Karl Zweimüller / UniGraphic

UniGraphic-Fork for ST7920-LCD-controller and SH1106. Tested with 128x64 LCD with SPI and 128x64-OLED with IIC

Dependents:   UniGraphic-St7920-Test AfficheurUTILECO

Fork of UniGraphic by GraphicsDisplay

Fork of the UniGraphic-Library for monochrome LCDs with ST7920 controller and 128x64-IIC-OLED-Display with SH1106-Controller

/media/uploads/charly/20170522_210344.jpg

/media/uploads/charly/20180425_230623.jpg

Had to adapt LCD for following reasons:

  • Give access to screenbuffer buffer[] to parent class
  • pixel() and pixel_read() as they are hardware-dependent
  • added reset-pin to IIC-Interface

GraphicDisplay:: sends buffer to LCD when auto_update is set to true.

Testprogram for ST7920 can be found here:

https://developer.mbed.org/users/charly/code/UniGraphic-St7920-Test/

Diff: Inits/ST7565.h

Revision:
21:ae0a4eedfc90
Parent:
18:ffa58f1a680a
--- a/Inits/ST7565.h	Mon Mar 23 14:08:04 2015 +0000
+++ b/Inits/ST7565.h	Tue Mar 31 21:14:48 2015 +0000
@@ -27,6 +27,20 @@
     * @param LCDSIZE_Y y size in pixel - optional
     */ 
     ST7565(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name, unsigned int LCDSIZE_X = 132, unsigned  int LCDSIZE_Y = 64);
+    
+    /** Create a BUS display interface
+    * @param displayproto only supports BUS_8
+    * @param buspins array of PinName to group as Bus
+    * @param CS pin connected to CS of display
+    * @param reset pin connected to RESET of display
+    * @param DC pin connected to data/command of display
+    * @param WR pin connected to SDI of display
+    * @param RD pin connected to RS of display
+    * @param name The name used by the parent class to access the interface
+    * @param LCDSIZE_X x size in pixel - optional
+    * @param LCDSIZE_Y y size in pixel - optional
+    */ 
+    ST7565(proto_t displayproto, PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name, unsigned int LCDSIZE_X = 132, unsigned  int LCDSIZE_Y = 64);
   
     /** Create an SPI display interface
     * @param displayproto SPI_8 or SPI_16