Peter Drescher
Lib for FTDI FT800 graphic controller "EVE" The API is changed from the FTDI original names. It use smaller names now. DL() will add something to the display list instead of Ft_App_WrCoCmd_Buffer ... The FTDI programmer Guide is also using this commands.
Dependents: FT800_RGB_demo FT800_RGB_demo2 FT800_demo_for_habr Temp_&_RH_at_TFT-demo ... more
Fork of
FT800
by 
Peter Drescher
The mbed is talking thru the SPI interface with the graphic engine. We have to set up a list of Commands and send them to the FT800 to get graphics.
Hardware
1. VM800C development modules from FTDI : http://www.ftdichip.com/Products/Modules/VM800C.html
The modules come with different size lcd. 3.5", 4.3" or 5" or without.
The picture shows a modified board, because my lcd had a different pinout. The mbed is connected to the pin header on the bottom.
2. EVBEVE-FT800 board from GLYN: http://www.glyn.com/News-Events/Newsletter/Newsletter-2013/October-2013/A-quick-start-for-EVE-Requires-no-basic-knowledge-graphics-sound-and-touch-can-all-be-learned-in-minutes
The module has a 40 pin flex cable connector to connect a display out of the EDT series.
The mbed is connected via the pin header on the left. If you use this board with a EDT display you have to uncomment the #define Inv_Backlite in FT_LCD_Type.h, because the backlight dimming is inverted.
3. ConnectEVE board from MikroElektronika http://www.mikroe.com/add-on-boards/display/connecteve/#headers_10 The board has also a pin header to connect the mbed. - not tested, but it looks like the other boards.
4. ADAM arduino shield http://www.4dsystems.com.au/product/4DLCD_FT843/ Component page : http://mbed.org/components/ADAM/
Works with the NUCLEO boards, but you have to patch three wires.
Connection
We need 5 signals to connect to the mbed. SCK, MOSI and MISO are connected to a SPI channel. SS is the chip select signal and PD work as powerdown. The additional INT signal is not used at the moment. It is possible to generate a interrupt signal, but at the moment you have to poll the status register of the FT800 to see if a command is finished.
Software
This lib is based on the demo code from FTDI. If you want to use it, you have to read the programming manual : http://www.ftdichip.com/Support/Documents/ProgramGuides/FT800%20Programmers%20Guide.pdf
See my demo : http://mbed.org/users/dreschpe/code/FT800_RGB_demo/
Revision 6:16e22c789f7d, committed 2015-02-10
- Comitter:
- dreschpe
- Date:
- Tue Feb 10 23:32:22 2015 +0000
- Parent:
- 5:c0ffdb08b8a5
- Commit message:
- Add function to read/write touch calibration data.; Add color names ; Add a patch from Ivano Pelicella to draw flat buttons
Changed in this revision
diff -r c0ffdb08b8a5 -r 16e22c789f7d FT_CoPro_Cmds.cpp --- a/FT_CoPro_Cmds.cpp Thu Sep 25 20:32:21 2014 +0000 +++ b/FT_CoPro_Cmds.cpp Tue Feb 10 23:32:22 2015 +0000 @@ -219,7 +219,7 @@ SendCmd( CMD_BUTTON); SendCmd( (((ft_uint32_t)y<<16)|(x & 0xffff))); SendCmd( (((ft_uint32_t)h<<16)|w)); - SendCmd( (((ft_uint32_t)y<<16)|font)); + SendCmd( (((ft_uint32_t)options<<16)|font)); // patch from Ivano Pelicella to draw flat buttons SendStr( s); EndFunc( (FT_CMD_SIZE*4 + strlen(s) + 1)); }
diff -r c0ffdb08b8a5 -r 16e22c789f7d FT_Gpu_Hal.cpp
