note: This version of disconnect() doesn't take a connection handle. It
+ * works reliably only for stacks that are limited to a single
+ * connection. This API should be considered *deprecated* in favour of the
+ * alternative, which takes a connection handle. It will be dropped in the future.
+ */
+ virtual ble_error_t disconnect(DisconnectionReason_t reason) {
+ /* Avoid compiler warnings about unused variables. */
+ (void)reason;
+
+ return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
+ }
+
+ /**
+ * Get the GAP peripheral preferred connection parameters. These are the
+ * defaults that the peripheral would like to have in a connection. The
+ * choice of the connection parameters is eventually up to the central.
+ *
+ * @param[out] params
+ * The structure where the parameters will be stored. Memory
+ * for this is owned by the caller.
+ *
+ * @return BLE_ERROR_NONE if the parameters were successfully filled into
+ * the given structure pointed to by params.
+ */
+ virtual ble_error_t getPreferredConnectionParams(ConnectionParams_t *params) {
+ /* Avoid compiler warnings about unused variables. */
+ (void)params;
+
+ return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
+ }
+
+ /**
+ * Set the GAP peripheral preferred connection parameters. These are the
+ * defaults that the peripheral would like to have in a connection. The
+ * choice of the connection parameters is eventually up to the central.
+ *
+ * @param[in] params
+ * The structure containing the desired parameters.
+ */
+ virtual ble_error_t setPreferredConnectionParams(const ConnectionParams_t *params) {
+ /* Avoid compiler warnings about unused variables. */
+ (void)params;
+
+ return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
+ }
+
+ /**
+ * Update connection parameters.
+ * In the central role this will initiate a Link Layer connection parameter update procedure.
+ * In the peripheral role, this will send the corresponding L2CAP request and wait for
+ * the central to perform the procedure.
+ *
+ * @param[in] handle
+ * Connection Handle.
+ * @param[in] params
+ * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
+ * the parameters in the PPCP characteristic of the GAP service will be used instead.
+ */
+ virtual ble_error_t updateConnectionParams(Handle_t handle, const ConnectionParams_t *params) {
+ /* avoid compiler warnings about unused variables */
+ (void)handle;
+ (void)params;
+
+ return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
+ }
+
+ /**
+ * Set the device name characteristic in the GAP service.
+ * @param[in] deviceName
+ * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
+ */
+ virtual ble_error_t setDeviceName(const uint8_t *deviceName) {
+ /* Avoid compiler warnings about unused variables. */
+ (void)deviceName;
+
+ return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
+ }
+
+ /**
+ * Get the value of the device name characteristic in the GAP service.
+ * @param[out] deviceName
+ * Pointer to an empty buffer where the UTF-8 *non NULL-
+ * terminated* string will be placed. Set this
+ * value to NULL in order to obtain the deviceName-length
+ * from the 'length' parameter.
+ *
+ * @param[in/out] lengthP
+ * (on input) Length of the buffer pointed to by deviceName;
+ * (on output) the complete device name length (without the
+ * null terminator).
+ *
+ * @note If the device name is longer than the size of the supplied buffer,
+ * length will return the complete device name length, and not the
+ * number of bytes actually returned in deviceName. The application may
+ * use this information to retry with a suitable buffer size.
+ */
+ virtual ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
+ /* avoid compiler warnings about unused variables */
+ (void)deviceName;
+ (void)lengthP;
+
+ return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
+ }
+
+ /**
+ * Set the appearance characteristic in the GAP service.
+ * @param[in] appearance
+ * The new value for the device-appearance.
+ */
+ virtual ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
+ /* Avoid compiler warnings about unused variables. */
+ (void)appearance;
+
+ return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
+ }
+
+ /**
+ * Get the appearance characteristic in the GAP service.
+ * @param[out] appearance
+ * The new value for the device-appearance.
+ */
+ virtual ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
+ /* Avoid compiler warnings about unused variables. */
+ (void)appearanceP;
+
+ return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
+ }
+
+ /**
+ * Set the radio's transmit power.
+ * @param[in] txPower Radio transmit power in dBm.
+ */
+ virtual ble_error_t setTxPower(int8_t txPower) {
+ /* Avoid compiler warnings about unused variables. */
+ (void)txPower;
+
+ return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
+ }
+
+ /**
+ * Query the underlying stack for permitted arguments for setTxPower().
+ *
+ * @param[out] valueArrayPP
+ * Out parameter to receive the immutable array of Tx values.
