aci_cmds.h File Reference

Enumerator:

ACI_DEVICE_OUTPUT_POWER_MINUS_18DBM	Output power set to -18dBm.
ACI_DEVICE_OUTPUT_POWER_MINUS_12DBM	Output power set to -12dBm.
ACI_DEVICE_OUTPUT_POWER_MINUS_6DBM	Output power set to -6dBm.
ACI_DEVICE_OUTPUT_POWER_0DBM	Output power set to 0dBm - DEFAULT.
ACI_REASON_TERMINATE	Use this to disconnect (does a terminate request), you need to wait for the "disconnected" event.
ACI_GATT_FORMAT_NONE	No characteristic format available.
ACI_GATT_FORMAT_BOOLEAN	Not Supported.
ACI_GATT_FORMAT_2BIT	Not Supported.
ACI_GATT_FORMAT_NIBBLE	Not Supported.
ACI_GATT_NAMESPACE_BTSIG	Bluetooth SIG.
ACI_BOND_STATUS_SUCCESS	Bonding succeeded.
ACI_BOND_STATUS_FAILED	Bonding failed.
ACI_BOND_STATUS_FAILED_TIMED_OUT	Bonding error: Timeout can occur when link termination is unexpected or did not get connected OR SMP timer expired.
ACI_BOND_STATUS_FAILED_PASSKEY_ENTRY_FAILED	Bonding error: Passkey entry failed.
ACI_BOND_STATUS_FAILED_OOB_UNAVAILABLE	Bonding error: OOB unavailable.
ACI_BOND_STATUS_FAILED_AUTHENTICATION_REQ	Bonding error: Authentication request failed.
ACI_BOND_STATUS_FAILED_CONFIRM_VALUE	Bonding error: Confirm value failed.
ACI_BOND_STATUS_FAILED_PAIRING_UNSUPPORTED	Bonding error: Pairing unsupported.
ACI_BOND_STATUS_FAILED_ENCRYPTION_KEY_SIZE	Bonding error: Invalid encryption key size.
ACI_BOND_STATUS_FAILED_SMP_CMD_UNSUPPORTED	Bonding error: Unsupported SMP command.
ACI_BOND_STATUS_FAILED_UNSPECIFIED_REASON	Bonding error: Unspecified reason.
ACI_BOND_STATUS_FAILED_REPEATED_ATTEMPTS	Bonding error: Too many attempts.
ACI_BOND_STATUS_FAILED_INVALID_PARAMETERS	Bonding error: Invalid parameters.
ACI_STATUS_SUCCESS	Success.
ACI_STATUS_TRANSACTION_CONTINUE	Transaction continuation status.
ACI_STATUS_TRANSACTION_COMPLETE	Transaction completed.
ACI_STATUS_EXTENDED	Extended status, further checks needed.
ACI_STATUS_ERROR_UNKNOWN	Unknown error.
ACI_STATUS_ERROR_INTERNAL	Internal error.
ACI_STATUS_ERROR_CMD_UNKNOWN	Unknown command.
ACI_STATUS_ERROR_DEVICE_STATE_INVALID	Command invalid in the current device state.
ACI_STATUS_ERROR_INVALID_LENGTH	Invalid length.
ACI_STATUS_ERROR_INVALID_PARAMETER	Invalid input parameters.
ACI_STATUS_ERROR_BUSY	Busy.
ACI_STATUS_ERROR_INVALID_DATA	Invalid data format or contents.
ACI_STATUS_ERROR_CRC_MISMATCH	CRC mismatch.
ACI_STATUS_ERROR_UNSUPPORTED_SETUP_FORMAT	Unsupported setup format.
ACI_STATUS_ERROR_INVALID_SEQ_NO	Invalid sequence number during a write dynamic data sequence.
ACI_STATUS_ERROR_SETUP_LOCKED	Setup data is locked and cannot be modified.
ACI_STATUS_ERROR_LOCK_FAILED	Setup error due to lock verification failure.
ACI_STATUS_ERROR_BOND_REQUIRED	Bond required: Local Pipes need bonded/trusted peer.
ACI_STATUS_ERROR_REJECTED	Command rejected as a transaction is still pending.
ACI_STATUS_ERROR_DATA_SIZE	Pipe Error Event : Data size exceeds size specified for pipe : Transmit failed.
ACI_STATUS_ERROR_PIPE_INVALID	Pipe Error Event : Invalid pipe.
ACI_STATUS_ERROR_CREDIT_NOT_AVAILABLE	Pipe Error Event : Credit not available.
ACI_STATUS_ERROR_PEER_ATT_ERROR	Pipe Error Event : Peer device has sent an error on an pipe operation on the remote characteristic.
ACI_STATUS_ERROR_ADVT_TIMEOUT	Connection was not established before the BTLE advertising was stopped.
ACI_STATUS_ERROR_PEER_SMP_ERROR	Peer has triggered a Security Manager Protocol Error.
