Diff: MPU9250.h

Revision:

0:76dc2aad77bc

Child:

1:c27bb1a0deca

diff -r 000000000000 -r 76dc2aad77bc MPU9250.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/MPU9250.h	Wed Oct 05 10:33:45 2016 +0000
@@ -0,0 +1,174 @@
+#ifndef MPU9250_H
+#define MPU9250_H
+
+#include "mbed.h"
+#include "math.h"
+
+
+class mpu9250
+{
+    I2C i2c;
+public:
+    mpu9250(PinName _sda, PinName _scl);
+    void writeByte(uint8_t address, uint8_t subAddress, uint8_t data);
+    char readByte(uint8_t address, uint8_t subAddress);
+    void readBytes(uint8_t address, uint8_t subAddress, uint8_t count, uint8_t * dest);
+    bool alive();
+    void getGres(uint8_t Gscale);
+    void getAres(uint8_t Ascale);
+    void readAccelData(int16_t * destination) ;
+    void readGyroData(int16_t * destination) ;
+    void readTempData(int16_t * destination);
+    void readAll(int16_t * destinationAcc, int16_t * destinationGyro, int16_t * destinationTemp);
+    void ReadConvertAll(float * destinationAcc, float * destinationGyro, float * destinationTemp);
+    void resetMPU9250() ;
+    void initMPU9250(uint8_t Ascale, uint8_t Gscale);
+    void calibrateMPU9250(float * dest1, float * dest2);
+
+    float aRes, gRes;      // scale resolutions per LSB for the sensors
+    float gyroBias[3];
+    float accelBias[3]; // Bias corrections for gyro and accelerometer
+
+
+private:
+    PinName _SDA_pin;
+    PinName _SCL_pin;
+    float _error;
+};
+
+#endif
+
+
+#define SELF_TEST_X_GYRO 0x00
+#define SELF_TEST_Y_GYRO 0x01
+#define SELF_TEST_Z_GYRO 0x02
+#define SELF_TEST_X_ACCEL 0x0D
+#define SELF_TEST_Y_ACCEL 0x0E
+#define SELF_TEST_Z_ACCEL 0x0F
+
+#define SELF_TEST_A      0x10
+
+#define XG_OFFSET_H      0x13
+#define XG_OFFSET_L      0x14
+#define YG_OFFSET_H      0x15
+#define YG_OFFSET_L      0x16
+#define ZG_OFFSET_H      0x17
+#define ZG_OFFSET_L      0x18
+#define SMPLRT_DIV       0x19
+#define CONFIG           0x1A
+#define GYRO_CONFIG      0x1B
+#define ACCEL_CONFIG     0x1C
+#define ACCEL_CONFIG2    0x1D
+#define LP_ACCEL_ODR     0x1E
+#define WOM_THR          0x1F
+
+#define MOT_DUR          0x20  // Duration counter threshold for motion interrupt generation, 1 kHz rate, LSB = 1 ms
+#define ZMOT_THR         0x21  // Zero-motion detection threshold bits [7:0]
+#define ZRMOT_DUR        0x22  // Duration counter threshold for zero motion interrupt generation, 16 Hz rate, LSB = 64 ms
+
+#define FIFO_EN          0x23
+#define I2C_MST_CTRL     0x24
+#define I2C_SLV0_ADDR    0x25
+#define I2C_SLV0_REG     0x26
+#define I2C_SLV0_CTRL    0x27
+#define I2C_SLV1_ADDR    0x28
+#define I2C_SLV1_REG     0x29
+#define I2C_SLV1_CTRL    0x2A
+#define I2C_SLV2_ADDR    0x2B
+#define I2C_SLV2_REG     0x2C
+#define I2C_SLV2_CTRL    0x2D
+#define I2C_SLV3_ADDR    0x2E
+#define I2C_SLV3_REG     0x2F
+#define I2C_SLV3_CTRL    0x30
+#define I2C_SLV4_ADDR    0x31
+#define I2C_SLV4_REG     0x32
+#define I2C_SLV4_DO      0x33
