BLE_API - prova invio BLE

Users » carlotara » Code » BLE_API

prova invio BLE

Fork of BLE_API by Bluetooth Low Energy

ble/BLE.h@843:7d22b29f91bf, 2015-11-02 (annotated)

Committer:: rgrover1
Date:: Mon Nov 02 09:09:04 2015 +0000
Revision:: 843:7d22b29f91bf
Parent:: 829:9072de50087b
Child:: 850:32ff6e392630

Synchronized with git rev 84f434a9

Author: Rohit Grover

Fix compiler warnings due to header includes.

Some header include paths have diverged between mbed OS and mbed-classic.

Who changed what in which revision?

User	Revision	Line number	New contents of line
rgrover1	716:11b41f651697	1	/* mbed Microcontroller Library
rgrover1	716:11b41f651697	2	* Copyright (c) 2006-2013 ARM Limited
rgrover1	716:11b41f651697	3	*
rgrover1	716:11b41f651697	4	* Licensed under the Apache License, Version 2.0 (the "License");
rgrover1	716:11b41f651697	5	* you may not use this file except in compliance with the License.
rgrover1	716:11b41f651697	6	* You may obtain a copy of the License at
rgrover1	716:11b41f651697	7	*
rgrover1	716:11b41f651697	8	* http://www.apache.org/licenses/LICENSE-2.0
rgrover1	716:11b41f651697	9	*
rgrover1	716:11b41f651697	10	* Unless required by applicable law or agreed to in writing, software
rgrover1	716:11b41f651697	11	* distributed under the License is distributed on an "AS IS" BASIS,
rgrover1	716:11b41f651697	12	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1	716:11b41f651697	13	* See the License for the specific language governing permissions and
rgrover1	716:11b41f651697	14	* limitations under the License.
rgrover1	716:11b41f651697	15	*/
rgrover1	716:11b41f651697	16
rgrover1	716:11b41f651697	17	#ifndef __BLE_H__
rgrover1	716:11b41f651697	18	#define __BLE_H__
rgrover1	716:11b41f651697	19
rgrover1	716:11b41f651697	20	#include "blecommon.h"
rgrover1	716:11b41f651697	21	#include "Gap.h"
rgrover1	716:11b41f651697	22	#include "GattServer.h"
rgrover1	716:11b41f651697	23	#include "GattClient.h"
rgrover1	716:11b41f651697	24	#include "BLEInstanceBase.h"
rgrover1	716:11b41f651697	25
rgrover1	843:7d22b29f91bf	26	#ifdef YOTTA_CFG_MBED_OS
rgrover1	843:7d22b29f91bf	27	#include "mbed-drivers/mbed_error.h"
rgrover1	843:7d22b29f91bf	28	#else
rgrover1	818:61c62a287194	29	#include "mbed_error.h"
rgrover1	843:7d22b29f91bf	30	#endif
rgrover1	818:61c62a287194	31
rgrover1	716:11b41f651697	32	/**
rgrover1	716:11b41f651697	33	* The base class used to abstract away BLE capable radio transceivers or SOCs,
rgrover1	716:11b41f651697	34	* to enable this BLE API to work with any radio transparently.
rgrover1	716:11b41f651697	35	*/
rgrover1	716:11b41f651697	36	class BLE
rgrover1	716:11b41f651697	37	{
rgrover1	716:11b41f651697	38	public:
rgrover1	716:11b41f651697	39	/**
rgrover1	716:11b41f651697	40	* Initialize the BLE controller. This should be called before using
rgrover1	716:11b41f651697	41	* anything else in the BLE_API.
rgrover1	716:11b41f651697	42	*
rgrover1	716:11b41f651697	43	* init() hands control to the underlying BLE module to accomplish
rgrover1	716:11b41f651697	44	* initialization. This initialization may tacitly depend on other hardware
rgrover1	716:11b41f651697	45	* setup (such as clocks or power-modes) which happens early on during
rgrover1	716:11b41f651697	46	* system startup. It may not be safe to call init() from global static
rgrover1	716:11b41f651697	47	* context where ordering is compiler specific and can't be guaranteed--it
rgrover1	716:11b41f651697	48	* is safe to call BLE::init() from within main().
rgrover1	716:11b41f651697	49	*/
rgrover1	716:11b41f651697	50	ble_error_t init();
rgrover1	716:11b41f651697	51
rgrover1	716:11b41f651697	52	/**
rgrover1	716:11b41f651697	53	* Purge the BLE stack of GATT and GAP state. init() must be called
rgrover1	716:11b41f651697	54	* afterwards to re-instate services and GAP state. This API offers a way to
rgrover1	716:11b41f651697	55	* repopulate the GATT database with new services and characteristics.
rgrover1	716:11b41f651697	56	*/
rgrover1	716:11b41f651697	57	ble_error_t shutdown(void) {
rgrover1	716:11b41f651697	58	clearAdvertisingPayload();
rgrover1	818:61c62a287194	59	if (!transport) {
rgrover1	818:61c62a287194	60	error("bad handle to underlying transport");
rgrover1	818:61c62a287194	61	}
rgrover1	716:11b41f651697	62	return transport->shutdown();
rgrover1	716:11b41f651697	63	}
rgrover1	716:11b41f651697	64
rgrover1	716:11b41f651697	65	/**
rgrover1	716:11b41f651697	66	* This call allows the application to get the BLE stack version information.
rgrover1	716:11b41f651697	67	*
rgrover1	716:11b41f651697	68	* @return A pointer to a const string representing the version.
rgrover1	716:11b41f651697	69	* Note: The string is owned by the BLE_API.
rgrover1	716:11b41f651697	70	*/
rgrover1	716:11b41f651697	71	const char *getVersion(void) {
rgrover1	818:61c62a287194	72	if (!transport) {
rgrover1	818:61c62a287194	73	error("bad handle to underlying transport");
rgrover1	818:61c62a287194	74	}
rgrover1	716:11b41f651697	75	return transport->getVersion();
rgrover1	716:11b41f651697	76	}
rgrover1	716:11b41f651697	77
rgrover1	716:11b41f651697	78	/*
rgrover1	716:11b41f651697	79	* Accessors to GAP. Please refer to Gap.h. All GAP related functionality requires
rgrover1	716:11b41f651697	80	* going through this accessor.
rgrover1	716:11b41f651697	81	*/
rgrover1	716:11b41f651697	82	const Gap &gap() const {
rgrover1	818:61c62a287194	83	if (!transport) {
rgrover1	818:61c62a287194	84	error("bad handle to underlying transport");
rgrover1	818:61c62a287194	85	}
rgrover1	716:11b41f651697	86	return transport->getGap();
rgrover1	716:11b41f651697	87	}
rgrover1	716:11b41f651697	88	Gap &gap() {
rgrover1	818:61c62a287194	89	if (!transport) {
rgrover1	818:61c62a287194	90	error("bad handle to underlying transport");
rgrover1	818:61c62a287194	91	}
rgrover1	716:11b41f651697	92	return transport->getGap();
rgrover1	716:11b41f651697	93	}
rgrover1	716:11b41f651697	94
rgrover1	716:11b41f651697	95	/*
rgrover1	716:11b41f651697	96	* Accessors to GATT Server. Please refer to GattServer.h. All GATTServer related
rgrover1	716:11b41f651697	97	* functionality requires going through this accessor.
rgrover1	716:11b41f651697	98	*/
rgrover1	716:11b41f651697	99	const GattServer& gattServer() const {
rgrover1	818:61c62a287194	100	if (!transport) {
rgrover1	818:61c62a287194	101	error("bad handle to underlying transport");
rgrover1	818:61c62a287194	102	}
rgrover1	716:11b41f651697	103	return transport->getGattServer();
rgrover1	716:11b41f651697	104	}
rgrover1	716:11b41f651697	105	GattServer& gattServer() {
rgrover1	818:61c62a287194	106	if (!transport) {
rgrover1	818:61c62a287194	107	error("bad handle to underlying transport");
rgrover1	818:61c62a287194	108	}
rgrover1	716:11b41f651697	109	return transport->getGattServer();
rgrover1	716:11b41f651697	110	}
rgrover1	716:11b41f651697	111
rgrover1	716:11b41f651697	112	/*
rgrover1	716:11b41f651697	113	* Accessors to GATT Client. Please refer to GattClient.h. All GATTClient related
rgrover1	716:11b41f651697	114	* functionality requires going through this accessor.
rgrover1	716:11b41f651697	115	*/
rgrover1	716:11b41f651697	116	const GattClient& gattClient() const {
rgrover1	818:61c62a287194	117	if (!transport) {
rgrover1	818:61c62a287194	118	error("bad handle to underlying transport");
rgrover1	818:61c62a287194	119	}
rgrover1	716:11b41f651697	120	return transport->getGattClient();
rgrover1	716:11b41f651697	121	}
rgrover1	716:11b41f651697	122	GattClient& gattClient() {
rgrover1	818:61c62a287194	123	if (!transport) {
rgrover1	818:61c62a287194	124	error("bad handle to underlying transport");
rgrover1	818:61c62a287194	125	}
rgrover1	716:11b41f651697	126	return transport->getGattClient();
rgrover1	716:11b41f651697	127	}
rgrover1	716:11b41f651697	128
rgrover1	716:11b41f651697	129	/*
rgrover1	716:11b41f651697	130	* Accessors to Security Manager. Please refer to SecurityManager.h. All
rgrover1	716:11b41f651697	131	* SecurityManager related functionality requires going through this
rgrover1	716:11b41f651697	132	* accessor.
rgrover1	716:11b41f651697	133	*/
rgrover1	716:11b41f651697	134	const SecurityManager& securityManager() const {
rgrover1	818:61c62a287194	135	if (!transport) {
rgrover1	818:61c62a287194	136	error("bad handle to underlying transport");
rgrover1	818:61c62a287194	137	}
rgrover1	716:11b41f651697	138	return transport->getSecurityManager();
rgrover1	716:11b41f651697	139	}
rgrover1	716:11b41f651697	140	SecurityManager& securityManager() {
rgrover1	818:61c62a287194	141	if (!transport) {
rgrover1	818:61c62a287194	142	error("bad handle to underlying transport");
rgrover1	818:61c62a287194	143	}
rgrover1	716:11b41f651697	144	return transport->getSecurityManager();
rgrover1	716:11b41f651697	145	}
rgrover1	716:11b41f651697	146
rgrover1	716:11b41f651697	147	/**
rgrover1	716:11b41f651697	148	* Yield control to the BLE stack or to other tasks waiting for events. This
rgrover1	716:11b41f651697	149	* is a sleep function which will return when there is an application
rgrover1	716:11b41f651697	150	* specific interrupt, but the MCU might wake up several times before
rgrover1	716:11b41f651697	151	* returning (to service the stack). This is not always interchangeable with
rgrover1	716:11b41f651697	152	* WFE().
rgrover1	716:11b41f651697	153	*/
rgrover1	716:11b41f651697	154	void waitForEvent(void) {
rgrover1	818:61c62a287194	155	if (!transport) {
rgrover1	818:61c62a287194	156	error("bad handle to underlying transport");
rgrover1	818:61c62a287194	157	}
rgrover1	716:11b41f651697	158	transport->waitForEvent();
rgrover1	716:11b41f651697	159	}
rgrover1	716:11b41f651697	160
rgrover1	822:a0f080d1e836	161	public:
rgrover1	822:a0f080d1e836	162	typedef unsigned InstanceID_t;
rgrover1	822:a0f080d1e836	163	static const InstanceID_t DEFAULT_INSTANCE = 0;
rgrover1	822:a0f080d1e836	164	#ifndef YOTTA_CFG_BLE_INSTANCES_COUNT
rgrover1	822:a0f080d1e836	165	static const InstanceID_t NUM_INSTANCES = 1;
rgrover1	822:a0f080d1e836	166	#else
rgrover1	822:a0f080d1e836	167	static const InstanceID_t NUM_INSTANCES = YOTTA_CFG_BLE_INSTANCES_COUNT;
rgrover1	822:a0f080d1e836	168	#endif
rgrover1	822:a0f080d1e836	169
rgrover1	822:a0f080d1e836	170	/**
rgrover1	822:a0f080d1e836	171	* Get a reference to the BLE singleton corresponding to a given interface.