+ * @param[out] countP
+ * Out parameter to receive the array's size.
+ */
+ virtual void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
+ /* Avoid compiler warnings about unused variables. */
+ (void)valueArrayPP;
+ (void)countP;
+
+ *countP = 0; /* Requesting action from porter(s): override this API if this capability is supported. */
+ }
+
+protected:
+ /* Override the following in the underlying adaptation layer to provide the functionality of scanning. */
+ virtual ble_error_t startRadioScan(const GapScanningParams &scanningParams) {
+ (void)scanningParams;
+ return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
+ }
+
+ /*
+ * APIs with non-virtual implementations.
+ */
+public:
+ /**
+ * Returns the current GAP state of the device using a bitmask that
+ * describes whether the device is advertising or connected.
+ */
+ GapState_t getState(void) const {
+ return state;
+ }
+
+ /**
+ * Set the GAP advertising mode to use for this device.
+ */
+ void setAdvertisingType(GapAdvertisingParams::AdvertisingType_t advType) {
+ _advParams.setAdvertisingType(advType);
+ }
+
+ /**
+ * @param[in] interval
+ * Advertising interval in units of milliseconds. Advertising
+ * is disabled if interval is 0. If interval is smaller than
+ * the minimum supported value, then the minimum supported
+ * value is used instead. This minimum value can be discovered
+ * using getMinAdvertisingInterval().
+ *
+ * This field must be set to 0 if connectionMode is equal
+ * to ADV_CONNECTABLE_DIRECTED.
+ *
+ * @note: Decreasing this value will allow central devices to detect a
+ * peripheral faster, at the expense of more power being used by the radio
+ * due to the higher data transmit rate.
+ *
+ * @note: This API is now *deprecated* and will be dropped in the future.
+ * You should use the parallel API from Gap directly. A former call to
+ * ble.setAdvertisingInterval(...) should now be achieved using
+ * ble.gap().setAdvertisingInterval(...).
+ *
+ * @Note: [WARNING] This API previously used 0.625ms as the unit for its
+ * 'interval' argument. That required an explicit conversion from
+ * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
+ * no longer required as the new units are milliseconds. Any application
+ * code depending on the old semantics needs to be updated accordingly.
+ */
+ void setAdvertisingInterval(uint16_t interval) {
+ if (interval == 0) {
+ stopAdvertising();
+ } else if (interval < getMinAdvertisingInterval()) {
+ interval = getMinAdvertisingInterval();
+ }
+ _advParams.setInterval(interval);
+ }
+
+ /**
+ * @param[in] timeout
+ * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
+ * and 16383). Use 0 to disable the advertising timeout.
+ */
+ void setAdvertisingTimeout(uint16_t timeout) {
+ _advParams.setTimeout(timeout);
+ }
+
+ /**
+ * Start advertising.
+ */
+ ble_error_t startAdvertising(void) {
+ setAdvertisingData(); /* Update the underlying stack. */
+ return startAdvertising(_advParams);
+ }
+
+ /**
+ * Reset any advertising payload prepared from prior calls to
+ * accumulateAdvertisingPayload(). This automatically propagates the re-
+ * initialized advertising payload to the underlying stack.
+ */
+ void clearAdvertisingPayload(void) {
+ _advPayload.clear();
+ setAdvertisingData();
+ }
+
+ /**
+ * Accumulate an AD structure in the advertising payload. Please note that
+ * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
+ * as an additional 31 bytes if the advertising payload is too
+ * small.
+ *
+ * @param[in] flags
+ * The flags to be added. Please refer to
+ * GapAdvertisingData::Flags for valid flags. Multiple
+ * flags may be specified in combination.
+ */
+ ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
+ ble_error_t rc;
+ if ((rc = _advPayload.addFlags(flags)) != BLE_ERROR_NONE) {
+ return rc;
+ }
+
+ return setAdvertisingData();
+ }
+
+ /**
+ * Accumulate an AD structure in the advertising payload. Please note that
+ * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
+ * as an additional 31 bytes if the advertising payload is too
+ * small.
+ *
+ * @param app
+ * The appearance of the peripheral.
+ */
+ ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
+ setAppearance(app);
+
+ ble_error_t rc;
+ if ((rc = _advPayload.addAppearance(app)) != BLE_ERROR_NONE) {
+ return rc;
+ }
+
+ return setAdvertisingData();
+ }
+
+ /**
+ * Accumulate an AD structure in the advertising payload. Please note that
+ * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
+ * as an additional 31 bytes if the advertising payload is too
+ * small.
