File content as of revision 5:ace99c9d0e4e:

#!/bin/bash

echo off

MBED_SYS_PATH=~/src/arm/sys
LIB_PATH=~/src/arm/lib
OS=6
PROF=DEBUG
PROJ_NAME=${PWD##*/}
PORT=/dev/ttyACM0

#MCU="$1"
#shift # past argument

MACROS=()
SRC_LIB_PATH=()
while [[ $# -gt 0 ]]
do
key="$1"

case $key in
    all)
    FLASH='-f'
    shift # past argument
    ;;
    -f)
    FLASH='-f'
    shift # past argument
    ;;
    -c|clean)
    CLEAN='-c'
    shift # past argument
    ;;
    -D|--macro)
    MACROS+=('-D '$2)
    shift # past argument
    shift # past value
    ;;
    -l)
    SRC_LIB_PATH+=' --source '${LIB_PATH}/$2
    shift # past argument
    shift # past value
    ;;
    -m)
    MCU="$2"
    shift # past argument
    shift # past value
    ;;
    -os)
    OS="$2"
    shift # past argument
    shift # past value
    ;;
    -p|--port)
    PORT="$2"
    shift # past argument
    shift # past value
    ;;
    -r|--release)
    PROF=RELEASE
    shift # past argument
    ;;
    *)    # additional args
    ARGS+=("$key $2")
    shift # past argument
    ;;
esac
done

if [ ${OS} == 2 ]
then
	GCC_ARM_PATH=/opt/gcc-arm-none-eabi-6-2017-q2-update
	MBED_OS_PATH=${MBED_SYS_PATH}/mbed
	CUSTOM_TARGETS_PATH=${MBED_SYS_PATH}/custom_targets/mbed
	PROFILE=debug
	if [ ${PROF} == RELEASE ]
	then
		PROFILE=release
	fi
else
	GCC_ARM_PATH=/opt/gcc-arm-none-eabi-9-2019-q4-major
	MBED_OS_PATH=${MBED_SYS_PATH}/mbed-os
	CUSTOM_TARGETS_PATH=${MBED_SYS_PATH}/custom_targets/mbed-os
	PROFILE=${MBED_SYS_PATH}/mbed-os/tools/profiles/debug.json
	if [ ${PROF} == RELEASE ]
	then
		PROFILE=${MBED_SYS_PATH}/mbed-os/tools/profiles/release.json
	fi
fi

mbed config -G GCC_ARM_PATH ${GCC_ARM_PATH}/bin
mbed config -G MBED_OS_DIR ${MBED_OS_PATH}
if ! [ -f ./.mbed ]
then
    mbed new .
fi
mbed export -i qtcreator -m ${MCU} --source . --source ${CUSTOM_TARGETS_PATH} --source ${MBED_OS_PATH} --source ${GCC_ARM_PATH}/arm-none-eabi/include ${SRC_LIB_PATH}
#mbed export -i vscode_gcc_arm -m ${MCU} --source . --source ${CUSTOM_TARGETS_PATH} --source ${MBED_OS_PATH} --source ${GCC_ARM_PATH}/arm-none-eabi/include ${SRC_LIB_PATH}
mbed compile -t GCC_ARM -m ${MCU} ${ARGS} --source . --source ${CUSTOM_TARGETS_PATH} --source ${MBED_OS_PATH} ${SRC_LIB_PATH} $CLEAN --profile ${PROFILE}

#if [ "${MCU}" == "LPC1768DBG" ]
#then
#	${GCC_ARM_PATH}/bin/arm-none-eabi-objcopy -I binary -O ihex ./BUILD/${MCU}/GCC_ARM-${PROF}/${PROJ_NAME}.bin ./BUILD/${MCU}/GCC_ARM-${PROF}/${PROJ_NAME}.hex
#fi

if [ "${FLASH}" == "-f" ]
then
	case ${MCU} in
    	LPC1768)
    		MCU_CFG="pyOCD"
    		;;
    	LPC1768DBG)
    		MCU_CFG="pyOCD"
    		;;
    	BLUEPILL|MAPLE_MINI|NUCLEO_F103RB|STM32F103RC|STM32F103VE)
    		MCU_CFG="/usr/local/share/openocd/scripts/board/st_nucleo_f103rb.cfg"
    		;;
    	NUCLEO_F446RE|STM32F407VE)
    		MCU_CFG="/usr/local/share/openocd/scripts/board/st_nucleo_f4.cfg"
    		;;
    	NUCLEO_F767ZI)
    		MCU_CFG="/usr/local/share/openocd/scripts/board/stm32f7discovery.cfg"
    		;;
    	*)
    		MCU_CFG="not_supported" 
    		echo "No support to flash "${MCU}
    		;;
	esac
	if [ "$MCU_CFG" != "not_supported" ]
	then
		echo "Flashing the "${MCU}" ..."
		case ${MCU_CFG} in
			pyOCD)
				if [ "$PORT" == "/dev/ttyACM0" ]
				then
    				~/.local/bin/pyocd-flashtool -t lpc1768 ./BUILD/${MCU}/GCC_ARM-${PROF}/${PROJ_NAME}.bin
    				#~/.local/bin/pyocd-flashtool -t lpc1768 ./BUILD/${MCU}/GCC_ARM-${PROF}/${PROJ_NAME}.bin > /dev/null 2>&1
    			else
    				lpc21isp -bin ./BUILD/${MCU}/GCC_ARM-${PROF}/${PROJ_NAME}.bin ${PORT} 115200 96000
    			fi
    			;;
			*)
  				openocd -f ${MCU_CFG} -c """program ./BUILD/${MCU}/GCC_ARM-${PROF}/${PROJ_NAME}.elf verify reset exit"""
  				#openocd -f ${MCU_CFG} -c """program ./BUILD/${MCU}/GCC_ARM-${PROF}/${PROJ_NAME}.elf verify reset exit""" > /dev/null 2>&1
  				;;
  		esac
  		echo "Done"
  	fi
fi