rgrover1	822:a0f080d1e836	172	* There is a static array of BLE singletons.
rgrover1	822:a0f080d1e836	173	*
rgrover1	822:a0f080d1e836	174	* @Note: Calling Instance() is preferred over constructing a BLE object
rgrover1	822:a0f080d1e836	175	* directly, as it returns references to singletons.
rgrover1	822:a0f080d1e836	176	*
rgrover1	822:a0f080d1e836	177	* @param[in] id
rgrover1	822:a0f080d1e836	178	* Instance-ID. This should be less than NUM_INSTANCES in order
rgrover1	822:a0f080d1e836	179	* for the returned BLE singleton to be useful.
rgrover1	822:a0f080d1e836	180	*
rgrover1	822:a0f080d1e836	181	* @return a reference to a single object
rgrover1	822:a0f080d1e836	182	*/
rgrover1	822:a0f080d1e836	183	static BLE &Instance(InstanceID_t id = DEFAULT_INSTANCE);
rgrover1	822:a0f080d1e836	184
rgrover1	822:a0f080d1e836	185	/**
rgrover1	822:a0f080d1e836	186	* Constructor for a handle to a BLE instance (i.e. BLE stack). BLE handles
rgrover1	822:a0f080d1e836	187	* are thin wrappers around a transport object (i.e. ptr. to
rgrover1	822:a0f080d1e836	188	* BLEInstanceBase).
rgrover1	822:a0f080d1e836	189	*
rgrover1	822:a0f080d1e836	190	* BLE objects are are better created as singletons accessed through the
rgrover1	822:a0f080d1e836	191	* Instance() method. If multiple BLE handles are constructed for the same
rgrover1	822:a0f080d1e836	192	* interface (using this constructor), they will share the same underlying
rgrover1	822:a0f080d1e836	193	* transport object.
rgrover1	822:a0f080d1e836	194	*/
rgrover1	822:a0f080d1e836	195	BLE(InstanceID_t instanceID = DEFAULT_INSTANCE);
rgrover1	822:a0f080d1e836	196
rgrover1	822:a0f080d1e836	197
rgrover1	716:11b41f651697	198	/*
rgrover1	716:11b41f651697	199	* Deprecation alert!
rgrover1	716:11b41f651697	200	* All of the following are deprecated and may be dropped in a future
rgrover1	716:11b41f651697	201	* release. Documentation should refer to alternative APIs.
rgrover1	716:11b41f651697	202	*/
rgrover1	716:11b41f651697	203
rgrover1	716:11b41f651697	204	/* GAP specific APIs. */
rgrover1	716:11b41f651697	205	public:
rgrover1	716:11b41f651697	206	/**
rgrover1	716:11b41f651697	207	* Set the BTLE MAC address and type.
rgrover1	716:11b41f651697	208	* @return BLE_ERROR_NONE on success.
rgrover1	716:11b41f651697	209	*
rgrover1	716:11b41f651697	210	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	211	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	212	* ble.setAddress(...) should be replaced with
rgrover1	716:11b41f651697	213	* ble.gap().setAddress(...).
rgrover1	716:11b41f651697	214	*/
rgrover1	716:11b41f651697	215	ble_error_t setAddress(Gap::AddressType_t type, const Gap::Address_t address) {
rgrover1	716:11b41f651697	216	return gap().setAddress(type, address);
rgrover1	716:11b41f651697	217	}
rgrover1	716:11b41f651697	218
rgrover1	716:11b41f651697	219	/**
rgrover1	716:11b41f651697	220	* Fetch the BTLE MAC address and type.
rgrover1	716:11b41f651697	221	* @return BLE_ERROR_NONE on success.
rgrover1	716:11b41f651697	222	*
rgrover1	716:11b41f651697	223	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	224	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	225	* ble.getAddress(...) should be replaced with
rgrover1	716:11b41f651697	226	* ble.gap().getAddress(...).
rgrover1	716:11b41f651697	227	*/
rgrover1	716:11b41f651697	228	ble_error_t getAddress(Gap::AddressType_t *typeP, Gap::Address_t address) {
rgrover1	716:11b41f651697	229	return gap().getAddress(typeP, address);
rgrover1	716:11b41f651697	230	}
rgrover1	716:11b41f651697	231
rgrover1	716:11b41f651697	232	/**
rgrover1	716:11b41f651697	233	* Set the GAP advertising mode to use for this device.
rgrover1	716:11b41f651697	234	*
rgrover1	716:11b41f651697	235	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	236	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	237	* ble.setAdvertisingType(...) should be replaced with
rgrover1	716:11b41f651697	238	* ble.gap().setAdvertisingType(...).
rgrover1	716:11b41f651697	239	*/
rgrover1	716:11b41f651697	240	void setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) {
rgrover1	716:11b41f651697	241	gap().setAdvertisingType(advType);
rgrover1	716:11b41f651697	242	}
rgrover1	716:11b41f651697	243
rgrover1	716:11b41f651697	244	/**
rgrover1	716:11b41f651697	245	* @param[in] interval
rgrover1	716:11b41f651697	246	* Advertising interval in units of milliseconds. Advertising
rgrover1	716:11b41f651697	247	* is disabled if interval is 0. If interval is smaller than
rgrover1	716:11b41f651697	248	* the minimum supported value, then the minimum supported
rgrover1	716:11b41f651697	249	* value is used instead. This minimum value can be discovered
rgrover1	716:11b41f651697	250	* using getMinAdvertisingInterval().
rgrover1	716:11b41f651697	251	*
rgrover1	716:11b41f651697	252	* This field must be set to 0 if connectionMode is equal
rgrover1	716:11b41f651697	253	* to ADV_CONNECTABLE_DIRECTED.
rgrover1	716:11b41f651697	254	*
rgrover1	716:11b41f651697	255	* @note: Decreasing this value will allow central devices to detect a
rgrover1	716:11b41f651697	256	* peripheral faster at the expense of more power being used by the radio
rgrover1	716:11b41f651697	257	* due to the higher data transmit rate.
rgrover1	716:11b41f651697	258	*
rgrover1	716:11b41f651697	259	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	260	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	261	* ble.setAdvertisingInterval(...) should be replaced with
rgrover1	716:11b41f651697	262	* ble.gap().setAdvertisingInterval(...).
rgrover1	716:11b41f651697	263	*
rgrover1	716:11b41f651697	264	* @note: [WARNING] This API previously used 0.625ms as the unit for its
rgrover1	716:11b41f651697	265	* 'interval' argument. That required an explicit conversion from
rgrover1	716:11b41f651697	266	* milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
rgrover1	716:11b41f651697	267	* no longer required as the new units are milliseconds. Any application
rgrover1	716:11b41f651697	268	* code depending on the old semantics would need to be updated accordingly.
rgrover1	716:11b41f651697	269	*/
rgrover1	716:11b41f651697	270	void setAdvertisingInterval(uint16_t interval) {
rgrover1	716:11b41f651697	271	gap().setAdvertisingInterval(interval);
rgrover1	716:11b41f651697	272	}
rgrover1	716:11b41f651697	273
rgrover1	716:11b41f651697	274	/**
rgrover1	716:11b41f651697	275	* @return Minimum Advertising interval in milliseconds.
rgrover1	716:11b41f651697	276	*
rgrover1	716:11b41f651697	277	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	278	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	279	* ble.getMinAdvertisingInterval(...) should be replaced with
rgrover1	716:11b41f651697	280	* ble.gap().getMinAdvertisingInterval(...).
rgrover1	716:11b41f651697	281	*/
rgrover1	716:11b41f651697	282	uint16_t getMinAdvertisingInterval(void) const {
rgrover1	716:11b41f651697	283	return gap().getMinAdvertisingInterval();
rgrover1	716:11b41f651697	284	}
rgrover1	716:11b41f651697	285
rgrover1	716:11b41f651697	286	/**
rgrover1	716:11b41f651697	287	* @return Minimum Advertising interval in milliseconds for non-connectible mode.
rgrover1	716:11b41f651697	288	*
rgrover1	716:11b41f651697	289	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	290	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	291	* ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
rgrover1	716:11b41f651697	292	* ble.gap().getMinNonConnectableAdvertisingInterval(...).
rgrover1	716:11b41f651697	293	*/
rgrover1	716:11b41f651697	294	uint16_t getMinNonConnectableAdvertisingInterval(void) const {
rgrover1	716:11b41f651697	295	return gap().getMinNonConnectableAdvertisingInterval();
rgrover1	716:11b41f651697	296	}
rgrover1	716:11b41f651697	297
rgrover1	716:11b41f651697	298	/**
rgrover1	716:11b41f651697	299	* @return Maximum Advertising interval in milliseconds.
rgrover1	716:11b41f651697	300	*
rgrover1	716:11b41f651697	301	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	302	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	303	* ble.getMaxAdvertisingInterval(...) should be replaced with
rgrover1	716:11b41f651697	304	* ble.gap().getMaxAdvertisingInterval(...).
rgrover1	716:11b41f651697	305	*/
rgrover1	716:11b41f651697	306	uint16_t getMaxAdvertisingInterval(void) const {
rgrover1	716:11b41f651697	307	return gap().getMaxAdvertisingInterval();
rgrover1	716:11b41f651697	308	}
rgrover1	716:11b41f651697	309
rgrover1	716:11b41f651697	310	/**
rgrover1	716:11b41f651697	311	* @param[in] timeout
rgrover1	716:11b41f651697	312	* Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
rgrover1	716:11b41f651697	313	* and 16383). Use 0 to disable the advertising timeout.
rgrover1	716:11b41f651697	314	*
rgrover1	716:11b41f651697	315	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	316	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	317	* ble.setAdvertisingTimeout(...) should be replaced with
rgrover1	716:11b41f651697	318	* ble.gap().setAdvertisingTimeout(...).
rgrover1	716:11b41f651697	319	*/
rgrover1	716:11b41f651697	320	void setAdvertisingTimeout(uint16_t timeout) {
rgrover1	716:11b41f651697	321	gap().setAdvertisingTimeout(timeout);
rgrover1	716:11b41f651697	322	}
rgrover1	716:11b41f651697	323
rgrover1	716:11b41f651697	324	/**
rgrover1	716:11b41f651697	325	* Setup a particular, user-constructed set of advertisement parameters for
rgrover1	716:11b41f651697	326	* the underlying stack. It would be uncommon for this API to be used
rgrover1	716:11b41f651697	327	* directly; there are other APIs to tweak advertisement parameters
rgrover1	716:11b41f651697	328	* individually (see above).
rgrover1	716:11b41f651697	329	*
rgrover1	716:11b41f651697	330	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	331	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	332	* ble.setAdvertisingParams(...) should be replaced with
rgrover1	716:11b41f651697	333	* ble.gap().setAdvertisingParams(...).
rgrover1	716:11b41f651697	334	*/
rgrover1	716:11b41f651697	335	void setAdvertisingParams(const GapAdvertisingParams &advParams) {
rgrover1	716:11b41f651697	336	gap().setAdvertisingParams(advParams);
rgrover1	716:11b41f651697	337	}
rgrover1	716:11b41f651697	338
rgrover1	716:11b41f651697	339	/**
rgrover1	716:11b41f651697	340	* @return Read back advertising parameters. Useful for storing and
rgrover1	716:11b41f651697	341	* restoring parameters rapidly.
rgrover1	716:11b41f651697	342	*
rgrover1	716:11b41f651697	343	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	344	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	345	* ble.getAdvertisingParams(...) should be replaced with
rgrover1	716:11b41f651697	346	* ble.gap().getAdvertisingParams(...).
