Clark Scheff / A7105TxRx

Library for interfacing with the AMICCOM A7105 2.4GHz FSK/GFSK Transceiver.

Dependents:   HubsanTX

A7105.cpp@8:033e328fb7c3, 2015-01-01 (annotated)

Committer:
d34d
Date:
Thu Jan 01 22:24:40 2015 +0000
Revision:
8:033e328fb7c3
Parent:
7:1b1d7e446aa4 
Fix A7105::writeData method

Who changed what in which revision?

UserRevisionLine numberNew contents of line
d34d 0:212eb977fe10 1 #include "mbed.h"
d34d 4:ca02a935e8eb 2 #include "A7105.h"
d34d 0:212eb977fe10 3
d34d 0:212eb977fe10 4 A7105::A7105(PinName mosi, PinName miso, PinName clk, PinName cs, uint32_t freqHz) :
d34d 4:ca02a935e8eb 5 _spi(mosi, miso, clk), _cs(cs) {
d34d 4:ca02a935e8eb 6 _spi.frequency(freqHz);
d34d 0:212eb977fe10 7 // Chip select is active low so set it to high until we are ready
d34d 4:ca02a935e8eb 8 _cs = 1;
d34d 0:212eb977fe10 9 }
d34d 0:212eb977fe10 10
d34d 0:212eb977fe10 11 A7105::~A7105() {}
d34d 0:212eb977fe10 12
d34d 0:212eb977fe10 13 uint8_t A7105::writeRegister(uint8_t regAddr, uint8_t value) {
d34d 0:212eb977fe10 14 // assert CS
d34d 7:1b1d7e446aa4 15 assertChipSelect();
d34d 2:35a860dbaba5 16 // write register
d34d 4:ca02a935e8eb 17 _spi.write(regAddr);
d34d 0:212eb977fe10 18 // write value into register
d34d 4:ca02a935e8eb 19 uint8_t ret = _spi.write(value);
d34d 0:212eb977fe10 20 // de-assert CS
d34d 7:1b1d7e446aa4 21 deassertChipSelect();
d34d 0:212eb977fe10 22
d34d 0:212eb977fe10 23 return ret;
d34d 0:212eb977fe10 24 }
d34d 0:212eb977fe10 25
d34d 0:212eb977fe10 26 uint8_t A7105::readRegister(uint8_t regAddr) {
d34d 0:212eb977fe10 27 // assert CS
d34d 7:1b1d7e446aa4 28 assertChipSelect();
d34d 0:212eb977fe10 29 // write register and read value
d34d 6:44b04880717b 30 _spi.write(_READ(regAddr));
d34d 6:44b04880717b 31 uint8_t ret = _spi.write(0);
d34d 0:212eb977fe10 32 // de-assert CS
d34d 7:1b1d7e446aa4 33 deassertChipSelect();
d34d 3:cd7f899f155f 34
d34d 3:cd7f899f155f 35 return ret;
d34d 3:cd7f899f155f 36 }
d34d 3:cd7f899f155f 37
d34d 3:cd7f899f155f 38 uint8_t A7105::strobe(enum A7105_State state) {
d34d 3:cd7f899f155f 39 // assert CS
d34d 7:1b1d7e446aa4 40 assertChipSelect();
d34d 3:cd7f899f155f 41 // write strobe command
d34d 4:ca02a935e8eb 42 uint8_t ret = _spi.write(state);
d34d 3:cd7f899f155f 43 // de-assert CS
d34d 7:1b1d7e446aa4 44 deassertChipSelect();
d34d 0:212eb977fe10 45
d34d 0:212eb977fe10 46 return ret;
d34d 0:212eb977fe10 47 }
d34d 0:212eb977fe10 48
d34d 8:033e328fb7c3 49 void A7105::writeData(uint8_t* data, size_t len, uint8_t channel) {
d34d 3:cd7f899f155f 50 // assert CS
d34d 7:1b1d7e446aa4 51 assertChipSelect();
d34d 4:ca02a935e8eb 52 _spi.write(A7105_RST_WRPTR);
d34d 4:ca02a935e8eb 53 _spi.write(A7105_05_FIFO_DATA);
d34d 3:cd7f899f155f 54 for (size_t i = 0; i < len; i++) {
d34d 4:ca02a935e8eb 55 _spi.write(data[i]);
d34d 3:cd7f899f155f 56 }
d34d 3:cd7f899f155f 57 // de-assert CS
d34d 7:1b1d7e446aa4 58 deassertChipSelect();
d34d 8:033e328fb7c3 59
d34d 8:033e328fb7c3 60 writeRegister(A7105_0F_PLL_I, channel);
d34d 8:033e328fb7c3 61 strobe(A7105_TX);
d34d 3:cd7f899f155f 62 }
d34d 3:cd7f899f155f 63
d34d 3:cd7f899f155f 64 void A7105::readData(uint8_t* buffer, size_t len) {
d34d 3:cd7f899f155f 65 strobe(A7105_RST_RDPTR);
d34d 3:cd7f899f155f 66 for (size_t i = 0; i < len; i++) {
d34d 3:cd7f899f155f 67 buffer[i] = readRegister(A7105_05_FIFO_DATA);
d34d 3:cd7f899f155f 68 }
d34d 3:cd7f899f155f 69 }
d34d 3:cd7f899f155f 70
