fsdfsdf

Fork of BSP_DISCO_F469NI by ST

Revision:
2:123b894b49dd
Parent:
1:9e4eb47092ed
--- a/Components/ft6x06/ft6x06.h	Mon May 30 11:09:05 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,467 +0,0 @@
-/**
- ******************************************************************************
- * @file    ft6x06.h
- * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    03-August-2015
- * @brief   This file contains all the functions prototypes for the
- *          ft6x06.c IO expander driver.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __FT6X06_H
-#define __FT6X06_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Set Multi-touch as non supported */
-#ifndef TS_MULTI_TOUCH_SUPPORTED
-  #define TS_MULTI_TOUCH_SUPPORTED 0
-#endif
-
-/* Set Auto-calibration as non supported */  
-#ifndef TS_AUTO_CALIBRATION_SUPPORTED
-  #define TS_AUTO_CALIBRATION_SUPPORTED 0
-#endif
-  
-/* Includes ------------------------------------------------------------------*/
-#include "../Common/ts.h"
-
-/* Macros --------------------------------------------------------------------*/
-
-/** @typedef ft6x06_handle_TypeDef
- *  ft6x06 Handle definition.
- */
-typedef struct
-{
-  uint8_t i2cInitialized;
-
-  /* field holding the current number of simultaneous active touches */
-  uint8_t currActiveTouchNb;
-
-  /* field holding the touch index currently managed */
-  uint8_t currActiveTouchIdx;
-
-} ft6x06_handle_TypeDef;
-
-  /** @addtogroup BSP
-   * @{
-   */
-
-  /** @addtogroup Component
-   * @{
-   */
-
-  /** @defgroup FT6X06
-   * @{
-   */
-
-  /* Exported types ------------------------------------------------------------*/
-
-  /** @defgroup FT6X06_Exported_Types
-   * @{
-   */
-
-  /* Exported constants --------------------------------------------------------*/
-
-  /** @defgroup FT6X06_Exported_Constants
-   * @{
-   */
-
-  /* Maximum border values of the touchscreen pad */
-#define  FT_6206_MAX_WIDTH              ((uint16_t)800)     /* Touchscreen pad max width   */
-#define  FT_6206_MAX_HEIGHT             ((uint16_t)480)     /* Touchscreen pad max height  */
-
-  /* Possible values of driver functions return status */
-#define FT6206_STATUS_OK                0
-#define FT6206_STATUS_NOT_OK            1
-
-  /* Possible values of global variable 'TS_I2C_Initialized' */
-#define FT6206_I2C_NOT_INITIALIZED      0
-#define FT6206_I2C_INITIALIZED          1
-
-  /* Max detectable simultaneous touches */
-#define FT6206_MAX_DETECTABLE_TOUCH     2
-
-  /**
-   * @brief : Definitions for FT6206 I2C register addresses on 8 bit
-   **/
-
-  /* Current mode register of the FT6206 (R/W) */
-#define FT6206_DEV_MODE_REG             0x00
-
-  /* Possible values of FT6206_DEV_MODE_REG */
-#define FT6206_DEV_MODE_WORKING         0x00
-#define FT6206_DEV_MODE_FACTORY         0x04
-
-#define FT6206_DEV_MODE_MASK            0x7
-#define FT6206_DEV_MODE_SHIFT           4
-
-  /* Gesture ID register */
-#define FT6206_GEST_ID_REG              0x01
-
-  /* Possible values of FT6206_GEST_ID_REG */
-#define FT6206_GEST_ID_NO_GESTURE       0x00
-#define FT6206_GEST_ID_MOVE_UP          0x10
-#define FT6206_GEST_ID_MOVE_RIGHT       0x14
-#define FT6206_GEST_ID_MOVE_DOWN        0x18
-#define FT6206_GEST_ID_MOVE_LEFT        0x1C
-#define FT6206_GEST_ID_ZOOM_IN          0x48
-#define FT6206_GEST_ID_ZOOM_OUT         0x49