rgrover1	716:11b41f651697	347	*/
rgrover1	716:11b41f651697	348	const GapAdvertisingParams &getAdvertisingParams(void) const {
rgrover1	716:11b41f651697	349	return gap().getAdvertisingParams();
rgrover1	716:11b41f651697	350	}
rgrover1	716:11b41f651697	351
rgrover1	716:11b41f651697	352	/**
rgrover1	716:11b41f651697	353	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	716:11b41f651697	354	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1	716:11b41f651697	355	* as an additional 31 bytes if the advertising payload proves to be too
rgrover1	716:11b41f651697	356	* small.
rgrover1	716:11b41f651697	357	*
rgrover1	716:11b41f651697	358	* @param[in] flags
rgrover1	716:11b41f651697	359	* The flags to be added. Please refer to
rgrover1	716:11b41f651697	360	* GapAdvertisingData::Flags for valid flags. Multiple
rgrover1	716:11b41f651697	361	* flags may be specified in combination.
rgrover1	716:11b41f651697	362	*
rgrover1	716:11b41f651697	363	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	364	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	365	* ble.accumulateAdvertisingPayload(flags) should be replaced with
rgrover1	716:11b41f651697	366	* ble.gap().accumulateAdvertisingPayload(flags).
rgrover1	716:11b41f651697	367	*/
rgrover1	716:11b41f651697	368	ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
rgrover1	716:11b41f651697	369	return gap().accumulateAdvertisingPayload(flags);
rgrover1	716:11b41f651697	370	}
rgrover1	716:11b41f651697	371
rgrover1	716:11b41f651697	372	/**
rgrover1	716:11b41f651697	373	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	716:11b41f651697	374	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1	716:11b41f651697	375	* as an additional 31 bytes if the advertising payload proves to be too
rgrover1	716:11b41f651697	376	* small.
rgrover1	716:11b41f651697	377	*
rgrover1	716:11b41f651697	378	* @param[in] app
rgrover1	716:11b41f651697	379	* The appearance of the peripheral.
rgrover1	716:11b41f651697	380	*
rgrover1	716:11b41f651697	381	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	382	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	383	* ble.accumulateAdvertisingPayload(appearance) should be replaced with
rgrover1	716:11b41f651697	384	* ble.gap().accumulateAdvertisingPayload(appearance).
rgrover1	716:11b41f651697	385	*/
rgrover1	716:11b41f651697	386	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
rgrover1	716:11b41f651697	387	return gap().accumulateAdvertisingPayload(app);
rgrover1	716:11b41f651697	388	}
rgrover1	716:11b41f651697	389
rgrover1	716:11b41f651697	390	/**
rgrover1	716:11b41f651697	391	* Accumulate an AD structure in the advertising payload. Please note that
rgrover1	716:11b41f651697	392	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1	716:11b41f651697	393	* as an additional 31 bytes if the advertising payload proves to be too
rgrover1	716:11b41f651697	394	* small.
rgrover1	716:11b41f651697	395	*
rgrover1	716:11b41f651697	396	* @param[in] app
rgrover1	716:11b41f651697	397	* The max transmit power to be used by the controller. This
rgrover1	716:11b41f651697	398	* is only a hint.
rgrover1	716:11b41f651697	399	*
rgrover1	716:11b41f651697	400	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	401	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	402	* ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
rgrover1	716:11b41f651697	403	* ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
rgrover1	716:11b41f651697	404	*/
rgrover1	716:11b41f651697	405	ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
rgrover1	716:11b41f651697	406	return gap().accumulateAdvertisingPayloadTxPower(power);
rgrover1	716:11b41f651697	407	}
rgrover1	716:11b41f651697	408
rgrover1	716:11b41f651697	409	/**
rgrover1	716:11b41f651697	410	* Accumulate a variable length byte-stream as an AD structure in the
rgrover1	716:11b41f651697	411	* advertising payload. Please note that the payload is limited to 31 bytes.
rgrover1	716:11b41f651697	412	* The SCAN_RESPONSE message may be used as an additional 31 bytes if the
rgrover1	716:11b41f651697	413	* advertising payload proves to be too small.
rgrover1	716:11b41f651697	414	*
rgrover1	716:11b41f651697	415	* @param type The type which describes the variable length data.
rgrover1	716:11b41f651697	416	* @param data data bytes.
rgrover1	716:11b41f651697	417	* @param len length of data.
rgrover1	716:11b41f651697	418	*
rgrover1	716:11b41f651697	419	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	420	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	421	* ble.accumulateAdvertisingPayload(...) should be replaced with
rgrover1	716:11b41f651697	422	* ble.gap().accumulateAdvertisingPayload(...).
rgrover1	716:11b41f651697	423	*/
rgrover1	716:11b41f651697	424	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1	716:11b41f651697	425	return gap().accumulateAdvertisingPayload(type, data, len);
rgrover1	716:11b41f651697	426	}
rgrover1	716:11b41f651697	427
rgrover1	716:11b41f651697	428	/**
rgrover1	716:11b41f651697	429	* Setup a particular, user-constructed advertisement payload for the
rgrover1	716:11b41f651697	430	* underlying stack. It would be uncommon for this API to be used directly;
rgrover1	716:11b41f651697	431	* there are other APIs to build an advertisement payload (see above).
rgrover1	716:11b41f651697	432	*
rgrover1	716:11b41f651697	433	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	434	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	435	* ble.setAdvertisingData(...) should be replaced with
rgrover1	716:11b41f651697	436	* ble.gap().setAdvertisingPayload(...).
rgrover1	716:11b41f651697	437	*/
rgrover1	716:11b41f651697	438	ble_error_t setAdvertisingData(const GapAdvertisingData &advData) {
rgrover1	716:11b41f651697	439	return gap().setAdvertisingPayload(advData);
rgrover1	716:11b41f651697	440	}
rgrover1	716:11b41f651697	441
rgrover1	716:11b41f651697	442	/**
rgrover1	716:11b41f651697	443	* @return Read back advertising data. Useful for storing and
rgrover1	716:11b41f651697	444	* restoring payload.
rgrover1	716:11b41f651697	445	*
rgrover1	716:11b41f651697	446	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	447	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	448	* ble.getAdvertisingData(...) should be replaced with
rgrover1	716:11b41f651697	449	* ble.gap().getAdvertisingPayload()(...).
rgrover1	716:11b41f651697	450	*/
rgrover1	716:11b41f651697	451	const GapAdvertisingData &getAdvertisingData(void) const {
rgrover1	716:11b41f651697	452	return gap().getAdvertisingPayload();
rgrover1	716:11b41f651697	453	}
rgrover1	716:11b41f651697	454
rgrover1	716:11b41f651697	455	/**
rgrover1	716:11b41f651697	456	* Reset any advertising payload prepared from prior calls to
rgrover1	716:11b41f651697	457	* accumulateAdvertisingPayload(). This automatically propagates the re-
rgrover1	716:11b41f651697	458	* initialized adv payload to the underlying stack.
rgrover1	716:11b41f651697	459	*
rgrover1	716:11b41f651697	460	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	461	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	462	* ble.clearAdvertisingPayload(...) should be replaced with
rgrover1	716:11b41f651697	463	* ble.gap().clearAdvertisingPayload(...).
rgrover1	716:11b41f651697	464	*/
rgrover1	716:11b41f651697	465	void clearAdvertisingPayload(void) {
rgrover1	716:11b41f651697	466	gap().clearAdvertisingPayload();
rgrover1	716:11b41f651697	467	}
rgrover1	716:11b41f651697	468
rgrover1	716:11b41f651697	469	/**
rgrover1	716:11b41f651697	470	* This API is deprecated and resolves to a no-operation. It is left here
rgrover1	716:11b41f651697	471	* to allow older code to compile. Please avoid using this API in new code.
rgrover1	716:11b41f651697	472	* This API will be dropped in a future release.
rgrover1	716:11b41f651697	473	*
rgrover1	716:11b41f651697	474	* Formerly, it would be used to dynamically reset the accumulated advertising
rgrover1	716:11b41f651697	475	* payload and scanResponse; to do this, the application would clear and re-
rgrover1	716:11b41f651697	476	* accumulate a new advertising payload (and scanResponse) before using this
rgrover1	716:11b41f651697	477	* API. Updates to the underlying advertisement payload now happen
rgrover1	716:11b41f651697	478	* implicitly.
rgrover1	716:11b41f651697	479	*/
rgrover1	716:11b41f651697	480	ble_error_t setAdvertisingPayload(void) {
rgrover1	716:11b41f651697	481	return BLE_ERROR_NONE;
rgrover1	716:11b41f651697	482	}
rgrover1	716:11b41f651697	483
rgrover1	716:11b41f651697	484	/**
rgrover1	716:11b41f651697	485	* Accumulate a variable length byte-stream as an AD structure in the
rgrover1	716:11b41f651697	486	* scanResponse payload.
rgrover1	716:11b41f651697	487	*
rgrover1	716:11b41f651697	488	* @param[in] type The type which describes the variable length data.
rgrover1	716:11b41f651697	489	* @param[in] data data bytes.
rgrover1	716:11b41f651697	490	* @param[in] len length of data.
rgrover1	716:11b41f651697	491	*
rgrover1	716:11b41f651697	492	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	493	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	494	* ble.accumulateScanResponse(...) should be replaced with
rgrover1	716:11b41f651697	495	* ble.gap().accumulateScanResponse(...).
rgrover1	716:11b41f651697	496	*/
rgrover1	716:11b41f651697	497	ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1	716:11b41f651697	498	return gap().accumulateScanResponse(type, data, len);
rgrover1	716:11b41f651697	499	}
rgrover1	716:11b41f651697	500
rgrover1	716:11b41f651697	501	/**
rgrover1	716:11b41f651697	502	* Reset any scan response prepared from prior calls to
rgrover1	716:11b41f651697	503	* accumulateScanResponse().
rgrover1	716:11b41f651697	504	*
rgrover1	716:11b41f651697	505	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	506	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	507	* ble.clearScanResponse(...) should be replaced with
rgrover1	716:11b41f651697	508	* ble.gap().clearScanResponse(...).
rgrover1	716:11b41f651697	509	*/
rgrover1	716:11b41f651697	510	void clearScanResponse(void) {
rgrover1	716:11b41f651697	511	gap().clearScanResponse();
rgrover1	716:11b41f651697	512	}
rgrover1	716:11b41f651697	513
rgrover1	716:11b41f651697	514	/**
rgrover1	716:11b41f651697	515	* Start advertising.
rgrover1	716:11b41f651697	516	*
rgrover1	716:11b41f651697	517	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	518	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	519	* ble.startAdvertising(...) should be replaced with
rgrover1	716:11b41f651697	520	* ble.gap().startAdvertising(...).
rgrover1	716:11b41f651697	521	*/
rgrover1	716:11b41f651697	522	ble_error_t startAdvertising(void) {
rgrover1	716:11b41f651697	523	return gap().startAdvertising();
rgrover1	716:11b41f651697	524	}
rgrover1	716:11b41f651697	525
rgrover1	716:11b41f651697	526	/**
rgrover1	716:11b41f651697	527	* Stop advertising.
rgrover1	716:11b41f651697	528	*
rgrover1	716:11b41f651697	529	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	530	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	531	* ble.stopAdvertising(...) should be replaced with
rgrover1	716:11b41f651697	532	* ble.gap().stopAdvertising(...).
rgrover1	716:11b41f651697	533	*/
rgrover1	716:11b41f651697	534	ble_error_t stopAdvertising(void) {
rgrover1	716:11b41f651697	535	return gap().stopAdvertising();
rgrover1	716:11b41f651697	536	}
rgrover1	716:11b41f651697	537
rgrover1	716:11b41f651697	538	/**
rgrover1	716:11b41f651697	539	* Setup parameters for GAP scanning--i.e. observer mode.
