Diff: targets/TARGET_STM/USBHALHost_STM.h

Revision:

8:3e7a33f81048

diff -r 7ebd364a6be5 -r 3e7a33f81048 targets/TARGET_STM/USBHALHost_STM.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_STM/USBHALHost_STM.h	Sat Jan 04 23:30:59 2020 +0000
@@ -0,0 +1,293 @@
+/* Copyright (c) 2017 mbed.org, MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+#ifndef USBHALHOST_STM_H
+#define USBHALHOST_STM_H
+
+#if defined(TARGET_DISCO_F746NG)
+#if (MBED_CONF_TARGET_USB_SPEED == 1) // Defined in json configuration file
+#define TARGET_DISCO_F746NG_HS
+#else
+#define TARGET_DISCO_F746NG_FS
+#endif
+#endif
+
+#if defined(TARGET_DISCO_F746NG_HS) || defined(TARGET_DISCO_F769NI)
+#define USBHAL_IRQn  OTG_HS_IRQn
+#else
+#define USBHAL_IRQn  OTG_FS_IRQn
+#endif
+
+#define HCCA_SIZE sizeof(HCD_HandleTypeDef)
+#define ED_SIZE  sizeof(HCED)
+#define TD_SIZE  sizeof(HCTD)
+
+#define TOTAL_SIZE (HCCA_SIZE + (MAX_ENDPOINT * ED_SIZE) + (MAX_TD * TD_SIZE))
+
+/* STM device FS have 11 channels (definition is for 60 channels) */
+static volatile  uint8_t usb_buf[TOTAL_SIZE];
+
+typedef struct {
+    /* store the request ongoing on each endpoit  */
+    /*  1st field of structure avoid  giving knowledge of all structure to
+     *  endpoint */
+    volatile uint32_t addr[MAX_ENDPOINT];
+    USBHALHost *inst;
+    void (USBHALHost::*deviceConnected)(int hub, int port, bool lowSpeed, USBHostHub *hub_parent);
+    void (USBHALHost::*deviceDisconnected)(int hub, int port, USBHostHub *hub_parent, volatile uint32_t addr);
+    void (USBHALHost::*transferCompleted)(volatile uint32_t addr);
+} USBHALHost_Private_t;
+
+static gpio_t gpio_powerpin;
+
+// NUCLEO_64 boards
+#if defined(TARGET_NUCLEO_F401RE) || \
+    defined(TARGET_NUCLEO_F411RE) || \
+    defined(TARGET_NUCLEO_F446RE) || \
+    defined(TARGET_NUCLEO_L476RG) || \
+    defined(TARGET_NUCLEO_L486RG)
+#define USB_POWER_ON  0
+#define USB_POWER_OFF 1
+#define USB_POWERPIN_CONFIG {__HAL_RCC_GPIOC_CLK_ENABLE();gpio_init_out_ex(&gpio_powerpin, PC_0, USB_POWER_OFF);}
+
+// NUCLEO_144 boards
+#elif defined(TARGET_NUCLEO_F207ZG) || \
+    defined(TARGET_NUCLEO_F412ZG) || \
+    defined(TARGET_NUCLEO_F413ZH) || \
+    defined(TARGET_NUCLEO_F429ZI) || \
+    defined(TARGET_NUCLEO_F439ZI) || \
+    defined(TARGET_NUCLEO_F446ZE) || \
+    defined(TARGET_NUCLEO_F767ZI) || \
+    defined(TARGET_NUCLEO_F746ZG) || \
+    defined(TARGET_NUCLEO_F756ZG) || \
+    defined(TARGET_NUCLEO_F767ZI)
+#define USB_POWER_ON  1
+#define USB_POWER_OFF 0
+#define USB_POWERPIN_CONFIG {__HAL_RCC_GPIOG_CLK_ENABLE();gpio_init_out_ex(&gpio_powerpin, PG_6, USB_POWER_OFF);}
+
+// DISCOVERY boards
+#elif defined(TARGET_DISCO_F413ZH)
+#define USB_POWER_ON  0
+#define USB_POWER_OFF 1
+#define USB_POWERPIN_CONFIG {__HAL_RCC_GPIOG_CLK_ENABLE();gpio_init_out_ex(&gpio_powerpin, PG_8, USB_POWER_OFF);}
+
+#elif defined(TARGET_DISCO_F469NI)
+#define USB_POWER_ON  1
+#define USB_POWER_OFF 0
+#define USB_POWERPIN_CONFIG {__HAL_RCC_GPIOB_CLK_ENABLE();gpio_init_out_ex(&gpio_powerpin, PB_2, USB_POWER_OFF);}
+
+#elif defined(TARGET_DISCO_F746NG_FS)
+#define USB_POWER_ON  0
+#define USB_POWER_OFF 1
+#define USB_POWERPIN_CONFIG {__HAL_RCC_GPIOD_CLK_ENABLE();gpio_init_out_ex(&gpio_powerpin, PD_5, USB_POWER_OFF);}
+
+#elif defined(TARGET_DISCO_F746NG_HS)
+#define USB_POWER_ON  0
+#define USB_POWER_OFF 1
+#define USB_POWERPIN_CONFIG {}
+
+#elif defined(TARGET_DISCO_F769NI)
+#define USB_POWER_ON  0
+#define USB_POWER_OFF 1
+#define USB_POWERPIN_CONFIG {}
+
+#elif defined(TARGET_DISCO_L475VG_IOT01A)
+#define USB_POWER_ON  0
+#define USB_POWER_OFF 1
+#define USB_POWERPIN_CONFIG {__HAL_RCC_GPIOD_CLK_ENABLE();gpio_init_out_ex(&gpio_powerpin, PD_12, USB_POWER_OFF);}
+
+#elif defined(TARGET_DISCO_L476VG)
