UniGraphic-Fork for ST7920-LCD-controller and SH1106. Tested with 128x64 LCD with SPI and 128x64-OLED with IIC
Dependents: UniGraphic-St7920-Test AfficheurUTILECO
Fork of UniGraphic by
Fork of the UniGraphic-Library for monochrome LCDs with ST7920 controller and 128x64-IIC-OLED-Display with SH1106-Controller
Had to adapt LCD for following reasons:
- Give access to screenbuffer buffer[] to parent class
- pixel() and pixel_read() as they are hardware-dependent
- added reset-pin to IIC-Interface
GraphicDisplay:: sends buffer to LCD when auto_update is set to true.
Testprogram for ST7920 can be found here:
https://developer.mbed.org/users/charly/code/UniGraphic-St7920-Test/
Inits/S6D04D1.h
- Committer:
- charly
- Date:
- 2018-10-30
- Revision:
- 38:1b6f9fc49a03
- Parent:
- 29:866213bb9bf0
File content as of revision 38:1b6f9fc49a03:
#ifndef MBED_S6D04D1_H #define MBED_S6D04D1_H #include "mbed.h" #include "TFT.h" /** Class for S6D04D1 TFT display controller * for BM8K5113 TFT1P3520-E TFT8K5113FPC-A1-E and TFT1P3520 * to be copypasted and adapted for other controllers */ class S6D04D1 : public TFT { public: /** Create a PAR display interface * @param displayproto PAR_8 or PAR_16 * @param port GPIO port name to use * @param CS pin connected to CS of display * @param reset pin connected to RESET of display * @param DC pin connected to data/command of display * @param WR pin connected to SDI of display * @param RD pin connected to RS of display * @param name The name used by the parent class to access the interface * @param LCDSIZE_X x size in pixel - optional * @param LCDSIZE_Y y size in pixel - optional */ S6D04D1(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name , unsigned int LCDSIZE_X = 240, unsigned int LCDSIZE_Y = 400); /** Create a BUS display interface * @param displayproto BUS_8 or BUS_16 * @param buspins array of PinName to group as Bus * @param CS pin connected to CS of display * @param reset pin connected to RESET of display * @param DC pin connected to data/command of display * @param WR pin connected to SDI of display * @param RD pin connected to RS of display * @param name The name used by the parent class to access the interface * @param LCDSIZE_X x size in pixel - optional * @param LCDSIZE_Y y size in pixel - optional */ S6D04D1(proto_t displayproto, PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name ,const unsigned int LCDSIZE_X = 240, unsigned int LCDSIZE_Y = 400); /** Create an SPI display interface * @param displayproto SPI_8 or SPI_16 * @param Hz SPI speed in Hz * @param mosi SPI pin * @param miso SPI pin * @param sclk SPI pin * @param CS pin connected to CS of display * @param reset pin connected to RESET of display * @param DC pin connected to data/command of display * @param name The name used by the parent class to access the interface * @param LCDSIZE_X x size in pixel - optional * @param LCDSIZE_Y y size in pixel - optional */ S6D04D1(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char* name , unsigned int LCDSIZE_X = 240, unsigned int LCDSIZE_Y = 400); // unsigned int status(); protected: /** Init command sequence */ void init(); }; #endif