rgrover1	716:11b41f651697	540	* @param[in] interval
rgrover1	716:11b41f651697	541	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	716:11b41f651697	542	* @param[in] window
rgrover1	716:11b41f651697	543	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	716:11b41f651697	544	* @param[in] timeout
rgrover1	716:11b41f651697	545	* Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1	716:11b41f651697	546	* @param[in] activeScanning
rgrover1	716:11b41f651697	547	* Set to True if active-scanning is required. This is used to fetch the
rgrover1	716:11b41f651697	548	* scan response from a peer if possible.
rgrover1	716:11b41f651697	549	*
rgrover1	716:11b41f651697	550	* The scanning window divided by the interval determines the duty cycle for
rgrover1	716:11b41f651697	551	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	716:11b41f651697	552	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	716:11b41f651697	553	* to have the interval and window set to the same value. In this case,
rgrover1	716:11b41f651697	554	* scanning is continuous, with a change of scanning frequency once every
rgrover1	716:11b41f651697	555	* interval.
rgrover1	716:11b41f651697	556	*
rgrover1	716:11b41f651697	557	* Once the scanning parameters have been configured, scanning can be
rgrover1	716:11b41f651697	558	* enabled by using startScan().
rgrover1	716:11b41f651697	559	*
rgrover1	716:11b41f651697	560	* @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1	716:11b41f651697	561	*
rgrover1	716:11b41f651697	562	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	563	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	564	* ble.setScanParams(...) should be replaced with
rgrover1	716:11b41f651697	565	* ble.gap().setScanParams(...).
rgrover1	716:11b41f651697	566	*/
rgrover1	716:11b41f651697	567	ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
rgrover1	716:11b41f651697	568	uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
rgrover1	716:11b41f651697	569	uint16_t timeout = 0,
rgrover1	716:11b41f651697	570	bool activeScanning = false) {
rgrover1	716:11b41f651697	571	return gap().setScanParams(interval, window, timeout, activeScanning);
rgrover1	716:11b41f651697	572	}
rgrover1	716:11b41f651697	573
rgrover1	716:11b41f651697	574	/**
rgrover1	716:11b41f651697	575	* Setup the scanInterval parameter for GAP scanning--i.e. observer mode.
rgrover1	716:11b41f651697	576	* @param[in] interval
rgrover1	716:11b41f651697	577	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	716:11b41f651697	578	*
rgrover1	716:11b41f651697	579	* The scanning window divided by the interval determines the duty cycle for
rgrover1	716:11b41f651697	580	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	716:11b41f651697	581	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	716:11b41f651697	582	* to have the interval and window set to the same value. In this case,
rgrover1	716:11b41f651697	583	* scanning is continuous, with a change of scanning frequency once every
rgrover1	716:11b41f651697	584	* interval.
rgrover1	716:11b41f651697	585	*
rgrover1	716:11b41f651697	586	* Once the scanning parameters have been configured, scanning can be
rgrover1	716:11b41f651697	587	* enabled by using startScan().
rgrover1	716:11b41f651697	588	*
rgrover1	716:11b41f651697	589	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	590	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	591	* ble.setScanInterval(interval) should be replaced with
rgrover1	716:11b41f651697	592	* ble.gap().setScanInterval(interval).
rgrover1	716:11b41f651697	593	*/
rgrover1	716:11b41f651697	594	ble_error_t setScanInterval(uint16_t interval) {
rgrover1	716:11b41f651697	595	return gap().setScanInterval(interval);
rgrover1	716:11b41f651697	596	}
rgrover1	716:11b41f651697	597
rgrover1	716:11b41f651697	598	/**
rgrover1	716:11b41f651697	599	* Setup the scanWindow parameter for GAP scanning--i.e. observer mode.
rgrover1	716:11b41f651697	600	* @param[in] window
rgrover1	716:11b41f651697	601	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1	716:11b41f651697	602	*
rgrover1	716:11b41f651697	603	* The scanning window divided by the interval determines the duty cycle for
rgrover1	716:11b41f651697	604	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	716:11b41f651697	605	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	716:11b41f651697	606	* to have the interval and window set to the same value. In this case,
rgrover1	716:11b41f651697	607	* scanning is continuous, with a change of scanning frequency once every
rgrover1	716:11b41f651697	608	* interval.
rgrover1	716:11b41f651697	609	*
rgrover1	716:11b41f651697	610	* Once the scanning parameters have been configured, scanning can be
rgrover1	716:11b41f651697	611	* enabled by using startScan().
rgrover1	716:11b41f651697	612	*
rgrover1	716:11b41f651697	613	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	614	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	615	* ble.setScanWindow(window) should be replaced with
rgrover1	716:11b41f651697	616	* ble.gap().setScanWindow(window).
rgrover1	716:11b41f651697	617	*/
rgrover1	716:11b41f651697	618	ble_error_t setScanWindow(uint16_t window) {
rgrover1	716:11b41f651697	619	return gap().setScanWindow(window);
rgrover1	716:11b41f651697	620	}
rgrover1	716:11b41f651697	621
rgrover1	716:11b41f651697	622	/**
rgrover1	716:11b41f651697	623	* Setup parameters for GAP scanning--i.e. observer mode.
rgrover1	716:11b41f651697	624	* @param[in] timeout
rgrover1	716:11b41f651697	625	* Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1	716:11b41f651697	626	*
rgrover1	716:11b41f651697	627	* The scanning window divided by the interval determines the duty cycle for
rgrover1	716:11b41f651697	628	* scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1	716:11b41f651697	629	* then the controller will scan for 10 percent of the time. It is possible
rgrover1	716:11b41f651697	630	* to have the interval and window set to the same value. In this case,
rgrover1	716:11b41f651697	631	* scanning is continuous, with a change of scanning frequency once every
rgrover1	716:11b41f651697	632	* interval.
rgrover1	716:11b41f651697	633	*
rgrover1	716:11b41f651697	634	* Once the scanning parameters have been configured, scanning can be
rgrover1	716:11b41f651697	635	* enabled by using startScan().
rgrover1	716:11b41f651697	636	*
rgrover1	716:11b41f651697	637	* @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1	716:11b41f651697	638	*
rgrover1	716:11b41f651697	639	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	640	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	641	* ble.setScanTimeout(...) should be replaced with
rgrover1	716:11b41f651697	642	* ble.gap().setScanTimeout(...).
rgrover1	716:11b41f651697	643	*/
rgrover1	716:11b41f651697	644	ble_error_t setScanTimeout(uint16_t timeout) {
rgrover1	716:11b41f651697	645	return gap().setScanTimeout(timeout);
rgrover1	716:11b41f651697	646	}
rgrover1	716:11b41f651697	647
rgrover1	716:11b41f651697	648	/**
rgrover1	716:11b41f651697	649	* Setup parameters for GAP scanning--i.e. observer mode.
rgrover1	716:11b41f651697	650	* @param[in] activeScanning
rgrover1	716:11b41f651697	651	* Set to True if active-scanning is required. This is used to fetch the
rgrover1	716:11b41f651697	652	* scan response from a peer if possible.
rgrover1	716:11b41f651697	653	*
rgrover1	716:11b41f651697	654	* Once the scanning parameters have been configured, scanning can be
rgrover1	716:11b41f651697	655	* enabled by using startScan().
rgrover1	716:11b41f651697	656	*
rgrover1	716:11b41f651697	657	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	658	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	659	* ble.setActiveScan(...) should be replaced with
rgrover1	716:11b41f651697	660	* ble.gap().setActiveScanning(...).
rgrover1	716:11b41f651697	661	*/
rgrover1	716:11b41f651697	662	void setActiveScan(bool activeScanning) {
rgrover1	716:11b41f651697	663	gap().setActiveScanning(activeScanning);
rgrover1	716:11b41f651697	664	}
rgrover1	716:11b41f651697	665
rgrover1	716:11b41f651697	666	/**
rgrover1	716:11b41f651697	667	* Start scanning (Observer Procedure) based on the parameters currently in
rgrover1	716:11b41f651697	668	* effect.
rgrover1	716:11b41f651697	669	*
rgrover1	716:11b41f651697	670	* @param[in] callback
rgrover1	716:11b41f651697	671	* The application specific callback to be invoked upon
rgrover1	716:11b41f651697	672	* receiving every advertisement report. This can be passed in
rgrover1	716:11b41f651697	673	* as NULL, in which case scanning may not be enabled at all.
rgrover1	716:11b41f651697	674	*
rgrover1	716:11b41f651697	675	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	676	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	677	* ble.startScan(callback) should be replaced with
rgrover1	716:11b41f651697	678	* ble.gap().startScan(callback).
rgrover1	716:11b41f651697	679	*/
rgrover1	716:11b41f651697	680	ble_error_t startScan(void (callback)(const Gap::AdvertisementCallbackParams_t params)) {
rgrover1	716:11b41f651697	681	return gap().startScan(callback);
rgrover1	716:11b41f651697	682	}
rgrover1	716:11b41f651697	683
rgrover1	716:11b41f651697	684	/**
rgrover1	716:11b41f651697	685	* Same as above, but this takes an (object, method) pair for a callback.
rgrover1	716:11b41f651697	686	*
rgrover1	716:11b41f651697	687	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	688	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	689	* ble.startScan(callback) should be replaced with
rgrover1	716:11b41f651697	690	* ble.gap().startScan(object, callback).
rgrover1	716:11b41f651697	691	*/
rgrover1	716:11b41f651697	692	template<typename T>
rgrover1	716:11b41f651697	693	ble_error_t startScan(T object, void (T::memberCallback)(const Gap::AdvertisementCallbackParams_t *params));
rgrover1	716:11b41f651697	694
rgrover1	716:11b41f651697	695	/**
rgrover1	716:11b41f651697	696	* Stop scanning. The current scanning parameters remain in effect.
rgrover1	716:11b41f651697	697	*
rgrover1	716:11b41f651697	698	* @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
rgrover1	716:11b41f651697	699	*
rgrover1	716:11b41f651697	700	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	701	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	702	* ble.stopScan() should be replaced with
rgrover1	716:11b41f651697	703	* ble.gap().stopScan().
rgrover1	716:11b41f651697	704	*/
rgrover1	716:11b41f651697	705	ble_error_t stopScan(void) {
rgrover1	716:11b41f651697	706	return gap().stopScan();
rgrover1	716:11b41f651697	707	}
rgrover1	716:11b41f651697	708
rgrover1	716:11b41f651697	709	/**
rgrover1	716:11b41f651697	710	* Create a connection (GAP Link Establishment).
rgrover1	716:11b41f651697	711	* @param peerAddr
rgrover1	716:11b41f651697	712	* 48-bit address, LSB format.
rgrover1	716:11b41f651697	713	* @param peerAddrType
rgrover1	716:11b41f651697	714	* Address type of the peer.
rgrover1	716:11b41f651697	715	* @param connectionParams
rgrover1	716:11b41f651697	716	* Connection parameters.
rgrover1	716:11b41f651697	717	* @param scanParams
rgrover1	716:11b41f651697	718	* Paramters to be used while scanning for the peer.
rgrover1	716:11b41f651697	719	* @return BLE_ERROR_NONE if connection establishment procedure is started
rgrover1	716:11b41f651697	720	* successfully. The onConnection callback (if set) will be invoked upon
rgrover1	716:11b41f651697	721	* a connection event.
rgrover1	716:11b41f651697	722	*
rgrover1	716:11b41f651697	723	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	724	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	725	* ble.connect(...) should be replaced with
rgrover1	716:11b41f651697	726	* ble.gap().connect(...).
