CARLO TARALLO / BLE_API

prova invio BLE

Dependents:   BLE_HeartRate_IDB04A1

Fork of BLE_API by Bluetooth Low Energy

ble/BLE.h@850:32ff6e392630, 2015-11-02 (annotated)

Committer:
rgrover1
Date:
Mon Nov 02 09:09:05 2015 +0000
Revision:
850:32ff6e392630
Parent:
843:7d22b29f91bf
Child:
851:802f445cc195
Synchronized with git rev 8aaa385e

Author: Johnny Robeson

use the github url public url in module.json

Who changed what in which revision?

UserRevisionLine numberNew contents of line
rgrover1 716:11b41f651697 1 /* mbed Microcontroller Library
rgrover1 716:11b41f651697 2 * Copyright (c) 2006-2013 ARM Limited
rgrover1 716:11b41f651697 3 *
rgrover1 716:11b41f651697 4 * Licensed under the Apache License, Version 2.0 (the "License");
rgrover1 716:11b41f651697 5 * you may not use this file except in compliance with the License.
rgrover1 716:11b41f651697 6 * You may obtain a copy of the License at
rgrover1 716:11b41f651697 7 *
rgrover1 716:11b41f651697 8 * http://www.apache.org/licenses/LICENSE-2.0
rgrover1 716:11b41f651697 9 *
rgrover1 716:11b41f651697 10 * Unless required by applicable law or agreed to in writing, software
rgrover1 716:11b41f651697 11 * distributed under the License is distributed on an "AS IS" BASIS,
rgrover1 716:11b41f651697 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1 716:11b41f651697 13 * See the License for the specific language governing permissions and
rgrover1 716:11b41f651697 14 * limitations under the License.
rgrover1 716:11b41f651697 15 */
rgrover1 716:11b41f651697 16
rgrover1 716:11b41f651697 17 #ifndef __BLE_H__
rgrover1 716:11b41f651697 18 #define __BLE_H__
rgrover1 716:11b41f651697 19
rgrover1 716:11b41f651697 20 #include "blecommon.h"
rgrover1 716:11b41f651697 21 #include "Gap.h"
rgrover1 716:11b41f651697 22 #include "GattServer.h"
rgrover1 716:11b41f651697 23 #include "GattClient.h"
rgrover1 716:11b41f651697 24 #include "BLEInstanceBase.h"
rgrover1 716:11b41f651697 25
rgrover1 818:61c62a287194 26 #include "mbed_error.h"
rgrover1 818:61c62a287194 27
rgrover1 716:11b41f651697 28 /**
rgrover1 716:11b41f651697 29 * The base class used to abstract away BLE capable radio transceivers or SOCs,
rgrover1 716:11b41f651697 30 * to enable this BLE API to work with any radio transparently.
rgrover1 716:11b41f651697 31 */
rgrover1 716:11b41f651697 32 class BLE
rgrover1 716:11b41f651697 33 {
rgrover1 716:11b41f651697 34 public:
rgrover1 716:11b41f651697 35 /**
rgrover1 716:11b41f651697 36 * Initialize the BLE controller. This should be called before using
rgrover1 716:11b41f651697 37 * anything else in the BLE_API.
rgrover1 716:11b41f651697 38 *
rgrover1 716:11b41f651697 39 * init() hands control to the underlying BLE module to accomplish
rgrover1 716:11b41f651697 40 * initialization. This initialization may tacitly depend on other hardware
rgrover1 716:11b41f651697 41 * setup (such as clocks or power-modes) which happens early on during
rgrover1 716:11b41f651697 42 * system startup. It may not be safe to call init() from global static
rgrover1 716:11b41f651697 43 * context where ordering is compiler specific and can't be guaranteed--it
rgrover1 716:11b41f651697 44 * is safe to call BLE::init() from within main().
rgrover1 716:11b41f651697 45 */
rgrover1 716:11b41f651697 46 ble_error_t init();
rgrover1 716:11b41f651697 47
rgrover1 716:11b41f651697 48 /**
rgrover1 716:11b41f651697 49 * Purge the BLE stack of GATT and GAP state. init() must be called
rgrover1 716:11b41f651697 50 * afterwards to re-instate services and GAP state. This API offers a way to
rgrover1 716:11b41f651697 51 * repopulate the GATT database with new services and characteristics.
rgrover1 716:11b41f651697 52 */
rgrover1 716:11b41f651697 53 ble_error_t shutdown(void) {
rgrover1 716:11b41f651697 54 clearAdvertisingPayload();
rgrover1 818:61c62a287194 55 if (!transport) {
rgrover1 818:61c62a287194 56 error("bad handle to underlying transport");
rgrover1 818:61c62a287194 57 }
rgrover1 716:11b41f651697 58 return transport->shutdown();
rgrover1 716:11b41f651697 59 }
rgrover1 716:11b41f651697 60
rgrover1 716:11b41f651697 61 /**
rgrover1 716:11b41f651697 62 * This call allows the application to get the BLE stack version information.
rgrover1 716:11b41f651697 63 *
rgrover1 716:11b41f651697 64 * @return A pointer to a const string representing the version.
rgrover1 716:11b41f651697 65 * Note: The string is owned by the BLE_API.
rgrover1 716:11b41f651697 66 */
rgrover1 716:11b41f651697 67 const char *getVersion(void) {
rgrover1 818:61c62a287194 68 if (!transport) {
rgrover1 818:61c62a287194 69 error("bad handle to underlying transport");
rgrover1 818:61c62a287194 70 }
rgrover1 716:11b41f651697 71 return transport->getVersion();
rgrover1 716:11b41f651697 72 }
rgrover1 716:11b41f651697 73
rgrover1 716:11b41f651697 74 /*
rgrover1 716:11b41f651697 75 * Accessors to GAP. Please refer to Gap.h. All GAP related functionality requires
rgrover1 716:11b41f651697 76 * going through this accessor.
rgrover1 716:11b41f651697 77 */
rgrover1 716:11b41f651697 78 const Gap &gap() const {
rgrover1 818:61c62a287194 79 if (!transport) {
rgrover1 818:61c62a287194 80 error("bad handle to underlying transport");
rgrover1 818:61c62a287194 81 }
rgrover1 716:11b41f651697 82 return transport->getGap();
rgrover1 716:11b41f651697 83 }
rgrover1 716:11b41f651697 84 Gap &gap() {
rgrover1 818:61c62a287194 85 if (!transport) {
rgrover1 818:61c62a287194 86 error("bad handle to underlying transport");
rgrover1 818:61c62a287194 87 }
rgrover1 716:11b41f651697 88 return transport->getGap();
rgrover1 716:11b41f651697 89 }
rgrover1 716:11b41f651697 90
rgrover1 716:11b41f651697 91 /*
rgrover1 716:11b41f651697 92 * Accessors to GATT Server. Please refer to GattServer.h. All GATTServer related
rgrover1 716:11b41f651697 93 * functionality requires going through this accessor.
rgrover1 716:11b41f651697 94 */
rgrover1 716:11b41f651697 95 const GattServer& gattServer() const {
rgrover1 818:61c62a287194 96 if (!transport) {
rgrover1 818:61c62a287194 97 error("bad handle to underlying transport");
rgrover1 818:61c62a287194 98 }
rgrover1 716:11b41f651697 99 return transport->getGattServer();
rgrover1 716:11b41f651697 100 }
rgrover1 716:11b41f651697 101 GattServer& gattServer() {
rgrover1 818:61c62a287194 102 if (!transport) {
rgrover1 818:61c62a287194 103 error("bad handle to underlying transport");
rgrover1 818:61c62a287194 104 }
rgrover1 716:11b41f651697 105 return transport->getGattServer();
rgrover1 716:11b41f651697 106 }
rgrover1 716:11b41f651697 107
rgrover1 716:11b41f651697 108 /*
rgrover1 716:11b41f651697 109 * Accessors to GATT Client. Please refer to GattClient.h. All GATTClient related
rgrover1 716:11b41f651697 110 * functionality requires going through this accessor.
rgrover1 716:11b41f651697 111 */
rgrover1 716:11b41f651697 112 const GattClient& gattClient() const {
rgrover1 818:61c62a287194 113 if (!transport) {
rgrover1 818:61c62a287194 114 error("bad handle to underlying transport");
rgrover1 818:61c62a287194 115 }
rgrover1 716:11b41f651697 116 return transport->getGattClient();
rgrover1 716:11b41f651697 117 }
rgrover1 716:11b41f651697 118 GattClient& gattClient() {
rgrover1 818:61c62a287194 119 if (!transport) {
rgrover1 818:61c62a287194 120 error("bad handle to underlying transport");
rgrover1 818:61c62a287194 121 }
rgrover1 716:11b41f651697 122 return transport->getGattClient();
rgrover1 716:11b41f651697 123 }
rgrover1 716:11b41f651697 124
rgrover1 716:11b41f651697 125 /*
rgrover1 716:11b41f651697 126 * Accessors to Security Manager. Please refer to SecurityManager.h. All
rgrover1 716:11b41f651697 127 * SecurityManager related functionality requires going through this
rgrover1 716:11b41f651697 128 * accessor.
rgrover1 716:11b41f651697 129 */
rgrover1 716:11b41f651697 130 const SecurityManager& securityManager() const {
rgrover1 818:61c62a287194 131 if (!transport) {
rgrover1 818:61c62a287194 132 error("bad handle to underlying transport");
rgrover1 818:61c62a287194 133 }
rgrover1 716:11b41f651697 134 return transport->getSecurityManager();
rgrover1 716:11b41f651697 135 }
rgrover1 716:11b41f651697 136 SecurityManager& securityManager() {
rgrover1 818:61c62a287194 137 if (!transport) {
rgrover1 818:61c62a287194 138 error("bad handle to underlying transport");
rgrover1 818:61c62a287194 139 }
rgrover1 716:11b41f651697 140 return transport->getSecurityManager();
rgrover1 716:11b41f651697 141 }
rgrover1 716:11b41f651697 142
rgrover1 716:11b41f651697 143 /**
rgrover1 716:11b41f651697 144 * Yield control to the BLE stack or to other tasks waiting for events. This
rgrover1 716:11b41f651697 145 * is a sleep function which will return when there is an application
rgrover1 716:11b41f651697 146 * specific interrupt, but the MCU might wake up several times before
rgrover1 716:11b41f651697 147 * returning (to service the stack). This is not always interchangeable with
rgrover1 716:11b41f651697 148 * WFE().
rgrover1 716:11b41f651697 149 */
rgrover1 716:11b41f651697 150 void waitForEvent(void) {
rgrover1 818:61c62a287194 151 if (!transport) {
rgrover1 818:61c62a287194 152 error("bad handle to underlying transport");
rgrover1 818:61c62a287194 153 }
rgrover1 716:11b41f651697 154 transport->waitForEvent();
rgrover1 716:11b41f651697 155 }
rgrover1 716:11b41f651697 156
rgrover1 822:a0f080d1e836 157 public:
rgrover1 822:a0f080d1e836 158 typedef unsigned InstanceID_t;
rgrover1 822:a0f080d1e836 159 static const InstanceID_t DEFAULT_INSTANCE = 0;
rgrover1 822:a0f080d1e836 160 #ifndef YOTTA_CFG_BLE_INSTANCES_COUNT
rgrover1 822:a0f080d1e836 161 static const InstanceID_t NUM_INSTANCES = 1;
rgrover1 822:a0f080d1e836 162 #else
rgrover1 822:a0f080d1e836 163 static const InstanceID_t NUM_INSTANCES = YOTTA_CFG_BLE_INSTANCES_COUNT;
rgrover1 822:a0f080d1e836 164 #endif
rgrover1 822:a0f080d1e836 165
rgrover1 822:a0f080d1e836 166 /**
rgrover1 822:a0f080d1e836 167 * Get a reference to the BLE singleton corresponding to a given interface.
