Zoltan Hudak
/
QtCreator_Support
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Diff: mbed.bat
- Revision:
- 5:ace99c9d0e4e
- Parent:
- 0:e5c84595673c
- Child:
- 6:f3529afba368
--- a/mbed.bat Fri Aug 14 07:07:59 2020 +0000
+++ b/mbed.bat Sun Aug 16 10:08:01 2020 +0000
@@ -1,151 +1,151 @@
-#!/bin/bash
-
-echo off
-
-MBED_SYS_PATH=~/src/arm/sys
-LIB_PATH=~/src/arm/lib
-OS=6
-PROF=DEBUG
-PROJ_NAME=${PWD##*/}
-PORT=/dev/ttyACM0
-
-#MCU="$1"
-#shift # past argument
-
-MACROS=()
-SRC_LIB_PATH=()
-while [[ $# -gt 0 ]]
-do
-key="$1"
-
-case $key in
- all)
- FLASH='-f'
- shift # past argument
- ;;
- -f)
- FLASH='-f'
- shift # past argument
- ;;
- -c|clean)
- CLEAN='-c'
- shift # past argument
- ;;
- -D|--macro)
- MACROS+=('-D '$2)
- shift # past argument
- shift # past value
- ;;
- -l)
- SRC_LIB_PATH+=' --source '${LIB_PATH}/$2
- shift # past argument
- shift # past value
- ;;
- -m)
- MCU="$2"
- shift # past argument
- shift # past value
- ;;
- -os)
- OS="$2"
- shift # past argument
- shift # past value
- ;;
- -p|--port)
- PORT="$2"
- shift # past argument
- shift # past value
- ;;
- -r|--release)
- PROF=RELEASE
- shift # past argument
- ;;
- *) # additional args
- ARGS+=("$key $2")
- shift # past argument
- ;;
-esac
-done
-
-if [ ${OS} == 2 ]
-then
- GCC_ARM_PATH=/opt/gcc-arm-none-eabi-6-2017-q2-update
- MBED_OS_PATH=${MBED_SYS_PATH}/mbed
- CUSTOM_TARGETS_PATH=${MBED_SYS_PATH}/custom_targets/mbed
- PROFILE=debug
- if [ ${PROF} == RELEASE ]
- then
- PROFILE=release
- fi
-else
- GCC_ARM_PATH=/opt/gcc-arm-none-eabi-9-2019-q4-major
- MBED_OS_PATH=${MBED_SYS_PATH}/mbed-os
- CUSTOM_TARGETS_PATH=${MBED_SYS_PATH}/custom_targets/mbed-os
- PROFILE=${MBED_SYS_PATH}/mbed-os/tools/profiles/debug.json
- if [ ${PROF} == RELEASE ]
- then
- PROFILE=${MBED_SYS_PATH}/mbed-os/tools/profiles/release.json
- fi
-fi
-
-mbed config -G GCC_ARM_PATH ${GCC_ARM_PATH}/bin
-mbed config -G MBED_OS_DIR ${MBED_OS_PATH}
-if ! [ -f ./.mbed ]
-then
- mbed new .
-fi
-mbed export -i qtcreator -m ${MCU} --source . --source ${CUSTOM_TARGETS_PATH} --source ${MBED_OS_PATH} --source ${GCC_ARM_PATH}/arm-none-eabi/include ${SRC_LIB_PATH}
-#mbed export -i vscode_gcc_arm -m ${MCU} --source . --source ${CUSTOM_TARGETS_PATH} --source ${MBED_OS_PATH} --source ${GCC_ARM_PATH}/arm-none-eabi/include ${SRC_LIB_PATH}
-mbed compile -t GCC_ARM -m ${MCU} ${ARGS} --source . --source ${CUSTOM_TARGETS_PATH} --source ${MBED_OS_PATH} ${SRC_LIB_PATH} $CLEAN --profile ${PROFILE}
-
-#if [ "${MCU}" == "LPC1768X" ]
-#then
-# ${GCC_ARM_PATH}/bin/arm-none-eabi-objcopy -I binary -O ihex ./BUILD/${MCU}/GCC_ARM-${PROF}/${PROJ_NAME}.bin ./BUILD/${MCU}/GCC_ARM-${PROF}/${PROJ_NAME}.hex
-#fi
-
-if [ "${FLASH}" == "-f" ]
-then
- case ${MCU} in
- LPC1768)
- MCU_CFG="pyOCD"
- ;;
- LPC1768X)
- MCU_CFG="pyOCD"
- ;;
- BLUEPILL|MAPLE_MINI|NUCLEO_F103RB|STM32F103RC|STM32F103VE)
- MCU_CFG="/usr/local/share/openocd/scripts/board/st_nucleo_f103rb.cfg"
- ;;
- NUCLEO_F446RE|STM32F407VE)
- MCU_CFG="/usr/local/share/openocd/scripts/board/st_nucleo_f4.cfg"
- ;;
- NUCLEO_F767ZI)
- MCU_CFG="/usr/local/share/openocd/scripts/board/stm32f7discovery.cfg"
- ;;
- *)
- MCU_CFG="not_supported"
- echo "No support to flash "${MCU}
- ;;
- esac
- if [ "$MCU_CFG" != "not_supported" ]
- then
- echo "Flashing the "${MCU}" ..."