+#define USB_POWER_ON  0
+#define USB_POWER_OFF 1
+#define USB_POWERPIN_CONFIG {__HAL_RCC_GPIOC_CLK_ENABLE();gpio_init_out_ex(&gpio_powerpin, PC_9, USB_POWER_OFF);}
+
+#else
+#error "USB power pin is not configured !"
+#endif
+
+
+void usb_vbus(uint8_t state)
+{
+    if (gpio_powerpin.reg_set && gpio_powerpin.reg_clr) {
+        if (state == 0) {
+            gpio_write(&gpio_powerpin, USB_POWER_OFF);
+        } else {
+            gpio_write(&gpio_powerpin, USB_POWER_ON);
+        }
+    } else {
+        /* The board does not have GPIO pin to control usb supply */
+    }
+    wait(0.2);
+}
+
+
+USBHALHost::USBHALHost()
+{
+    instHost = this;
+    HCD_HandleTypeDef *hhcd = {0};
+    USBHALHost_Private_t *HALPriv = new (USBHALHost_Private_t);
+
+    memset(HALPriv, 0, sizeof(USBHALHost_Private_t));
+    memInit();
+    memset((void *)usb_hcca, 0, HCCA_SIZE);
+
+    hhcd = (HCD_HandleTypeDef *)usb_hcca;
+    hhcd->pData = (void *)HALPriv;
+
+#if defined(TARGET_DISCO_F746NG_HS) || defined(TARGET_DISCO_F769NI)
+    hhcd->Instance = USB_OTG_HS;
+    hhcd->Init.speed =  HCD_SPEED_HIGH;
+    hhcd->Init.phy_itface = HCD_PHY_ULPI;
+#else
+    hhcd->Instance = USB_OTG_FS;
+    hhcd->Init.speed =  HCD_SPEED_FULL;
+    hhcd->Init.phy_itface = HCD_PHY_EMBEDDED;
+#endif
+
+    hhcd->Init.Host_channels = 11;
+    hhcd->Init.dma_enable = 0; // for now failed with dma
+    hhcd->Init.low_power_enable = 0;
+    hhcd->Init.Sof_enable = 0;
+    hhcd->Init.vbus_sensing_enable = 0;
+    hhcd->Init.use_external_vbus = 1;
+    hhcd->Init.lpm_enable = 0;
+
+    HALPriv->inst = this;
+    HALPriv->deviceConnected = &USBHALHost::deviceConnected;
+    HALPriv->deviceDisconnected = &USBHALHost::deviceDisconnected;
+    HALPriv->transferCompleted = &USBHALHost::transferCompleted;
+
+    for (int i = 0; i < MAX_ENDPOINT; i++) {
+        edBufAlloc[i] = false;
+        HALPriv->addr[i] = (uint32_t) - 1;
+    }
+
+    for (int i = 0; i < MAX_TD; i++) {
+        tdBufAlloc[i] = false;
+    }
+
+    __HAL_RCC_PWR_CLK_ENABLE();
+
+#ifdef TARGET_STM32L4
+    HAL_PWREx_EnableVddUSB();
+#endif
+
+    // Configure USB pins
+#if defined(TARGET_NUCLEO_F401RE) || \
+    defined(TARGET_NUCLEO_F411RE) || \
+    defined(TARGET_NUCLEO_F446RE) || \
+    defined(TARGET_NUCLEO_L476RG) || \
+    defined(TARGET_NUCLEO_L486RG) || \
+    defined(TARGET_NUCLEO_F207ZG) || \
+    defined(TARGET_NUCLEO_F412ZG) || \
+    defined(TARGET_NUCLEO_F413ZH) || \
+    defined(TARGET_NUCLEO_F429ZI) || \
+    defined(TARGET_NUCLEO_F439ZI) || \
+    defined(TARGET_NUCLEO_F446ZE) || \
+    defined(TARGET_NUCLEO_F767ZI) || \
+    defined(TARGET_NUCLEO_F746ZG) || \
+    defined(TARGET_NUCLEO_F756ZG) || \
+    defined(TARGET_NUCLEO_F767ZI) || \
+    defined(TARGET_DISCO_F413ZH) || \
+    defined(TARGET_DISCO_F469NI) || \
+    defined(TARGET_DISCO_L475VG_IOT01A)
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    pin_function(PA_11, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_FS)); // DM
+    pin_function(PA_12, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_FS)); // DP
+    pin_function(PA_10, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)); // ID
+    pin_function(PA_9, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_FS)); // VBUS
+
+#elif defined(TARGET_DISCO_F746NG_FS)
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    pin_function(PA_11, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_FS)); // DM
+    pin_function(PA_12, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_FS)); // DP
+    pin_function(PA_10, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)); // ID
+    __HAL_RCC_GPIOJ_CLK_ENABLE();
+    pin_function(PJ_12, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_FS)); // VBUS