rgrover1 822:a0f080d1e836 168 * There is a static array of BLE singletons.
rgrover1 822:a0f080d1e836 169 *
rgrover1 822:a0f080d1e836 170 * @Note: Calling Instance() is preferred over constructing a BLE object
rgrover1 822:a0f080d1e836 171 * directly, as it returns references to singletons.
rgrover1 822:a0f080d1e836 172 *
rgrover1 822:a0f080d1e836 173 * @param[in] id
rgrover1 822:a0f080d1e836 174 * Instance-ID. This should be less than NUM_INSTANCES in order
rgrover1 822:a0f080d1e836 175 * for the returned BLE singleton to be useful.
rgrover1 822:a0f080d1e836 176 *
rgrover1 822:a0f080d1e836 177 * @return a reference to a single object
rgrover1 822:a0f080d1e836 178 */
rgrover1 822:a0f080d1e836 179 static BLE &Instance(InstanceID_t id = DEFAULT_INSTANCE);
rgrover1 822:a0f080d1e836 180
rgrover1 822:a0f080d1e836 181 /**
rgrover1 822:a0f080d1e836 182 * Constructor for a handle to a BLE instance (i.e. BLE stack). BLE handles
rgrover1 822:a0f080d1e836 183 * are thin wrappers around a transport object (i.e. ptr. to
rgrover1 822:a0f080d1e836 184 * BLEInstanceBase).
rgrover1 822:a0f080d1e836 185 *
rgrover1 822:a0f080d1e836 186 * BLE objects are are better created as singletons accessed through the
rgrover1 822:a0f080d1e836 187 * Instance() method. If multiple BLE handles are constructed for the same
rgrover1 822:a0f080d1e836 188 * interface (using this constructor), they will share the same underlying
rgrover1 822:a0f080d1e836 189 * transport object.
rgrover1 822:a0f080d1e836 190 */
rgrover1 822:a0f080d1e836 191 BLE(InstanceID_t instanceID = DEFAULT_INSTANCE);
rgrover1 822:a0f080d1e836 192
rgrover1 822:a0f080d1e836 193
rgrover1 716:11b41f651697 194 /*
rgrover1 716:11b41f651697 195 * Deprecation alert!
rgrover1 716:11b41f651697 196 * All of the following are deprecated and may be dropped in a future
rgrover1 716:11b41f651697 197 * release. Documentation should refer to alternative APIs.
rgrover1 716:11b41f651697 198 */
rgrover1 716:11b41f651697 199
rgrover1 716:11b41f651697 200 /* GAP specific APIs. */
rgrover1 716:11b41f651697 201 public:
rgrover1 716:11b41f651697 202 /**
rgrover1 716:11b41f651697 203 * Set the BTLE MAC address and type.
rgrover1 716:11b41f651697 204 * @return BLE_ERROR_NONE on success.
rgrover1 716:11b41f651697 205 *
rgrover1 716:11b41f651697 206 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 207 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 208 * ble.setAddress(...) should be replaced with
rgrover1 716:11b41f651697 209 * ble.gap().setAddress(...).
rgrover1 716:11b41f651697 210 */
rgrover1 716:11b41f651697 211 ble_error_t setAddress(Gap::AddressType_t type, const Gap::Address_t address) {
rgrover1 716:11b41f651697 212 return gap().setAddress(type, address);
rgrover1 716:11b41f651697 213 }
rgrover1 716:11b41f651697 214
rgrover1 716:11b41f651697 215 /**
rgrover1 716:11b41f651697 216 * Fetch the BTLE MAC address and type.
rgrover1 716:11b41f651697 217 * @return BLE_ERROR_NONE on success.
rgrover1 716:11b41f651697 218 *
rgrover1 716:11b41f651697 219 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 220 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 221 * ble.getAddress(...) should be replaced with
rgrover1 716:11b41f651697 222 * ble.gap().getAddress(...).
rgrover1 716:11b41f651697 223 */
rgrover1 716:11b41f651697 224 ble_error_t getAddress(Gap::AddressType_t *typeP, Gap::Address_t address) {
rgrover1 716:11b41f651697 225 return gap().getAddress(typeP, address);
rgrover1 716:11b41f651697 226 }
rgrover1 716:11b41f651697 227
rgrover1 716:11b41f651697 228 /**
rgrover1 716:11b41f651697 229 * Set the GAP advertising mode to use for this device.
rgrover1 716:11b41f651697 230 *
rgrover1 716:11b41f651697 231 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 232 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 233 * ble.setAdvertisingType(...) should be replaced with
rgrover1 716:11b41f651697 234 * ble.gap().setAdvertisingType(...).
rgrover1 716:11b41f651697 235 */
rgrover1 716:11b41f651697 236 void setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) {
rgrover1 716:11b41f651697 237 gap().setAdvertisingType(advType);
rgrover1 716:11b41f651697 238 }
rgrover1 716:11b41f651697 239
rgrover1 716:11b41f651697 240 /**
rgrover1 716:11b41f651697 241 * @param[in] interval
rgrover1 716:11b41f651697 242 * Advertising interval in units of milliseconds. Advertising
rgrover1 716:11b41f651697 243 * is disabled if interval is 0. If interval is smaller than
rgrover1 716:11b41f651697 244 * the minimum supported value, then the minimum supported
rgrover1 716:11b41f651697 245 * value is used instead. This minimum value can be discovered
rgrover1 716:11b41f651697 246 * using getMinAdvertisingInterval().
rgrover1 716:11b41f651697 247 *
rgrover1 716:11b41f651697 248 * This field must be set to 0 if connectionMode is equal
rgrover1 716:11b41f651697 249 * to ADV_CONNECTABLE_DIRECTED.
rgrover1 716:11b41f651697 250 *
rgrover1 716:11b41f651697 251 * @note: Decreasing this value will allow central devices to detect a
rgrover1 716:11b41f651697 252 * peripheral faster at the expense of more power being used by the radio
rgrover1 716:11b41f651697 253 * due to the higher data transmit rate.
rgrover1 716:11b41f651697 254 *
rgrover1 716:11b41f651697 255 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 256 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 257 * ble.setAdvertisingInterval(...) should be replaced with
rgrover1 716:11b41f651697 258 * ble.gap().setAdvertisingInterval(...).
rgrover1 716:11b41f651697 259 *
rgrover1 716:11b41f651697 260 * @note: [WARNING] This API previously used 0.625ms as the unit for its
rgrover1 716:11b41f651697 261 * 'interval' argument. That required an explicit conversion from
rgrover1 716:11b41f651697 262 * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
rgrover1 716:11b41f651697 263 * no longer required as the new units are milliseconds. Any application
rgrover1 716:11b41f651697 264 * code depending on the old semantics would need to be updated accordingly.
rgrover1 716:11b41f651697 265 */
rgrover1 716:11b41f651697 266 void setAdvertisingInterval(uint16_t interval) {
rgrover1 716:11b41f651697 267 gap().setAdvertisingInterval(interval);
rgrover1 716:11b41f651697 268 }
rgrover1 716:11b41f651697 269
rgrover1 716:11b41f651697 270 /**
rgrover1 716:11b41f651697 271 * @return Minimum Advertising interval in milliseconds.
rgrover1 716:11b41f651697 272 *
rgrover1 716:11b41f651697 273 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 274 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 275 * ble.getMinAdvertisingInterval(...) should be replaced with
rgrover1 716:11b41f651697 276 * ble.gap().getMinAdvertisingInterval(...).
rgrover1 716:11b41f651697 277 */
rgrover1 716:11b41f651697 278 uint16_t getMinAdvertisingInterval(void) const {
rgrover1 716:11b41f651697 279 return gap().getMinAdvertisingInterval();
rgrover1 716:11b41f651697 280 }
rgrover1 716:11b41f651697 281
rgrover1 716:11b41f651697 282 /**
rgrover1 716:11b41f651697 283 * @return Minimum Advertising interval in milliseconds for non-connectible mode.
rgrover1 716:11b41f651697 284 *
rgrover1 716:11b41f651697 285 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 286 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 287 * ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
rgrover1 716:11b41f651697 288 * ble.gap().getMinNonConnectableAdvertisingInterval(...).
rgrover1 716:11b41f651697 289 */
rgrover1 716:11b41f651697 290 uint16_t getMinNonConnectableAdvertisingInterval(void) const {
rgrover1 716:11b41f651697 291 return gap().getMinNonConnectableAdvertisingInterval();
rgrover1 716:11b41f651697 292 }
rgrover1 716:11b41f651697 293
rgrover1 716:11b41f651697 294 /**
rgrover1 716:11b41f651697 295 * @return Maximum Advertising interval in milliseconds.
rgrover1 716:11b41f651697 296 *
rgrover1 716:11b41f651697 297 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 298 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 299 * ble.getMaxAdvertisingInterval(...) should be replaced with
rgrover1 716:11b41f651697 300 * ble.gap().getMaxAdvertisingInterval(...).
rgrover1 716:11b41f651697 301 */
rgrover1 716:11b41f651697 302 uint16_t getMaxAdvertisingInterval(void) const {
rgrover1 716:11b41f651697 303 return gap().getMaxAdvertisingInterval();
rgrover1 716:11b41f651697 304 }
rgrover1 716:11b41f651697 305
rgrover1 716:11b41f651697 306 /**
rgrover1 716:11b41f651697 307 * @param[in] timeout
rgrover1 716:11b41f651697 308 * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
rgrover1 716:11b41f651697 309 * and 16383). Use 0 to disable the advertising timeout.
rgrover1 716:11b41f651697 310 *
rgrover1 716:11b41f651697 311 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 312 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 313 * ble.setAdvertisingTimeout(...) should be replaced with
rgrover1 716:11b41f651697 314 * ble.gap().setAdvertisingTimeout(...).
rgrover1 716:11b41f651697 315 */
rgrover1 716:11b41f651697 316 void setAdvertisingTimeout(uint16_t timeout) {
rgrover1 716:11b41f651697 317 gap().setAdvertisingTimeout(timeout);
rgrover1 716:11b41f651697 318 }
rgrover1 716:11b41f651697 319
rgrover1 716:11b41f651697 320 /**
rgrover1 716:11b41f651697 321 * Setup a particular, user-constructed set of advertisement parameters for
rgrover1 716:11b41f651697 322 * the underlying stack. It would be uncommon for this API to be used
rgrover1 716:11b41f651697 323 * directly; there are other APIs to tweak advertisement parameters
rgrover1 716:11b41f651697 324 * individually (see above).
rgrover1 716:11b41f651697 325 *
rgrover1 716:11b41f651697 326 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 327 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 328 * ble.setAdvertisingParams(...) should be replaced with
rgrover1 716:11b41f651697 329 * ble.gap().setAdvertisingParams(...).
rgrover1 716:11b41f651697 330 */
rgrover1 716:11b41f651697 331 void setAdvertisingParams(const GapAdvertisingParams &advParams) {
rgrover1 716:11b41f651697 332 gap().setAdvertisingParams(advParams);
rgrover1 716:11b41f651697 333 }
rgrover1 716:11b41f651697 334
rgrover1 716:11b41f651697 335 /**
rgrover1 716:11b41f651697 336 * @return Read back advertising parameters. Useful for storing and
rgrover1 716:11b41f651697 337 * restoring parameters rapidly.
