CC3000 Wi-Fi module library¶

Info¶

This is the low level driver for TI's SimpleLink CC3000 device.

Differences with TI's original code¶

The code functionality stays exactly the same.
In order to make it easier to use the code, following changes were made :

• Addition of a GlobalAssigns.h file containing defines for all low level I/O and conditional compiler controls.
  
• The SPI and HCI code are joined into one file.
• The include list has been rearranged - Only #include "wlan.h" is needed in the user API.
  
• Part of the CC3000's user eeprom memory is used to store additional info (52 bytes in NVMEM_USER_FILE_1):
  • 1 byte for the First time config parameter (Useful when connecting).
  • 2 bytes for the PatchProgrammer version.
  • 2 bytes for the Service Pack version (used in the PatchProgrammer code).
  • 3 bytes for the Driver Version (used in the PatchProgrammer code).
  • 3 bytes for the Firmware Version (used in the PatchProgrammer code).
  • 1 byte for CIK validation.
  • 40 bytes for the CIK data (Client Interface Key - used with the exosite).

Using the Library¶

A user API is needed to access the CC3000 functions.
The PatchProgrammer code is an example of how the user API is implemented.

API documentation¶

Due to a little problem with the links on the mbed site, the API documentation is not directly accessible (will be solved in a next release).
Currently, it is only accessible by adding modules.html to the API doc link: http://mbed.org/users/frankvnk/code/CC3000_Hostdriver/docs/tip/modules.html