+ *
+ * @param power
+ * The max transmit power to be used by the controller (in dBm).
+ */
+ ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
+ ble_error_t rc;
+ if ((rc = _advPayload.addTxPower(power)) != BLE_ERROR_NONE) {
+ return rc;
+ }
+
+ return setAdvertisingData();
+ }
+
+ /**
+ * Accumulate a variable length byte-stream as an AD structure in the
+ * advertising payload. Please note that the payload is limited to 31 bytes.
+ * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
+ * advertising payload is too small.
+ *
+ * @param type The type describing the variable length data.
+ * @param data Data bytes.
+ * @param len Length of data.
+ */
+ ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
+ if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
+ setDeviceName(data);
+ }
+
+ ble_error_t rc;
+ if ((rc = _advPayload.addData(type, data, len)) != BLE_ERROR_NONE) {
+ return rc;
+ }
+
+ return setAdvertisingData();
+ }
+
+ /**
+ * Update a particular ADV field in the advertising payload (based on
+ * matching type and length). Note: the length of the new data must be the
+ * same as the old one.
+ *
+ * @param[in] type The ADV type field describing the variable length data.
+ * @param[in] data Data bytes.
+ * @param[in] len Length of data.
+ *
+ * @note: If advertisements are enabled, then the update will take effect immediately.
+ *
+ * @return BLE_ERROR_NONE if the advertisement payload was updated based on
+ * a <type, len> match; otherwise, an appropriate error.
+ */
+ ble_error_t updateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
+ if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
+ setDeviceName(data);
+ }
+
+ ble_error_t rc;
+ if ((rc = _advPayload.updateData(type, data, len)) != BLE_ERROR_NONE) {
+ return rc;
+ }
+
+ return setAdvertisingData();
+ }
+
+ /**
+ * Set up a particular, user-constructed advertisement payload for the
+ * underlying stack. It would be uncommon for this API to be used directly;
+ * there are other APIs to build an advertisement payload (see above).
+ */
+ ble_error_t setAdvertisingPayload(const GapAdvertisingData &payload) {
+ _advPayload = payload;
+ return setAdvertisingData();
+ }
+
+ /**
+ * @return Read back advertising data. Useful for storing and
+ * restoring payload.
+ */
+ const GapAdvertisingData &getAdvertisingPayload(void) const {
+ return _advPayload;
+ }
+
+ /**
+ * Accumulate a variable length byte-stream as an AD structure in the
+ * scanResponse payload.
+ *
+ * @param[in] type The type describing the variable length data.
+ * @param[in] data Data bytes.
+ * @param[in] len Length of data.
+ */
+ ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
+ ble_error_t rc;
+ if ((rc = _scanResponse.addData(type, data, len)) != BLE_ERROR_NONE) {
+ return rc;
+ }
+
+ return setAdvertisingData();
+ }
+
+ /**
+ * Reset any scan response prepared from prior calls to
+ * accumulateScanResponse().
+ *
+ * Note: This should be followed by a call to setAdvertisingPayload() or
+ * startAdvertising() before the update takes effect.
+ */
+ void clearScanResponse(void) {
+ _scanResponse.clear();
+ setAdvertisingData();
+ }
+
+ /**
+ * Set up parameters for GAP scanning (observer mode).
+ * @param[in] interval
+ * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
+ * @param[in] window
+ * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
+ * @param[in] timeout
+ * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
+ * @param[in] activeScanning
+ * Set to True if active-scanning is required. This is used to fetch the
+ * scan response from a peer if possible.
+ *
+ * The scanning window divided by the interval determines the duty cycle for
+ * scanning. For example, if the interval is 100ms and the window is 10ms,
+ * then the controller will scan for 10 percent of the time. It is possible
+ * to have the interval and window set to the same value. In this case,
+ * scanning is continuous, with a change of scanning frequency once every
+ * interval.
+ *
+ * Once the scanning parameters have been configured, scanning can be
+ * enabled by using startScan().
+ *
+ * @Note: The scan interval and window are recommendations to the BLE stack.
+ */
+ ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
+ uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
+ uint16_t timeout = 0,
+ bool activeScanning = false) {
+ ble_error_t rc;
+ if (((rc = _scanningParams.setInterval(interval)) == BLE_ERROR_NONE) &&
+ ((rc = _scanningParams.setWindow(window)) == BLE_ERROR_NONE) &&
+ ((rc = _scanningParams.setTimeout(timeout)) == BLE_ERROR_NONE)) {
+ _scanningParams.setActiveScanning(activeScanning);
+ return BLE_ERROR_NONE;
+ }
+
+ return rc;
+ }
+
+ /**
+ * Set up the scanInterval parameter for GAP scanning (observer mode).