rgrover1 716:11b41f651697 338 *
rgrover1 716:11b41f651697 339 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 340 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 341 * ble.getAdvertisingParams(...) should be replaced with
rgrover1 716:11b41f651697 342 * ble.gap().getAdvertisingParams(...).
rgrover1 716:11b41f651697 343 */
rgrover1 716:11b41f651697 344 const GapAdvertisingParams &getAdvertisingParams(void) const {
rgrover1 716:11b41f651697 345 return gap().getAdvertisingParams();
rgrover1 716:11b41f651697 346 }
rgrover1 716:11b41f651697 347
rgrover1 716:11b41f651697 348 /**
rgrover1 716:11b41f651697 349 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 716:11b41f651697 350 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 716:11b41f651697 351 * as an additional 31 bytes if the advertising payload proves to be too
rgrover1 716:11b41f651697 352 * small.
rgrover1 716:11b41f651697 353 *
rgrover1 716:11b41f651697 354 * @param[in] flags
rgrover1 716:11b41f651697 355 * The flags to be added. Please refer to
rgrover1 716:11b41f651697 356 * GapAdvertisingData::Flags for valid flags. Multiple
rgrover1 716:11b41f651697 357 * flags may be specified in combination.
rgrover1 716:11b41f651697 358 *
rgrover1 716:11b41f651697 359 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 360 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 361 * ble.accumulateAdvertisingPayload(flags) should be replaced with
rgrover1 716:11b41f651697 362 * ble.gap().accumulateAdvertisingPayload(flags).
rgrover1 716:11b41f651697 363 */
rgrover1 716:11b41f651697 364 ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
rgrover1 716:11b41f651697 365 return gap().accumulateAdvertisingPayload(flags);
rgrover1 716:11b41f651697 366 }
rgrover1 716:11b41f651697 367
rgrover1 716:11b41f651697 368 /**
rgrover1 716:11b41f651697 369 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 716:11b41f651697 370 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 716:11b41f651697 371 * as an additional 31 bytes if the advertising payload proves to be too
rgrover1 716:11b41f651697 372 * small.
rgrover1 716:11b41f651697 373 *
rgrover1 716:11b41f651697 374 * @param[in] app
rgrover1 716:11b41f651697 375 * The appearance of the peripheral.
rgrover1 716:11b41f651697 376 *
rgrover1 716:11b41f651697 377 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 378 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 379 * ble.accumulateAdvertisingPayload(appearance) should be replaced with
rgrover1 716:11b41f651697 380 * ble.gap().accumulateAdvertisingPayload(appearance).
rgrover1 716:11b41f651697 381 */
rgrover1 716:11b41f651697 382 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
rgrover1 716:11b41f651697 383 return gap().accumulateAdvertisingPayload(app);
rgrover1 716:11b41f651697 384 }
rgrover1 716:11b41f651697 385
rgrover1 716:11b41f651697 386 /**
rgrover1 716:11b41f651697 387 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 716:11b41f651697 388 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
rgrover1 716:11b41f651697 389 * as an additional 31 bytes if the advertising payload proves to be too
rgrover1 716:11b41f651697 390 * small.
rgrover1 716:11b41f651697 391 *
rgrover1 716:11b41f651697 392 * @param[in] app
rgrover1 716:11b41f651697 393 * The max transmit power to be used by the controller. This
rgrover1 716:11b41f651697 394 * is only a hint.
rgrover1 716:11b41f651697 395 *
rgrover1 716:11b41f651697 396 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 397 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 398 * ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
rgrover1 716:11b41f651697 399 * ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
rgrover1 716:11b41f651697 400 */
rgrover1 716:11b41f651697 401 ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
rgrover1 716:11b41f651697 402 return gap().accumulateAdvertisingPayloadTxPower(power);
rgrover1 716:11b41f651697 403 }
rgrover1 716:11b41f651697 404
rgrover1 716:11b41f651697 405 /**
rgrover1 716:11b41f651697 406 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 716:11b41f651697 407 * advertising payload. Please note that the payload is limited to 31 bytes.
rgrover1 716:11b41f651697 408 * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
rgrover1 716:11b41f651697 409 * advertising payload proves to be too small.
rgrover1 716:11b41f651697 410 *
rgrover1 716:11b41f651697 411 * @param type The type which describes the variable length data.
rgrover1 716:11b41f651697 412 * @param data data bytes.
rgrover1 716:11b41f651697 413 * @param len length of data.
rgrover1 716:11b41f651697 414 *
rgrover1 716:11b41f651697 415 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 416 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 417 * ble.accumulateAdvertisingPayload(...) should be replaced with
rgrover1 716:11b41f651697 418 * ble.gap().accumulateAdvertisingPayload(...).
rgrover1 716:11b41f651697 419 */
rgrover1 716:11b41f651697 420 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 716:11b41f651697 421 return gap().accumulateAdvertisingPayload(type, data, len);
rgrover1 716:11b41f651697 422 }
rgrover1 716:11b41f651697 423
rgrover1 716:11b41f651697 424 /**
rgrover1 716:11b41f651697 425 * Setup a particular, user-constructed advertisement payload for the
rgrover1 716:11b41f651697 426 * underlying stack. It would be uncommon for this API to be used directly;
rgrover1 716:11b41f651697 427 * there are other APIs to build an advertisement payload (see above).
rgrover1 716:11b41f651697 428 *
rgrover1 716:11b41f651697 429 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 430 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 431 * ble.setAdvertisingData(...) should be replaced with
rgrover1 716:11b41f651697 432 * ble.gap().setAdvertisingPayload(...).
rgrover1 716:11b41f651697 433 */
rgrover1 716:11b41f651697 434 ble_error_t setAdvertisingData(const GapAdvertisingData &advData) {
rgrover1 716:11b41f651697 435 return gap().setAdvertisingPayload(advData);
rgrover1 716:11b41f651697 436 }
rgrover1 716:11b41f651697 437
rgrover1 716:11b41f651697 438 /**
rgrover1 716:11b41f651697 439 * @return Read back advertising data. Useful for storing and
rgrover1 716:11b41f651697 440 * restoring payload.
rgrover1 716:11b41f651697 441 *
rgrover1 716:11b41f651697 442 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 443 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 444 * ble.getAdvertisingData(...) should be replaced with
rgrover1 716:11b41f651697 445 * ble.gap().getAdvertisingPayload()(...).
rgrover1 716:11b41f651697 446 */
rgrover1 716:11b41f651697 447 const GapAdvertisingData &getAdvertisingData(void) const {
rgrover1 716:11b41f651697 448 return gap().getAdvertisingPayload();
rgrover1 716:11b41f651697 449 }
rgrover1 716:11b41f651697 450
rgrover1 716:11b41f651697 451 /**
rgrover1 716:11b41f651697 452 * Reset any advertising payload prepared from prior calls to
rgrover1 716:11b41f651697 453 * accumulateAdvertisingPayload(). This automatically propagates the re-
rgrover1 716:11b41f651697 454 * initialized adv payload to the underlying stack.
rgrover1 716:11b41f651697 455 *
rgrover1 716:11b41f651697 456 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 457 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 458 * ble.clearAdvertisingPayload(...) should be replaced with
rgrover1 716:11b41f651697 459 * ble.gap().clearAdvertisingPayload(...).
rgrover1 716:11b41f651697 460 */
rgrover1 716:11b41f651697 461 void clearAdvertisingPayload(void) {
rgrover1 716:11b41f651697 462 gap().clearAdvertisingPayload();
rgrover1 716:11b41f651697 463 }
rgrover1 716:11b41f651697 464
rgrover1 716:11b41f651697 465 /**
rgrover1 716:11b41f651697 466 * This API is *deprecated* and resolves to a no-operation. It is left here
rgrover1 716:11b41f651697 467 * to allow older code to compile. Please avoid using this API in new code.
rgrover1 716:11b41f651697 468 * This API will be dropped in a future release.
rgrover1 716:11b41f651697 469 *
rgrover1 716:11b41f651697 470 * Formerly, it would be used to dynamically reset the accumulated advertising
rgrover1 716:11b41f651697 471 * payload and scanResponse; to do this, the application would clear and re-
rgrover1 716:11b41f651697 472 * accumulate a new advertising payload (and scanResponse) before using this
rgrover1 716:11b41f651697 473 * API. Updates to the underlying advertisement payload now happen
rgrover1 716:11b41f651697 474 * implicitly.
rgrover1 716:11b41f651697 475 */
rgrover1 716:11b41f651697 476 ble_error_t setAdvertisingPayload(void) {
rgrover1 716:11b41f651697 477 return BLE_ERROR_NONE;
rgrover1 716:11b41f651697 478 }
rgrover1 716:11b41f651697 479
rgrover1 716:11b41f651697 480 /**
rgrover1 716:11b41f651697 481 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 716:11b41f651697 482 * scanResponse payload.
rgrover1 716:11b41f651697 483 *
rgrover1 716:11b41f651697 484 * @param[in] type The type which describes the variable length data.
rgrover1 716:11b41f651697 485 * @param[in] data data bytes.
rgrover1 716:11b41f651697 486 * @param[in] len length of data.
rgrover1 716:11b41f651697 487 *
rgrover1 716:11b41f651697 488 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 489 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 490 * ble.accumulateScanResponse(...) should be replaced with
rgrover1 716:11b41f651697 491 * ble.gap().accumulateScanResponse(...).
rgrover1 716:11b41f651697 492 */
rgrover1 716:11b41f651697 493 ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 716:11b41f651697 494 return gap().accumulateScanResponse(type, data, len);
rgrover1 716:11b41f651697 495 }
rgrover1 716:11b41f651697 496
rgrover1 716:11b41f651697 497 /**
rgrover1 716:11b41f651697 498 * Reset any scan response prepared from prior calls to
rgrover1 716:11b41f651697 499 * accumulateScanResponse().
rgrover1 716:11b41f651697 500 *
rgrover1 716:11b41f651697 501 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 502 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 503 * ble.clearScanResponse(...) should be replaced with
rgrover1 716:11b41f651697 504 * ble.gap().clearScanResponse(...).
rgrover1 716:11b41f651697 505 */
rgrover1 716:11b41f651697 506 void clearScanResponse(void) {
rgrover1 716:11b41f651697 507 gap().clearScanResponse();
rgrover1 716:11b41f651697 508 }
rgrover1 716:11b41f651697 509
rgrover1 716:11b41f651697 510 /**
rgrover1 716:11b41f651697 511 * Start advertising.
rgrover1 716:11b41f651697 512 *
rgrover1 716:11b41f651697 513 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 514 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 515 * ble.startAdvertising(...) should be replaced with
rgrover1 716:11b41f651697 516 * ble.gap().startAdvertising(...).
rgrover1 716:11b41f651697 517 */
rgrover1 716:11b41f651697 518 ble_error_t startAdvertising(void) {
rgrover1 716:11b41f651697 519 return gap().startAdvertising();
rgrover1 716:11b41f651697 520 }
rgrover1 716:11b41f651697 521
rgrover1 716:11b41f651697 522 /**
rgrover1 716:11b41f651697 523 * Stop advertising.
rgrover1 716:11b41f651697 524 *
rgrover1 716:11b41f651697 525 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 526 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 527 * ble.stopAdvertising(...) should be replaced with
rgrover1 716:11b41f651697 528 * ble.gap().stopAdvertising(...).
rgrover1 716:11b41f651697 529 */
rgrover1 716:11b41f651697 530 ble_error_t stopAdvertising(void) {
rgrover1 716:11b41f651697 531 return gap().stopAdvertising();
rgrover1 716:11b41f651697 532 }
rgrover1 716:11b41f651697 533
rgrover1 716:11b41f651697 534 /**
rgrover1 716:11b41f651697 535 * Setup parameters for GAP scanning--i.e. observer mode.
