UniGraphic-Fork for ST7920-LCD-controller and SH1106. Tested with 128x64 LCD with SPI and 128x64-OLED with IIC
Dependents: UniGraphic-St7920-Test AfficheurUTILECO
Fork of UniGraphic by
Fork of the UniGraphic-Library for monochrome LCDs with ST7920 controller and 128x64-IIC-OLED-Display with SH1106-Controller
Had to adapt LCD for following reasons:
- Give access to screenbuffer buffer[] to parent class
- pixel() and pixel_read() as they are hardware-dependent
- added reset-pin to IIC-Interface
GraphicDisplay:: sends buffer to LCD when auto_update is set to true.
Testprogram for ST7920 can be found here:
https://developer.mbed.org/users/charly/code/UniGraphic-St7920-Test/
Diff: Protocols/BUS8.h
- Revision:
- 21:ae0a4eedfc90
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Protocols/BUS8.h Tue Mar 31 21:14:48 2015 +0000 @@ -0,0 +1,150 @@ +#ifndef BUS8_H +#define BUS8_H + +#include "mbed.h" +#include "Protocols.h" +//#include "GraphicsDisplay.h" + +/** Parallel 8bit interface +*/ +class BUS8 : public Protocols +{ + public: + + /** Create a BUS8 display interface with scattered pins and 5 control pins + * + * @param buspins array of PinName to group as Bus + * , i.e PinName buspins[8]={PC_0,PC_1,PC_2,PC_3,D9,D8,D7,D6}; + * @param CS pin connected to CS of display + * @param reset pin connected to RESET of display + * @param DC pin connected to data/command of display + * @param WR pin connected to SDI of display + * @param RD pin connected to RS of display + */ + BUS8(PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD); + +protected: + + /** Send 8bit command to display controller + * + * @param cmd: byte to send + * + */ + virtual void wr_cmd8(unsigned char cmd); + + /** Send 8bit data to display controller + * + * @param data: byte to send + * + */ + virtual void wr_data8(unsigned char data); + + /** Send 2x8bit command to display controller + * + * @param cmd: halfword to send + * + */ + virtual void wr_cmd16(unsigned short cmd); + + /** Send 2x8bit data to display controller + * + * @param data: halfword to send + * + */ + virtual void wr_data16(unsigned short data); + + /** Send 16bit pixeldata to display controller + * + * @param data: halfword to send + * + */ + virtual void wr_gram(unsigned short data); + + /** Send same 16bit pixeldata to display controller multiple times + * + * @param data: halfword to send + * @param count: how many + * + */ + virtual void wr_gram(unsigned short data, unsigned int count); + + /** Send array of pixeldata shorts to display controller + * + * @param data: unsigned short pixeldata array + * @param lenght: lenght (in shorts) + * + */ + virtual void wr_grambuf(unsigned short* data, unsigned int lenght); + + /** Read 16bit pixeldata from display controller (with dummy cycle) + * + * @param convert true/false. Convert 18bit to 16bit, some controllers returns 18bit + * @returns 16bit color + */ + virtual unsigned short rd_gram(bool convert); + + /** Read 4x8bit register data (with dummy cycle) + * @param reg the register to read + * @returns data as uint + * + */ + virtual unsigned int rd_reg_data32(unsigned char reg); + + /** Read 3x8bit ExtendedCommands register data + * @param reg the register to read + * @returns data as uint + * @note EXTC regs (0xB0 to 0xFF) are read/write registers, for Parallel mode directly accessible in both directions + */ + virtual unsigned int rd_extcreg_data32(unsigned char reg, unsigned char SPIreadenablecmd); + + /** ILI932x specific, does a dummy read cycle, number of bits is protocol dependent + * for PAR protocols: a signle RD bit toggle + * for SPI8: 8clocks + * for SPI16: 16 clocks + */ + virtual void dummyread (); + + /** ILI932x specific, select register for a successive write or read + * + * @param reg register to be selected + * @param forread false = a write next (default), true = a read next + * @note forread only used by SPI protocols + */ + virtual void reg_select(unsigned char reg, bool forread =false); + + /** ILI932x specific, write register with data + * + * @param reg register to write + * @param data 16bit data + */ + virtual void reg_write(unsigned char reg, unsigned short data); + + /** ILI932x specific, read register + * + * @param reg register to be read + * @returns 16bit register value + */ + virtual unsigned short reg_read(unsigned char reg); + + /** HW reset sequence (without display init commands) + */ + virtual void hw_reset(); + + /** Set ChipSelect high or low + * @param enable 0/1 + */ + virtual void BusEnable(bool enable); + + + +private: + + BusInOut _bus; + DigitalOut _CS; + DigitalOut _reset; + DigitalOut _DC; + DigitalOut _WR; + DigitalOut _RD; + +}; +#endif \ No newline at end of file