+ * @param[in] interval
+ * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
+ *
+ * The scanning window divided by the interval determines the duty cycle for
+ * scanning. For example, if the interval is 100ms and the window is 10ms,
+ * then the controller will scan for 10 percent of the time. It is possible
+ * to have the interval and window set to the same value. In this case,
+ * scanning is continuous, with a change of scanning frequency once every
+ * interval.
+ *
+ * Once the scanning parameters have been configured, scanning can be
+ * enabled by using startScan().
+ */
+ ble_error_t setScanInterval(uint16_t interval) {
+ return _scanningParams.setInterval(interval);
+ }
+
+ /**
+ * Set up the scanWindow parameter for GAP scanning (observer mode).
+ * @param[in] window
+ * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
+ *
+ * The scanning window divided by the interval determines the duty cycle for
+ * scanning. For example, if the interval is 100ms and the window is 10ms,
+ * then the controller will scan for 10 percent of the time. It is possible
+ * to have the interval and window set to the same value. In this case,
+ * scanning is continuous, with a change of scanning frequency once every
+ * interval.
+ *
+ * Once the scanning parameters have been configured, scanning can be
+ * enabled by using startScan().
+ *
+ * If scanning is already active, the updated value of scanWindow will be
+ * propagated to the underlying BLE stack.
+ */
+ ble_error_t setScanWindow(uint16_t window) {
+ ble_error_t rc;
+ if ((rc = _scanningParams.setWindow(window)) != BLE_ERROR_NONE) {
+ return rc;
+ }
+
+ /* If scanning is already active, propagate the new setting to the stack. */
+ if (scanningActive) {
+ return startRadioScan(_scanningParams);
+ }
+
+ return BLE_ERROR_NONE;
+ }
+
+ /**
+ * Set up parameters for GAP scanning (observer mode).
+ * @param[in] timeout
+ * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
+ *
+ * Once the scanning parameters have been configured, scanning can be
+ * enabled by using startScan().
+ *
+ * If scanning is already active, the updated value of scanTimeout will be
+ * propagated to the underlying BLE stack.
+ */
+ ble_error_t setScanTimeout(uint16_t timeout) {
+ ble_error_t rc;
+ if ((rc = _scanningParams.setTimeout(timeout)) != BLE_ERROR_NONE) {
+ return rc;
+ }
+
+ /* If scanning is already active, propagate the new settings to the stack. */
+ if (scanningActive) {
+ return startRadioScan(_scanningParams);
+ }
+
+ return BLE_ERROR_NONE;
+ }
+
+ /**
+ * Set up parameters for GAP scanning (observer mode).
+ * @param[in] activeScanning
+ * Set to True if active-scanning is required. This is used to fetch the
+ * scan response from a peer if possible.
+ *
+ * Once the scanning parameters have been configured, scanning can be
+ * enabled by using startScan().
+ *
+ * If scanning is already in progress, then active-scanning will be enabled
+ * for the underlying BLE stack.
+ */
+ ble_error_t setActiveScanning(bool activeScanning) {
+ _scanningParams.setActiveScanning(activeScanning);
+
+ /* If scanning is already active, propagate the new settings to the stack. */
+ if (scanningActive) {
+ return startRadioScan(_scanningParams);
+ }
+
+ return BLE_ERROR_NONE;
+ }
+
+ /**
+ * Start scanning (Observer Procedure) based on the parameters currently in
+ * effect.
+ *
+ * @param[in] callback
+ * The application-specific callback to be invoked upon
+ * receiving every advertisement report. This can be passed in
+ * as NULL, in which case scanning may not be enabled at all.
+ */
+ ble_error_t startScan(void (*callback)(const AdvertisementCallbackParams_t *params)) {
+ ble_error_t err = BLE_ERROR_NONE;
+ if (callback) {
+ if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
+ scanningActive = true;
+ onAdvertisementReport.attach(callback);
+ }
+ }
+
+ return err;
+ }
+
+ /**
+ * Same as above, but this takes an (object, method) pair for a callback.