rgrover1 716:11b41f651697 536 * @param[in] interval
rgrover1 716:11b41f651697 537 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 716:11b41f651697 538 * @param[in] window
rgrover1 716:11b41f651697 539 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 716:11b41f651697 540 * @param[in] timeout
rgrover1 716:11b41f651697 541 * Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1 716:11b41f651697 542 * @param[in] activeScanning
rgrover1 716:11b41f651697 543 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 716:11b41f651697 544 * scan response from a peer if possible.
rgrover1 716:11b41f651697 545 *
rgrover1 716:11b41f651697 546 * The scanning window divided by the interval determines the duty cycle for
rgrover1 716:11b41f651697 547 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 716:11b41f651697 548 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 716:11b41f651697 549 * to have the interval and window set to the same value. In this case,
rgrover1 716:11b41f651697 550 * scanning is continuous, with a change of scanning frequency once every
rgrover1 716:11b41f651697 551 * interval.
rgrover1 716:11b41f651697 552 *
rgrover1 716:11b41f651697 553 * Once the scanning parameters have been configured, scanning can be
rgrover1 716:11b41f651697 554 * enabled by using startScan().
rgrover1 716:11b41f651697 555 *
rgrover1 716:11b41f651697 556 * @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1 716:11b41f651697 557 *
rgrover1 716:11b41f651697 558 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 559 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 560 * ble.setScanParams(...) should be replaced with
rgrover1 716:11b41f651697 561 * ble.gap().setScanParams(...).
rgrover1 716:11b41f651697 562 */
rgrover1 716:11b41f651697 563 ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
rgrover1 716:11b41f651697 564 uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
rgrover1 716:11b41f651697 565 uint16_t timeout = 0,
rgrover1 716:11b41f651697 566 bool activeScanning = false) {
rgrover1 716:11b41f651697 567 return gap().setScanParams(interval, window, timeout, activeScanning);
rgrover1 716:11b41f651697 568 }
rgrover1 716:11b41f651697 569
rgrover1 716:11b41f651697 570 /**
rgrover1 716:11b41f651697 571 * Setup the scanInterval parameter for GAP scanning--i.e. observer mode.
rgrover1 716:11b41f651697 572 * @param[in] interval
rgrover1 716:11b41f651697 573 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 716:11b41f651697 574 *
rgrover1 716:11b41f651697 575 * The scanning window divided by the interval determines the duty cycle for
rgrover1 716:11b41f651697 576 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 716:11b41f651697 577 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 716:11b41f651697 578 * to have the interval and window set to the same value. In this case,
rgrover1 716:11b41f651697 579 * scanning is continuous, with a change of scanning frequency once every
rgrover1 716:11b41f651697 580 * interval.
rgrover1 716:11b41f651697 581 *
rgrover1 716:11b41f651697 582 * Once the scanning parameters have been configured, scanning can be
rgrover1 716:11b41f651697 583 * enabled by using startScan().
rgrover1 716:11b41f651697 584 *
rgrover1 716:11b41f651697 585 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 586 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 587 * ble.setScanInterval(interval) should be replaced with
rgrover1 716:11b41f651697 588 * ble.gap().setScanInterval(interval).
rgrover1 716:11b41f651697 589 */
rgrover1 716:11b41f651697 590 ble_error_t setScanInterval(uint16_t interval) {
rgrover1 716:11b41f651697 591 return gap().setScanInterval(interval);
rgrover1 716:11b41f651697 592 }
rgrover1 716:11b41f651697 593
rgrover1 716:11b41f651697 594 /**
rgrover1 716:11b41f651697 595 * Setup the scanWindow parameter for GAP scanning--i.e. observer mode.
rgrover1 716:11b41f651697 596 * @param[in] window
rgrover1 716:11b41f651697 597 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 716:11b41f651697 598 *
rgrover1 716:11b41f651697 599 * The scanning window divided by the interval determines the duty cycle for
rgrover1 716:11b41f651697 600 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 716:11b41f651697 601 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 716:11b41f651697 602 * to have the interval and window set to the same value. In this case,
rgrover1 716:11b41f651697 603 * scanning is continuous, with a change of scanning frequency once every
rgrover1 716:11b41f651697 604 * interval.
rgrover1 716:11b41f651697 605 *
rgrover1 716:11b41f651697 606 * Once the scanning parameters have been configured, scanning can be
rgrover1 716:11b41f651697 607 * enabled by using startScan().
rgrover1 716:11b41f651697 608 *
rgrover1 716:11b41f651697 609 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 610 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 611 * ble.setScanWindow(window) should be replaced with
rgrover1 716:11b41f651697 612 * ble.gap().setScanWindow(window).
rgrover1 716:11b41f651697 613 */
rgrover1 716:11b41f651697 614 ble_error_t setScanWindow(uint16_t window) {
rgrover1 716:11b41f651697 615 return gap().setScanWindow(window);
rgrover1 716:11b41f651697 616 }
rgrover1 716:11b41f651697 617
rgrover1 716:11b41f651697 618 /**
rgrover1 716:11b41f651697 619 * Setup parameters for GAP scanning--i.e. observer mode.
rgrover1 716:11b41f651697 620 * @param[in] timeout
rgrover1 716:11b41f651697 621 * Scan timeout (in seconds) between 0x0001 and 0xFFFF, 0x0000 disables timeout.
rgrover1 716:11b41f651697 622 *
rgrover1 716:11b41f651697 623 * The scanning window divided by the interval determines the duty cycle for
rgrover1 716:11b41f651697 624 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 716:11b41f651697 625 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 716:11b41f651697 626 * to have the interval and window set to the same value. In this case,
rgrover1 716:11b41f651697 627 * scanning is continuous, with a change of scanning frequency once every
rgrover1 716:11b41f651697 628 * interval.
rgrover1 716:11b41f651697 629 *
rgrover1 716:11b41f651697 630 * Once the scanning parameters have been configured, scanning can be
rgrover1 716:11b41f651697 631 * enabled by using startScan().
rgrover1 716:11b41f651697 632 *
rgrover1 716:11b41f651697 633 * @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1 716:11b41f651697 634 *
rgrover1 716:11b41f651697 635 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 636 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 637 * ble.setScanTimeout(...) should be replaced with
rgrover1 716:11b41f651697 638 * ble.gap().setScanTimeout(...).
rgrover1 716:11b41f651697 639 */
rgrover1 716:11b41f651697 640 ble_error_t setScanTimeout(uint16_t timeout) {
rgrover1 716:11b41f651697 641 return gap().setScanTimeout(timeout);
rgrover1 716:11b41f651697 642 }
rgrover1 716:11b41f651697 643
rgrover1 716:11b41f651697 644 /**
rgrover1 716:11b41f651697 645 * Setup parameters for GAP scanning--i.e. observer mode.
rgrover1 716:11b41f651697 646 * @param[in] activeScanning
rgrover1 716:11b41f651697 647 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 716:11b41f651697 648 * scan response from a peer if possible.
rgrover1 716:11b41f651697 649 *
rgrover1 716:11b41f651697 650 * Once the scanning parameters have been configured, scanning can be
rgrover1 716:11b41f651697 651 * enabled by using startScan().
rgrover1 716:11b41f651697 652 *
rgrover1 716:11b41f651697 653 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 654 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 655 * ble.setActiveScan(...) should be replaced with
rgrover1 716:11b41f651697 656 * ble.gap().setActiveScanning(...).
rgrover1 716:11b41f651697 657 */
rgrover1 716:11b41f651697 658 void setActiveScan(bool activeScanning) {
rgrover1 716:11b41f651697 659 gap().setActiveScanning(activeScanning);
rgrover1 716:11b41f651697 660 }
rgrover1 716:11b41f651697 661
rgrover1 716:11b41f651697 662 /**
rgrover1 716:11b41f651697 663 * Start scanning (Observer Procedure) based on the parameters currently in
rgrover1 716:11b41f651697 664 * effect.
rgrover1 716:11b41f651697 665 *
rgrover1 716:11b41f651697 666 * @param[in] callback
rgrover1 716:11b41f651697 667 * The application specific callback to be invoked upon
rgrover1 716:11b41f651697 668 * receiving every advertisement report. This can be passed in
rgrover1 716:11b41f651697 669 * as NULL, in which case scanning may not be enabled at all.
rgrover1 716:11b41f651697 670 *
rgrover1 716:11b41f651697 671 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 672 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 673 * ble.startScan(callback) should be replaced with
rgrover1 716:11b41f651697 674 * ble.gap().startScan(callback).
rgrover1 716:11b41f651697 675 */
rgrover1 716:11b41f651697 676 ble_error_t startScan(void (*callback)(const Gap::AdvertisementCallbackParams_t *params)) {
rgrover1 716:11b41f651697 677 return gap().startScan(callback);
rgrover1 716:11b41f651697 678 }
rgrover1 716:11b41f651697 679
rgrover1 716:11b41f651697 680 /**
rgrover1 716:11b41f651697 681 * Same as above, but this takes an (object, method) pair for a callback.
rgrover1 716:11b41f651697 682 *
rgrover1 716:11b41f651697 683 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 684 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 685 * ble.startScan(callback) should be replaced with
rgrover1 716:11b41f651697 686 * ble.gap().startScan(object, callback).
rgrover1 716:11b41f651697 687 */
rgrover1 716:11b41f651697 688 template<typename T>
rgrover1 716:11b41f651697 689 ble_error_t startScan(T *object, void (T::*memberCallback)(const Gap::AdvertisementCallbackParams_t *params));
rgrover1 716:11b41f651697 690
rgrover1 716:11b41f651697 691 /**
rgrover1 716:11b41f651697 692 * Stop scanning. The current scanning parameters remain in effect.
rgrover1 716:11b41f651697 693 *
rgrover1 716:11b41f651697 694 * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
rgrover1 716:11b41f651697 695 *
rgrover1 716:11b41f651697 696 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 697 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 698 * ble.stopScan() should be replaced with
rgrover1 716:11b41f651697 699 * ble.gap().stopScan().
rgrover1 716:11b41f651697 700 */
rgrover1 716:11b41f651697 701 ble_error_t stopScan(void) {
rgrover1 716:11b41f651697 702 return gap().stopScan();
rgrover1 716:11b41f651697 703 }
rgrover1 716:11b41f651697 704
rgrover1 716:11b41f651697 705 /**
rgrover1 716:11b41f651697 706 * Create a connection (GAP Link Establishment).
rgrover1 716:11b41f651697 707 * @param peerAddr
rgrover1 716:11b41f651697 708 * 48-bit address, LSB format.
rgrover1 716:11b41f651697 709 * @param peerAddrType
rgrover1 716:11b41f651697 710 * Address type of the peer.
rgrover1 716:11b41f651697 711 * @param connectionParams
rgrover1 716:11b41f651697 712 * Connection parameters.
rgrover1 716:11b41f651697 713 * @param scanParams
rgrover1 716:11b41f651697 714 * Paramters to be used while scanning for the peer.
rgrover1 716:11b41f651697 715 * @return BLE_ERROR_NONE if connection establishment procedure is started
rgrover1 716:11b41f651697 716 * successfully. The onConnection callback (if set) will be invoked upon
rgrover1 716:11b41f651697 717 * a connection event.
rgrover1 716:11b41f651697 718 *
rgrover1 716:11b41f651697 719 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 720 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 721 * ble.connect(...) should be replaced with
rgrover1 716:11b41f651697 722 * ble.gap().connect(...).