+#define I2C_SLV4_CTRL    0x34
+#define I2C_SLV4_DI      0x35
+#define I2C_MST_STATUS   0x36
+#define INT_PIN_CFG      0x37
+#define INT_ENABLE       0x38
+#define DMP_INT_STATUS   0x39  // Check DMP interrupt
+#define INT_STATUS       0x3A
+#define ACCEL_XOUT_H     0x3B
+#define ACCEL_XOUT_L     0x3C
+#define ACCEL_YOUT_H     0x3D
+#define ACCEL_YOUT_L     0x3E
+#define ACCEL_ZOUT_H     0x3F
+#define ACCEL_ZOUT_L     0x40
+#define TEMP_OUT_H       0x41
+#define TEMP_OUT_L       0x42
+#define GYRO_XOUT_H      0x43
+#define GYRO_XOUT_L      0x44
+#define GYRO_YOUT_H      0x45
+#define GYRO_YOUT_L      0x46
+#define GYRO_ZOUT_H      0x47
+#define GYRO_ZOUT_L      0x48
+#define EXT_SENS_DATA_00 0x49
+#define EXT_SENS_DATA_01 0x4A
+#define EXT_SENS_DATA_02 0x4B
+#define EXT_SENS_DATA_03 0x4C
+#define EXT_SENS_DATA_04 0x4D
+#define EXT_SENS_DATA_05 0x4E
+#define EXT_SENS_DATA_06 0x4F
+#define EXT_SENS_DATA_07 0x50
+#define EXT_SENS_DATA_08 0x51
+#define EXT_SENS_DATA_09 0x52
+#define EXT_SENS_DATA_10 0x53
+#define EXT_SENS_DATA_11 0x54
+#define EXT_SENS_DATA_12 0x55
+#define EXT_SENS_DATA_13 0x56
+#define EXT_SENS_DATA_14 0x57
+#define EXT_SENS_DATA_15 0x58
+#define EXT_SENS_DATA_16 0x59
+#define EXT_SENS_DATA_17 0x5A
+#define EXT_SENS_DATA_18 0x5B
+#define EXT_SENS_DATA_19 0x5C
+#define EXT_SENS_DATA_20 0x5D
+#define EXT_SENS_DATA_21 0x5E
+#define EXT_SENS_DATA_22 0x5F
+#define EXT_SENS_DATA_23 0x60
+#define MOT_DETECT_STATUS 0x61
+#define I2C_SLV0_DO      0x63
+#define I2C_SLV1_DO      0x64
+#define I2C_SLV2_DO      0x65
+#define I2C_SLV3_DO      0x66
+#define I2C_MST_DELAY_CTRL 0x67
+#define SIGNAL_PATH_RESET  0x68
+#define MOT_DETECT_CTRL  0x69
+#define USER_CTRL        0x6A  // Bit 7 enable DMP, bit 3 reset DMP
+#define PWR_MGMT_1       0x6B // Device defaults to the SLEEP mode
+#define PWR_MGMT_2       0x6C
+#define DMP_BANK         0x6D  // Activates a specific bank in the DMP
+#define DMP_RW_PNT       0x6E  // Set read/write pointer to a specific start address in specified DMP bank
+#define DMP_REG          0x6F  // Register in DMP from which to read or to which to write
+#define DMP_REG_1        0x70
+#define DMP_REG_2        0x71
+#define FIFO_COUNTH      0x72
+#define FIFO_COUNTL      0x73
+#define FIFO_R_W         0x74
+#define WHO_AM_I_MPU9250 0x75 // Should return 0x71
+#define XA_OFFSET_H      0x77
+#define XA_OFFSET_L      0x78
+#define YA_OFFSET_H      0x7A
+#define YA_OFFSET_L      0x7B
+#define ZA_OFFSET_H      0x7D
+#define ZA_OFFSET_L      0x7E
+
+#define GFS_250DPS       0x00
+#define GFS_500DPS       0x08
+#define GFS_1000DPS      0x10
+#define GFS_2000DPS      0x18
+#define AFS_2G           0x00
+#define AFS_4G           0x08
+#define AFS_8G           0x10
+#define AFS_16G          0x18
+
+#define ADO 0
+#if ADO
+#define MPU9250_ADDRESS 0x69<<1  // Device address when ADO = 1
+#else
+#define MPU9250_ADDRESS 0x68<<1  // Device address when ADO = 0
+#endif
+
+