- case ${MCU_CFG} in
- pyOCD)
- if [ "$PORT" == "/dev/ttyACM0" ]
- then
- ~/.local/bin/pyocd-flashtool -t lpc1768 ./BUILD/${MCU}/GCC_ARM-${PROF}/${PROJ_NAME}.bin
- #~/.local/bin/pyocd-flashtool -t lpc1768 ./BUILD/${MCU}/GCC_ARM-${PROF}/${PROJ_NAME}.bin > /dev/null 2>&1
- else
- lpc21isp -bin ./BUILD/${MCU}/GCC_ARM-${PROF}/${PROJ_NAME}.bin ${PORT} 115200 96000
- fi
- ;;
- *)
- openocd -f ${MCU_CFG} -c """program ./BUILD/${MCU}/GCC_ARM-${PROF}/${PROJ_NAME}.elf verify reset exit"""
- #openocd -f ${MCU_CFG} -c """program ./BUILD/${MCU}/GCC_ARM-${PROF}/${PROJ_NAME}.elf verify reset exit""" > /dev/null 2>&1
- ;;
- esac
- echo "Done"
- fi
-fi
-
+#!/bin/bash
+
+echo off
+
+MBED_SYS_PATH=~/src/arm/sys
+LIB_PATH=~/src/arm/lib
+OS=6
+PROF=DEBUG
+PROJ_NAME=${PWD##*/}
+PORT=/dev/ttyACM0
+
+#MCU="$1"
+#shift # past argument
+
+MACROS=()
+SRC_LIB_PATH=()
+while [[ $# -gt 0 ]]
+do
+key="$1"
+
+case $key in
+ all)
+ FLASH='-f'
+ shift # past argument
+ ;;
+ -f)
+ FLASH='-f'
+ shift # past argument
+ ;;
+ -c|clean)
+ CLEAN='-c'
+ shift # past argument
+ ;;
+ -D|--macro)
+ MACROS+=('-D '$2)
+ shift # past argument
+ shift # past value
+ ;;
+ -l)
+ SRC_LIB_PATH+=' --source '${LIB_PATH}/$2
+ shift # past argument
+ shift # past value
+ ;;
+ -m)
+ MCU="$2"
+ shift # past argument
+ shift # past value
+ ;;
+ -os)
+ OS="$2"
+ shift # past argument
+ shift # past value
+ ;;
+ -p|--port)
+ PORT="$2"
+ shift # past argument
+ shift # past value
+ ;;
+ -r|--release)
+ PROF=RELEASE
+ shift # past argument
+ ;;
+ *) # additional args
+ ARGS+=("$key $2")
+ shift # past argument
+ ;;
+esac
+done
+if [ ${OS} == 2 ]
+then
+ GCC_ARM_PATH=/opt/gcc-arm-none-eabi-6-2017-q2-update
+ MBED_OS_PATH=${MBED_SYS_PATH}/mbed
+ CUSTOM_TARGETS_PATH=${MBED_SYS_PATH}/custom_targets/mbed
+ PROFILE=debug
+ if [ ${PROF} == RELEASE ]
+ then
+ PROFILE=release
+ fi
+else
+ GCC_ARM_PATH=/opt/gcc-arm-none-eabi-9-2019-q4-major
+ MBED_OS_PATH=${MBED_SYS_PATH}/mbed-os
+ CUSTOM_TARGETS_PATH=${MBED_SYS_PATH}/custom_targets/mbed-os
+ PROFILE=${MBED_SYS_PATH}/mbed-os/tools/profiles/debug.json
+ if [ ${PROF} == RELEASE ]
+ then
+ PROFILE=${MBED_SYS_PATH}/mbed-os/tools/profiles/release.json
+ fi
+fi
+
+mbed config -G GCC_ARM_PATH ${GCC_ARM_PATH}/bin
+mbed config -G MBED_OS_DIR ${MBED_OS_PATH}
+if ! [ -f ./.mbed ]
+then
+ mbed new .