+ */
+ template<typename T>
+ ble_error_t startScan(T *object, void (T::*callbackMember)(const AdvertisementCallbackParams_t *params)) {
+ ble_error_t err = BLE_ERROR_NONE;
+ if (object && callbackMember) {
+ if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
+ scanningActive = true;
+ onAdvertisementReport.attach(object, callbackMember);
+ }
+ }
+
+ return err;
+ }
+
+ /**
+ * Initialize radio-notification events to be generated from the stack.
+ * This API doesn't need to be called directly.
+ *
+ * Radio Notification is a feature that enables ACTIVE and INACTIVE
+ * (nACTIVE) signals from the stack that notify the application when the
+ * radio is in use.
+ *
+ * The ACTIVE signal is sent before the radio event starts. The nACTIVE
+ * signal is sent at the end of the radio event. These signals can be used
+ * by the application programmer to synchronize application logic with radio
+ * activity. For example, the ACTIVE signal can be used to shut off external
+ * devices, to manage peak current drawn during periods when the radio is on,
+ * or to trigger sensor data collection for transmission in the Radio Event.
+ *
+ * @return BLE_ERROR_NONE on successful initialization, otherwise an error code.
+ */
+ virtual ble_error_t initRadioNotification(void) {
+ return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
+ }
+
+private:
+ ble_error_t setAdvertisingData(void) {
+ return setAdvertisingData(_advPayload, _scanResponse);
+ }
+
+private:
+ virtual ble_error_t setAdvertisingData(const GapAdvertisingData &advData, const GapAdvertisingData &scanResponse) = 0;
+ virtual ble_error_t startAdvertising(const GapAdvertisingParams &) = 0;
+
+public:
+ /**
+ * Accessors to read back currently active advertising params.
+ */
+ GapAdvertisingParams &getAdvertisingParams(void) {
+ return _advParams;
+ }
+ const GapAdvertisingParams &getAdvertisingParams(void) const {
+ return _advParams;
+ }
+
+ /**
+ * Set up a particular, user-constructed set of advertisement parameters for
+ * the underlying stack. It would be uncommon for this API to be used
+ * directly; there are other APIs to tweak advertisement parameters
+ * individually.
+ */
+ void setAdvertisingParams(const GapAdvertisingParams &newParams) {
+ _advParams = newParams;
+ }
+
+ /* Event callback handlers. */
+public:
+ /**
+ * Set up a callback for timeout events. Refer to TimeoutSource_t for
+ * possible event types.
+ * @note It is possible to unregister callbacks using onTimeout().detach(callback)
+ */
+ void onTimeout(TimeoutEventCallback_t callback) {
+ timeoutCallbackChain.add(callback);
+ }
+
+ /**
+ * @brief provide access to the callchain of timeout event callbacks
+ * It is possible to register callbacks using onTimeout().add(callback);
+ * It is possible to unregister callbacks using onTimeout().detach(callback)
+ * @return The timeout event callbacks chain
+ */
+ TimeoutEventCallbackChain_t& onTimeout() {
+ return timeoutCallbackChain;
+ }
+
+ /**
+ * Append to a chain of callbacks to be invoked upon GAP connection.
+ * @note It is possible to unregister callbacks using onConnection().detach(callback)
+ */
+ void onConnection(ConnectionEventCallback_t callback) {connectionCallChain.add(callback);}
+
+ template<typename T>
+ void onConnection(T *tptr, void (T::*mptr)(const ConnectionCallbackParams_t*)) {connectionCallChain.add(tptr, mptr);}
+
+ /**
+ * @brief provide access to the callchain of connection event callbacks
+ * It is possible to register callbacks using onConnection().add(callback);
+ * It is possible to unregister callbacks using onConnection().detach(callback)
+ * @return The connection event callbacks chain
+ */
+ ConnectionEventCallbackChain_t& onconnection() {
+ return connectionCallChain;
+ }
+
+ /**
+ * Append to a chain of callbacks to be invoked upon GAP disconnection.
+ * @note It is possible to unregister callbacks using onDisconnection().detach(callback)
+ */
+ void onDisconnection(DisconnectionEventCallback_t callback) {disconnectionCallChain.add(callback);}
+
+ template<typename T>
+ void onDisconnection(T *tptr, void (T::*mptr)(const DisconnectionCallbackParams_t*)) {disconnectionCallChain.add(tptr, mptr);}
+
+ /**
+ * @brief provide access to the callchain of disconnection event callbacks
+ * It is possible to register callbacks using onDisconnection().add(callback);
+ * It is possible to unregister callbacks using onDisconnection().detach(callback)
+ * @return The disconnection event callbacks chain
+ */
+ DisconnectionEventCallbackChain_t& onDisconnection() {
+ return disconnectionCallChain;
+ }
+
+ /**
+ * Set the application callback for radio-notification events.