-
-  /* Touch Data Status register : gives number of active touch points (0..2) */
-#define FT6206_TD_STAT_REG              0x02
-
-  /* Values related to FT6206_TD_STAT_REG */
-#define FT6206_TD_STAT_MASK             0x0F
-#define FT6206_TD_STAT_SHIFT            0x00
-
-  /* Values Pn_XH and Pn_YH related */
-#define FT6206_TOUCH_EVT_FLAG_PRESS_DOWN 0x00
-#define FT6206_TOUCH_EVT_FLAG_LIFT_UP    0x01
-#define FT6206_TOUCH_EVT_FLAG_CONTACT    0x02
-#define FT6206_TOUCH_EVT_FLAG_NO_EVENT   0x03
-
-#define FT6206_TOUCH_EVT_FLAG_SHIFT     6
-#define FT6206_TOUCH_EVT_FLAG_MASK      (3 << FT6206_TOUCH_EVT_FLAG_SHIFT)
-
-#define FT6206_MSB_MASK                 0x0F
-#define FT6206_MSB_SHIFT                0
-
-  /* Values Pn_XL and Pn_YL related */
-#define FT6206_LSB_MASK                 0xFF
-#define FT6206_LSB_SHIFT                0
-
-#define FT6206_P1_XH_REG                0x03
-#define FT6206_P1_XL_REG                0x04
-#define FT6206_P1_YH_REG                0x05
-#define FT6206_P1_YL_REG                0x06
-
-  /* Touch Pressure register value (R) */
-#define FT6206_P1_WEIGHT_REG            0x07
-
-  /* Values Pn_WEIGHT related  */
-#define FT6206_TOUCH_WEIGHT_MASK        0xFF
-#define FT6206_TOUCH_WEIGHT_SHIFT       0
-
-  /* Touch area register */
-#define FT6206_P1_MISC_REG              0x08
-
-  /* Values related to FT6206_Pn_MISC_REG */
-#define FT6206_TOUCH_AREA_MASK         (0x04 << 4)
-#define FT6206_TOUCH_AREA_SHIFT        0x04
-
-#define FT6206_P2_XH_REG               0x09
-#define FT6206_P2_XL_REG               0x0A
-#define FT6206_P2_YH_REG               0x0B
-#define FT6206_P2_YL_REG               0x0C
-#define FT6206_P2_WEIGHT_REG           0x0D
-#define FT6206_P2_MISC_REG             0x0E
-
-  /* Threshold for touch detection */
-#define FT6206_TH_GROUP_REG            0x80
-
-  /* Values FT6206_TH_GROUP_REG : threshold related  */
-#define FT6206_THRESHOLD_MASK          0xFF
-#define FT6206_THRESHOLD_SHIFT         0
-
-  /* Filter function coefficients */
-#define FT6206_TH_DIFF_REG             0x85
-
-  /* Control register */
-#define FT6206_CTRL_REG                0x86
-
-  /* Values related to FT6206_CTRL_REG */
-
-  /* Will keep the Active mode when there is no touching */
-#define FT6206_CTRL_KEEP_ACTIVE_MODE    0x00
-
-  /* Switching from Active mode to Monitor mode automatically when there is no touching */
-#define FT6206_CTRL_KEEP_AUTO_SWITCH_MONITOR_MODE  0x01
-
-  /* The time period of switching from Active mode to Monitor mode when there is no touching */
-#define FT6206_TIMEENTERMONITOR_REG     0x87
-
-  /* Report rate in Active mode */
-#define FT6206_PERIODACTIVE_REG         0x88
-
-  /* Report rate in Monitor mode */
-#define FT6206_PERIODMONITOR_REG        0x89
-
-  /* The value of the minimum allowed angle while Rotating gesture mode */
-#define FT6206_RADIAN_VALUE_REG         0x91
-
-  /* Maximum offset while Moving Left and Moving Right gesture */
-#define FT6206_OFFSET_LEFT_RIGHT_REG    0x92
-
-  /* Maximum offset while Moving Up and Moving Down gesture */
-#define FT6206_OFFSET_UP_DOWN_REG       0x93
-
-  /* Minimum distance while Moving Left and Moving Right gesture */
-#define FT6206_DISTANCE_LEFT_RIGHT_REG  0x94
-
-  /* Minimum distance while Moving Up and Moving Down gesture */
-#define FT6206_DISTANCE_UP_DOWN_REG     0x95
-