+fi
+mbed export -i qtcreator -m ${MCU} --source . --source ${CUSTOM_TARGETS_PATH} --source ${MBED_OS_PATH} --source ${GCC_ARM_PATH}/arm-none-eabi/include ${SRC_LIB_PATH}
+#mbed export -i vscode_gcc_arm -m ${MCU} --source . --source ${CUSTOM_TARGETS_PATH} --source ${MBED_OS_PATH} --source ${GCC_ARM_PATH}/arm-none-eabi/include ${SRC_LIB_PATH}
+mbed compile -t GCC_ARM -m ${MCU} ${ARGS} --source . --source ${CUSTOM_TARGETS_PATH} --source ${MBED_OS_PATH} ${SRC_LIB_PATH} $CLEAN --profile ${PROFILE}
+
+#if [ "${MCU}" == "LPC1768DBG" ]
+#then
+# ${GCC_ARM_PATH}/bin/arm-none-eabi-objcopy -I binary -O ihex ./BUILD/${MCU}/GCC_ARM-${PROF}/${PROJ_NAME}.bin ./BUILD/${MCU}/GCC_ARM-${PROF}/${PROJ_NAME}.hex
+#fi
+
+if [ "${FLASH}" == "-f" ]
+then
+ case ${MCU} in
+ LPC1768)
+ MCU_CFG="pyOCD"
+ ;;
+ LPC1768DBG)
+ MCU_CFG="pyOCD"
+ ;;
+ BLUEPILL|MAPLE_MINI|NUCLEO_F103RB|STM32F103RC|STM32F103VE)
+ MCU_CFG="/usr/local/share/openocd/scripts/board/st_nucleo_f103rb.cfg"
+ ;;
+ NUCLEO_F446RE|STM32F407VE)
+ MCU_CFG="/usr/local/share/openocd/scripts/board/st_nucleo_f4.cfg"
+ ;;
+ NUCLEO_F767ZI)
+ MCU_CFG="/usr/local/share/openocd/scripts/board/stm32f7discovery.cfg"
+ ;;
+ *)
+ MCU_CFG="not_supported"
+ echo "No support to flash "${MCU}
+ ;;
+ esac
+ if [ "$MCU_CFG" != "not_supported" ]
+ then
+ echo "Flashing the "${MCU}" ..."
+ case ${MCU_CFG} in
+ pyOCD)
+ if [ "$PORT" == "/dev/ttyACM0" ]
+ then
+ ~/.local/bin/pyocd-flashtool -t lpc1768 ./BUILD/${MCU}/GCC_ARM-${PROF}/${PROJ_NAME}.bin
+ #~/.local/bin/pyocd-flashtool -t lpc1768 ./BUILD/${MCU}/GCC_ARM-${PROF}/${PROJ_NAME}.bin > /dev/null 2>&1
+ else
+ lpc21isp -bin ./BUILD/${MCU}/GCC_ARM-${PROF}/${PROJ_NAME}.bin ${PORT} 115200 96000
+ fi
+ ;;
+ *)
+ openocd -f ${MCU_CFG} -c """program ./BUILD/${MCU}/GCC_ARM-${PROF}/${PROJ_NAME}.elf verify reset exit"""
+ #openocd -f ${MCU_CFG} -c """program ./BUILD/${MCU}/GCC_ARM-${PROF}/${PROJ_NAME}.elf verify reset exit""" > /dev/null 2>&1
+ ;;
+ esac
+ echo "Done"
+ fi
+fi
+
+