Mike Moore / mmSPI-2

This is an involuntary fork, created because the repository would not update mmSPI. SPI library used to communicate with an altera development board attached to four zigbee-header pins.

Dependents:   Embedded_RTOS_Project

Fork of mmSPI by Mike Moore

Diff: mmSPI.cpp

Revision:
20:2d5cd38047ca
Parent:
19:c2b753533b93
Child:
21:e90dd0f8aaa1
--- a/mmSPI.cpp	Mon Aug 19 23:05:29 2013 +0000
+++ b/mmSPI.cpp	Mon Aug 19 23:14:36 2013 +0000
@@ -306,20 +306,18 @@
                                                 // R2 <- high-data.
                                                 // R1 <- low-data.
       write_register(0x03,cAddress, pcReceive, pcSend); 
-      read_register(0x03,pcReceive,pcSend);
-      
-  //    write_register(0x04,cHData,   pcReceive, pcSend);
-  //    write_register(0x05,cLdata,   pcReceive, pcSend);
+      write_register(0x02,cHData,   pcReceive, pcSend);
+      write_register(0x01,cLdata,   pcReceive, pcSend);
   
-//      pcSend[7] = 0x02;                         // write-enable high.
-//      pcSend[1] = 0x02;
- //     pcSend[0] = 0x00;
- //     transceive_vector2(pcReceive, pcSend, 8);
+      pcSend[7] = 0x00;                         // write-enable high.
+      pcSend[1] = 0x02;
+      pcSend[0] = 0x00;
+      transceive_vector2(pcReceive, pcSend, 8);
       
-//      pcSend[7] = 0x02;                         // write-enable low.
-//      pcSend[1] = 0x00;
- //     pcSend[0] = 0x00;
- //     transceive_vector2(pcReceive, pcSend, 8);   
+      pcSend[7] = 0x00;                         // write-enable low.
+      pcSend[1] = 0x00;
+      pcSend[0] = 0x00;
+      transceive_vector2(pcReceive, pcSend, 8);   
       
                                                 // clear transmit vector.
       for (dLoop = 0; dLoop < 8; dLoop++) pcSend[dLoop] = 0x00; 
@@ -354,18 +352,18 @@
       write_register(0x03,cAddress, pcReceive, pcSend);
       
       pcSend[7] = 0x02;                         // mbed sends command.
-      pcSend[1] = 0xD0;                         // R2 <- MM[R3]
+      pcSend[1] = 0xC8;                         // R2 <- MM[R3]
       pcSend[0] = 0x00;
       transceive_vector2(pcReceive, pcSend, 8); // send command. 
       
       pcSend[7] = 0x02;                         // mbed sends command.
-      pcSend[1] = 0xD1;                         // R1 <- MM[R3]
+      pcSend[1] = 0xC4;                         // R1 <- MM[R3]
       pcSend[0] = 0x00;
       transceive_vector2(pcReceive, pcSend, 8); // send command.      
            
                                                 // obtain MM content.
-      cHData = read_register(0x04, pcReceive, pcSend);  
-      cLData = read_register(0x05, pcReceive, pcSend);    
+      cHData = read_register(0x02, pcReceive, pcSend);  
+      cLData = read_register(0x01, pcReceive, pcSend);    
     
                                                 
       udMemoryContent = (cHData << 8) + cLData; // build the memory word.