rgrover1 716:11b41f651697 723 */
rgrover1 716:11b41f651697 724 ble_error_t connect(const Gap::Address_t peerAddr,
rgrover1 716:11b41f651697 725 Gap::AddressType_t peerAddrType = Gap::ADDR_TYPE_RANDOM_STATIC,
rgrover1 716:11b41f651697 726 const Gap::ConnectionParams_t *connectionParams = NULL,
rgrover1 716:11b41f651697 727 const GapScanningParams *scanParams = NULL) {
rgrover1 716:11b41f651697 728 return gap().connect(peerAddr, peerAddrType, connectionParams, scanParams);
rgrover1 716:11b41f651697 729 }
rgrover1 716:11b41f651697 730
rgrover1 716:11b41f651697 731 /**
rgrover1 716:11b41f651697 732 * This call initiates the disconnection procedure, and its completion will
rgrover1 716:11b41f651697 733 * be communicated to the application with an invocation of the
rgrover1 716:11b41f651697 734 * onDisconnection callback.
rgrover1 716:11b41f651697 735 *
rgrover1 716:11b41f651697 736 * @param[in] connectionHandle
rgrover1 716:11b41f651697 737 * @param[in] reason
rgrover1 716:11b41f651697 738 * The reason for disconnection to be sent back to the peer.
rgrover1 716:11b41f651697 739 */
rgrover1 716:11b41f651697 740 ble_error_t disconnect(Gap::Handle_t connectionHandle, Gap::DisconnectionReason_t reason) {
rgrover1 716:11b41f651697 741 return gap().disconnect(connectionHandle, reason);
rgrover1 716:11b41f651697 742 }
rgrover1 716:11b41f651697 743
rgrover1 716:11b41f651697 744 /**
rgrover1 716:11b41f651697 745 * This call initiates the disconnection procedure, and its completion will
rgrover1 716:11b41f651697 746 * be communicated to the application with an invocation of the
rgrover1 716:11b41f651697 747 * onDisconnection callback.
rgrover1 716:11b41f651697 748 *
rgrover1 716:11b41f651697 749 * @param reason
rgrover1 716:11b41f651697 750 * The reason for disconnection to be sent back to the peer.
rgrover1 716:11b41f651697 751 *
rgrover1 716:11b41f651697 752 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 753 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 754 * ble.disconnect(reason) should be replaced with
rgrover1 716:11b41f651697 755 * ble.gap().disconnect(reason).
rgrover1 716:11b41f651697 756 *
rgrover1 716:11b41f651697 757 * @note: this version of disconnect() doesn't take a connection handle. It
rgrover1 716:11b41f651697 758 * will work reliably only for stacks which are limited to a single
rgrover1 716:11b41f651697 759 * connection. This API should be considered *deprecated* in favour of the
rgrover1 716:11b41f651697 760 * alternative which takes a connection handle. It will be dropped in the future.
rgrover1 716:11b41f651697 761 */
rgrover1 716:11b41f651697 762 ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
rgrover1 716:11b41f651697 763 return gap().disconnect(reason);
rgrover1 716:11b41f651697 764 }
rgrover1 716:11b41f651697 765
rgrover1 716:11b41f651697 766 /**
rgrover1 716:11b41f651697 767 * Returns the current GAP state of the device using a bitmask which
rgrover1 716:11b41f651697 768 * describes whether the device is advertising and/or connected.
rgrover1 716:11b41f651697 769 *
rgrover1 716:11b41f651697 770 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 771 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 772 * ble.getGapState() should be replaced with
rgrover1 716:11b41f651697 773 * ble.gap().getState().
rgrover1 716:11b41f651697 774 */
rgrover1 716:11b41f651697 775 Gap::GapState_t getGapState(void) const {
rgrover1 716:11b41f651697 776 return gap().getState();
rgrover1 716:11b41f651697 777 }
rgrover1 716:11b41f651697 778
rgrover1 716:11b41f651697 779 /**
rgrover1 716:11b41f651697 780 * Get the GAP peripheral preferred connection parameters. These are the
rgrover1 716:11b41f651697 781 * defaults that the peripheral would like to have in a connection. The
rgrover1 716:11b41f651697 782 * choice of the connection parameters is eventually up to the central.
rgrover1 716:11b41f651697 783 *
rgrover1 716:11b41f651697 784 * @param[out] params
rgrover1 716:11b41f651697 785 * The structure where the parameters will be stored. Memory
rgrover1 716:11b41f651697 786 * for this is owned by the caller.
rgrover1 716:11b41f651697 787 *
rgrover1 716:11b41f651697 788 * @return BLE_ERROR_NONE if the parameters were successfully filled into
rgrover1 716:11b41f651697 789 * the given structure pointed to by params.
rgrover1 716:11b41f651697 790 *
rgrover1 716:11b41f651697 791 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 792 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 793 * ble.getPreferredConnectionParams() should be replaced with
rgrover1 716:11b41f651697 794 * ble.gap().getPreferredConnectionParams().
rgrover1 716:11b41f651697 795 */
rgrover1 716:11b41f651697 796 ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params) {
rgrover1 716:11b41f651697 797 return gap().getPreferredConnectionParams(params);
rgrover1 716:11b41f651697 798 }
rgrover1 716:11b41f651697 799
rgrover1 716:11b41f651697 800 /**
rgrover1 716:11b41f651697 801 * Set the GAP peripheral preferred connection parameters. These are the
rgrover1 716:11b41f651697 802 * defaults that the peripheral would like to have in a connection. The
rgrover1 716:11b41f651697 803 * choice of the connection parameters is eventually up to the central.
rgrover1 716:11b41f651697 804 *
rgrover1 716:11b41f651697 805 * @param[in] params
rgrover1 716:11b41f651697 806 * The structure containing the desired parameters.
rgrover1 716:11b41f651697 807 *
rgrover1 716:11b41f651697 808 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 809 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 810 * ble.setPreferredConnectionParams() should be replaced with
rgrover1 716:11b41f651697 811 * ble.gap().setPreferredConnectionParams().
rgrover1 716:11b41f651697 812 */
rgrover1 716:11b41f651697 813 ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params) {
rgrover1 716:11b41f651697 814 return gap().setPreferredConnectionParams(params);
rgrover1 716:11b41f651697 815 }
rgrover1 716:11b41f651697 816
rgrover1 716:11b41f651697 817 /**
rgrover1 716:11b41f651697 818 * Update connection parameters while in the peripheral role.
rgrover1 716:11b41f651697 819 * @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
rgrover1 716:11b41f651697 820 * the central to perform the procedure.
rgrover1 716:11b41f651697 821 * @param[in] handle
rgrover1 716:11b41f651697 822 * Connection Handle
rgrover1 716:11b41f651697 823 * @param[in] params
rgrover1 716:11b41f651697 824 * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
rgrover1 716:11b41f651697 825 * the parameters in the PPCP characteristic of the GAP service will be used instead.
rgrover1 716:11b41f651697 826 *
rgrover1 716:11b41f651697 827 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 828 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 829 * ble.updateConnectionParams() should be replaced with
rgrover1 716:11b41f651697 830 * ble.gap().updateConnectionParams().
rgrover1 716:11b41f651697 831 */
rgrover1 716:11b41f651697 832 ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
rgrover1 716:11b41f651697 833 return gap().updateConnectionParams(handle, params);
rgrover1 716:11b41f651697 834 }
rgrover1 716:11b41f651697 835
rgrover1 716:11b41f651697 836 /**
rgrover1 716:11b41f651697 837 * Set the device name characteristic in the GAP service.
rgrover1 716:11b41f651697 838 * @param[in] deviceName
rgrover1 716:11b41f651697 839 * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
rgrover1 716:11b41f651697 840 *
rgrover1 716:11b41f651697 841 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 842 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 843 * ble.setDeviceName() should be replaced with
rgrover1 716:11b41f651697 844 * ble.gap().setDeviceName().
rgrover1 716:11b41f651697 845 */
rgrover1 716:11b41f651697 846 ble_error_t setDeviceName(const uint8_t *deviceName) {
rgrover1 716:11b41f651697 847 return gap().setDeviceName(deviceName);
rgrover1 716:11b41f651697 848 }
rgrover1 716:11b41f651697 849
rgrover1 716:11b41f651697 850 /**
rgrover1 716:11b41f651697 851 * Get the value of the device name characteristic in the GAP service.
rgrover1 716:11b41f651697 852 * @param[out] deviceName
rgrover1 716:11b41f651697 853 * Pointer to an empty buffer where the UTF-8 *non NULL-
rgrover1 716:11b41f651697 854 * terminated* string will be placed. Set this
rgrover1 716:11b41f651697 855 * value to NULL in order to obtain the deviceName-length
rgrover1 716:11b41f651697 856 * from the 'length' parameter.
rgrover1 716:11b41f651697 857 *
rgrover1 716:11b41f651697 858 * @param[in/out] lengthP
rgrover1 716:11b41f651697 859 * (on input) Length of the buffer pointed to by deviceName;
rgrover1 716:11b41f651697 860 * (on output) the complete device name length (without the
rgrover1 716:11b41f651697 861 * null terminator).
rgrover1 716:11b41f651697 862 *
rgrover1 716:11b41f651697 863 * @note If the device name is longer than the size of the supplied buffer,
rgrover1 716:11b41f651697 864 * length will return the complete device name length, and not the
rgrover1 716:11b41f651697 865 * number of bytes actually returned in deviceName. The application may
rgrover1 716:11b41f651697 866 * use this information to retry with a suitable buffer size.
rgrover1 716:11b41f651697 867 *
rgrover1 716:11b41f651697 868 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 869 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 870 * ble.getDeviceName() should be replaced with
rgrover1 716:11b41f651697 871 * ble.gap().getDeviceName().
rgrover1 716:11b41f651697 872 */
rgrover1 716:11b41f651697 873 ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
rgrover1 716:11b41f651697 874 return gap().getDeviceName(deviceName, lengthP);
rgrover1 716:11b41f651697 875 }
rgrover1 716:11b41f651697 876
rgrover1 716:11b41f651697 877 /**
rgrover1 716:11b41f651697 878 * Set the appearance characteristic in the GAP service.
rgrover1 716:11b41f651697 879 * @param[in] appearance
rgrover1 716:11b41f651697 880 * The new value for the device-appearance.
rgrover1 716:11b41f651697 881 *
rgrover1 716:11b41f651697 882 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 883 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 884 * ble.setAppearance() should be replaced with
rgrover1 716:11b41f651697 885 * ble.gap().setAppearance().
rgrover1 716:11b41f651697 886 */
rgrover1 716:11b41f651697 887 ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
rgrover1 716:11b41f651697 888 return gap().setAppearance(appearance);
rgrover1 716:11b41f651697 889 }
rgrover1 716:11b41f651697 890
rgrover1 716:11b41f651697 891 /**
rgrover1 716:11b41f651697 892 * Get the appearance characteristic in the GAP service.
rgrover1 716:11b41f651697 893 * @param[out] appearance
rgrover1 716:11b41f651697 894 * The new value for the device-appearance.
rgrover1 716:11b41f651697 895 *
rgrover1 716:11b41f651697 896 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 897 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 898 * ble.getAppearance() should be replaced with
rgrover1 716:11b41f651697 899 * ble.gap().getAppearance().
rgrover1 716:11b41f651697 900 */
rgrover1 716:11b41f651697 901 ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
rgrover1 716:11b41f651697 902 return gap().getAppearance(appearanceP);
rgrover1 716:11b41f651697 903 }
rgrover1 716:11b41f651697 904
rgrover1 716:11b41f651697 905 /**
rgrover1 716:11b41f651697 906 * Set the radio's transmit power.
rgrover1 716:11b41f651697 907 * @param[in] txPower Radio transmit power in dBm.
