Karl Zweimüller / UniGraphic

UniGraphic-Fork for ST7920-LCD-controller and SH1106. Tested with 128x64 LCD with SPI and 128x64-OLED with IIC

Dependents:   UniGraphic-St7920-Test AfficheurUTILECO

Fork of UniGraphic by GraphicsDisplay

Fork of the UniGraphic-Library for monochrome LCDs with ST7920 controller and 128x64-IIC-OLED-Display with SH1106-Controller

/media/uploads/charly/20170522_210344.jpg

/media/uploads/charly/20180425_230623.jpg

Had to adapt LCD for following reasons:

  • Give access to screenbuffer buffer[] to parent class
  • pixel() and pixel_read() as they are hardware-dependent
  • added reset-pin to IIC-Interface

GraphicDisplay:: sends buffer to LCD when auto_update is set to true.

Testprogram for ST7920 can be found here:

https://developer.mbed.org/users/charly/code/UniGraphic-St7920-Test/

Inits/IST3020.h

Committer:
Geremia
Date:
2015-02-12
Revision:
0:75ec1b3cde17
Child:
1:ff019d22b275

File content as of revision 0:75ec1b3cde17:

#ifndef MBED_IST3020_H
#define MBED_IST3020_H



#include "mbed.h"
#include "LCD.h"

/** Class for IST3020 display controller
* to be copypasted and adapted for other controllers
*/
class IST3020 : public LCD
{
 
 public:

    /** Create a PAR_8 display interface
    * @param displayproto PAR_8 or PAR_16
    * @param port GPIO port name to use
    * @param CS pin connected to CS of display
    * @param reset pin connected to RESET of display
    * @param DC pin connected to data/command of display
    * @param WR pin connected to SDI of display
    * @param RD pin connected to RS of display
    * @param name The name used by the parent class to access the interface
    */ 
    IST3020(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name);
  
    /** Create an SPI_8 display interface
    * @param displayproto SPI_8 or SPI_16
    * @param mosi SPI pin
    * @param miso SPI pin
    * @param sclk SPI pin
    * @param CS pin connected to CS of display
    * @param reset pin connected to RESET of display
    * @param DC pin connected to data/command of display
    * @param name The name used by the parent class to access the interface
    */ 
    IST3020(proto_t displayproto, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char* name);
  

  
protected:
    
    
    /** Init command sequence  
    */
    void init();



};
#endif