rgrover1	716:11b41f651697	727	*/
rgrover1	716:11b41f651697	728	ble_error_t connect(const Gap::Address_t peerAddr,
rgrover1	716:11b41f651697	729	Gap::AddressType_t peerAddrType = Gap::ADDR_TYPE_RANDOM_STATIC,
rgrover1	716:11b41f651697	730	const Gap::ConnectionParams_t *connectionParams = NULL,
rgrover1	716:11b41f651697	731	const GapScanningParams *scanParams = NULL) {
rgrover1	716:11b41f651697	732	return gap().connect(peerAddr, peerAddrType, connectionParams, scanParams);
rgrover1	716:11b41f651697	733	}
rgrover1	716:11b41f651697	734
rgrover1	716:11b41f651697	735	/**
rgrover1	716:11b41f651697	736	* This call initiates the disconnection procedure, and its completion will
rgrover1	716:11b41f651697	737	* be communicated to the application with an invocation of the
rgrover1	716:11b41f651697	738	* onDisconnection callback.
rgrover1	716:11b41f651697	739	*
rgrover1	716:11b41f651697	740	* @param[in] connectionHandle
rgrover1	716:11b41f651697	741	* @param[in] reason
rgrover1	716:11b41f651697	742	* The reason for disconnection to be sent back to the peer.
rgrover1	716:11b41f651697	743	*/
rgrover1	716:11b41f651697	744	ble_error_t disconnect(Gap::Handle_t connectionHandle, Gap::DisconnectionReason_t reason) {
rgrover1	716:11b41f651697	745	return gap().disconnect(connectionHandle, reason);
rgrover1	716:11b41f651697	746	}
rgrover1	716:11b41f651697	747
rgrover1	716:11b41f651697	748	/**
rgrover1	716:11b41f651697	749	* This call initiates the disconnection procedure, and its completion will
rgrover1	716:11b41f651697	750	* be communicated to the application with an invocation of the
rgrover1	716:11b41f651697	751	* onDisconnection callback.
rgrover1	716:11b41f651697	752	*
rgrover1	716:11b41f651697	753	* @param reason
rgrover1	716:11b41f651697	754	* The reason for disconnection to be sent back to the peer.
rgrover1	716:11b41f651697	755	*
rgrover1	716:11b41f651697	756	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	757	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	758	* ble.disconnect(reason) should be replaced with
rgrover1	716:11b41f651697	759	* ble.gap().disconnect(reason).
rgrover1	716:11b41f651697	760	*
rgrover1	716:11b41f651697	761	* @note: this version of disconnect() doesn't take a connection handle. It
rgrover1	716:11b41f651697	762	* will work reliably only for stacks which are limited to a single
rgrover1	716:11b41f651697	763	* connection. This API should be considered deprecated in favour of the
rgrover1	716:11b41f651697	764	* alternative which takes a connection handle. It will be dropped in the future.
rgrover1	716:11b41f651697	765	*/
rgrover1	716:11b41f651697	766	ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
rgrover1	716:11b41f651697	767	return gap().disconnect(reason);
rgrover1	716:11b41f651697	768	}
rgrover1	716:11b41f651697	769
rgrover1	716:11b41f651697	770	/**
rgrover1	716:11b41f651697	771	* Returns the current GAP state of the device using a bitmask which
rgrover1	716:11b41f651697	772	* describes whether the device is advertising and/or connected.
rgrover1	716:11b41f651697	773	*
rgrover1	716:11b41f651697	774	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	775	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	776	* ble.getGapState() should be replaced with
rgrover1	716:11b41f651697	777	* ble.gap().getState().
rgrover1	716:11b41f651697	778	*/
rgrover1	716:11b41f651697	779	Gap::GapState_t getGapState(void) const {
rgrover1	716:11b41f651697	780	return gap().getState();
rgrover1	716:11b41f651697	781	}
rgrover1	716:11b41f651697	782
rgrover1	716:11b41f651697	783	/**
rgrover1	716:11b41f651697	784	* Get the GAP peripheral preferred connection parameters. These are the
rgrover1	716:11b41f651697	785	* defaults that the peripheral would like to have in a connection. The
rgrover1	716:11b41f651697	786	* choice of the connection parameters is eventually up to the central.
rgrover1	716:11b41f651697	787	*
rgrover1	716:11b41f651697	788	* @param[out] params
rgrover1	716:11b41f651697	789	* The structure where the parameters will be stored. Memory
rgrover1	716:11b41f651697	790	* for this is owned by the caller.
rgrover1	716:11b41f651697	791	*
rgrover1	716:11b41f651697	792	* @return BLE_ERROR_NONE if the parameters were successfully filled into
rgrover1	716:11b41f651697	793	* the given structure pointed to by params.
rgrover1	716:11b41f651697	794	*
rgrover1	716:11b41f651697	795	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	796	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	797	* ble.getPreferredConnectionParams() should be replaced with
rgrover1	716:11b41f651697	798	* ble.gap().getPreferredConnectionParams().
rgrover1	716:11b41f651697	799	*/
rgrover1	716:11b41f651697	800	ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params) {
rgrover1	716:11b41f651697	801	return gap().getPreferredConnectionParams(params);
rgrover1	716:11b41f651697	802	}
rgrover1	716:11b41f651697	803
rgrover1	716:11b41f651697	804	/**
rgrover1	716:11b41f651697	805	* Set the GAP peripheral preferred connection parameters. These are the
rgrover1	716:11b41f651697	806	* defaults that the peripheral would like to have in a connection. The
rgrover1	716:11b41f651697	807	* choice of the connection parameters is eventually up to the central.
rgrover1	716:11b41f651697	808	*
rgrover1	716:11b41f651697	809	* @param[in] params
rgrover1	716:11b41f651697	810	* The structure containing the desired parameters.
rgrover1	716:11b41f651697	811	*
rgrover1	716:11b41f651697	812	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	813	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	814	* ble.setPreferredConnectionParams() should be replaced with
rgrover1	716:11b41f651697	815	* ble.gap().setPreferredConnectionParams().
rgrover1	716:11b41f651697	816	*/
rgrover1	716:11b41f651697	817	ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params) {
rgrover1	716:11b41f651697	818	return gap().setPreferredConnectionParams(params);
rgrover1	716:11b41f651697	819	}
rgrover1	716:11b41f651697	820
rgrover1	716:11b41f651697	821	/**
rgrover1	716:11b41f651697	822	* Update connection parameters while in the peripheral role.
rgrover1	716:11b41f651697	823	* @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
rgrover1	716:11b41f651697	824	* the central to perform the procedure.
rgrover1	716:11b41f651697	825	* @param[in] handle
rgrover1	716:11b41f651697	826	* Connection Handle
rgrover1	716:11b41f651697	827	* @param[in] params
rgrover1	716:11b41f651697	828	* Pointer to desired connection parameters. If NULL is provided on a peripheral role,
rgrover1	716:11b41f651697	829	* the parameters in the PPCP characteristic of the GAP service will be used instead.
rgrover1	716:11b41f651697	830	*
rgrover1	716:11b41f651697	831	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	832	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	833	* ble.updateConnectionParams() should be replaced with
rgrover1	716:11b41f651697	834	* ble.gap().updateConnectionParams().
rgrover1	716:11b41f651697	835	*/
rgrover1	716:11b41f651697	836	ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
rgrover1	716:11b41f651697	837	return gap().updateConnectionParams(handle, params);
rgrover1	716:11b41f651697	838	}
rgrover1	716:11b41f651697	839
rgrover1	716:11b41f651697	840	/**
rgrover1	716:11b41f651697	841	* Set the device name characteristic in the GAP service.
rgrover1	716:11b41f651697	842	* @param[in] deviceName
rgrover1	716:11b41f651697	843	* The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
rgrover1	716:11b41f651697	844	*
rgrover1	716:11b41f651697	845	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	846	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	847	* ble.setDeviceName() should be replaced with
rgrover1	716:11b41f651697	848	* ble.gap().setDeviceName().
rgrover1	716:11b41f651697	849	*/
rgrover1	716:11b41f651697	850	ble_error_t setDeviceName(const uint8_t *deviceName) {
rgrover1	716:11b41f651697	851	return gap().setDeviceName(deviceName);
rgrover1	716:11b41f651697	852	}
rgrover1	716:11b41f651697	853
rgrover1	716:11b41f651697	854	/**
rgrover1	716:11b41f651697	855	* Get the value of the device name characteristic in the GAP service.
rgrover1	716:11b41f651697	856	* @param[out] deviceName
rgrover1	716:11b41f651697	857	* Pointer to an empty buffer where the UTF-8 *non NULL-
rgrover1	716:11b41f651697	858	* terminated* string will be placed. Set this
rgrover1	716:11b41f651697	859	* value to NULL in order to obtain the deviceName-length
rgrover1	716:11b41f651697	860	* from the 'length' parameter.
rgrover1	716:11b41f651697	861	*
rgrover1	716:11b41f651697	862	* @param[in/out] lengthP
rgrover1	716:11b41f651697	863	* (on input) Length of the buffer pointed to by deviceName;
rgrover1	716:11b41f651697	864	* (on output) the complete device name length (without the
rgrover1	716:11b41f651697	865	* null terminator).
rgrover1	716:11b41f651697	866	*
rgrover1	716:11b41f651697	867	* @note If the device name is longer than the size of the supplied buffer,
rgrover1	716:11b41f651697	868	* length will return the complete device name length, and not the
rgrover1	716:11b41f651697	869	* number of bytes actually returned in deviceName. The application may
rgrover1	716:11b41f651697	870	* use this information to retry with a suitable buffer size.
rgrover1	716:11b41f651697	871	*
rgrover1	716:11b41f651697	872	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	873	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	874	* ble.getDeviceName() should be replaced with
rgrover1	716:11b41f651697	875	* ble.gap().getDeviceName().
rgrover1	716:11b41f651697	876	*/
rgrover1	716:11b41f651697	877	ble_error_t getDeviceName(uint8_t deviceName, unsigned lengthP) {
rgrover1	716:11b41f651697	878	return gap().getDeviceName(deviceName, lengthP);
rgrover1	716:11b41f651697	879	}
rgrover1	716:11b41f651697	880
rgrover1	716:11b41f651697	881	/**
rgrover1	716:11b41f651697	882	* Set the appearance characteristic in the GAP service.
rgrover1	716:11b41f651697	883	* @param[in] appearance
rgrover1	716:11b41f651697	884	* The new value for the device-appearance.
rgrover1	716:11b41f651697	885	*
rgrover1	716:11b41f651697	886	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	887	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	888	* ble.setAppearance() should be replaced with
rgrover1	716:11b41f651697	889	* ble.gap().setAppearance().
rgrover1	716:11b41f651697	890	*/
rgrover1	716:11b41f651697	891	ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
rgrover1	716:11b41f651697	892	return gap().setAppearance(appearance);
rgrover1	716:11b41f651697	893	}
rgrover1	716:11b41f651697	894
rgrover1	716:11b41f651697	895	/**
rgrover1	716:11b41f651697	896	* Get the appearance characteristic in the GAP service.
rgrover1	716:11b41f651697	897	* @param[out] appearance
rgrover1	716:11b41f651697	898	* The new value for the device-appearance.
rgrover1	716:11b41f651697	899	*
rgrover1	716:11b41f651697	900	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	901	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	902	* ble.getAppearance() should be replaced with
rgrover1	716:11b41f651697	903	* ble.gap().getAppearance().
rgrover1	716:11b41f651697	904	*/
rgrover1	716:11b41f651697	905	ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
rgrover1	716:11b41f651697	906	return gap().getAppearance(appearanceP);
rgrover1	716:11b41f651697	907	}
rgrover1	716:11b41f651697	908
rgrover1	716:11b41f651697	909	/**
rgrover1	716:11b41f651697	910	* Set the radio's transmit power.
rgrover1	716:11b41f651697	911	* @param[in] txPower Radio transmit power in dBm.
rgrover1	716:11b41f651697	912	*
rgrover1	716:11b41f651697	913	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	914	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	915	* ble.setTxPower() should be replaced with
rgrover1	716:11b41f651697	916	* ble.gap().setTxPower().