d34d 3:cd7f899f155f 71 void A7105::setId(uint32_t id) {
d34d 3:cd7f899f155f 72 // assert CS
d34d 7:1b1d7e446aa4 73 assertChipSelect();
d34d 4:ca02a935e8eb 74 _spi.write(A7105_06_ID_DATA);
d34d 4:ca02a935e8eb 75 _spi.write((uint8_t)(id >> 24) & 0xFF);
d34d 4:ca02a935e8eb 76 _spi.write((uint8_t)(id >> 16) & 0xFF);
d34d 4:ca02a935e8eb 77 _spi.write((uint8_t)(id >> 8) & 0xFF);
d34d 4:ca02a935e8eb 78 _spi.write((uint8_t)id & 0xFF);
d34d 3:cd7f899f155f 79 // de-assert CS
d34d 7:1b1d7e446aa4 80 deassertChipSelect();
d34d 3:cd7f899f155f 81 }
d34d 3:cd7f899f155f 82
d34d 3:cd7f899f155f 83 void A7105::setPower(int32_t power) {
d34d 3:cd7f899f155f 84 /*
d34d 3:cd7f899f155f 85 Power amp is ~+16dBm so:
d34d 3:cd7f899f155f 86 TXPOWER_100uW = -23dBm == PAC=0 TBG=0
d34d 3:cd7f899f155f 87 TXPOWER_300uW = -20dBm == PAC=0 TBG=1
d34d 3:cd7f899f155f 88 TXPOWER_1mW = -16dBm == PAC=0 TBG=2
d34d 3:cd7f899f155f 89 TXPOWER_3mW = -11dBm == PAC=0 TBG=4
d34d 3:cd7f899f155f 90 TXPOWER_10mW = -6dBm == PAC=1 TBG=5
d34d 3:cd7f899f155f 91 TXPOWER_30mW = 0dBm == PAC=2 TBG=7
d34d 3:cd7f899f155f 92 TXPOWER_100mW = 1dBm == PAC=3 TBG=7
d34d 3:cd7f899f155f 93 TXPOWER_150mW = 1dBm == PAC=3 TBG=7
d34d 3:cd7f899f155f 94 */
d34d 3:cd7f899f155f 95 uint8_t pac, tbg;
d34d 3:cd7f899f155f 96 switch(power) {
d34d 3:cd7f899f155f 97 case 0: pac = 0; tbg = 0; break;
d34d 3:cd7f899f155f 98 case 1: pac = 0; tbg = 1; break;
d34d 3:cd7f899f155f 99 case 2: pac = 0; tbg = 2; break;
d34d 3:cd7f899f155f 100 case 3: pac = 0; tbg = 4; break;
d34d 3:cd7f899f155f 101 case 4: pac = 1; tbg = 5; break;
d34d 3:cd7f899f155f 102 case 5: pac = 2; tbg = 7; break;
d34d 3:cd7f899f155f 103 case 6: pac = 3; tbg = 7; break;
d34d 3:cd7f899f155f 104 case 7: pac = 3; tbg = 7; break;
d34d 3:cd7f899f155f 105 default: pac = 0; tbg = 0; break;
d34d 3:cd7f899f155f 106 };
d34d 3:cd7f899f155f 107 writeRegister(A7105_28_TX_TEST, (pac << 3) | tbg);
d34d 3:cd7f899f155f 108 }
d34d 3:cd7f899f155f 109
d34d 3:cd7f899f155f 110 void A7105::setTxRxMode(enum TXRX_State mode) {
d34d 3:cd7f899f155f 111 if(mode == TX_EN) {
d34d 3:cd7f899f155f 112 writeRegister(A7105_0B_GPIO1_PIN_I, 0x33);
d34d 3:cd7f899f155f 113 writeRegister(A7105_0C_GPIO2_PIN_II, 0x31);
d34d 3:cd7f899f155f 114 } else if (mode == RX_EN) {
d34d 3:cd7f899f155f 115 writeRegister(A7105_0B_GPIO1_PIN_I, 0x31);
d34d 3:cd7f899f155f 116 writeRegister(A7105_0C_GPIO2_PIN_II, 0x33);
d34d 3:cd7f899f155f 117 } else {
d34d 3:cd7f899f155f 118 //The A7105 seems to some with a cross-wired power-amp (A7700)
d34d 3:cd7f899f155f 119 //On the XL7105-D03, TX_EN -> RXSW and RX_EN -> TXSW
d34d 3:cd7f899f155f 120 //This means that sleep mode is wired as RX_EN = 1 and TX_EN = 1
d34d 3:cd7f899f155f 121 //If there are other amps in use, we'll need to fix this
d34d 3:cd7f899f155f 122 writeRegister(A7105_0B_GPIO1_PIN_I, 0x33);
d34d 3:cd7f899f155f 123 writeRegister(A7105_0C_GPIO2_PIN_II, 0x33);
d34d 3:cd7f899f155f 124 }
d34d 3:cd7f899f155f 125 }
d34d 3:cd7f899f155f 126
d34d 3:cd7f899f155f 127 int8_t A7105::reset() {
d34d 3:cd7f899f155f 128 writeRegister(A7105_00_MODE, 0x00);
d34d 3:cd7f899f155f 129 wait_us(1000);
d34d 3:cd7f899f155f 130
d34d 3:cd7f899f155f 131 // Set both GPIO as output and low
d34d 3:cd7f899f155f 132 setTxRxMode(TXRX_OFF);
d34d 3:cd7f899f155f 133 int8_t result = readRegister(A7105_10_PLL_II) == 0x9E;
d34d 3:cd7f899f155f 134 strobe(A7105_STANDBY);
d34d 3:cd7f899f155f 135
d34d 3:cd7f899f155f 136 return result;
d34d 0:212eb977fe10 137 }