-  /* Maximum distance while Zoom In and Zoom Out gesture */
-#define FT6206_DISTANCE_ZOOM_REG        0x96
-
-  /* High 8-bit of LIB Version info */
-#define FT6206_LIB_VER_H_REG            0xA1
-
-  /* Low 8-bit of LIB Version info */
-#define FT6206_LIB_VER_L_REG            0xA2
-
-  /* Chip Selecting */
-#define FT6206_CIPHER_REG               0xA3
-
-  /* Interrupt mode register (used when in interrupt mode) */
-#define FT6206_GMODE_REG                0xA4
-
-#define FT6206_G_MODE_INTERRUPT_MASK    0x03
-#define FT6206_G_MODE_INTERRUPT_SHIFT   0x00
-
-  /* Possible values of FT6206_GMODE_REG */
-#define FT6206_G_MODE_INTERRUPT_POLLING 0x00
-#define FT6206_G_MODE_INTERRUPT_TRIGGER 0x01
-
-  /* Current power mode the FT6206 system is in (R) */
-#define FT6206_PWR_MODE_REG             0xA5
-
-  /* FT6206 firmware version */
-#define FT6206_FIRMID_REG               0xA6
-
-  /* FT6206 Chip identification register */
-#define FT6206_CHIP_ID_REG              0xA8
-
-  /*  Possible values of FT6206_CHIP_ID_REG */
-#define FT6206_ID_VALUE                 0x11
-
-  /* Release code version */
-#define FT6206_RELEASE_CODE_ID_REG      0xAF
-
-  /* Current operating mode the FT6206 system is in (R) */
-#define FT6206_STATE_REG                0xBC
-
-  /**
-   * @}
-   */
-
-  /* Exported macro ------------------------------------------------------------*/
-
-  /** @defgroup ft6x06_Exported_Macros
-   * @{
-   */
-
-  /* Exported functions --------------------------------------------------------*/
-
-  /** @defgroup ft6x06_Exported_Functions
-   * @{
-   */
-
-  /**
-   * @brief ft6x06 Control functions
-   */
-
-
-/**
- * @brief  Initialize the ft6x06 communication bus
- *         from MCU to FT6206 : ie I2C channel initialization (if required).
- * @param  DeviceAddr: Device address on communication Bus (I2C slave address of FT6206).
- * @retval None
- */
-void ft6x06_Init(uint16_t DeviceAddr);
-
-/**
- * @brief  Software Reset the ft6x06.
- * @param  DeviceAddr: Device address on communication Bus (I2C slave address of FT6206).
- * @retval None
- */
-void ft6x06_Reset(uint16_t DeviceAddr);
-
-/**
- * @brief  Read the ft6x06 device ID, pre intitalize I2C in case of need to be
- *         able to read the FT6206 device ID, and verify this is a FT6206.
- * @param  DeviceAddr: I2C FT6x06 Slave address.
- * @retval The Device ID (two bytes).
- */
-uint16_t ft6x06_ReadID(uint16_t DeviceAddr);
-
-/**
- * @brief  Configures the touch Screen IC device to start detecting touches
- * @param  DeviceAddr: Device address on communication Bus (I2C slave address).
- * @retval None.
- */
-void ft6x06_TS_Start(uint16_t DeviceAddr);
-
-/**
- * @brief  Return if there is touches detected or not.
- *         Try to detect new touches and forget the old ones (reset internal global
- *         variables).
- * @param  DeviceAddr: Device address on communication Bus.
- * @retval : Number of active touches detected (can be 0, 1 or 2).
- */
-uint8_t ft6x06_TS_DetectTouch(uint16_t DeviceAddr);
-
-/**
- * @brief  Get the touch screen X and Y positions values
- *         Manage multi touch thanks to touch Index global
- *         variable 'ft6x06_handle.currActiveTouchIdx'.
- * @param  DeviceAddr: Device address on communication Bus.
- * @param  X: Pointer to X position value
- * @param  Y: Pointer to Y position value
- * @retval None.