rgrover1	716:11b41f651697	917	*/
rgrover1	716:11b41f651697	918	ble_error_t setTxPower(int8_t txPower) {
rgrover1	716:11b41f651697	919	return gap().setTxPower(txPower);
rgrover1	716:11b41f651697	920	}
rgrover1	716:11b41f651697	921
rgrover1	716:11b41f651697	922	/**
rgrover1	716:11b41f651697	923	* Query the underlying stack for permitted arguments for setTxPower().
rgrover1	716:11b41f651697	924	*
rgrover1	716:11b41f651697	925	* @param[out] valueArrayPP
rgrover1	716:11b41f651697	926	* Out parameter to receive the immutable array of Tx values.
rgrover1	716:11b41f651697	927	* @param[out] countP
rgrover1	716:11b41f651697	928	* Out parameter to receive the array's size.
rgrover1	716:11b41f651697	929	*
rgrover1	716:11b41f651697	930	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	931	* You should use the parallel API from Gap directly. A former call to
rgrover1	716:11b41f651697	932	* ble.getPermittedTxPowerValues() should be replaced with
rgrover1	716:11b41f651697	933	* ble.gap().getPermittedTxPowerValues().
rgrover1	716:11b41f651697	934	*/
rgrover1	716:11b41f651697	935	void getPermittedTxPowerValues(const int8_t *valueArrayPP, size_t countP) {
rgrover1	716:11b41f651697	936	gap().getPermittedTxPowerValues(valueArrayPP, countP);
rgrover1	716:11b41f651697	937	}
rgrover1	716:11b41f651697	938
rgrover1	716:11b41f651697	939	/**
rgrover1	716:11b41f651697	940	* Add a service declaration to the local server ATT table. Also add the
rgrover1	716:11b41f651697	941	* characteristics contained within.
rgrover1	716:11b41f651697	942	*
rgrover1	716:11b41f651697	943	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	944	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	945	* to ble.addService() should be replaced with
rgrover1	716:11b41f651697	946	* ble.gattServer().addService().
rgrover1	716:11b41f651697	947	*/
rgrover1	716:11b41f651697	948	ble_error_t addService(GattService &service) {
rgrover1	716:11b41f651697	949	return gattServer().addService(service);
rgrover1	716:11b41f651697	950	}
rgrover1	716:11b41f651697	951
rgrover1	716:11b41f651697	952	/**
rgrover1	716:11b41f651697	953	* Read the value of a characteristic from the local GattServer
rgrover1	716:11b41f651697	954	* @param[in] attributeHandle
rgrover1	716:11b41f651697	955	* Attribute handle for the value attribute of the characteristic.
rgrover1	716:11b41f651697	956	* @param[out] buffer
rgrover1	716:11b41f651697	957	* A buffer to hold the value being read.
rgrover1	716:11b41f651697	958	* @param[in/out] lengthP
rgrover1	716:11b41f651697	959	* Length of the buffer being supplied. If the attribute
rgrover1	716:11b41f651697	960	* value is longer than the size of the supplied buffer,
rgrover1	716:11b41f651697	961	* this variable will hold upon return the total attribute value length
rgrover1	716:11b41f651697	962	* (excluding offset). The application may use this
rgrover1	716:11b41f651697	963	* information to allocate a suitable buffer size.
rgrover1	716:11b41f651697	964	*
rgrover1	716:11b41f651697	965	* @return BLE_ERROR_NONE if a value was read successfully into the buffer.
rgrover1	716:11b41f651697	966	*
rgrover1	716:11b41f651697	967	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	968	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	969	* to ble.readCharacteristicValue() should be replaced with
rgrover1	716:11b41f651697	970	* ble.gattServer().read().
rgrover1	716:11b41f651697	971	*/
rgrover1	716:11b41f651697	972	ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t buffer, uint16_t lengthP) {
rgrover1	716:11b41f651697	973	return gattServer().read(attributeHandle, buffer, lengthP);
rgrover1	716:11b41f651697	974	}
rgrover1	716:11b41f651697	975
rgrover1	716:11b41f651697	976	/**
rgrover1	716:11b41f651697	977	* Read the value of a characteristic from the local GattServer
rgrover1	716:11b41f651697	978	* @param[in] connectionHandle
rgrover1	716:11b41f651697	979	* Connection Handle.
rgrover1	716:11b41f651697	980	* @param[in] attributeHandle
rgrover1	716:11b41f651697	981	* Attribute handle for the value attribute of the characteristic.
rgrover1	716:11b41f651697	982	* @param[out] buffer
rgrover1	716:11b41f651697	983	* A buffer to hold the value being read.
rgrover1	716:11b41f651697	984	* @param[in/out] lengthP
rgrover1	716:11b41f651697	985	* Length of the buffer being supplied. If the attribute
rgrover1	716:11b41f651697	986	* value is longer than the size of the supplied buffer,
rgrover1	716:11b41f651697	987	* this variable will hold upon return the total attribute value length
rgrover1	716:11b41f651697	988	* (excluding offset). The application may use this
rgrover1	716:11b41f651697	989	* information to allocate a suitable buffer size.
rgrover1	716:11b41f651697	990	*
rgrover1	716:11b41f651697	991	* @return BLE_ERROR_NONE if a value was read successfully into the buffer.
rgrover1	716:11b41f651697	992	*
rgrover1	716:11b41f651697	993	* @note This API is a version of above with an additional connection handle
rgrover1	716:11b41f651697	994	* parameter to allow fetches for connection-specific multivalued
rgrover1	733:718a3566b4ce	995	* attributes (such as the CCCDs).
rgrover1	716:11b41f651697	996	*
rgrover1	716:11b41f651697	997	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	998	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	999	* to ble.readCharacteristicValue() should be replaced with
rgrover1	716:11b41f651697	1000	* ble.gattServer().read().
rgrover1	716:11b41f651697	1001	*/
rgrover1	716:11b41f651697	1002	ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t buffer, uint16_t lengthP) {
rgrover1	716:11b41f651697	1003	return gattServer().read(connectionHandle, attributeHandle, buffer, lengthP);
rgrover1	716:11b41f651697	1004	}
rgrover1	716:11b41f651697	1005
rgrover1	716:11b41f651697	1006	/**
rgrover1	716:11b41f651697	1007	* Update the value of a characteristic on the local GattServer.
rgrover1	716:11b41f651697	1008	*
rgrover1	716:11b41f651697	1009	* @param[in] attributeHandle
rgrover1	716:11b41f651697	1010	* Handle for the value attribute of the Characteristic.
rgrover1	716:11b41f651697	1011	* @param[in] value
rgrover1	716:11b41f651697	1012	* A pointer to a buffer holding the new value
rgrover1	716:11b41f651697	1013	* @param[in] size
rgrover1	716:11b41f651697	1014	* Size of the new value (in bytes).
rgrover1	716:11b41f651697	1015	* @param[in] localOnly
rgrover1	716:11b41f651697	1016	* Should this update be kept on the local
rgrover1	716:11b41f651697	1017	* GattServer regardless of the state of the
rgrover1	716:11b41f651697	1018	* notify/indicate flag in the CCCD for this
rgrover1	716:11b41f651697	1019	* Characteristic? If set to true, no notification
rgrover1	716:11b41f651697	1020	* or indication is generated.
rgrover1	716:11b41f651697	1021	*
rgrover1	716:11b41f651697	1022	* @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
rgrover1	716:11b41f651697	1023	*
rgrover1	716:11b41f651697	1024	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1025	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1026	* to ble.updateCharacteristicValue() should be replaced with
rgrover1	716:11b41f651697	1027	* ble.gattServer().write().
rgrover1	716:11b41f651697	1028	*/
rgrover1	716:11b41f651697	1029	ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle,
rgrover1	716:11b41f651697	1030	const uint8_t *value,
rgrover1	716:11b41f651697	1031	uint16_t size,
rgrover1	716:11b41f651697	1032	bool localOnly = false) {
rgrover1	716:11b41f651697	1033	return gattServer().write(attributeHandle, value, size, localOnly);
rgrover1	716:11b41f651697	1034	}
rgrover1	716:11b41f651697	1035
rgrover1	716:11b41f651697	1036	/**
rgrover1	716:11b41f651697	1037	* Update the value of a characteristic on the local GattServer. A version
rgrover1	716:11b41f651697	1038	* of the same as above with connection handle parameter to allow updates
rgrover1	733:718a3566b4ce	1039	* for connection-specific multivalued attributes (such as the CCCDs).
rgrover1	716:11b41f651697	1040	*
rgrover1	716:11b41f651697	1041	* @param[in] connectionHandle
rgrover1	716:11b41f651697	1042	* Connection Handle.
rgrover1	716:11b41f651697	1043	* @param[in] attributeHandle
rgrover1	716:11b41f651697	1044	* Handle for the value attribute of the Characteristic.
rgrover1	716:11b41f651697	1045	* @param[in] value
rgrover1	716:11b41f651697	1046	* A pointer to a buffer holding the new value
rgrover1	716:11b41f651697	1047	* @param[in] size
rgrover1	716:11b41f651697	1048	* Size of the new value (in bytes).
rgrover1	716:11b41f651697	1049	* @param[in] localOnly
rgrover1	716:11b41f651697	1050	* Should this update be kept on the local
rgrover1	716:11b41f651697	1051	* GattServer regardless of the state of the
rgrover1	716:11b41f651697	1052	* notify/indicate flag in the CCCD for this
rgrover1	716:11b41f651697	1053	* Characteristic? If set to true, no notification
rgrover1	716:11b41f651697	1054	* or indication is generated.
rgrover1	716:11b41f651697	1055	*
rgrover1	716:11b41f651697	1056	* @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
rgrover1	716:11b41f651697	1057	*
rgrover1	716:11b41f651697	1058	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1059	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1060	* to ble.updateCharacteristicValue() should be replaced with
rgrover1	716:11b41f651697	1061	* ble.gattServer().write().
rgrover1	716:11b41f651697	1062	*/
rgrover1	716:11b41f651697	1063	ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle,
rgrover1	716:11b41f651697	1064	GattAttribute::Handle_t attributeHandle,
rgrover1	716:11b41f651697	1065	const uint8_t *value,
rgrover1	716:11b41f651697	1066	uint16_t size,
rgrover1	716:11b41f651697	1067	bool localOnly = false) {
rgrover1	716:11b41f651697	1068	return gattServer().write(connectionHandle, attributeHandle, value, size, localOnly);
rgrover1	716:11b41f651697	1069	}
rgrover1	716:11b41f651697	1070
rgrover1	716:11b41f651697	1071	/**
rgrover1	716:11b41f651697	1072	* Enable the BLE stack's Security Manager. The Security Manager implements
rgrover1	716:11b41f651697	1073	* the actual cryptographic algorithms and protocol exchanges that allow two
rgrover1	716:11b41f651697	1074	* devices to securely exchange data and privately detect each other.
rgrover1	716:11b41f651697	1075	* Calling this API is a prerequisite for encryption and pairing (bonding).
rgrover1	716:11b41f651697	1076	*
rgrover1	716:11b41f651697	1077	* @param[in] enableBonding Allow for bonding.
rgrover1	716:11b41f651697	1078	* @param[in] requireMITM Require protection for man-in-the-middle attacks.
rgrover1	716:11b41f651697	1079	* @param[in] iocaps To specify IO capabilities of this peripheral,
rgrover1	716:11b41f651697	1080	* such as availability of a display or keyboard to
rgrover1	716:11b41f651697	1081	* support out-of-band exchanges of security data.
rgrover1	716:11b41f651697	1082	* @param[in] passkey To specify a static passkey.
rgrover1	716:11b41f651697	1083	*
rgrover1	716:11b41f651697	1084	* @return BLE_ERROR_NONE on success.
