Diff: Memory/spifi_rom_api.h

Revision:

0:6b68dac0d986

diff -r 000000000000 -r 6b68dac0d986 Memory/spifi_rom_api.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Memory/spifi_rom_api.h	Fri Nov 21 11:42:51 2014 +0000
@@ -0,0 +1,165 @@
+/* definitions for ROM API for SPIFI in NXP MCUs
+   copyright (c) 2010 NXP Semiconductors
+   written by CAM  start                                     4/16/10
+                   first testing                             5/12/10
+                   OK with first SST & Winbond devices       6/8/10
+				   OK with Gigadevice, Numonyx, Atmel, 
+				                              some Macronyx  7/13/10
+				   consensus with BK, performance optimized  8/24/10              
+   this file is largely platform-independent */
+
+#ifndef SPIFI_ROM_API_H
+#define SPIFI_ROM_API_H
+
+
+#define SPIFI_MEM_BASE 0x28000000
+/* allocated size of the SPIFI memory area on this device */
+#define MEM_AREA_SIZE  0x00001000 
+#define SPIFI_ROM_PTR  0x1FFF1FF8
+
+/* define the symbol TESTING in the environment	if test output desired */
+
+/* maintain LONGEST_PROT >= the length (in bytes) of the largest
+	protection block of any serial flash that this driver handles */
+#define LONGEST_PROT 68
+
+/* protection/sector descriptors */
+typedef struct {
+	unsigned base;
+	uint8_t flags;
+	signed char log2;
+	uint16_t rept;
+} protEnt;
+
+typedef union {
+	uint16_t hw;
+	uint8_t byte[2];
+}stat_t;
+
+/* the object that init returns, and other routines use as an operand */
+typedef struct {
+	unsigned base, regbase, devSize, memSize;
+	uint8_t mfger, devType, devID, busy;
+	stat_t stat;
+	uint16_t reserved;
+	uint16_t set_prot, write_prot;
+	unsigned mem_cmd, prog_cmd;
+	uint16_t sectors, protBytes;
+	unsigned opts, errCheck;
+	uint8_t erase_shifts[4], erase_ops[4];
+	protEnt *protEnts;
+	char prot[LONGEST_PROT];
+} SPIFIobj;
+
+/* operands of program and erase */
+typedef struct {
+    char *dest;			/* starting address for programming or erasing */
+    unsigned length;	/* number of bytes to be programmed or erased */
+    char *scratch;		/* address of work area or NULL */
+    int protect;		/* protection to apply after programming/erasing is done */
+    unsigned options;	/* see the table below */
+} SPIFIopers;
+
+
+/* bits in options operands (MODE3, RCVCLK, and FULLCLK 
+	have the same relationship as in the Control register) */
+#define S_MODE3 1
+#define S_MODE0 0
+#define S_MINIMAL 2
+#define S_MAXIMAL 0
+#define S_FORCE_ERASE 4
+#define S_ERASE_NOT_REQD 8
+#define S_CALLER_ERASE 8
+#define S_ERASE_AS_REQD 0
+#define S_VERIFY_PROG 0x10
+#define S_VERIFY_ERASE 0x20
+#define S_NO_VERIFY 0
+#define S_RCVCLK 0x80
+#define S_INTCLK 0
+#define S_FULLCLK 0x40
+#define S_HALFCLK 0
+#define S_DUAL 0x100
+#define S_CALLER_PROT 0x200
+#define S_DRIVER_PROT 0
+
+/* the length of a standard	program command is 256 on all devices */
+#define PROG_SIZE 256
+
+/* interface to ROM API */
+typedef struct {
+  int (*spifi_init)      (SPIFIobj *obj, unsigned csHigh, unsigned options, 
+                          unsigned mhz);
+  int (*spifi_program)   (SPIFIobj *obj, char *source, SPIFIopers *opers);