--- a/FT_Gpu_Hal.cpp Thu Sep 25 20:32:21 2014 +0000
+++ b/FT_Gpu_Hal.cpp Tue Feb 10 23:32:22 2015 +0000
@@ -23,7 +23,7 @@
_f800_isr(InterruptIn(intr))
{
_spi.format(8,0); // 8 bit spi mode 0
- _spi.frequency(4000000); // start with 10 Mhz SPI clock
+ _spi.frequency(2000000); // start with 10 Mhz SPI clock
_ss = 1; // cs high
_pd = 1; // PD high
Bootup();
diff -r c0ffdb08b8a5 -r 16e22c789f7d FT_Gpu_Hal.h --- a/FT_Gpu_Hal.h Thu Sep 25 20:32:21 2014 +0000 +++ b/FT_Gpu_Hal.h Tue Feb 10 23:32:22 2015 +0000 @@ -256,6 +256,11 @@ int Load_jpg(char* filename, ft_int16_t* x_size, ft_int16_t* y_size); ft_void_t Calibrate(); + ft_void_t read_calibrate(ft_uint8_t data[24]); + ft_void_t write_calibrate(ft_uint8_t data[24]); + + ft_uint32_t color_rgb(ft_uint8_t red,ft_uint8_t green, ft_uint8_t blue); + ft_uint32_t clear_color_rgb(ft_uint8_t red,ft_uint8_t green, ft_uint8_t blue); }; // end of class
diff -r c0ffdb08b8a5 -r 16e22c789f7d FT_Hal_Utils.cpp
--- a/FT_Hal_Utils.cpp Thu Sep 25 20:32:21 2014 +0000
+++ b/FT_Hal_Utils.cpp Tue Feb 10 23:32:22 2015 +0000
@@ -108,3 +108,25 @@
Wr8(REG_PWM_DUTY,i);
}
+ft_void_t FT800::read_calibrate(ft_uint8_t data[24]){
+ unsigned int i;
+ for(i=0;i<24;i++){
+ data[i] = Rd8(REG_TOUCH_TRANSFORM_A + i);
+ }
+}
+
+ft_void_t FT800::write_calibrate(ft_uint8_t data[24]){
+ unsigned int i;
+ for(i=0;i<24;i++) {
+ Wr8(REG_TOUCH_TRANSFORM_A + i,data[i]);
+ }
+}
+
+ft_uint32_t FT800::color_rgb(ft_uint8_t red,ft_uint8_t green, ft_uint8_t blue){
+ return ((4UL<<24)|(((red)&255UL)<<16)|(((green)&255UL)<<8)|(((blue)&255UL)<<0));
+ }
+
+ft_uint32_t FT800::clear_color_rgb(ft_uint8_t red,ft_uint8_t green, ft_uint8_t blue){
+ return ((2UL<<24)|(((red)&255UL)<<16)|(((green)&255UL)<<8)|(((blue)&255UL)<<0));
+ }
+
\ No newline at end of file
diff -r c0ffdb08b8a5 -r 16e22c789f7d FT_Platform.h --- a/FT_Platform.h Thu Sep 25 20:32:21 2014 +0000 +++ b/FT_Platform.h Tue Feb 10 23:32:22 2015 +0000 @@ -10,6 +10,7 @@ #include "FT_Gpu_Hal.h" #include "FT_Gpu.h" #include "FT_LCD_Type.h" +#include "FT_color.h" #endif /*_FT_PLATFORM_H_*/ /* Nothing beyond this*/
diff -r c0ffdb08b8a5 -r 16e22c789f7d FT_color.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/FT_color.h Tue Feb 10 23:32:22 2015 +0000 @@ -0,0 +1,38 @@ +// color definitions for FT800 controler + +#define Red 255,0,0 +#define Pink 255,192,203 +#define DarkRed 139,0,0 +#define OrangeRed 255,69,0 +#define Orange 255,165,0 +#define Gold 255,215,ß +#define Yellow 255,255,0 +#define LightYellow 255,255,224 +#define Magenta 255,0,255 +#define Indigo 75,0,130 +#define SlateBlue 106,90,205 +#define Blue 0,0,255 +#define DarkBlue 0,0,139 +#define SkyBlue 135,206,235 +#define LightBlue 173,216,230 +#define White 255,255,255 +#define Black 0,0,0 +#define Gray 128,128,128 +#define DarkGray 169,169,169 +#define Silver 192,192,192 +#define Brown 165,42,42 +#define Green 0,128,0 +#define DarkGreen 0,100,0 +#define YellowGreen 154,205,50 +#define Olive 128,128,0 +#define Lime 0,255,0 +#define Purple 128,0,128 +#define Tomato 255,99,71 +#define Violet 235,130,238 +#define Plum 221,160,221 +#define GreenYellow 173,255,47 +#define Cyan 0,255,255 +#define Aquamarine 127,255,212 +#define LightGray 211,211,211 + +
EVE FT800
ADAM