+
+#elif defined(TARGET_DISCO_F746NG_HS)
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    __HAL_RCC_GPIOB_CLK_ENABLE();
+    __HAL_RCC_GPIOC_CLK_ENABLE();
+    __HAL_RCC_GPIOH_CLK_ENABLE();
+    pin_function(PA_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // CLK
+    pin_function(PA_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // D0
+    pin_function(PB_0, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // D1
+    pin_function(PB_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // D2
+    pin_function(PB_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // D3
+    pin_function(PB_10, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // D4
+    pin_function(PB_11, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // D5
+    pin_function(PB_12, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // D6
+    pin_function(PB_13, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // D7
+    pin_function(PC_0, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // STP
+    pin_function(PH_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // NXT
+    pin_function(PC_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // DIR
+
+#elif defined(TARGET_DISCO_F769NI)
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    __HAL_RCC_GPIOB_CLK_ENABLE();
+    __HAL_RCC_GPIOC_CLK_ENABLE();
+    __HAL_RCC_GPIOH_CLK_ENABLE();
+    __HAL_RCC_GPIOI_CLK_ENABLE();
+    pin_function(PA_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // CLK
+    pin_function(PA_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // D0
+    pin_function(PB_0, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // D1
+    pin_function(PB_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // D2
+    pin_function(PB_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // D3
+    pin_function(PB_10, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // D4
+    pin_function(PB_11, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // D5
+    pin_function(PB_12, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // D6
+    pin_function(PB_13, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // D7
+    pin_function(PC_0, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // STP
+    pin_function(PH_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // NXT
+    pin_function(PI_11, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_HS)); // DIR
+
+#elif defined(TARGET_DISCO_L476VG)
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    pin_function(PA_11, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_FS)); // DM
+    pin_function(PA_12, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_FS)); // DP
+    pin_function(PA_10, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)); // ID
+    pin_function(PC_11, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_FS)); // VBUS
+
+#elif defined(TARGET_STEVAL_3DP001V1)
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    pin_function(PA_11, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_FS)); // DM
+    pin_function(PA_12, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_OTG_FS)); // DP
+
+#else
+#error "USB pins are not configured !"
+#endif
+
+    // Configure USB POWER pin
+    USB_POWERPIN_CONFIG;
+
+    // Enable clocks
+    __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+#if defined(TARGET_DISCO_F746NG_HS) || defined(TARGET_DISCO_F769NI)
+    __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE();
+    __HAL_RCC_USB_OTG_HS_CLK_ENABLE();
+#else
+    __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
+#endif
+
+    // Set USB interrupt
+    HAL_NVIC_SetPriority(USBHAL_IRQn, 5, 0);
+    NVIC_SetVector(USBHAL_IRQn, (uint32_t)&_usbisr);
+}
+
+#endif // USBHALHOST_STM_H