mbed libraries for KL25Z
Diff: KL25Z/core_cmInstr.h
- Revision:
- 2:e9a661555b58
- Parent:
- 0:8024c367e29f
- Child:
- 9:663789d7729f
--- a/KL25Z/core_cmInstr.h Fri Oct 05 15:45:13 2012 +0000 +++ b/KL25Z/core_cmInstr.h Wed Oct 10 14:14:12 2012 +0000 @@ -1,621 +1,621 @@ -/**************************************************************************//** - * @file core_cmInstr.h - * @brief CMSIS Cortex-M Core Instruction Access Header File - * @version V3.02 - * @date 08. May 2012 - * - * @note - * Copyright (C) 2009-2012 ARM Limited. All rights reserved. - * - * @par - * ARM Limited (ARM) is supplying this software for use with Cortex-M - * processor based microcontrollers. This file can be freely distributed - * within development tools that are supporting such ARM based processors. - * - * @par - * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED - * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. - * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR - * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. - * - ******************************************************************************/ - -#ifndef __CORE_CMINSTR_H -#define __CORE_CMINSTR_H - - -/* ########################## Core Instruction Access ######################### */ -/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface - Access to dedicated instructions - @{ -*/ - -#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ -/* ARM armcc specific functions */ - -#if (__ARMCC_VERSION < 400677) - #error "Please use ARM Compiler Toolchain V4.0.677 or later!" -#endif - - -/** \brief No Operation - - No Operation does nothing. This instruction can be used for code alignment purposes. - */ -#define __NOP __nop - - -/** \brief Wait For Interrupt - - Wait For Interrupt is a hint instruction that suspends execution - until one of a number of events occurs. - */ -#define __WFI __wfi - - -/** \brief Wait For Event - - Wait For Event is a hint instruction that permits the processor to enter - a low-power state until one of a number of events occurs. - */ -#define __WFE __wfe - - -/** \brief Send Event - - Send Event is a hint instruction. It causes an event to be signaled to the CPU. - */ -#define __SEV __sev - - -/** \brief Instruction Synchronization Barrier - - Instruction Synchronization Barrier flushes the pipeline in the processor, - so that all instructions following the ISB are fetched from cache or - memory, after the instruction has been completed. - */ -#define __ISB() __isb(0xF) - - -/** \brief Data Synchronization Barrier - - This function acts as a special kind of Data Memory Barrier. - It completes when all explicit memory accesses before this instruction complete. - */ -#define __DSB() __dsb(0xF) - - -/** \brief Data Memory Barrier - - This function ensures the apparent order of the explicit memory operations before - and after the instruction, without ensuring their completion. - */ -#define __DMB() __dmb(0xF) - - -/** \brief Reverse byte order (32 bit) - - This function reverses the byte order in integer value. - - \param [in] value Value to reverse - \return Reversed value - */ -#define __REV __rev - - -/** \brief Reverse byte order (16 bit) - - This function reverses the byte order in two unsigned short values. - - \param [in] value Value to reverse - \return Reversed value - */ -#ifndef __NO_EMBEDDED_ASM -__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value) -{ - rev16 r0, r0 - bx lr -} -#endif - -/** \brief Reverse byte order in signed short value - - This function reverses the byte order in a signed short value with sign extension to integer. - - \param [in] value Value to reverse - \return Reversed value - */ -#ifndef __NO_EMBEDDED_ASM -__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value) -{ - revsh r0, r0 - bx lr -} -#endif - - -/** \brief Rotate Right in unsigned value (32 bit) - - This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. - - \param [in] value Value to rotate - \param [in] value Number of Bits to rotate - \return Rotated value - */ -#define __ROR __ror - - -#if (__CORTEX_M >= 0x03) - -/** \brief Reverse bit order of value - - This function reverses the bit order of the given value. - - \param [in] value Value to reverse - \return Reversed value - */ -#define __RBIT __rbit - - -/** \brief LDR Exclusive (8 bit) - - This function performs a exclusive LDR command for 8 bit value. - - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr)) - - -/** \brief LDR Exclusive (16 bit) - - This function performs a exclusive LDR command for 16 bit values. - - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr)) - - -/** \brief LDR Exclusive (32 bit) - - This function performs a exclusive LDR command for 32 bit values. - - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr)) - - -/** \brief STR Exclusive (8 bit) - - This function performs a exclusive STR command for 8 bit values. - - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#define __STREXB(value, ptr) __strex(value, ptr) - - -/** \brief STR Exclusive (16 bit) - - This function performs a exclusive STR command for 16 bit values. - - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#define __STREXH(value, ptr) __strex(value, ptr) - - -/** \brief STR Exclusive (32 bit) - - This function performs a exclusive STR command for 32 bit values. - - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#define __STREXW(value, ptr) __strex(value, ptr) - - -/** \brief Remove the exclusive lock - - This function removes the exclusive lock which is created by LDREX. - - */ -#define __CLREX __clrex - - -/** \brief Signed Saturate - - This function saturates a signed value. - - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (1..32) - \return Saturated value - */ -#define __SSAT __ssat - - -/** \brief Unsigned Saturate - - This function saturates an