ACI_STATUS_ERROR_PIPE_TYPE_INVALID	Pipe Error Event : Pipe type invalid for the selected operation.
ACI_STATUS_ERROR_PIPE_STATE_INVALID	Pipe Error Event : Pipe state invalid for the selected operation.
ACI_STATUS_ERROR_INVALID_KEY_SIZE	Invalid key size provided.
ACI_STATUS_ERROR_INVALID_KEY_DATA	Invalid key data provided.
ACI_STATUS_RESERVED_START	Reserved range start.
ACI_STATUS_RESERVED_END	Reserved range end.
ACI_CMD_TEST	Enter test mode.
ACI_CMD_ECHO	Echo (loopback) test command.
ACI_CMD_DTM_CMD	Send a BTLE DTM command to the radio.
ACI_CMD_SLEEP	Put the device to sleep.
ACI_CMD_WAKEUP	Wakeup the device from deep sleep.
ACI_CMD_SETUP	Replace the contents of the internal database with user provided data.
ACI_CMD_READ_DYNAMIC_DATA	Read the portions of memory required to be restored after a power cycle.
ACI_CMD_WRITE_DYNAMIC_DATA	Write back the data retrieved using ACI_CMD_READ_DYNAMIC_DATA.
ACI_CMD_GET_DEVICE_VERSION	Retrieve the device's version information.
ACI_CMD_GET_DEVICE_ADDRESS	Request the Bluetooth address and its type.
ACI_CMD_GET_BATTERY_LEVEL	Request the battery level measured by nRF8001.
ACI_CMD_GET_TEMPERATURE	Request the temperature value measured by nRF8001.
ACI_CMD_SET_LOCAL_DATA	Write to the local Attribute Database.
ACI_CMD_RADIO_RESET	Reset the baseband and radio and go back to idle.
ACI_CMD_CONNECT	Start advertising and wait for a master connection.
ACI_CMD_BOND	Start advertising and wait for a master connection.
ACI_CMD_DISCONNECT	Start advertising and wait for a master connection.
ACI_CMD_SET_TX_POWER	Throttles the Radio transmit power.
ACI_CMD_CHANGE_TIMING	Trigger a connection parameter update.
ACI_CMD_OPEN_REMOTE_PIPE	Open a remote pipe for data reception.
ACI_CMD_SEND_DATA	Transmit data over an open pipe.
ACI_CMD_SEND_DATA_ACK	Send an acknowledgment of received data.
ACI_CMD_REQUEST_DATA	Request data over an open pipe.
ACI_CMD_SEND_DATA_NACK	NACK a data reception.
ACI_CMD_SET_APP_LATENCY	Set application latency.
ACI_CMD_SET_KEY	Set a security key.
ACI_CMD_OPEN_ADV_PIPE	Open Advertising Pipes.
ACI_CMD_BROADCAST	Start non-connectable advertising.
ACI_CMD_BOND_SECURITY_REQUEST	Start a security request in bonding mode.
ACI_CMD_CONNECT_DIRECT	Start Directed advertising towards a Bonded Peer.
ACI_CMD_CLOSE_REMOTE_PIPE	Close a previously opened remote pipe.
ACI_CMD_INVALID	Invalid ACI command opcode.
ACI_EVT_INVALID	Invalid event code.
ACI_EVT_DEVICE_STARTED	Sent every time the device starts.
ACI_EVT_ECHO	Mirrors the ACI_CMD_ECHO.
ACI_EVT_HW_ERROR	Asynchronous hardware error event.
ACI_EVT_CMD_RSP	Event opcode used as a event response for all commands.
ACI_EVT_CONNECTED	Link connected.
ACI_EVT_DISCONNECTED	Link disconnected.
ACI_EVT_BOND_STATUS	Bond completion result.
ACI_EVT_PIPE_STATUS	Pipe bitmap for available pipes.
ACI_EVT_TIMING	Sent to the application when the radio enters a connected state or when the timing of the radio connection changes.
ACI_EVT_DATA_CREDIT	Notification to the application that transmit credits are available.
ACI_EVT_DATA_ACK	Data acknowledgement event.
ACI_EVT_DATA_RECEIVED	Data received notification event.
ACI_EVT_PIPE_ERROR	Error notification event.
ACI_EVT_DISPLAY_PASSKEY	Display Passkey Event.
ACI_EVT_KEY_REQUEST	Security Key request.

Definition at line 41 of file aci_cmds.h.