rgrover1	716:11b41f651697	1085	*
rgrover1	716:11b41f651697	1086	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1087	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1088	* call to ble.initializeSecurity(...) should be replaced with
rgrover1	716:11b41f651697	1089	* ble.securityManager().init(...).
rgrover1	716:11b41f651697	1090	*/
rgrover1	716:11b41f651697	1091	ble_error_t initializeSecurity(bool enableBonding = true,
rgrover1	716:11b41f651697	1092	bool requireMITM = true,
rgrover1	716:11b41f651697	1093	SecurityManager::SecurityIOCapabilities_t iocaps = SecurityManager::IO_CAPS_NONE,
rgrover1	716:11b41f651697	1094	const SecurityManager::Passkey_t passkey = NULL) {
rgrover1	716:11b41f651697	1095	return securityManager().init(enableBonding, requireMITM, iocaps, passkey);
rgrover1	716:11b41f651697	1096	}
rgrover1	716:11b41f651697	1097
rgrover1	716:11b41f651697	1098	/**
rgrover1	716:11b41f651697	1099	* Get the security status of a connection.
rgrover1	716:11b41f651697	1100	*
rgrover1	716:11b41f651697	1101	* @param[in] connectionHandle Handle to identify the connection.
rgrover1	716:11b41f651697	1102	* @param[out] securityStatusP security status.
rgrover1	716:11b41f651697	1103	*
rgrover1	716:11b41f651697	1104	* @return BLE_SUCCESS Or appropriate error code indicating reason for failure.
rgrover1	716:11b41f651697	1105	*
rgrover1	716:11b41f651697	1106	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1107	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1108	* call to ble.getLinkSecurity(...) should be replaced with
rgrover1	716:11b41f651697	1109	* ble.securityManager().getLinkSecurity(...).
rgrover1	716:11b41f651697	1110	*/
rgrover1	716:11b41f651697	1111	ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, SecurityManager::LinkSecurityStatus_t *securityStatusP) {
rgrover1	716:11b41f651697	1112	return securityManager().getLinkSecurity(connectionHandle, securityStatusP);
rgrover1	716:11b41f651697	1113	}
rgrover1	716:11b41f651697	1114
rgrover1	716:11b41f651697	1115	/**
rgrover1	716:11b41f651697	1116	* Delete all peer device context and all related bonding information from
rgrover1	716:11b41f651697	1117	* the database within the security manager.
rgrover1	716:11b41f651697	1118	*
rgrover1	716:11b41f651697	1119	* @retval BLE_ERROR_NONE On success, else an error code indicating reason for failure.
rgrover1	716:11b41f651697	1120	* @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization and/or
rgrover1	716:11b41f651697	1121	* application registration.
rgrover1	716:11b41f651697	1122	*
rgrover1	716:11b41f651697	1123	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1124	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1125	* call to ble.purgeAllBondingState() should be replaced with
rgrover1	716:11b41f651697	1126	* ble.securityManager().purgeAllBondingState().
rgrover1	716:11b41f651697	1127	*/
rgrover1	716:11b41f651697	1128	ble_error_t purgeAllBondingState(void) {
rgrover1	716:11b41f651697	1129	return securityManager().purgeAllBondingState();
rgrover1	716:11b41f651697	1130	}
rgrover1	716:11b41f651697	1131
rgrover1	716:11b41f651697	1132	/**
rgrover1	716:11b41f651697	1133	* Setup a callback for timeout events. Refer to Gap::TimeoutSource_t for
rgrover1	716:11b41f651697	1134	* possible event types.
rgrover1	716:11b41f651697	1135	*
rgrover1	716:11b41f651697	1136	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	751:868b6dd7a6bf	1137	* You should use the parallel API from Gap directly. A former call
rgrover1	716:11b41f651697	1138	* to ble.onTimeout(callback) should be replaced with
rgrover1	716:11b41f651697	1139	* ble.gap().onTimeout(callback).
rgrover1	716:11b41f651697	1140	*/
rgrover1	716:11b41f651697	1141	void onTimeout(Gap::TimeoutEventCallback_t timeoutCallback) {
rgrover1	716:11b41f651697	1142	gap().onTimeout(timeoutCallback);
rgrover1	716:11b41f651697	1143	}
rgrover1	716:11b41f651697	1144
rgrover1	716:11b41f651697	1145	/**
rgrover1	716:11b41f651697	1146	* Setup a callback for connection events. Refer to Gap::ConnectionEventCallback_t.
rgrover1	716:11b41f651697	1147	*
rgrover1	716:11b41f651697	1148	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	751:868b6dd7a6bf	1149	* You should use the parallel API from Gap directly. A former call
rgrover1	716:11b41f651697	1150	* to ble.onConnection(callback) should be replaced with
rgrover1	716:11b41f651697	1151	* ble.gap().onConnection(callback).
rgrover1	716:11b41f651697	1152	*/
rgrover1	716:11b41f651697	1153	void onConnection(Gap::ConnectionEventCallback_t connectionCallback) {
rgrover1	716:11b41f651697	1154	gap().onConnection(connectionCallback);
rgrover1	716:11b41f651697	1155	}
rgrover1	716:11b41f651697	1156
rgrover1	716:11b41f651697	1157	/**
rgrover1	829:9072de50087b	1158	* Append to a chain of callbacks to be invoked upon GAP disconnection.
rgrover1	716:11b41f651697	1159	*
rgrover1	716:11b41f651697	1160	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	751:868b6dd7a6bf	1161	* You should use the parallel API from Gap directly. A former call
rgrover1	716:11b41f651697	1162	* to ble.onDisconnection(callback) should be replaced with
rgrover1	716:11b41f651697	1163	* ble.gap().onDisconnection(callback).
rgrover1	716:11b41f651697	1164	*/
rgrover1	716:11b41f651697	1165	void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback) {
rgrover1	716:11b41f651697	1166	gap().onDisconnection(disconnectionCallback);
rgrover1	716:11b41f651697	1167	}
rgrover1	716:11b41f651697	1168
rgrover1	716:11b41f651697	1169	template<typename T>
rgrover1	829:9072de50087b	1170	void onDisconnection(T tptr, void (T::mptr)(const Gap::DisconnectionCallbackParams_t*)) {
rgrover1	829:9072de50087b	1171	gap().onDisconnection(tptr, mptr);
rgrover1	716:11b41f651697	1172	}
rgrover1	716:11b41f651697	1173
rgrover1	716:11b41f651697	1174	/**
rgrover1	716:11b41f651697	1175	* Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1	716:11b41f651697	1176	* (nACTIVE) signals from the stack that notify the application when the
rgrover1	716:11b41f651697	1177	* radio is in use. The signal is sent using software interrupt.
rgrover1	716:11b41f651697	1178	*
rgrover1	716:11b41f651697	1179	* The ACTIVE signal is sent before the Radio Event starts. The nACTIVE
rgrover1	716:11b41f651697	1180	* signal is sent at the end of the Radio Event. These signals can be used
rgrover1	716:11b41f651697	1181	* by the application programmer to synchronize application logic with radio
rgrover1	716:11b41f651697	1182	* activity. For example, the ACTIVE signal can be used to shut off external
rgrover1	716:11b41f651697	1183	* devices to manage peak current drawn during periods when the radio is on,
rgrover1	716:11b41f651697	1184	* or to trigger sensor data collection for transmission in the Radio Event.
rgrover1	716:11b41f651697	1185	*
rgrover1	716:11b41f651697	1186	* @param callback
rgrover1	716:11b41f651697	1187	* The application handler to be invoked in response to a radio
rgrover1	716:11b41f651697	1188	* ACTIVE/INACTIVE event.
rgrover1	716:11b41f651697	1189	*
rgrover1	716:11b41f651697	1190	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	751:868b6dd7a6bf	1191	* You should use the parallel API from Gap directly. A former call
rgrover1	716:11b41f651697	1192	* to ble.onRadioNotification(...) should be replaced with
rgrover1	716:11b41f651697	1193	* ble.gap().onRadioNotification(...).
rgrover1	716:11b41f651697	1194	*/
rgrover1	752:424c2ae44553	1195	void onRadioNotification(void (*callback)(bool)) {
rgrover1	716:11b41f651697	1196	gap().onRadioNotification(callback);
rgrover1	716:11b41f651697	1197	}
rgrover1	716:11b41f651697	1198
rgrover1	716:11b41f651697	1199	/**
rgrover1	716:11b41f651697	1200	* Add a callback for the GATT event DATA_SENT (which is triggered when
rgrover1	716:11b41f651697	1201	* updates are sent out by GATT in the form of notifications).
rgrover1	716:11b41f651697	1202	*
rgrover1	716:11b41f651697	1203	* @Note: it is possible to chain together multiple onDataSent callbacks
rgrover1	716:11b41f651697	1204	* (potentially from different modules of an application) to receive updates
rgrover1	716:11b41f651697	1205	* to characteristics.
rgrover1	716:11b41f651697	1206	*
rgrover1	716:11b41f651697	1207	* @Note: it is also possible to setup a callback into a member function of
rgrover1	716:11b41f651697	1208	* some object.
rgrover1	716:11b41f651697	1209	*
rgrover1	716:11b41f651697	1210	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1211	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1212	* to ble.onDataSent(...) should be replaced with
rgrover1	716:11b41f651697	1213	* ble.gattServer().onDataSent(...).
rgrover1	716:11b41f651697	1214	*/
rgrover1	716:11b41f651697	1215	void onDataSent(void (*callback)(unsigned count)) {
rgrover1	716:11b41f651697	1216	gattServer().onDataSent(callback);
rgrover1	716:11b41f651697	1217	}
rgrover1	716:11b41f651697	1218	template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count)) {
rgrover1	716:11b41f651697	1219	gattServer().onDataSent(objPtr, memberPtr);
rgrover1	716:11b41f651697	1220	}
rgrover1	716:11b41f651697	1221
rgrover1	716:11b41f651697	1222	/**
rgrover1	716:11b41f651697	1223	* Setup a callback for when an attribute has its value updated by or at the
rgrover1	716:11b41f651697	1224	* connected peer. For a peripheral, this callback triggered when the local
rgrover1	716:11b41f651697	1225	* GATT server has an attribute updated by a write command from the peer.
rgrover1	716:11b41f651697	1226	* For a Central, this callback is triggered when a response is received for
rgrover1	716:11b41f651697	1227	* a write request.
rgrover1	716:11b41f651697	1228	*
rgrover1	716:11b41f651697	1229	* @Note: it is possible to chain together multiple onDataWritten callbacks
rgrover1	716:11b41f651697	1230	* (potentially from different modules of an application) to receive updates
rgrover1	716:11b41f651697	1231	* to characteristics. Many services, such as DFU and UART add their own
rgrover1	716:11b41f651697	1232	* onDataWritten callbacks behind the scenes to trap interesting events.
rgrover1	716:11b41f651697	1233	*
rgrover1	716:11b41f651697	1234	* @Note: it is also possible to setup a callback into a member function of
rgrover1	716:11b41f651697	1235	* some object.
rgrover1	716:11b41f651697	1236	*
rgrover1	716:11b41f651697	1237	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1238	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1239	* to ble.onDataWritten(...) should be replaced with
rgrover1	716:11b41f651697	1240	* ble.gattServer().onDataWritten(...).
rgrover1	716:11b41f651697	1241	*/
rgrover1	716:11b41f651697	1242	void onDataWritten(void (callback)(const GattWriteCallbackParams eventDataP)) {
rgrover1	716:11b41f651697	1243	gattServer().onDataWritten(callback);
rgrover1	716:11b41f651697	1244	}
rgrover1	716:11b41f651697	1245	template <typename T> void onDataWritten(T * objPtr, void (T::memberPtr)(const GattWriteCallbackParams context)) {
rgrover1	716:11b41f651697	1246	gattServer().onDataWritten(objPtr, memberPtr);
rgrover1	716:11b41f651697	1247	}
rgrover1	716:11b41f651697	1248
rgrover1	716:11b41f651697	1249	/**
rgrover1	716:11b41f651697	1250	* Setup a callback to be invoked on the peripheral when an attribute is
rgrover1	716:11b41f651697	1251	* being read by a remote client.