unsigned value. - - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (0..31) - \return Saturated value - */ -#define __USAT __usat - - -/** \brief Count leading zeros - - This function counts the number of leading zeros of a data value. - - \param [in] value Value to count the leading zeros - \return number of leading zeros in value - */ -#define __CLZ __clz - -#endif /* (__CORTEX_M >= 0x03) */ - - - -#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/ -/* IAR iccarm specific functions */ - -#include <cmsis_iar.h> - - -#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/ -/* TI CCS specific functions */ - -#include <cmsis_ccs.h> - - -#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/ -/* GNU gcc specific functions */ - -/** \brief No Operation - - No Operation does nothing. This instruction can be used for code alignment purposes. - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void) -{ - __ASM volatile ("nop"); -} - - -/** \brief Wait For Interrupt - - Wait For Interrupt is a hint instruction that suspends execution - until one of a number of events occurs. - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void) -{ - __ASM volatile ("wfi"); -} - - -/** \brief Wait For Event - - Wait For Event is a hint instruction that permits the processor to enter - a low-power state until one of a number of events occurs. - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void) -{ - __ASM volatile ("wfe"); -} - - -/** \brief Send Event - - Send Event is a hint instruction. It causes an event to be signaled to the CPU. - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void) -{ - __ASM volatile ("sev"); -} - - -/** \brief Instruction Synchronization Barrier - - Instruction Synchronization Barrier flushes the pipeline in the processor, - so that all instructions following the ISB are fetched from cache or - memory, after the instruction has been completed. - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void) -{ - __ASM volatile ("isb"); -} - - -/** \brief Data Synchronization Barrier - - This function acts as a special kind of Data Memory Barrier. - It completes when all explicit memory accesses before this instruction complete. - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void) -{ - __ASM volatile ("dsb"); -} - - -/** \brief Data Memory Barrier - - This function ensures the apparent order of the explicit memory operations before - and after the instruction, without ensuring their completion. - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void) -{ - __ASM volatile ("dmb"); -} - - -/** \brief Reverse byte order (32 bit) - - This function reverses the byte order in integer value. - - \param [in] value Value to reverse - \return Reversed value - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value) -{ - uint32_t result; - - __ASM volatile ("rev %0, %1" : "=r" (result) : "r" (value) ); - return(result); -} - - -/** \brief Reverse byte order (16 bit) - - This function reverses the byte order in two unsigned short values. - - \param [in] value Value to reverse - \return Reversed value - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value) -{ - uint32_t result; - - __ASM volatile ("rev16 %0, %1" : "=r" (result) : "r" (value) ); - return(result); -} - - -/** \brief Reverse byte order in signed short value - - This function reverses the byte order in a signed short value with sign extension to integer. - - \param [in] value Value to reverse - \return Reversed value - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value) -{ - uint32_t result; - - __ASM volatile ("revsh %0, %1" : "=r" (result) : "r" (value) ); - return(result); -} - - -/** \brief Rotate Right in unsigned value (32 bit) - - This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. - - \param [in] value Value to rotate - \param [in] value Number of Bits to rotate - \return Rotated value - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2) -{ - - __ASM volatile ("ror %0, %0, %1" : "+r" (op1) : "r" (op2) ); - return(op1); -} - - -#if (__CORTEX_M >= 0x03) - -/** \brief Reverse bit order of value - - This function reverses the bit order of the given value. - - \param [in] value Value to reverse - \return Reversed value - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value) -{ - uint32_t result; - - __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); - return(result); -} - - -/** \brief LDR Exclusive (8 bit) - - This function performs a exclusive LDR command for 8 bit value. - - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr) -{ - uint8_t result; - - __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) ); - return(result); -} - - -/** \brief LDR Exclusive (16 bit) - - This function performs a exclusive LDR command for 16 bit values. - - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr) -{ - uint16_t result; - - __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) ); - return(result); -} - - -/** \brief LDR Exclusive (32 bit) - - This function performs a exclusive LDR command for 32 bit values. - - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr) -{ - uint32_t result; - - __ASM volatile ("ldrex %0, [%1]" : "=r" (result) : "r" (addr) ); - return(result); -} - - -/** \brief STR Exclusive (8 bit) - - This function performs a exclusive STR command for 8 bit values. - - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) -{ - uint32_t result; - - __ASM volatile ("strexb %0, %2, [%1]" : "=&r" (result) : "r" (addr), "r" (value) ); - return(result); -} - - -/** \brief STR Exclusive (16 bit) - - This function performs a exclusive STR command for 16 bit values. - - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) -{ - uint32_t result; - - __ASM volatile ("strexh %0, %2, [%1]" : "=&r" (result) : "r" (addr), "r" (value) ); - return(result); -} - - -/** \brief STR Exclusive (32 