chris stevens
High resolution barometer and altimeter using i2c mode
Dependents: mbed_5637_test Weather_Station_Ofiicial
Fork of
ms5611
by 
Kevin Braun
History
adjusted for address but calibration not completed
2014-05-20, by cstevens [Tue, 20 May 2014 16:18:00 +0000] rev 8
adjusted for address but calibration not completed
mss5561_needs calibration adjustment
2014-05-20, by cstevens [Tue, 20 May 2014 16:13:09 +0000] rev 7
mss5561_needs calibration adjustment
Updated .h documentation and added i2c frequency set in .cpp file.
2013-06-24, by loopsva [Mon, 24 Jun 2013 19:11:28 +0000] rev 6
Updated .h documentation and added i2c frequency set in .cpp file.
Added known altitude to sea level barometer calculations
2013-05-17, by loopsva [Fri, 17 May 2013 16:16:16 +0000] rev 5
Added known altitude to sea level barometer calculations
Documentation update
2013-05-13, by loopsva [Mon, 13 May 2013 22:27:13 +0000] rev 4
Documentation update
Fixed pressure error <20C. Added altitude calculation.
2013-05-13, by loopsva [Mon, 13 May 2013 20:12:15 +0000] rev 3
Fixed pressure error <20C. Added altitude calculation.
Updated calculations. Now accurate to 0.1mbar if temperature > 20C at sea level (ref KOAK). Error is 10+ mbar and variable if temperature < 20C. Temp is accurate however < 20C. Untested below -15C
2013-05-09, by loopsva [Thu, 09 May 2013 16:34:52 +0000] rev 2
Updated calculations. Now accurate to 0.1mbar if temperature > 20C at sea level (ref KOAK). Error is 10+ mbar and variable if temperature < 20C. Temp is accurate however < 20C. Untested below -15C
Documentaion update only
2013-05-07, by loopsva [Tue, 07 May 2013 18:55:31 +0000] rev 1
Documentaion update only
Initial Release. High resolution Barometer / Altimeter
2013-05-07, by loopsva [Tue, 07 May 2013 18:44:06 +0000] rev 0
Initial Release. High resolution Barometer / Altimeter