Diff: main.cpp

Revision:

23:9e5141647775

Parent:

22:523e316cbe70

Child:

24:a5891669afc5

--- a/main.cpp	Wed Dec 03 05:30:45 2014 +0000
+++ b/main.cpp	Wed Dec 03 06:22:46 2014 +0000
@@ -96,7 +96,7 @@
 DigitalOut led_green(LED_GREEN);
 DigitalOut led_blue(LED_BLUE);
 
-/*
+
 // motor control and angle encoder
 MotorControl motor(PTC2, PTA2, PERIOD, ON_OFF_TIME); // forward, backward, period, safetyPeriod
 AngleEncoder angle_encoder(PTD2, PTD3, PTD1, PTD0, 8, 0, 1000000); // mosi, miso, sclk, cs, bit_width, mode, hz
@@ -104,9 +104,9 @@
 DigitalIn AMT20_B(PTC1); // input for quadrature encoding from angle encoder
 
 // Analog sampling
-Ticker Sampler;
-Timer timer;
-Timer timeStamp;
+//Ticker Sampler;
+//Timer timer;
+//Timer timeStamp;
 AnalogIn A0_pin(A0);
 AnalogIn A2_pin(A2);
 
@@ -130,12 +130,12 @@
 // Important globabl variables necessary for the sampling every interval
 int rotary_count = 0;
 uint32_t last_AMT20_AB_read = 0;
-*/
+
 //using namespace network;
 using namespace std;
  
 int main() {
-    uint32_t sample_array[TOTAL_SAMPLES];
+    
     for(int i = 0; i < TOTAL_SAMPLES; i++) {sample_array[i] = i;}
     led_blue = 1;
     led_green = 1;
@@ -143,20 +143,20 @@
     
     pc.baud(230400);
     pc.printf("Starting Server\r\n");
-    /*
+    
     analog_initialization(A0);
     analog_initialization(A2);
     
     // setup this timer
-    timeStamp.stop();
-    timeStamp.reset();
+    //timeStamp.stop();
+    //timeStamp.reset();
     
     // Start the sampling loop
     current_sample_index = WAITING_TO_BEGIN;
-    Sampler.attach_us(&timed_sampling, SAMPLING_RATE);
-    __disable_irq();    // Disable Interrupts
-    timer.reset();
-    timer.start();        
+    //Sampler.attach_us(&timed_sampling, SAMPLING_RATE);
+    //__disable_irq();    // Disable Interrupts
+    //timer.reset();
+    //timer.start();        
     
     uint32_t trigger_count = 0;
     
@@ -166,7 +166,7 @@
     int32_t pointer = 0;
     
     double duty_cycle = 0.25;
-    */
+    
     // flash red LED
     led_red = 0;
     wait_ms(500);
@@ -187,10 +187,6 @@
     interface.init();
     #endif
     
-    // turn on yellow led
-    led_red = 0;
-    led_green = 0;
-    
     interface.connect();
     pc.printf(NAME);
     pc.printf("IP Address is: %s\n\r", interface.getIPAddress());
@@ -200,7 +196,7 @@
     pc.printf("Port is: %i\n\r", PORT);
     
     // ethernet setup failed for some reason.  Flash yellow light then uC resets itself
-    /*if(interface.getIPAddress() == 0)
+    if(interface.getIPAddress() == 0)
     {
         for(int i = 0; i < 5; i++)
         {
@@ -212,7 +208,7 @@
             wait_ms(1000);
         }
         NVIC_SystemReset();
-    }*/
+    }
     
     network::Select select;
     network::tcp::Socket server;
@@ -239,9 +235,12 @@
     led_red = 1;
     led_green = 1;
     led_blue = 0;
-    wait_ms(1000);
+    wait_ms(500);
     led_blue = 1;
-    
+    wait_ms(200);
+    led_blue = 0;
+    wait_ms(500);
+    led_blue = 1;
     
     do {
         // Wait for activity
@@ -380,10 +379,10 @@
              
     } while (server.getStatus() == network::Socket::Listening);
 }
-/*
+
 void timed_sampling() {
     __disable_irq();    // Disable Interrupts
-    timeStamp.start();
+    //timeStamp.start();
     
     // The following performs analog-to-digital conversions - first reading the last conversion - then initiating another
     uint32_t A0_value = adc_hal_get_conversion_value(0, 0);
@@ -431,10 +430,10 @@
         else { current_sample_index++; }
         }
     
-    int tempVar = timeStamp.read_us();
-    timeStamp.stop();
-    timeStamp.reset();
-    pc.printf("TimeStamp: %i\r\n", tempVar);
+    //int tempVar = timeStamp.read_us();
+    //timeStamp.stop();
+    //timeStamp.reset();
+    //pc.printf("TimeStamp: %i\r\n", tempVar);
     __enable_irq();     // Enable Interrupts
 }
 
@@ -481,4 +480,3 @@
         }
     
 }
-*/
\ No newline at end of file