Run on TY51822r3 board with ACC sensor (LIS3DH or BMC050)

Dependencies:   BLE_API LIS3DH mbed nRF51822 BMC050 nRF51_LowPwr nRF51_Vdd

Fork of BLE_EddystoneBeacon_Service by Bluetooth Low Energy

Revision:
34:f6d4a699a1ea
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/EddystoneTypes.h	Thu Nov 26 16:36:04 2015 +0000
@@ -0,0 +1,72 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __EDDYSTONETYPES_H__
+#define __EDDYSTONETYPES_H__
+
+#include <stdint.h>
+#include <stddef.h>
+
+#define UUID_URL_BEACON(FIRST, SECOND) {                         \
+        0xee, 0x0c, FIRST, SECOND, 0x87, 0x86, 0x40, 0xba,       \
+        0xab, 0x96, 0x99, 0xb9, 0x1a, 0xc9, 0x81, 0xd8,          \
+}
+
+const uint8_t EDDYSTONE_UUID[] = {0xAA, 0xFE};
+
+const uint8_t UUID_URL_BEACON_SERVICE[]    = UUID_URL_BEACON(0x20, 0x80);
+const uint8_t UUID_LOCK_STATE_CHAR[]       = UUID_URL_BEACON(0x20, 0x81);
+const uint8_t UUID_LOCK_CHAR[]             = UUID_URL_BEACON(0x20, 0x82);
+const uint8_t UUID_UNLOCK_CHAR[]           = UUID_URL_BEACON(0x20, 0x83);
+const uint8_t UUID_URL_DATA_CHAR[]         = UUID_URL_BEACON(0x20, 0x84);
+const uint8_t UUID_FLAGS_CHAR[]            = UUID_URL_BEACON(0x20, 0x85);
+const uint8_t UUID_ADV_POWER_LEVELS_CHAR[] = UUID_URL_BEACON(0x20, 0x86);
+const uint8_t UUID_TX_POWER_MODE_CHAR[]    = UUID_URL_BEACON(0x20, 0x87);
+const uint8_t UUID_BEACON_PERIOD_CHAR[]    = UUID_URL_BEACON(0x20, 0x88);
+const uint8_t UUID_RESET_CHAR[]            = UUID_URL_BEACON(0x20, 0x89);
+
+const char DEVICE_NAME[] = "EDDYSTONE CONFIG";
+
+const char DEFAULT_URL[] = "http://www.mbed.com/";
+
+enum PowerModes {
+    TX_POWER_MODE_LOWEST,
+    TX_POWER_MODE_LOW,
+    TX_POWER_MODE_MEDIUM,
+    TX_POWER_MODE_HIGH,
+    NUM_POWER_MODES
+};
+
+/* 128 bits of lock */
+typedef uint8_t Lock_t[16];
+typedef int8_t PowerLevels_t[NUM_POWER_MODES];
+
+const uint16_t URL_DATA_MAX = 18;
+typedef uint8_t UrlData_t[URL_DATA_MAX];
+
+/* UID Frame Type subfields */
+const size_t UID_NAMESPACEID_SIZE = 10;
+typedef uint8_t UIDNamespaceID_t[UID_NAMESPACEID_SIZE];
+const size_t UID_INSTANCEID_SIZE = 6;
+typedef uint8_t UIDInstanceID_t[UID_INSTANCEID_SIZE];
+
+/* Callbacks for updating BateryVoltage and Temperature */
+typedef uint16_t (*TlmUpdateCallback_t) (uint16_t);
+
+/* Size of Eddystone UUID needed for all frames */
+const uint16_t EDDYSTONE_UUID_SIZE = sizeof(EDDYSTONE_UUID);
+
+#endif /* __EDDYSTONETYPES_H__ */