rgrover1 716:11b41f651697 908 *
rgrover1 716:11b41f651697 909 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 910 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 911 * ble.setTxPower() should be replaced with
rgrover1 716:11b41f651697 912 * ble.gap().setTxPower().
rgrover1 716:11b41f651697 913 */
rgrover1 716:11b41f651697 914 ble_error_t setTxPower(int8_t txPower) {
rgrover1 716:11b41f651697 915 return gap().setTxPower(txPower);
rgrover1 716:11b41f651697 916 }
rgrover1 716:11b41f651697 917
rgrover1 716:11b41f651697 918 /**
rgrover1 716:11b41f651697 919 * Query the underlying stack for permitted arguments for setTxPower().
rgrover1 716:11b41f651697 920 *
rgrover1 716:11b41f651697 921 * @param[out] valueArrayPP
rgrover1 716:11b41f651697 922 * Out parameter to receive the immutable array of Tx values.
rgrover1 716:11b41f651697 923 * @param[out] countP
rgrover1 716:11b41f651697 924 * Out parameter to receive the array's size.
rgrover1 716:11b41f651697 925 *
rgrover1 716:11b41f651697 926 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 927 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 928 * ble.getPermittedTxPowerValues() should be replaced with
rgrover1 716:11b41f651697 929 * ble.gap().getPermittedTxPowerValues().
rgrover1 716:11b41f651697 930 */
rgrover1 716:11b41f651697 931 void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
rgrover1 716:11b41f651697 932 gap().getPermittedTxPowerValues(valueArrayPP, countP);
rgrover1 716:11b41f651697 933 }
rgrover1 716:11b41f651697 934
rgrover1 716:11b41f651697 935 /**
rgrover1 716:11b41f651697 936 * Add a service declaration to the local server ATT table. Also add the
rgrover1 716:11b41f651697 937 * characteristics contained within.
rgrover1 716:11b41f651697 938 *
rgrover1 716:11b41f651697 939 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 940 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 941 * to ble.addService() should be replaced with
rgrover1 716:11b41f651697 942 * ble.gattServer().addService().
rgrover1 716:11b41f651697 943 */
rgrover1 716:11b41f651697 944 ble_error_t addService(GattService &service) {
rgrover1 716:11b41f651697 945 return gattServer().addService(service);
rgrover1 716:11b41f651697 946 }
rgrover1 716:11b41f651697 947
rgrover1 716:11b41f651697 948 /**
rgrover1 716:11b41f651697 949 * Read the value of a characteristic from the local GattServer
rgrover1 716:11b41f651697 950 * @param[in] attributeHandle
rgrover1 716:11b41f651697 951 * Attribute handle for the value attribute of the characteristic.
rgrover1 716:11b41f651697 952 * @param[out] buffer
rgrover1 716:11b41f651697 953 * A buffer to hold the value being read.
rgrover1 716:11b41f651697 954 * @param[in/out] lengthP
rgrover1 716:11b41f651697 955 * Length of the buffer being supplied. If the attribute
rgrover1 716:11b41f651697 956 * value is longer than the size of the supplied buffer,
rgrover1 716:11b41f651697 957 * this variable will hold upon return the total attribute value length
rgrover1 716:11b41f651697 958 * (excluding offset). The application may use this
rgrover1 716:11b41f651697 959 * information to allocate a suitable buffer size.
rgrover1 716:11b41f651697 960 *
rgrover1 716:11b41f651697 961 * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
rgrover1 716:11b41f651697 962 *
rgrover1 716:11b41f651697 963 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 964 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 965 * to ble.readCharacteristicValue() should be replaced with
rgrover1 716:11b41f651697 966 * ble.gattServer().read().
rgrover1 716:11b41f651697 967 */
rgrover1 716:11b41f651697 968 ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
rgrover1 716:11b41f651697 969 return gattServer().read(attributeHandle, buffer, lengthP);
rgrover1 716:11b41f651697 970 }
rgrover1 716:11b41f651697 971
rgrover1 716:11b41f651697 972 /**
rgrover1 716:11b41f651697 973 * Read the value of a characteristic from the local GattServer
rgrover1 716:11b41f651697 974 * @param[in] connectionHandle
rgrover1 716:11b41f651697 975 * Connection Handle.
rgrover1 716:11b41f651697 976 * @param[in] attributeHandle
rgrover1 716:11b41f651697 977 * Attribute handle for the value attribute of the characteristic.
rgrover1 716:11b41f651697 978 * @param[out] buffer
rgrover1 716:11b41f651697 979 * A buffer to hold the value being read.
rgrover1 716:11b41f651697 980 * @param[in/out] lengthP
rgrover1 716:11b41f651697 981 * Length of the buffer being supplied. If the attribute
rgrover1 716:11b41f651697 982 * value is longer than the size of the supplied buffer,
rgrover1 716:11b41f651697 983 * this variable will hold upon return the total attribute value length
rgrover1 716:11b41f651697 984 * (excluding offset). The application may use this
rgrover1 716:11b41f651697 985 * information to allocate a suitable buffer size.
rgrover1 716:11b41f651697 986 *
rgrover1 716:11b41f651697 987 * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
rgrover1 716:11b41f651697 988 *
rgrover1 716:11b41f651697 989 * @note This API is a version of above with an additional connection handle
rgrover1 716:11b41f651697 990 * parameter to allow fetches for connection-specific multivalued
rgrover1 733:718a3566b4ce 991 * attributes (such as the CCCDs).
rgrover1 716:11b41f651697 992 *
rgrover1 716:11b41f651697 993 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 994 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 995 * to ble.readCharacteristicValue() should be replaced with
rgrover1 716:11b41f651697 996 * ble.gattServer().read().
rgrover1 716:11b41f651697 997 */
rgrover1 716:11b41f651697 998 ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
rgrover1 716:11b41f651697 999 return gattServer().read(connectionHandle, attributeHandle, buffer, lengthP);
rgrover1 716:11b41f651697 1000 }
rgrover1 716:11b41f651697 1001
rgrover1 716:11b41f651697 1002 /**
rgrover1 716:11b41f651697 1003 * Update the value of a characteristic on the local GattServer.
rgrover1 716:11b41f651697 1004 *
rgrover1 716:11b41f651697 1005 * @param[in] attributeHandle
rgrover1 716:11b41f651697 1006 * Handle for the value attribute of the Characteristic.
rgrover1 716:11b41f651697 1007 * @param[in] value
rgrover1 716:11b41f651697 1008 * A pointer to a buffer holding the new value
rgrover1 716:11b41f651697 1009 * @param[in] size
rgrover1 716:11b41f651697 1010 * Size of the new value (in bytes).
rgrover1 716:11b41f651697 1011 * @param[in] localOnly
rgrover1 716:11b41f651697 1012 * Should this update be kept on the local
rgrover1 716:11b41f651697 1013 * GattServer regardless of the state of the
rgrover1 716:11b41f651697 1014 * notify/indicate flag in the CCCD for this
rgrover1 716:11b41f651697 1015 * Characteristic? If set to true, no notification
rgrover1 716:11b41f651697 1016 * or indication is generated.
rgrover1 716:11b41f651697 1017 *
rgrover1 716:11b41f651697 1018 * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
rgrover1 716:11b41f651697 1019 *
rgrover1 716:11b41f651697 1020 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1021 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1022 * to ble.updateCharacteristicValue() should be replaced with
rgrover1 716:11b41f651697 1023 * ble.gattServer().write().
rgrover1 716:11b41f651697 1024 */
rgrover1 716:11b41f651697 1025 ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle,
rgrover1 716:11b41f651697 1026 const uint8_t *value,
rgrover1 716:11b41f651697 1027 uint16_t size,
rgrover1 716:11b41f651697 1028 bool localOnly = false) {
rgrover1 716:11b41f651697 1029 return gattServer().write(attributeHandle, value, size, localOnly);
rgrover1 716:11b41f651697 1030 }
rgrover1 716:11b41f651697 1031
rgrover1 716:11b41f651697 1032 /**
rgrover1 716:11b41f651697 1033 * Update the value of a characteristic on the local GattServer. A version
rgrover1 716:11b41f651697 1034 * of the same as above with connection handle parameter to allow updates
rgrover1 733:718a3566b4ce 1035 * for connection-specific multivalued attributes (such as the CCCDs).
rgrover1 716:11b41f651697 1036 *
rgrover1 716:11b41f651697 1037 * @param[in] connectionHandle
rgrover1 716:11b41f651697 1038 * Connection Handle.
rgrover1 716:11b41f651697 1039 * @param[in] attributeHandle
rgrover1 716:11b41f651697 1040 * Handle for the value attribute of the Characteristic.
rgrover1 716:11b41f651697 1041 * @param[in] value
rgrover1 716:11b41f651697 1042 * A pointer to a buffer holding the new value
rgrover1 716:11b41f651697 1043 * @param[in] size
rgrover1 716:11b41f651697 1044 * Size of the new value (in bytes).
rgrover1 716:11b41f651697 1045 * @param[in] localOnly
rgrover1 716:11b41f651697 1046 * Should this update be kept on the local
rgrover1 716:11b41f651697 1047 * GattServer regardless of the state of the
rgrover1 716:11b41f651697 1048 * notify/indicate flag in the CCCD for this
rgrover1 716:11b41f651697 1049 * Characteristic? If set to true, no notification
rgrover1 716:11b41f651697 1050 * or indication is generated.
rgrover1 716:11b41f651697 1051 *
rgrover1 716:11b41f651697 1052 * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
rgrover1 716:11b41f651697 1053 *
rgrover1 716:11b41f651697 1054 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1055 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1056 * to ble.updateCharacteristicValue() should be replaced with
rgrover1 716:11b41f651697 1057 * ble.gattServer().write().
rgrover1 716:11b41f651697 1058 */
rgrover1 716:11b41f651697 1059 ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle,
rgrover1 716:11b41f651697 1060 GattAttribute::Handle_t attributeHandle,
rgrover1 716:11b41f651697 1061 const uint8_t *value,
rgrover1 716:11b41f651697 1062 uint16_t size,
rgrover1 716:11b41f651697 1063 bool localOnly = false) {
rgrover1 716:11b41f651697 1064 return gattServer().write(connectionHandle, attributeHandle, value, size, localOnly);
rgrover1 716:11b41f651697 1065 }
rgrover1 716:11b41f651697 1066
rgrover1 716:11b41f651697 1067 /**
rgrover1 716:11b41f651697 1068 * Enable the BLE stack's Security Manager. The Security Manager implements
rgrover1 716:11b41f651697 1069 * the actual cryptographic algorithms and protocol exchanges that allow two
rgrover1 716:11b41f651697 1070 * devices to securely exchange data and privately detect each other.
rgrover1 716:11b41f651697 1071 * Calling this API is a prerequisite for encryption and pairing (bonding).
rgrover1 716:11b41f651697 1072 *
rgrover1 716:11b41f651697 1073 * @param[in] enableBonding Allow for bonding.
rgrover1 716:11b41f651697 1074 * @param[in] requireMITM Require protection for man-in-the-middle attacks.
rgrover1 716:11b41f651697 1075 * @param[in] iocaps To specify IO capabilities of this peripheral,
rgrover1 716:11b41f651697 1076 * such as availability of a display or keyboard to
rgrover1 716:11b41f651697 1077 * support out-of-band exchanges of security data.
rgrover1 716:11b41f651697 1078 * @param[in] passkey To specify a static passkey.
rgrover1 716:11b41f651697 1079 *
rgrover1 716:11b41f651697 1080 * @return BLE_ERROR_NONE on success.