- */
-void ft6x06_TS_GetXY(uint16_t DeviceAddr, uint16_t *X, uint16_t *Y);
-
-/**
- * @brief  Configure the FT6206 device to generate IT on given INT pin
- *         connected to MCU as EXTI.
- * @param  DeviceAddr: Device address on communication Bus (Slave I2C address of FT6206).
- * @retval None
- */
-void ft6x06_TS_EnableIT(uint16_t DeviceAddr);
-
-/**
- * @brief  Configure the FT6206 device to stop generating IT on the given INT pin
- *         connected to MCU as EXTI.
- * @param  DeviceAddr: Device address on communication Bus (Slave I2C address of FT6206).
- * @retval None
- */
-void ft6x06_TS_DisableIT(uint16_t DeviceAddr);
-
-/**
- * @brief  Get IT status from FT6206 interrupt status registers
- *         Should be called Following an EXTI coming to the MCU to know the detailed
- *         reason of the interrupt.
- * @param  DeviceAddr: Device address on communication Bus (I2C slave address of FT6206).
- * @retval TS interrupts status
- */
-uint8_t ft6x06_TS_ITStatus (uint16_t DeviceAddr);
-
-/**
- * @brief  Clear IT status in FT6206 interrupt status clear registers
- *         Should be called Following an EXTI coming to the MCU.
- * @param  DeviceAddr: Device address on communication Bus (I2C slave address of FT6206).
- * @retval TS interrupts status
- */
-void ft6x06_TS_ClearIT (uint16_t DeviceAddr);
-
-/**** NEW FEATURES enabled when Multi-touch support is enabled ****/
-
-#if (TS_MULTI_TOUCH_SUPPORTED == 1)
-
-/**
- * @brief  Get the last touch gesture identification (zoom, move up/down...).
- * @param  DeviceAddr: Device address on communication Bus (I2C slave address of FT6x06).
- * @param  pGestureId : Pointer to get last touch gesture Identification.
- * @retval None.
- */
-void ft6x06_TS_GetGestureID(uint16_t DeviceAddr, uint32_t * pGestureId);
-
-/**
- * @brief  Get the touch detailed informations on touch number 'touchIdx' (0..1)
- *         This touch detailed information contains :
- *         - weight that was applied to this touch
- *         - sub-area of the touch in the touch panel
- *         - event of linked to the touch (press down, lift up, ...)
- * @param  DeviceAddr: Device address on communication Bus (I2C slave address of FT6x06).
- * @param  touchIdx : Passed index of the touch (0..1) on which we want to get the
- *                    detailed information.
- * @param  pWeight : Pointer to to get the weight information of 'touchIdx'.
- * @param  pArea   : Pointer to to get the sub-area information of 'touchIdx'.
- * @param  pEvent  : Pointer to to get the event information of 'touchIdx'.
-
- * @retval None.
- */
-void ft6x06_TS_GetTouchInfo(uint16_t   DeviceAddr,
-                            uint32_t   touchIdx,
-                            uint32_t * pWeight,
-                            uint32_t * pArea,
-                            uint32_t * pEvent);
-
-#endif /* TS_MULTI_TOUCH_SUPPORTED == 1 */
-
-/* Imported TS IO functions --------------------------------------------------------*/
-
-/** @defgroup ft6x06_Imported_Functions
- * @{
- */
-
-/* TouchScreen (TS) external IO functions */
-extern void     TS_IO_Init(void);
-extern void     TS_IO_Write(uint8_t Addr, uint8_t Reg, uint8_t Value);
-extern uint8_t  TS_IO_Read(uint8_t Addr, uint8_t Reg);
-extern uint16_t TS_IO_ReadMultiple(uint8_t Addr, uint8_t Reg, uint8_t *Buffer, uint16_t Length);
-extern void     TS_IO_Delay(uint32_t Delay);
-
-  /**
-   * @}
-   */
-
-  /* Imported global variables --------------------------------------------------------*/
-
-  /** @defgroup ft6x06_Imported_Globals
-   * @{
-   */
-
-
-/* Touch screen driver structure */
-extern TS_DrvTypeDef ft6x06_ts_drv;
-
-  /**
-   * @}
-   */
-
-#ifdef __cplusplus
-}
-#endif
-#endif /* __FT6X06_H */
-
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/