Karl Zweimüller
UniGraphic-Fork for ST7920-LCD-controller and SH1106. Tested with 128x64 LCD with SPI and 128x64-OLED with IIC
Dependents: UniGraphic-St7920-Test AfficheurUTILECO
Fork of
UniGraphic
by 
GraphicsDisplay
Fork of the UniGraphic-Library for monochrome LCDs with ST7920 controller and 128x64-IIC-OLED-Display with SH1106-Controller
Had to adapt LCD for following reasons:
- Give access to screenbuffer buffer[] to parent class
- pixel() and pixel_read() as they are hardware-dependent
- added reset-pin to IIC-Interface
GraphicDisplay:: sends buffer to LCD when auto_update is set to true.
Testprogram for ST7920 can be found here:
https://developer.mbed.org/users/charly/code/UniGraphic-St7920-Test/
Diff: Inits/ILI9486.cpp
- Revision:
- 10:668cf78ff93a
- Parent:
- 9:1749ae993cfe
- Child:
- 11:b842b8e332cb
diff -r 1749ae993cfe -r 668cf78ff93a Inits/ILI9486.cpp
--- a/Inits/ILI9486.cpp Tue Feb 17 22:35:07 2015 +0000
+++ b/Inits/ILI9486.cpp Thu Feb 19 00:33:27 2015 +0000
@@ -23,6 +23,7 @@
identify(); // will collect tftID and set mipistd flag
init();
set_orientation(0);
+ // FastWindow(true); // most but not all controllers support this, even if datasheet tells they should. ILI9486 does not, at least in par mode
cls();
locate(0,0);
}
@@ -34,6 +35,7 @@
identify(); // will collect tftID and set mipistd flag
init(); // per display custom init cmd sequence, implemented here
set_orientation(0); //TFT class does for MIPI standard and some ILIxxx
+ // FastWindow(true); // most but not all controllers support this, even if datasheet tells they should. ILI9486 does not, at least in par mode
cls();
locate(0,0);
}