UniGraphic-Fork for ST7920-LCD-controller and SH1106. Tested with 128x64 LCD with SPI and 128x64-OLED with IIC
Dependents: UniGraphic-St7920-Test AfficheurUTILECO
Fork of UniGraphic by
Fork of the UniGraphic-Library for monochrome LCDs with ST7920 controller and 128x64-IIC-OLED-Display with SH1106-Controller
Had to adapt LCD for following reasons:
- Give access to screenbuffer buffer[] to parent class
- pixel() and pixel_read() as they are hardware-dependent
- added reset-pin to IIC-Interface
GraphicDisplay:: sends buffer to LCD when auto_update is set to true.
Testprogram for ST7920 can be found here:
https://developer.mbed.org/users/charly/code/UniGraphic-St7920-Test/
Diff: Protocols/SPI8.h
- Revision:
- 0:75ec1b3cde17
- Child:
- 1:ff019d22b275
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Protocols/SPI8.h Thu Feb 12 22:22:47 2015 +0000 @@ -0,0 +1,73 @@ +#ifndef SPI8_H +#define SPI8_H + +#include "mbed.h" +#include "Protocols.h" +//#include "GraphicsDisplay.h" + +class SPI8 : public Protocols +{ + public: + + /** Create an SPI 8bit display interface with 3 control pins + * + * @param SPI mosi + * @param SPI miso + * @param SPI sclk + * @param CS pin connected to CS of display + * @param reset pin connected to RESET of display + * @param DC pin connected to data/command of display + */ + SPI8(PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC); + +protected: + + /** Send command byte to display controller + * + * @param cmd: byte to send + * + */ + virtual void wr_cmd(unsigned char cmd); + + /** Send data byte to display controller + * + * @param data8: byte to send + * + */ + virtual void wr_data8(unsigned char data8); + + /** Send same data byte to display controller multiple times + * + * @param data8: byte to send + * @param count: how many + * + */ + virtual void wr_data8(unsigned char data8, unsigned int count); + + /** Send array of data bytes to display controller + * + * @param data8: unsigned char data array + * @param lenght: lenght of array + * + */ + virtual void wr_data8buf(unsigned char* data8, unsigned int lenght); + + /** HW reset sequence (without display init commands) + */ + virtual void hw_reset(); + + /** Set ChipSelect high or low + * @param enable 0/1 + */ + virtual void BusEnable(bool enable); + + DigitalOut _CS; + +private: + + SPI _spi; + DigitalOut _reset; + DigitalOut _DC; + +}; +#endif \ No newline at end of file