rgrover1 716:11b41f651697 1081 *
rgrover1 716:11b41f651697 1082 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1083 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1084 * call to ble.initializeSecurity(...) should be replaced with
rgrover1 716:11b41f651697 1085 * ble.securityManager().init(...).
rgrover1 716:11b41f651697 1086 */
rgrover1 716:11b41f651697 1087 ble_error_t initializeSecurity(bool enableBonding = true,
rgrover1 716:11b41f651697 1088 bool requireMITM = true,
rgrover1 716:11b41f651697 1089 SecurityManager::SecurityIOCapabilities_t iocaps = SecurityManager::IO_CAPS_NONE,
rgrover1 716:11b41f651697 1090 const SecurityManager::Passkey_t passkey = NULL) {
rgrover1 716:11b41f651697 1091 return securityManager().init(enableBonding, requireMITM, iocaps, passkey);
rgrover1 716:11b41f651697 1092 }
rgrover1 716:11b41f651697 1093
rgrover1 716:11b41f651697 1094 /**
rgrover1 716:11b41f651697 1095 * Get the security status of a connection.
rgrover1 716:11b41f651697 1096 *
rgrover1 716:11b41f651697 1097 * @param[in] connectionHandle Handle to identify the connection.
rgrover1 716:11b41f651697 1098 * @param[out] securityStatusP security status.
rgrover1 716:11b41f651697 1099 *
rgrover1 716:11b41f651697 1100 * @return BLE_SUCCESS Or appropriate error code indicating reason for failure.
rgrover1 716:11b41f651697 1101 *
rgrover1 716:11b41f651697 1102 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1103 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1104 * call to ble.getLinkSecurity(...) should be replaced with
rgrover1 716:11b41f651697 1105 * ble.securityManager().getLinkSecurity(...).
rgrover1 716:11b41f651697 1106 */
rgrover1 716:11b41f651697 1107 ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, SecurityManager::LinkSecurityStatus_t *securityStatusP) {
rgrover1 716:11b41f651697 1108 return securityManager().getLinkSecurity(connectionHandle, securityStatusP);
rgrover1 716:11b41f651697 1109 }
rgrover1 716:11b41f651697 1110
rgrover1 716:11b41f651697 1111 /**
rgrover1 716:11b41f651697 1112 * Delete all peer device context and all related bonding information from
rgrover1 716:11b41f651697 1113 * the database within the security manager.
rgrover1 716:11b41f651697 1114 *
rgrover1 716:11b41f651697 1115 * @retval BLE_ERROR_NONE On success, else an error code indicating reason for failure.
rgrover1 716:11b41f651697 1116 * @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization and/or
rgrover1 716:11b41f651697 1117 * application registration.
rgrover1 716:11b41f651697 1118 *
rgrover1 716:11b41f651697 1119 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1120 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1121 * call to ble.purgeAllBondingState() should be replaced with
rgrover1 716:11b41f651697 1122 * ble.securityManager().purgeAllBondingState().
rgrover1 716:11b41f651697 1123 */
rgrover1 716:11b41f651697 1124 ble_error_t purgeAllBondingState(void) {
rgrover1 716:11b41f651697 1125 return securityManager().purgeAllBondingState();
rgrover1 716:11b41f651697 1126 }
rgrover1 716:11b41f651697 1127
rgrover1 716:11b41f651697 1128 /**
rgrover1 716:11b41f651697 1129 * Setup a callback for timeout events. Refer to Gap::TimeoutSource_t for
rgrover1 716:11b41f651697 1130 * possible event types.
rgrover1 716:11b41f651697 1131 *
rgrover1 716:11b41f651697 1132 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 751:868b6dd7a6bf 1133 * You should use the parallel API from Gap directly. A former call
rgrover1 716:11b41f651697 1134 * to ble.onTimeout(callback) should be replaced with
rgrover1 716:11b41f651697 1135 * ble.gap().onTimeout(callback).
rgrover1 716:11b41f651697 1136 */
rgrover1 716:11b41f651697 1137 void onTimeout(Gap::TimeoutEventCallback_t timeoutCallback) {
rgrover1 716:11b41f651697 1138 gap().onTimeout(timeoutCallback);
rgrover1 716:11b41f651697 1139 }
rgrover1 716:11b41f651697 1140
rgrover1 716:11b41f651697 1141 /**
rgrover1 716:11b41f651697 1142 * Setup a callback for connection events. Refer to Gap::ConnectionEventCallback_t.
rgrover1 716:11b41f651697 1143 *
rgrover1 716:11b41f651697 1144 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 751:868b6dd7a6bf 1145 * You should use the parallel API from Gap directly. A former call
rgrover1 716:11b41f651697 1146 * to ble.onConnection(callback) should be replaced with
rgrover1 716:11b41f651697 1147 * ble.gap().onConnection(callback).
rgrover1 716:11b41f651697 1148 */
rgrover1 716:11b41f651697 1149 void onConnection(Gap::ConnectionEventCallback_t connectionCallback) {
rgrover1 716:11b41f651697 1150 gap().onConnection(connectionCallback);
rgrover1 716:11b41f651697 1151 }
rgrover1 716:11b41f651697 1152
rgrover1 716:11b41f651697 1153 /**
rgrover1 829:9072de50087b 1154 * Append to a chain of callbacks to be invoked upon GAP disconnection.
rgrover1 716:11b41f651697 1155 *
rgrover1 716:11b41f651697 1156 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 751:868b6dd7a6bf 1157 * You should use the parallel API from Gap directly. A former call
rgrover1 716:11b41f651697 1158 * to ble.onDisconnection(callback) should be replaced with
rgrover1 716:11b41f651697 1159 * ble.gap().onDisconnection(callback).
rgrover1 716:11b41f651697 1160 */
rgrover1 716:11b41f651697 1161 void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback) {
rgrover1 716:11b41f651697 1162 gap().onDisconnection(disconnectionCallback);
rgrover1 716:11b41f651697 1163 }
rgrover1 716:11b41f651697 1164
rgrover1 716:11b41f651697 1165 template<typename T>
rgrover1 829:9072de50087b 1166 void onDisconnection(T *tptr, void (T::*mptr)(const Gap::DisconnectionCallbackParams_t*)) {
rgrover1 829:9072de50087b 1167 gap().onDisconnection(tptr, mptr);
rgrover1 716:11b41f651697 1168 }
rgrover1 716:11b41f651697 1169
rgrover1 716:11b41f651697 1170 /**
rgrover1 716:11b41f651697 1171 * Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1 716:11b41f651697 1172 * (nACTIVE) signals from the stack that notify the application when the
rgrover1 716:11b41f651697 1173 * radio is in use. The signal is sent using software interrupt.
rgrover1 716:11b41f651697 1174 *
rgrover1 716:11b41f651697 1175 * The ACTIVE signal is sent before the Radio Event starts. The nACTIVE
rgrover1 716:11b41f651697 1176 * signal is sent at the end of the Radio Event. These signals can be used
rgrover1 716:11b41f651697 1177 * by the application programmer to synchronize application logic with radio
rgrover1 716:11b41f651697 1178 * activity. For example, the ACTIVE signal can be used to shut off external
rgrover1 716:11b41f651697 1179 * devices to manage peak current drawn during periods when the radio is on,
rgrover1 716:11b41f651697 1180 * or to trigger sensor data collection for transmission in the Radio Event.
rgrover1 716:11b41f651697 1181 *
rgrover1 716:11b41f651697 1182 * @param callback
rgrover1 716:11b41f651697 1183 * The application handler to be invoked in response to a radio
rgrover1 716:11b41f651697 1184 * ACTIVE/INACTIVE event.
rgrover1 716:11b41f651697 1185 *
rgrover1 716:11b41f651697 1186 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 751:868b6dd7a6bf 1187 * You should use the parallel API from Gap directly. A former call
rgrover1 716:11b41f651697 1188 * to ble.onRadioNotification(...) should be replaced with
rgrover1 716:11b41f651697 1189 * ble.gap().onRadioNotification(...).
rgrover1 716:11b41f651697 1190 */
rgrover1 752:424c2ae44553 1191 void onRadioNotification(void (*callback)(bool)) {
rgrover1 716:11b41f651697 1192 gap().onRadioNotification(callback);
rgrover1 716:11b41f651697 1193 }
rgrover1 716:11b41f651697 1194
rgrover1 716:11b41f651697 1195 /**
rgrover1 716:11b41f651697 1196 * Add a callback for the GATT event DATA_SENT (which is triggered when
rgrover1 716:11b41f651697 1197 * updates are sent out by GATT in the form of notifications).
rgrover1 716:11b41f651697 1198 *
rgrover1 716:11b41f651697 1199 * @Note: it is possible to chain together multiple onDataSent callbacks
rgrover1 716:11b41f651697 1200 * (potentially from different modules of an application) to receive updates
rgrover1 716:11b41f651697 1201 * to characteristics.
rgrover1 716:11b41f651697 1202 *
rgrover1 716:11b41f651697 1203 * @Note: it is also possible to setup a callback into a member function of
rgrover1 716:11b41f651697 1204 * some object.
rgrover1 716:11b41f651697 1205 *
rgrover1 716:11b41f651697 1206 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1207 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1208 * to ble.onDataSent(...) should be replaced with
rgrover1 716:11b41f651697 1209 * ble.gattServer().onDataSent(...).
rgrover1 716:11b41f651697 1210 */
rgrover1 716:11b41f651697 1211 void onDataSent(void (*callback)(unsigned count)) {
rgrover1 716:11b41f651697 1212 gattServer().onDataSent(callback);
rgrover1 716:11b41f651697 1213 }
rgrover1 716:11b41f651697 1214 template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count)) {
rgrover1 716:11b41f651697 1215 gattServer().onDataSent(objPtr, memberPtr);
rgrover1 716:11b41f651697 1216 }
rgrover1 716:11b41f651697 1217
rgrover1 716:11b41f651697 1218 /**
rgrover1 716:11b41f651697 1219 * Setup a callback for when an attribute has its value updated by or at the
rgrover1 716:11b41f651697 1220 * connected peer. For a peripheral, this callback triggered when the local
rgrover1 716:11b41f651697 1221 * GATT server has an attribute updated by a write command from the peer.
rgrover1 716:11b41f651697 1222 * For a Central, this callback is triggered when a response is received for
rgrover1 716:11b41f651697 1223 * a write request.
rgrover1 716:11b41f651697 1224 *
rgrover1 716:11b41f651697 1225 * @Note: it is possible to chain together multiple onDataWritten callbacks
rgrover1 716:11b41f651697 1226 * (potentially from different modules of an application) to receive updates
rgrover1 716:11b41f651697 1227 * to characteristics. Many services, such as DFU and UART add their own
rgrover1 716:11b41f651697 1228 * onDataWritten callbacks behind the scenes to trap interesting events.
rgrover1 716:11b41f651697 1229 *
rgrover1 716:11b41f651697 1230 * @Note: it is also possible to setup a callback into a member function of
rgrover1 716:11b41f651697 1231 * some object.
rgrover1 716:11b41f651697 1232 *
rgrover1 716:11b41f651697 1233 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1234 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1235 * to ble.onDataWritten(...) should be replaced with
rgrover1 716:11b41f651697 1236 * ble.gattServer().onDataWritten(...).
rgrover1 716:11b41f651697 1237 */
rgrover1 716:11b41f651697 1238 void onDataWritten(void (*callback)(const GattWriteCallbackParams *eventDataP)) {
rgrover1 716:11b41f651697 1239 gattServer().onDataWritten(callback);
rgrover1 716:11b41f651697 1240 }
rgrover1 716:11b41f651697 1241 template <typename T> void onDataWritten(T * objPtr, void (T::*memberPtr)(const GattWriteCallbackParams *context)) {
rgrover1 716:11b41f651697 1242 gattServer().onDataWritten(objPtr, memberPtr);
rgrover1 716:11b41f651697 1243 }
rgrover1 716:11b41f651697 1244
rgrover1 716:11b41f651697 1245 /**
rgrover1 716:11b41f651697 1246 * Setup a callback to be invoked on the peripheral when an attribute is
rgrover1 716:11b41f651697 1247 * being read by a remote client.
