Jie Li / Mbed 2 deprecated BLE_HeartRate

Heart Rate Monitor example for the BLE API using nRF51822 native mode drivers

Dependencies:   BLE_API mbed nRF51822 X_NUCLEO_IDB0XA1

Fork of BLE_HeartRate by Bluetooth Low Energy

Diff: main.cpp

Revision:
65:cb76569f74f6
Parent:
56:83623419d5e4
Child:
66:c09ddf226b9c
--- a/main.cpp	Mon Jun 08 10:02:17 2015 +0000
+++ b/main.cpp	Sat Jun 20 00:03:36 2015 +0000
@@ -15,7 +15,7 @@
  */
 
 #include "mbed.h"
-#include "BLEDevice.h"
+#include "BLE.h"
 #include "HeartRateService.h"
 #include "DeviceInformationService.h"
 
@@ -54,7 +54,7 @@
     ticker.attach(periodicCallback, 1); // blink LED every second
 
     ble.init();
-    ble.onDisconnection(disconnectionCallback);
+    ble.gap().onDisconnection(disconnectionCallback);
 
     /* Setup primary service. */
     uint8_t hrmCounter = 100; // init HRM to 100bps
@@ -64,13 +64,13 @@
     DeviceInformationService deviceInfo(ble, "ARM", "Model1", "SN1", "hw-rev1", "fw-rev1", "soft-rev1");
 
     /* Setup advertising. */
-    ble.accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED | GapAdvertisingData::LE_GENERAL_DISCOVERABLE);
-    ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_16BIT_SERVICE_IDS, (uint8_t *)uuid16_list, sizeof(uuid16_list));
-    ble.accumulateAdvertisingPayload(GapAdvertisingData::GENERIC_HEART_RATE_SENSOR);
-    ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LOCAL_NAME, (uint8_t *)DEVICE_NAME, sizeof(DEVICE_NAME));
-    ble.setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED);
-    ble.setAdvertisingInterval(1000);
-    ble.startAdvertising();
+    ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED | GapAdvertisingData::LE_GENERAL_DISCOVERABLE);
+    ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_16BIT_SERVICE_IDS, (uint8_t *)uuid16_list, sizeof(uuid16_list));
+    ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::GENERIC_HEART_RATE_SENSOR);
+    ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LOCAL_NAME, (uint8_t *)DEVICE_NAME, sizeof(DEVICE_NAME));
+    ble.gap().setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED);
+    ble.gap().setAdvertisingInterval(1000);
+    ble.gap().startAdvertising();
 
     // infinite loop
     while (1) {