+ *
+ * Radio Notification is a feature that enables ACTIVE and INACTIVE
+ * (nACTIVE) signals from the stack that notify the application when the
+ * radio is in use.
+ *
+ * The ACTIVE signal is sent before the radio event starts. The nACTIVE
+ * signal is sent at the end of the radio event. These signals can be used
+ * by the application programmer to synchronize application logic with radio
+ * activity. For example, the ACTIVE signal can be used to shut off external
+ * devices, to manage peak current drawn during periods when the radio is on,
+ * or to trigger sensor data collection for transmission in the Radio Event.
+ *
+ * @param callback
+ * The application handler to be invoked in response to a radio
+ * ACTIVE/INACTIVE event.
+ *
+ * Or in the other version:
+ *
+ * @param tptr
+ * Pointer to the object of a class defining the member callback
+ * function (mptr).
+ * @param mptr
+ * The member callback (within the context of an object) to be
+ * invoked in response to a radio ACTIVE/INACTIVE event.
+ */
+ void onRadioNotification(void (*callback)(bool param)) {
+ radioNotificationCallback.attach(callback);
+ }
+ template <typename T>
+ void onRadioNotification(T *tptr, void (T::*mptr)(bool)) {
+ radioNotificationCallback.attach(tptr, mptr);
+ }
+
+protected:
+ Gap() :
+ _advParams(),
+ _advPayload(),
+ _scanningParams(),
+ _scanResponse(),
+ state(),
+ scanningActive(false),
+ timeoutCallbackChain(),
+ radioNotificationCallback(),
+ onAdvertisementReport(),
+ connectionCallChain(),
+ disconnectionCallChain() {
+ _advPayload.clear();
+ _scanResponse.clear();
+ }
+
+ /* Entry points for the underlying stack to report events back to the user. */
+public:
+ void processConnectionEvent(Handle_t handle,
+ Role_t role,
+ AddressType_t peerAddrType,
+ const Address_t peerAddr,
+ AddressType_t ownAddrType,
+ const Address_t ownAddr,
+ const ConnectionParams_t *connectionParams) {
+ state.connected = 1;
+ ConnectionCallbackParams_t callbackParams(handle, role, peerAddrType, peerAddr, ownAddrType, ownAddr, connectionParams);
+ connectionCallChain.call(&callbackParams);
+ }
+
+ void processDisconnectionEvent(Handle_t handle, DisconnectionReason_t reason) {
+ state.connected = 0;
+ DisconnectionCallbackParams_t callbackParams(handle, reason);
+ disconnectionCallChain.call(&callbackParams);
+ }
+
+ void processAdvertisementReport(const Address_t peerAddr,
+ int8_t rssi,
+ bool isScanResponse,
+ GapAdvertisingParams::AdvertisingType_t type,
+ uint8_t advertisingDataLen,
+ const uint8_t *advertisingData) {
+ AdvertisementCallbackParams_t params;
+ memcpy(params.peerAddr, peerAddr, ADDR_LEN);
+ params.rssi = rssi;
+ params.isScanResponse = isScanResponse;
+ params.type = type;
+ params.advertisingDataLen = advertisingDataLen;
+ params.advertisingData = advertisingData;
+ onAdvertisementReport.call(¶ms);
+ }
+
+ void processTimeoutEvent(TimeoutSource_t source) {
+ if (timeoutCallbackChain) {
+ timeoutCallbackChain(source);
+ }
+ }
+
+protected:
+ GapAdvertisingParams _advParams;
+ GapAdvertisingData _advPayload;
+ GapScanningParams _scanningParams;
+ GapAdvertisingData _scanResponse;
+
+ GapState_t state;
+ bool scanningActive;
+
+protected:
+ TimeoutEventCallbackChain_t timeoutCallbackChain;
+ RadioNotificationEventCallback_t radioNotificationCallback;
+ AdvertisementReportCallback_t onAdvertisementReport;
+ ConnectionEventCallbackChain_t connectionCallChain;
+ DisconnectionEventCallbackChain_t disconnectionCallChain;
+
+private:
+ /* Disallow copy and assignment. */
+ Gap(const Gap &);
+ Gap& operator=(const Gap &);
+};
+
#endif // ifndef __GAP_H__
\ No newline at end of file