+  int (*spifi_erase)     (SPIFIobj *obj, SPIFIopers *opers);
+  /* mode switching */
+  void (*cancel_mem_mode)(SPIFIobj *obj);
+  void (*set_mem_mode)   (SPIFIobj *obj);
+
+  /* mid level functions */
+  int (*checkAd)         (SPIFIobj *obj, SPIFIopers *opers);
+  int (*setProt)         (SPIFIobj *obj, SPIFIopers *opers, char *change, 
+                          char *saveProt);
+  int (*check_block)     (SPIFIobj *obj, char *source, SPIFIopers *opers, 
+                          unsigned check_program);
+  int (*send_erase_cmd)  (SPIFIobj *obj, unsigned char op, unsigned addr);
+  unsigned (*ck_erase)   (SPIFIobj *obj, unsigned *addr, unsigned length);
+  int (*prog_block)      (SPIFIobj *obj, char *source, SPIFIopers *opers, 
+                          unsigned *left_in_page);
+  unsigned (*ck_prog)    (SPIFIobj *obj, char *source, char *dest, unsigned length);
+
+  /* low level functions */
+  void(*setSize)         (SPIFIobj *obj, int value);
+  int (*setDev)          (SPIFIobj *obj, unsigned opts, unsigned mem_cmd, 
+                          unsigned prog_cmd);
+  unsigned (*cmd)        (uint8_t op, uint8_t addrLen, uint8_t intLen, unsigned short len);
+  unsigned (*readAd)     (SPIFIobj *obj, unsigned cmd, unsigned addr);
+  void (*send04)         (SPIFIobj *obj, uint8_t op, uint8_t len, unsigned value);
+  void (*wren_sendAd)    (SPIFIobj *obj, unsigned cmd, unsigned addr, unsigned value);
+  int (*write_stat)      (SPIFIobj *obj, uint8_t len, uint16_t value);
+  int (*wait_busy)       (SPIFIobj *obj, uint8_t prog_or_erase);
+} SPIFI_RTNS;
+
+//#define define_spifi_romPtr(name) const SPIFI_RTNS *name=*((SPIFI_RTNS **)SPIFI_ROM_PTR)
+
+/* example of using this interface:
+#include "spifi_rom_api.h"
+#define CSHIGH 4
+#define SPIFI_MHZ 80
+#define source_data_ad (char *)1234
+
+	int rc;
+	SPIFIopers opers;
+
+	define_spifi_romPtr(spifi);
+	SPIFIobj *obj = malloc(sizeof(SPIFIobj));
+	if (!obj) { can't allocate memory }
+
+	rc = spifi->spifi_init (obj, CSHIGH, S_FULLCLK+S_RCVCLK, SPIFI_MHZ);
+	if (rc) { investigate init error rc }
+	printf ("the serial flash contains %d bytes\n", obj->devSize);
+
+	opers.dest = where_to_program;
+	opers.length = how_many_bytes;
+	opers.scratch = NULL;			// unprogrammed data is not saved/restored
+	opers.protect = -1;				// save & restore protection
+	opers.options = S_VERIFY_PROG;
+
+	rc = spifi->spifi_program (obj, source_data_ad, &opers);
+	if (rc) { investigate program error rc }
+*/
+
+/* these are for normal users, including boot code */
+int spifi_init (SPIFIobj *obj, unsigned csHigh, unsigned options, unsigned mhz);
+int spifi_program (SPIFIobj *obj, char *source, SPIFIopers *opers);
+int spifi_erase (SPIFIobj *obj, SPIFIopers *opers);
+
+/* these are used by the manufacturer-specific init functions */
+void setSize (SPIFIobj *obj, int value);
+int setDev (SPIFIobj *obj, unsigned opts, unsigned mem_cmd, unsigned prog_cmd);
+unsigned read04(SPIFIobj *obj, uint8_t op, uint8_t len);
+int write_stat (SPIFIobj *obj, uint8_t len, uint16_t value);
+void setProtEnts(SPIFIobj *obj, const protEnt *p, unsigned protTabLen);
+
+#endif
+
+