rgrover1 716:11b41f651697 1248 *
rgrover1 716:11b41f651697 1249 * @Note: this functionality may not be available on all underlying stacks.
rgrover1 716:11b41f651697 1250 * You could use GattCharacteristic::setReadAuthorizationCallback() as an
rgrover1 716:11b41f651697 1251 * alternative.
rgrover1 716:11b41f651697 1252 *
rgrover1 716:11b41f651697 1253 * @Note: it is possible to chain together multiple onDataRead callbacks
rgrover1 716:11b41f651697 1254 * (potentially from different modules of an application) to receive updates
rgrover1 716:11b41f651697 1255 * to characteristics. Services may add their own onDataRead callbacks
rgrover1 716:11b41f651697 1256 * behind the scenes to trap interesting events.
rgrover1 716:11b41f651697 1257 *
rgrover1 716:11b41f651697 1258 * @Note: it is also possible to setup a callback into a member function of
rgrover1 716:11b41f651697 1259 * some object.
rgrover1 716:11b41f651697 1260 *
rgrover1 716:11b41f651697 1261 * @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
rgrover1 716:11b41f651697 1262 * else BLE_ERROR_NONE.
rgrover1 716:11b41f651697 1263 *
rgrover1 716:11b41f651697 1264 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1265 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1266 * to ble.onDataRead(...) should be replaced with
rgrover1 716:11b41f651697 1267 * ble.gattServer().onDataRead(...).
rgrover1 716:11b41f651697 1268 */
rgrover1 716:11b41f651697 1269 ble_error_t onDataRead(void (*callback)(const GattReadCallbackParams *eventDataP)) {
rgrover1 716:11b41f651697 1270 return gattServer().onDataRead(callback);
rgrover1 716:11b41f651697 1271 }
rgrover1 716:11b41f651697 1272 template <typename T> ble_error_t onDataRead(T * objPtr, void (T::*memberPtr)(const GattReadCallbackParams *context)) {
rgrover1 716:11b41f651697 1273 return gattServer().onDataRead(objPtr, memberPtr);
rgrover1 716:11b41f651697 1274 }
rgrover1 716:11b41f651697 1275
rgrover1 716:11b41f651697 1276 /**
rgrover1 716:11b41f651697 1277 * Setup a callback for when notifications/indications are enabled for a
rgrover1 716:11b41f651697 1278 * characteristic on the local GattServer.
rgrover1 716:11b41f651697 1279 *
rgrover1 716:11b41f651697 1280 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1281 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1282 * to ble.onUpdatesEnabled(callback) should be replaced with
rgrover1 716:11b41f651697 1283 * ble.gattServer().onUpdatesEnabled(callback).
rgrover1 716:11b41f651697 1284 */
rgrover1 716:11b41f651697 1285 void onUpdatesEnabled(GattServer::EventCallback_t callback) {
rgrover1 716:11b41f651697 1286 gattServer().onUpdatesEnabled(callback);
rgrover1 716:11b41f651697 1287 }
rgrover1 716:11b41f651697 1288
rgrover1 716:11b41f651697 1289 /**
rgrover1 716:11b41f651697 1290 * Setup a callback for when notifications/indications are disabled for a
rgrover1 716:11b41f651697 1291 * characteristic on the local GattServer.
rgrover1 716:11b41f651697 1292 *
rgrover1 716:11b41f651697 1293 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1294 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1295 * to ble.onUpdatesEnabled(callback) should be replaced with
rgrover1 716:11b41f651697 1296 * ble.gattServer().onUpdatesEnabled(callback).
rgrover1 716:11b41f651697 1297 */
rgrover1 716:11b41f651697 1298 void onUpdatesDisabled(GattServer::EventCallback_t callback) {
rgrover1 716:11b41f651697 1299 gattServer().onUpdatesDisabled(callback);
rgrover1 716:11b41f651697 1300 }
rgrover1 716:11b41f651697 1301
rgrover1 716:11b41f651697 1302 /**
rgrover1 716:11b41f651697 1303 * Setup a callback for when the GATT server receives a response for an
rgrover1 716:11b41f651697 1304 * indication event sent previously.
rgrover1 716:11b41f651697 1305 *
rgrover1 716:11b41f651697 1306 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1307 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1308 * to ble.onConfirmationReceived(callback) should be replaced with
rgrover1 716:11b41f651697 1309 * ble.gattServer().onConfirmationReceived(callback).
rgrover1 716:11b41f651697 1310 */
rgrover1 716:11b41f651697 1311 void onConfirmationReceived(GattServer::EventCallback_t callback) {
rgrover1 716:11b41f651697 1312 gattServer().onConfirmationReceived(callback);
rgrover1 716:11b41f651697 1313 }
rgrover1 716:11b41f651697 1314
rgrover1 716:11b41f651697 1315 /**
rgrover1 716:11b41f651697 1316 * Setup a callback for when the security setup procedure (key generation
rgrover1 716:11b41f651697 1317 * and exchange) for a link has started. This will be skipped for bonded
rgrover1 716:11b41f651697 1318 * devices. The callback is passed in parameters received from the peer's
rgrover1 716:11b41f651697 1319 * security request: bool allowBonding, bool requireMITM, and
rgrover1 716:11b41f651697 1320 * SecurityIOCapabilities_t.
rgrover1 716:11b41f651697 1321 *
rgrover1 716:11b41f651697 1322 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1323 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1324 * call to ble.onSecuritySetupInitiated(callback) should be replaced with
rgrover1 716:11b41f651697 1325 * ble.securityManager().onSecuritySetupInitiated(callback).
rgrover1 716:11b41f651697 1326 */
rgrover1 716:11b41f651697 1327 void onSecuritySetupInitiated(SecurityManager::SecuritySetupInitiatedCallback_t callback) {
rgrover1 716:11b41f651697 1328 securityManager().onSecuritySetupInitiated(callback);
rgrover1 716:11b41f651697 1329 }
rgrover1 716:11b41f651697 1330
rgrover1 716:11b41f651697 1331 /**
rgrover1 716:11b41f651697 1332 * Setup a callback for when the security setup procedure (key generation
rgrover1 716:11b41f651697 1333 * and exchange) for a link has completed. This will be skipped for bonded
rgrover1 716:11b41f651697 1334 * devices. The callback is passed in the success/failure status of the
rgrover1 716:11b41f651697 1335 * security setup procedure.
rgrover1 716:11b41f651697 1336 *
rgrover1 716:11b41f651697 1337 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1338 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1339 * call to ble.onSecuritySetupCompleted(callback) should be replaced with
rgrover1 716:11b41f651697 1340 * ble.securityManager().onSecuritySetupCompleted(callback).
rgrover1 716:11b41f651697 1341 */
rgrover1 716:11b41f651697 1342 void onSecuritySetupCompleted(SecurityManager::SecuritySetupCompletedCallback_t callback) {
rgrover1 716:11b41f651697 1343 securityManager().onSecuritySetupCompleted(callback);
rgrover1 716:11b41f651697 1344 }
rgrover1 716:11b41f651697 1345
rgrover1 716:11b41f651697 1346 /**
rgrover1 716:11b41f651697 1347 * Setup a callback for when a link with the peer is secured. For bonded
rgrover1 716:11b41f651697 1348 * devices, subsequent reconnections with bonded peer will result only in
rgrover1 716:11b41f651697 1349 * this callback when the link is secured and setup procedures will not
rgrover1 716:11b41f651697 1350 * occur unless the bonding information is either lost or deleted on either
rgrover1 716:11b41f651697 1351 * or both sides. The callback is passed in a SecurityManager::SecurityMode_t according
rgrover1 716:11b41f651697 1352 * to the level of security in effect for the secured link.
rgrover1 716:11b41f651697 1353 *
rgrover1 716:11b41f651697 1354 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1355 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1356 * call to ble.onLinkSecured(callback) should be replaced with
rgrover1 716:11b41f651697 1357 * ble.securityManager().onLinkSecured(callback).
rgrover1 716:11b41f651697 1358 */
rgrover1 716:11b41f651697 1359 void onLinkSecured(SecurityManager::LinkSecuredCallback_t callback) {
rgrover1 716:11b41f651697 1360 securityManager().onLinkSecured(callback);
rgrover1 716:11b41f651697 1361 }
rgrover1 716:11b41f651697 1362
rgrover1 716:11b41f651697 1363 /**
rgrover1 716:11b41f651697 1364 * Setup a callback for successful bonding; i.e. that link-specific security
rgrover1 716:11b41f651697 1365 * context is stored persistently for a peer device.
rgrover1 716:11b41f651697 1366 *
rgrover1 716:11b41f651697 1367 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1368 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1369 * call to ble.onSecurityContextStored(callback) should be replaced with
rgrover1 716:11b41f651697 1370 * ble.securityManager().onSecurityContextStored(callback).
rgrover1 716:11b41f651697 1371 */
rgrover1 716:11b41f651697 1372 void onSecurityContextStored(SecurityManager::HandleSpecificEvent_t callback) {
rgrover1 716:11b41f651697 1373 securityManager().onSecurityContextStored(callback);
rgrover1 716:11b41f651697 1374 }
rgrover1 716:11b41f651697 1375
rgrover1 716:11b41f651697 1376 /**
rgrover1 716:11b41f651697 1377 * Setup a callback for when the passkey needs to be displayed on a
rgrover1 716:11b41f651697 1378 * peripheral with DISPLAY capability. This happens when security is
rgrover1 716:11b41f651697 1379 * configured to prevent Man-In-The-Middle attacks, and a PIN (or passkey)
rgrover1 716:11b41f651697 1380 * needs to be exchanged between the peers to authenticate the connection
rgrover1 716:11b41f651697 1381 * attempt.
rgrover1 716:11b41f651697 1382 *
rgrover1 716:11b41f651697 1383 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1384 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1385 * call to ble.onPasskeyDisplay(callback) should be replaced with
rgrover1 716:11b41f651697 1386 * ble.securityManager().onPasskeyDisplay(callback).
rgrover1 716:11b41f651697 1387 */
rgrover1 716:11b41f651697 1388 void onPasskeyDisplay(SecurityManager::PasskeyDisplayCallback_t callback) {
rgrover1 716:11b41f651697 1389 return securityManager().onPasskeyDisplay(callback);
rgrover1 716:11b41f651697 1390 }
rgrover1 716:11b41f651697 1391
rgrover1 716:11b41f651697 1392 private:
rgrover1 806:50c121156a71 1393 BLE(const BLE&);
rgrover1 806:50c121156a71 1394 BLE &operator=(const BLE &);
rgrover1 806:50c121156a71 1395
rgrover1 806:50c121156a71 1396 private:
rgrover1 822:a0f080d1e836 1397 BLEInstanceBase *transport; /* the device specific backend */
rgrover1 716:11b41f651697 1398 };
rgrover1 716:11b41f651697 1399
rgrover1 716:11b41f651697 1400 typedef BLE BLEDevice; /* DEPRECATED. This type alias is retained for the sake of compatibility with older
rgrover1 716:11b41f651697 1401 * code. Will be dropped at some point soon.*/
rgrover1 716:11b41f651697 1402
rgrover1 716:11b41f651697 1403 #endif // ifndef __BLE_H__