bit) - - This function performs a exclusive STR command for 32 bit values. - - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) -{ - uint32_t result; - - __ASM volatile ("strex %0, %2, [%1]" : "=&r" (result) : "r" (addr), "r" (value) ); - return(result); -} - - -/** \brief Remove the exclusive lock - - This function removes the exclusive lock which is created by LDREX. - - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void) -{ - __ASM volatile ("clrex"); -} - - -/** \brief Signed Saturate - - This function saturates a signed value. - - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (1..32) - \return Saturated value - */ -#define __SSAT(ARG1,ARG2) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1); \ - __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) - - -/** \brief Unsigned Saturate - - This function saturates an unsigned value. - - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (0..31) - \return Saturated value - */ -#define __USAT(ARG1,ARG2) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1); \ - __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) - - -/** \brief Count leading zeros - - This function counts the number of leading zeros of a data value. - - \param [in] value Value to count the leading zeros - \return number of leading zeros in value - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value) -{ - uint8_t result; - - __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) ); - return(result); -} - -#endif /* (__CORTEX_M >= 0x03) */ - - - - -#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/ -/* TASKING carm specific functions */ - -/* - * The CMSIS functions have been implemented as intrinsics in the compiler. - * Please use "carm -?i" to get an up to date list of all intrinsics, - * Including the CMSIS ones. - */ - -#endif - -/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ - -#endif /* __CORE_CMINSTR_H */ +/**************************************************************************//** + * @file core_cmInstr.h + * @brief CMSIS Cortex-M Core Instruction Access Header File + * @version V3.02 + * @date 08. May 2012 + * + * @note + * Copyright (C) 2009-2012 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ + +#ifndef __CORE_CMINSTR_H +#define __CORE_CMINSTR_H + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +#if (__ARMCC_VERSION < 400677) + #error "Please use ARM Compiler Toolchain V4.0.677 or later!" +#endif + + +/** \brief No Operation + + No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __nop + + +/** \brief Wait For Interrupt + + Wait For Interrupt is a hint instruction that suspends execution + until one of a number of events occurs. + */ +#define __WFI __wfi + + +/** \brief Wait For Event + + Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __wfe + + +/** \brief Send Event + + Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __sev + + +/** \brief Instruction Synchronization Barrier + + Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or + memory, after the instruction has been completed. + */ +#define __ISB() __isb(0xF) + + +/** \brief Data Synchronization Barrier + + This function acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __dsb(0xF) + + +/** \brief Data Memory Barrier + + This function ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __dmb(0xF) + + +/** \brief Reverse byte order (32 bit) + + This function reverses the byte order in integer value. + + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV __rev + + +/** \brief Reverse byte order (16 bit) + + This function reverses the byte order in two unsigned short values. + + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value) +{ + rev16 r0, r0 + bx lr +} +#endif + +/** \brief Reverse byte order in signed short value + + This function reverses the byte order in a signed short value with sign extension to integer. + + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value) +{ + revsh r0, r0 + bx lr +} +#endif + + +/** \brief Rotate Right in unsigned value (32 bit) + + This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + + \param [in] value Value to rotate + \param [in] value Number of Bits to rotate + \return Rotated value + */ +#define __ROR __ror + + +#if (__CORTEX_M >= 0x03) + +/** \brief Reverse bit order of value + + This function reverses the bit order of the given value. + + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __rbit + + +/** \brief LDR Exclusive (8 bit) + + This function performs a exclusive LDR command for 8 bit value. + + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr)) + + +/** \brief LDR Exclusive (16 bit) + + This function performs a exclusive LDR command for 16 bit values. + + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr)) + + +/** \brief LDR Exclusive (32 bit) + + This function performs a exclusive LDR command for 32 bit values. + + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr)) + + +/** \brief STR Exclusive (8 bit) + + This function performs a exclusive STR command for 8 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB(value, ptr) __strex(value, ptr) + + +/** \brief STR Exclusive (16 bit) + + This function performs a exclusive STR command for 16 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH(value, ptr) __strex(value, ptr) + + +/** \brief STR Exclusive (32 bit) + + This function performs a exclusive STR command for 32 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW(value, ptr) __strex(value, ptr) + + +/** \brief Remove the exclusive lock + + This function removes the exclusive lock which is created by LDREX. + + */ +#define __CLREX __clrex + + +/** \brief Signed Saturate + + This function saturates a signed value. + + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __ssat + + +/** \brief Unsigned Saturate + + This function saturates an unsigned value. + + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __usat + + +/** \brief Count leading zeros + + This function counts the number of leading zeros of a data value. + + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ __clz + +#endif /* (__CORTEX_M >= 0x03) */ + + + +#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ + +#include <cmsis_iar.h> + + +#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/ +/* TI CCS specific functions */ + +#include <cmsis_ccs.h> + + +#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +/** \brief No Operation + + No Operation does nothing. This instruction can be used for code alignment purposes. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void) +{ + __ASM volatile ("nop"); +} + + +/** \brief Wait For Interrupt + + Wait For Interrupt is a hint instruction that suspends execution + until one of a number of events occurs. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void) +{ + __ASM volatile ("wfi"); +} + + +/** \brief Wait For Event + + Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void) +{ + __ASM volatile ("wfe"); +} + + +/** \brief Send Event + + Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void) +{ + __ASM volatile ("sev"); +} + + +/** \brief Instruction Synchronization Barrier + + Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or + memory, after the instruction has been completed. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void) +{ + __ASM volatile ("isb"); +} + + +/** \brief Data Synchronization Barrier + + This function acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void) +{ + __ASM volatile ("dsb"); +} + + +/** \brief Data Memory Barrier + + This function ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void) +{ + __ASM volatile ("dmb"); +} + + +/** \brief Reverse byte order (32 bit) + + This function reverses the byte order in integer value. + + \param [in] value Value to reverse + \return Reversed value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rev %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + + +/** \brief Reverse byte order (16 bit) + + This function reverses the byte order in two unsigned short values. + + \param [in] value Value to reverse + \return Reversed value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rev16 %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + + +/** \brief Reverse byte order in signed short value + + This function reverses the byte order in a signed short value with sign extension to integer. + + \param [in] value Value to reverse + \return Reversed value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value) +{ + uint32_t result; + + __ASM volatile ("revsh %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + + +/** \brief Rotate Right in unsigned value (32 bit) + + This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + + \param [in] value Value to rotate + \param [in] value Number of Bits to rotate + \return Rotated value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + + __ASM volatile ("ror %0, %0, %1" : "+r" (op1) : "r" (op2) ); + return(op1); +} + + +#if (__CORTEX_M >= 0x03) + +/** \brief Reverse bit order of value + + This function reverses the bit order of the given value. + + \param [in] value Value to reverse + \return Reversed value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + + +/** \brief LDR Exclusive (8 bit) + + This function performs a exclusive LDR command for 8 bit value. + + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr) +{ + uint8_t result; + + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + + +/** \brief LDR Exclusive (16 bit) + + This function performs a exclusive LDR command for 16 bit values. + + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr) +{ + uint16_t result; + + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + + +/** \brief LDR Exclusive (32 bit) + + This function performs a exclusive LDR command for 32 bit values. + + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("ldrex %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + + +/** \brief STR Exclusive (8 bit) + + This function performs a exclusive STR command for 8 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexb %0, %2, [%1]" : "=&r" (result) : "r" (addr), "r" (value) ); + return(result); +} + + +/** \brief STR Exclusive (16 bit) + + This function performs a exclusive STR command for 16 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexh %0, %2, [%1]" : "=&r" (result) : "r" (addr), "r" (value) ); + return(result); +} + + +/** \brief STR Exclusive (32 bit) + + This function performs a exclusive STR command for 32 bit values. + + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("strex %0, %2, [%1]" : "=&r" (result) : "r" (addr), "r" (value) ); + return(result); +} + + +/** \brief Remove the exclusive lock + + This function removes the exclusive lock which is created by LDREX. + + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void) +{ + __ASM volatile ("clrex"); +} + + +/** \brief Signed Saturate + + This function saturates a signed value. + + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** \brief Unsigned Saturate + + This function saturates an unsigned value. + + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + + +/** \brief Count leading zeros + + This function counts the number of leading zeros of a data value. + + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value) +{ + uint8_t result; + + __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +#endif /* (__CORTEX_M >= 0x03) */ + + + + +#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/ +/* TASKING carm specific functions */ + +/* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all intrinsics, + * Including the CMSIS ones. + */ + +#endif + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + +#endif /* __CORE_CMINSTR_H */