rgrover1	716:11b41f651697	1252	*
rgrover1	716:11b41f651697	1253	* @Note: this functionality may not be available on all underlying stacks.
rgrover1	716:11b41f651697	1254	* You could use GattCharacteristic::setReadAuthorizationCallback() as an
rgrover1	716:11b41f651697	1255	* alternative.
rgrover1	716:11b41f651697	1256	*
rgrover1	716:11b41f651697	1257	* @Note: it is possible to chain together multiple onDataRead callbacks
rgrover1	716:11b41f651697	1258	* (potentially from different modules of an application) to receive updates
rgrover1	716:11b41f651697	1259	* to characteristics. Services may add their own onDataRead callbacks
rgrover1	716:11b41f651697	1260	* behind the scenes to trap interesting events.
rgrover1	716:11b41f651697	1261	*
rgrover1	716:11b41f651697	1262	* @Note: it is also possible to setup a callback into a member function of
rgrover1	716:11b41f651697	1263	* some object.
rgrover1	716:11b41f651697	1264	*
rgrover1	716:11b41f651697	1265	* @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
rgrover1	716:11b41f651697	1266	* else BLE_ERROR_NONE.
rgrover1	716:11b41f651697	1267	*
rgrover1	716:11b41f651697	1268	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1269	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1270	* to ble.onDataRead(...) should be replaced with
rgrover1	716:11b41f651697	1271	* ble.gattServer().onDataRead(...).
rgrover1	716:11b41f651697	1272	*/
rgrover1	716:11b41f651697	1273	ble_error_t onDataRead(void (callback)(const GattReadCallbackParams eventDataP)) {
rgrover1	716:11b41f651697	1274	return gattServer().onDataRead(callback);
rgrover1	716:11b41f651697	1275	}
rgrover1	716:11b41f651697	1276	template <typename T> ble_error_t onDataRead(T * objPtr, void (T::memberPtr)(const GattReadCallbackParams context)) {
rgrover1	716:11b41f651697	1277	return gattServer().onDataRead(objPtr, memberPtr);
rgrover1	716:11b41f651697	1278	}
rgrover1	716:11b41f651697	1279
rgrover1	716:11b41f651697	1280	/**
rgrover1	716:11b41f651697	1281	* Setup a callback for when notifications/indications are enabled for a
rgrover1	716:11b41f651697	1282	* characteristic on the local GattServer.
rgrover1	716:11b41f651697	1283	*
rgrover1	716:11b41f651697	1284	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1285	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1286	* to ble.onUpdatesEnabled(callback) should be replaced with
rgrover1	716:11b41f651697	1287	* ble.gattServer().onUpdatesEnabled(callback).
rgrover1	716:11b41f651697	1288	*/
rgrover1	716:11b41f651697	1289	void onUpdatesEnabled(GattServer::EventCallback_t callback) {
rgrover1	716:11b41f651697	1290	gattServer().onUpdatesEnabled(callback);
rgrover1	716:11b41f651697	1291	}
rgrover1	716:11b41f651697	1292
rgrover1	716:11b41f651697	1293	/**
rgrover1	716:11b41f651697	1294	* Setup a callback for when notifications/indications are disabled for a
rgrover1	716:11b41f651697	1295	* characteristic on the local GattServer.
rgrover1	716:11b41f651697	1296	*
rgrover1	716:11b41f651697	1297	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1298	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1299	* to ble.onUpdatesEnabled(callback) should be replaced with
rgrover1	716:11b41f651697	1300	* ble.gattServer().onUpdatesEnabled(callback).
rgrover1	716:11b41f651697	1301	*/
rgrover1	716:11b41f651697	1302	void onUpdatesDisabled(GattServer::EventCallback_t callback) {
rgrover1	716:11b41f651697	1303	gattServer().onUpdatesDisabled(callback);
rgrover1	716:11b41f651697	1304	}
rgrover1	716:11b41f651697	1305
rgrover1	716:11b41f651697	1306	/**
rgrover1	716:11b41f651697	1307	* Setup a callback for when the GATT server receives a response for an
rgrover1	716:11b41f651697	1308	* indication event sent previously.
rgrover1	716:11b41f651697	1309	*
rgrover1	716:11b41f651697	1310	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1311	* You should use the parallel API from GattServer directly. A former call
rgrover1	716:11b41f651697	1312	* to ble.onConfirmationReceived(callback) should be replaced with
rgrover1	716:11b41f651697	1313	* ble.gattServer().onConfirmationReceived(callback).
rgrover1	716:11b41f651697	1314	*/
rgrover1	716:11b41f651697	1315	void onConfirmationReceived(GattServer::EventCallback_t callback) {
rgrover1	716:11b41f651697	1316	gattServer().onConfirmationReceived(callback);
rgrover1	716:11b41f651697	1317	}
rgrover1	716:11b41f651697	1318
rgrover1	716:11b41f651697	1319	/**
rgrover1	716:11b41f651697	1320	* Setup a callback for when the security setup procedure (key generation
rgrover1	716:11b41f651697	1321	* and exchange) for a link has started. This will be skipped for bonded
rgrover1	716:11b41f651697	1322	* devices. The callback is passed in parameters received from the peer's
rgrover1	716:11b41f651697	1323	* security request: bool allowBonding, bool requireMITM, and
rgrover1	716:11b41f651697	1324	* SecurityIOCapabilities_t.
rgrover1	716:11b41f651697	1325	*
rgrover1	716:11b41f651697	1326	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1327	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1328	* call to ble.onSecuritySetupInitiated(callback) should be replaced with
rgrover1	716:11b41f651697	1329	* ble.securityManager().onSecuritySetupInitiated(callback).
rgrover1	716:11b41f651697	1330	*/
rgrover1	716:11b41f651697	1331	void onSecuritySetupInitiated(SecurityManager::SecuritySetupInitiatedCallback_t callback) {
rgrover1	716:11b41f651697	1332	securityManager().onSecuritySetupInitiated(callback);
rgrover1	716:11b41f651697	1333	}
rgrover1	716:11b41f651697	1334
rgrover1	716:11b41f651697	1335	/**
rgrover1	716:11b41f651697	1336	* Setup a callback for when the security setup procedure (key generation
rgrover1	716:11b41f651697	1337	* and exchange) for a link has completed. This will be skipped for bonded
rgrover1	716:11b41f651697	1338	* devices. The callback is passed in the success/failure status of the
rgrover1	716:11b41f651697	1339	* security setup procedure.
rgrover1	716:11b41f651697	1340	*
rgrover1	716:11b41f651697	1341	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1342	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1343	* call to ble.onSecuritySetupCompleted(callback) should be replaced with
rgrover1	716:11b41f651697	1344	* ble.securityManager().onSecuritySetupCompleted(callback).
rgrover1	716:11b41f651697	1345	*/
rgrover1	716:11b41f651697	1346	void onSecuritySetupCompleted(SecurityManager::SecuritySetupCompletedCallback_t callback) {
rgrover1	716:11b41f651697	1347	securityManager().onSecuritySetupCompleted(callback);
rgrover1	716:11b41f651697	1348	}
rgrover1	716:11b41f651697	1349
rgrover1	716:11b41f651697	1350	/**
rgrover1	716:11b41f651697	1351	* Setup a callback for when a link with the peer is secured. For bonded
rgrover1	716:11b41f651697	1352	* devices, subsequent reconnections with bonded peer will result only in
rgrover1	716:11b41f651697	1353	* this callback when the link is secured and setup procedures will not
rgrover1	716:11b41f651697	1354	* occur unless the bonding information is either lost or deleted on either
rgrover1	716:11b41f651697	1355	* or both sides. The callback is passed in a SecurityManager::SecurityMode_t according
rgrover1	716:11b41f651697	1356	* to the level of security in effect for the secured link.
rgrover1	716:11b41f651697	1357	*
rgrover1	716:11b41f651697	1358	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1359	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1360	* call to ble.onLinkSecured(callback) should be replaced with
rgrover1	716:11b41f651697	1361	* ble.securityManager().onLinkSecured(callback).
rgrover1	716:11b41f651697	1362	*/
rgrover1	716:11b41f651697	1363	void onLinkSecured(SecurityManager::LinkSecuredCallback_t callback) {
rgrover1	716:11b41f651697	1364	securityManager().onLinkSecured(callback);
rgrover1	716:11b41f651697	1365	}
rgrover1	716:11b41f651697	1366
rgrover1	716:11b41f651697	1367	/**
rgrover1	716:11b41f651697	1368	* Setup a callback for successful bonding; i.e. that link-specific security
rgrover1	716:11b41f651697	1369	* context is stored persistently for a peer device.
rgrover1	716:11b41f651697	1370	*
rgrover1	716:11b41f651697	1371	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1372	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1373	* call to ble.onSecurityContextStored(callback) should be replaced with
rgrover1	716:11b41f651697	1374	* ble.securityManager().onSecurityContextStored(callback).
rgrover1	716:11b41f651697	1375	*/
rgrover1	716:11b41f651697	1376	void onSecurityContextStored(SecurityManager::HandleSpecificEvent_t callback) {
rgrover1	716:11b41f651697	1377	securityManager().onSecurityContextStored(callback);
rgrover1	716:11b41f651697	1378	}
rgrover1	716:11b41f651697	1379
rgrover1	716:11b41f651697	1380	/**
rgrover1	716:11b41f651697	1381	* Setup a callback for when the passkey needs to be displayed on a
rgrover1	716:11b41f651697	1382	* peripheral with DISPLAY capability. This happens when security is
rgrover1	716:11b41f651697	1383	* configured to prevent Man-In-The-Middle attacks, and a PIN (or passkey)
rgrover1	716:11b41f651697	1384	* needs to be exchanged between the peers to authenticate the connection
rgrover1	716:11b41f651697	1385	* attempt.
rgrover1	716:11b41f651697	1386	*
rgrover1	716:11b41f651697	1387	* @note: This API is now deprecated and will be dropped in the future.
rgrover1	716:11b41f651697	1388	* You should use the parallel API from SecurityManager directly. A former
rgrover1	716:11b41f651697	1389	* call to ble.onPasskeyDisplay(callback) should be replaced with
rgrover1	716:11b41f651697	1390	* ble.securityManager().onPasskeyDisplay(callback).
rgrover1	716:11b41f651697	1391	*/
rgrover1	716:11b41f651697	1392	void onPasskeyDisplay(SecurityManager::PasskeyDisplayCallback_t callback) {
rgrover1	716:11b41f651697	1393	return securityManager().onPasskeyDisplay(callback);
rgrover1	716:11b41f651697	1394	}
rgrover1	716:11b41f651697	1395
rgrover1	716:11b41f651697	1396	private:
rgrover1	806:50c121156a71	1397	BLE(const BLE&);
rgrover1	806:50c121156a71	1398	BLE &operator=(const BLE &);
rgrover1	806:50c121156a71	1399
rgrover1	806:50c121156a71	1400	private:
rgrover1	822:a0f080d1e836	1401	BLEInstanceBase transport; / the device specific backend */
rgrover1	716:11b41f651697	1402	};
rgrover1	716:11b41f651697	1403
rgrover1	716:11b41f651697	1404	typedef BLE BLEDevice; /* DEPRECATED. This type alias is retained for the sake of compatibility with older
rgrover1	716:11b41f651697	1405	* code. Will be dropped at some point soon.*/
rgrover1	716:11b41f651697	1406
rgrover1	716:11b41f651697	1407	#endif // ifndef __BLE_H__

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	12 Feb 2018
Imports:	2
Forks:	0
Commits:	1210
Dependents:	1
Dependencies:	0
Followers:	1

ble/BLE.h@843:7d22b29f91bf, 2015-11-02 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning