Arturo Pesaro
cc3100_Socket_Wifi_Server with Ethernet Interface not working
Dependencies: EthernetInterface mbed-rtos mbed
Fork of
cc3100_Test_Demo
by 
David Fletcher
Diff: simplelink/cc3100_netapp.h
- Revision:
- 0:e89ba455dbcf
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/simplelink/cc3100_netapp.h Tue Feb 10 12:09:29 2015 +0000
@@ -0,0 +1,1078 @@
+/*
+ * netapp.h - CC31xx/CC32xx Host Driver Implementation
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the
+ * distribution.
+ *
+ * Neither the name of Texas Instruments Incorporated nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+*/
+
+#ifndef NETAPP_H_
+#define NETAPP_H_
+
+/*****************************************************************************/
+/* Include files */
+/*****************************************************************************/
+
+#include "cc3100_simplelink.h"
+
+#include "cc3100_protocol.h"
+#include "cc3100_nonos.h"
+
+namespace mbed_cc3100 {
+
+/*!
+
+ \addtogroup netapp
+ @{
+
+*/
+
+/*****************************************************************************/
+/* Macro declarations */
+/*****************************************************************************/
+
+/*ERROR code*/
+const int16_t SL_ERROR_NETAPP_RX_BUFFER_LENGTH_ERROR = (-230);
+
+/* Http Server interface */
+const uint8_t MAX_INPUT_STRING = (64); /* because of WPA */
+
+const uint8_t MAX_AUTH_NAME_LEN = (20);
+const uint8_t MAX_AUTH_PASSWORD_LEN = (20);
+const uint8_t MAX_AUTH_REALM_LEN = (20);
+
+const uint8_t MAX_DEVICE_URN_LEN = (15+1);
+const uint8_t MAX_DOMAIN_NAME_LEN = (24+1);
+
+const uint8_t MAX_ACTION_LEN = (30);
+/* Important: in case the max len is changed, make sure the struct sl_NetAppHttpServerSendToken_t in protocol.h is padded correctly! */
+const uint8_t MAX_TOKEN_NAME_LEN = (20);
+const uint8_t MAX_TOKEN_VALUE_LEN = MAX_INPUT_STRING;
+
+const int16_t NETAPP_MAX_SERVICE_TEXT_SIZE = (256);
+const uint8_t NETAPP_MAX_SERVICE_NAME_SIZE = (60);
+const uint8_t NETAPP_MAX_SERVICE_HOST_NAME_SIZE = (64);
+
+
+/* Server Responses */
+const uint8_t SL_NETAPP_RESPONSE_NONE = (0);
+const uint8_t SL_NETAPP_HTTPSETTOKENVALUE = (1);
+
+const uint8_t SL_NETAPP_FAMILY_MASK = (0x80);
+
+/* mDNS types */
+const uint32_t SL_NET_APP_MASK_IPP_TYPE_OF_SERVICE = (0x00000001);
+const uint32_t SL_NET_APP_MASK_DEVICE_INFO_TYPE_OF_SERVICE = (0x00000002);
+const uint32_t SL_NET_APP_MASK_HTTP_TYPE_OF_SERVICE = (0x00000004);
+const uint32_t SL_NET_APP_MASK_HTTPS_TYPE_OF_SERVICE = (0x00000008);
+const uint32_t SL_NET_APP_MASK_WORKSATION_TYPE_OF_SERVICE = (0x00000010);
+const uint32_t SL_NET_APP_MASK_GUID_TYPE_OF_SERVICE = (0x00000020);
+const uint32_t SL_NET_APP_MASK_H323_TYPE_OF_SERVICE = (0x00000040);
+const uint32_t SL_NET_APP_MASK_NTP_TYPE_OF_SERVICE = (0x00000080);
+const uint32_t SL_NET_APP_MASK_OBJECITVE_TYPE_OF_SERVICE = (0x00000100);
+const uint32_t SL_NET_APP_MASK_RDP_TYPE_OF_SERVICE = (0x00000200);
+const uint32_t SL_NET_APP_MASK_REMOTE_TYPE_OF_SERVICE = (0x00000400);
+const uint32_t SL_NET_APP_MASK_RTSP_TYPE_OF_SERVICE = (0x00000800);
+const uint32_t SL_NET_APP_MASK_SIP_TYPE_OF_SERVICE = (0x00001000);
+const uint32_t SL_NET_APP_MASK_SMB_TYPE_OF_SERVICE = (0x00002000);
+const uint32_t SL_NET_APP_MASK_SOAP_TYPE_OF_SERVICE = (0x00004000);
+const uint32_t SL_NET_APP_MASK_SSH_TYPE_OF_SERVICE = (0x00008000);
+const uint32_t SL_NET_APP_MASK_TELNET_TYPE_OF_SERVICE = (0x00010000);
+const uint32_t SL_NET_APP_MASK_TFTP_TYPE_OF_SERVICE = (0x00020000);
+const uint32_t SL_NET_APP_MASK_XMPP_CLIENT_TYPE_OF_SERVICE = (0x00040000);
+const uint32_t SL_NET_APP_MASK_RAOP_TYPE_OF_SERVICE = (0x00080000);
+const uint32_t SL_NET_APP_MASK_ALL_TYPE_OF_SERVICE = (0xFFFFFFFF);
+
+/********************************************************************************************************/
+/* sl_NetAppDnsGetHostByName error codes */
+
+const int16_t SL_NET_APP_DNS_QUERY_NO_RESPONSE = (-159); /* DNS query failed, no response */
+const int16_t SL_NET_APP_DNS_NO_SERVER = (-161); /* No DNS server was specified */
+const int16_t SL_NET_APP_DNS_PARAM_ERROR = (-162); /* mDNS parameters error */
+const int16_t SL_NET_APP_DNS_QUERY_FAILED = (-163); /* DNS query failed; no DNS server sent an 'answer' */
+const int16_t SL_NET_APP_DNS_INTERNAL_1 = (-164);
+const int16_t SL_NET_APP_DNS_INTERNAL_2 = (-165);
+const int16_t SL_NET_APP_DNS_MALFORMED_PACKET = (-166); /* Improperly formed or corrupted DNS packet received */
+const int16_t SL_NET_APP_DNS_INTERNAL_3 = (-167);
+const int16_t SL_NET_APP_DNS_INTERNAL_4 = (-168);
+const int16_t SL_NET_APP_DNS_INTERNAL_5 = (-169);
+const int16_t SL_NET_APP_DNS_INTERNAL_6 = (-170);
+const int16_t SL_NET_APP_DNS_INTERNAL_7 = (-171);
+const int16_t SL_NET_APP_DNS_INTERNAL_8 = (-172);
+const int16_t SL_NET_APP_DNS_INTERNAL_9 = (-173);
+const int16_t SL_NET_APP_DNS_MISMATCHED_RESPONSE = (-174); /* Server response type does not match the query request*/
+const int16_t SL_NET_APP_DNS_INTERNAL_10 = (-175);
+const int16_t SL_NET_APP_DNS_INTERNAL_11 = (-176);
+const int16_t SL_NET_APP_DNS_NO_ANSWER = (-177); /* No response for one-shot query */
+const int16_t SL_NET_APP_DNS_NO_KNOWN_ANSWER = (-178); /* No known answer for query */
+const int16_t SL_NET_APP_DNS_NAME_MISMATCH = (-179); /* Illegal service name according to the RFC */
+const int16_t SL_NET_APP_DNS_NOT_STARTED = (-180); /* mDNS is not running */
+const int16_t SL_NET_APP_DNS_HOST_NAME_ERROR = (-181); /* Host name error. Host name format is not allowed according to RFC 1033,1034,1035, 6763 */
+const int16_t SL_NET_APP_DNS_NO_MORE_ENTRIES = (-182); /* No more entries be found. */
+
+const int16_t SL_NET_APP_DNS_MAX_SERVICES_ERROR = (-200); /* Maximum advertise services are already configured */
+const int16_t SL_NET_APP_DNS_IDENTICAL_SERVICES_ERROR = (-201); /* Trying to register a service that is already exists */
+const int16_t SL_NET_APP_DNS_NOT_EXISTED_SERVICE_ERROR = (-203); /* Trying to delete service that does not existed */
+const int16_t SL_NET_APP_DNS_ERROR_SERVICE_NAME_ERROR = (-204); /* Illegal service name according to the RFC */
+const int16_t SL_NET_APP_DNS_RX_PACKET_ALLOCATION_ERROR = (-205); /* Retry request */
+const int16_t SL_NET_APP_DNS_BUFFER_SIZE_ERROR = (-206); /* List size buffer is bigger than internally allowed in the NWP */
+const int16_t SL_NET_APP_DNS_NET_APP_SET_ERROR = (-207); /* Illegal length of one of the mDNS Set functions */
+const int16_t SL_NET_APP_DNS_GET_SERVICE_LIST_FLAG_ERROR = (-208);
+const int16_t SL_NET_APP_DNS_NO_CONFIGURATION_ERROR = (-209);
+
+/* Set Dev name error codes (NETAPP_SET_GET_DEV_CONF_OPT_DEVICE_URN) */
+const int16_t SL_ERROR_DEVICE_NAME_LEN_ERR = (-117);
+const int16_t SL_ERROR_DEVICE_NAME_INVALID = (-118);
+/* Set domain name error codes (NETAPP_SET_GET_DEV_CONF_OPT_DOMAIN_NAME) */
+const int16_t SL_ERROR_DOMAIN_NAME_LEN_ERR = (-119);
+const int16_t SL_ERROR_DOMAIN_NAME_INVALID = (-120);
+
+/********************************************************************************************************/
+
+/* NetApp application IDs */
+const uint8_t SL_NET_APP_HTTP_SERVER_ID = (1);
+const uint8_t SL_NET_APP_DHCP_SERVER_ID = (2);
+const uint8_t SL_NET_APP_MDNS_ID = (4);
+const uint8_t SL_NET_APP_DNS_SERVER_ID = (8);
+const uint8_t SL_NET_APP_DEVICE_CONFIG_ID = (16);
+/* NetApp application set/get options */
+const uint8_t NETAPP_SET_DHCP_SRV_BASIC_OPT = (0);
+/* HTTP server set/get options */
+const uint8_t NETAPP_SET_GET_HTTP_OPT_PORT_NUMBER = (0);
+const uint8_t NETAPP_SET_GET_HTTP_OPT_AUTH_CHECK = (1);
+const uint8_t NETAPP_SET_GET_HTTP_OPT_AUTH_NAME = (2);
+const uint8_t NETAPP_SET_GET_HTTP_OPT_AUTH_PASSWORD = (3);
+const uint8_t NETAPP_SET_GET_HTTP_OPT_AUTH_REALM = (4);
+const uint8_t NETAPP_SET_GET_HTTP_OPT_ROM_PAGES_ACCESS = (5);
+
+const uint8_t NETAPP_SET_GET_MDNS_CONT_QUERY_OPT = (1);
+const uint8_t NETAPP_SET_GET_MDNS_QEVETN_MASK_OPT = (2);
+const uint8_t NETAPP_SET_GET_MDNS_TIMING_PARAMS_OPT = (3);
+
+/* DNS server set/get options */
+const uint8_t NETAPP_SET_GET_DNS_OPT_DOMAIN_NAME = (0);
+
+/* Device Config set/get options */
+const uint8_t NETAPP_SET_GET_DEV_CONF_OPT_DEVICE_URN = (0);
+const uint8_t NETAPP_SET_GET_DEV_CONF_OPT_DOMAIN_NAME = (1);
+
+
+/*****************************************************************************/
+/* Structure/Enum declarations */
+/*****************************************************************************/
+/*
+ * The below structure depict the constant parameters that are returned in the Async event answer
+ * according to command/API sl_DnsGetHostByService for IPv4 and IPv6.
+ *
+ 1Status - The status of the response.
+ 2.Address - Contains the IP address of the service.
+ 3.Port - Contains the port of the service.
+ 4.TextLen - Contains the max length of the text that the user wants to get.
+ it means that if the test of service is bigger that its value than
+ the text is cut to inout_TextLen value.
+ Output: Contain the length of the text that is returned. Can be full text or part
+ of the text (see above).
+
+*
+ */
+typedef struct {
+ uint16_t Status;
+ uint16_t TextLen;
+ uint32_t Port;
+ uint32_t Address;
+} _GetHostByServiceIPv4AsyncResponse_t;
+
+/*
+ * The below struct contains pointers to the output parameters that the user gives
+ *
+ */
+typedef struct {
+ int16_t Status;
+ uint32_t *out_pAddr;
+ uint32_t *out_pPort;
+ uint16_t *inout_TextLen; // in: max len , out: actual len
+ unsigned char *out_pText;
+} _GetHostByServiceAsyncResponse_t;
+
+typedef struct {
+ uint32_t PacketsSent;
+ uint32_t PacketsReceived;
+ uint16_t MinRoundTime;
+ uint16_t MaxRoundTime;
+ uint16_t AvgRoundTime;
+ uint32_t TestTime;
+} SlPingReport_t;
+
+typedef struct {
+ uint32_t PingIntervalTime; /* delay between pings, in milliseconds */
+ uint16_t PingSize; /* ping packet size in bytes */
+ uint16_t PingRequestTimeout; /* timeout time for every ping in milliseconds */
+ uint32_t TotalNumberOfAttempts; /* max number of ping requests. 0 - forever */
+ uint32_t Flags; /* flag - 0 report only when finished, 1 - return response for every ping, 2 - stop after 1 successful ping. */
+ uint32_t Ip; /* IPv4 address or IPv6 first 4 bytes */
+ uint32_t Ip1OrPaadding;
+ uint32_t Ip2OrPaadding;
+ uint32_t Ip3OrPaadding;
+} SlPingStartCommand_t;
+
+typedef struct _slHttpServerString_t {
+ uint8_t len;
+ uint8_t *data;
+} slHttpServerString_t;
+
+typedef struct _slHttpServerData_t {
+ uint8_t value_len;
+ uint8_t name_len;
+ uint8_t *token_value;
+ uint8_t *token_name;
+} slHttpServerData_t;
+
+typedef struct _slHttpServerPostData_t {
+ slHttpServerString_t action;
+ slHttpServerString_t token_name;
+ slHttpServerString_t token_value;
+} slHttpServerPostData_t;
+
+typedef union {
+ slHttpServerString_t httpTokenName; /* SL_NETAPP_HTTPGETTOKENVALUE */
+ slHttpServerPostData_t httpPostData; /* SL_NETAPP_HTTPPOSTTOKENVALUE */
+} SlHttpServerEventData_u;
+
+typedef union {
+ slHttpServerString_t token_value;
+} SlHttpServerResponsedata_u;
+
+typedef struct {
+ uint32_t Event;
+ SlHttpServerEventData_u EventData;
+} SlHttpServerEvent_t;
+
+typedef struct {
+ uint32_t Response;
+ SlHttpServerResponsedata_u ResponseData;
+} SlHttpServerResponse_t;
+
+
+typedef struct {
+ uint32_t lease_time;
+ uint32_t ipv4_addr_start;
+ uint32_t ipv4_addr_last;
+} SlNetAppDhcpServerBasicOpt_t;
+
+/*mDNS parameters*/
+typedef enum {
+ SL_NET_APP_FULL_SERVICE_WITH_TEXT_IPV4_TYPE = 1,
+ SL_NET_APP_FULL_SERVICE_IPV4_TYPE,
+ SL_NET_APP_SHORT_SERVICE_IPV4_TYPE
+
+} SlNetAppGetServiceListType_e;
+
+typedef struct {
+ uint32_t service_ipv4;
+ uint16_t service_port;
+ uint16_t Reserved;
+} SlNetAppGetShortServiceIpv4List_t;
+
+typedef struct {
+ uint32_t service_ipv4;
+ uint16_t service_port;
+ uint16_t Reserved;
+ uint8_t service_name[NETAPP_MAX_SERVICE_NAME_SIZE];
+ uint8_t service_host[NETAPP_MAX_SERVICE_HOST_NAME_SIZE];
+} SlNetAppGetFullServiceIpv4List_t;
+
+typedef struct {
+ uint32_t service_ipv4;
+ uint16_t service_port;
+ uint16_t Reserved;
+ uint8_t service_name[NETAPP_MAX_SERVICE_NAME_SIZE];
+ uint8_t service_host[NETAPP_MAX_SERVICE_HOST_NAME_SIZE];
+ uint8_t service_text[NETAPP_MAX_SERVICE_TEXT_SIZE];
+} SlNetAppGetFullServiceWithTextIpv4List_t;
+
+typedef struct {
+ /*The below parameters are used to configure the advertise times and interval
+ For example:
+ If:
+ Period is set to T
+ Repetitions are set to P
+ Telescopic factor is K=2
+ The transmission shall be:
+ advertise P times
+ wait T
+ advertise P times
+ wait 4 * T
+ advertise P time
+ wait 16 * T ... (till max time reached / configuration changed / query issued)
+ */
+ uint32_t t; /* Number of ticks for the initial period. Default is 100 ticks for 1 second. */
+ uint32_t p; /* Number of repetitions. Default value is 1 */
+ uint32_t k; /* Telescopic factor. Default value is 2. */
+ uint32_t RetransInterval;/* Announcing retransmission interval */
+ uint32_t Maxinterval; /* Announcing max period interval */
+ uint32_t max_time; /* Announcing max time */
+} SlNetAppServiceAdvertiseTimingParameters_t;
+
+/*****************************************************************************/
+/* Types declarations */
+/*****************************************************************************/
+typedef void (*P_SL_DEV_PING_CALLBACK)(SlPingReport_t*);
+extern P_SL_DEV_PING_CALLBACK pPingCallBackFunc;
+
+/*****************************************************************************************
+* NETAPP structs
+******************************************************************************************/
+
+
+typedef _BasicResponse_t _NetAppStartStopResponse_t;
+
+typedef struct {
+ uint32_t appId;
+} _NetAppStartStopCommand_t;
+
+typedef struct {
+ uint16_t Status;
+ uint16_t AppId;
+ uint16_t ConfigOpt;
+ uint16_t ConfigLen;
+} _NetAppSetGet_t;
+typedef struct {
+ uint16_t port_number;
+} _NetAppHttpServerGetSet_port_num_t;
+
+typedef struct {
+ uint8_t auth_enable;
+} _NetAppHttpServerGetSet_auth_enable_t;
+
+typedef struct _sl_NetAppHttpServerGetToken_t {
+ uint8_t token_name_len;
+ uint8_t padd1;
+ uint16_t padd2;
+} sl_NetAppHttpServerGetToken_t;
+
+typedef struct _sl_NetAppHttpServerSendToken_t {
+ uint8_t token_value_len;
+ uint8_t token_name_len;
+ uint8_t token_name[MAX_TOKEN_NAME_LEN];
+ uint16_t padd;
+} sl_NetAppHttpServerSendToken_t;
+
+typedef struct _sl_NetAppHttpServerPostToken_t {
+ uint8_t post_action_len;
+ uint8_t token_name_len;
+ uint8_t token_value_len;
+ uint8_t padding;
+} sl_NetAppHttpServerPostToken_t;
+
+
+typedef struct {
+ uint16_t Len;
+ uint8_t family;
+ uint8_t padding;
+} _GetHostByNameCommand_t;
+
+typedef struct {
+ uint16_t status;
+ uint16_t padding;
+ uint32_t ip0;
+ uint32_t ip1;
+ uint32_t ip2;
+ uint32_t ip3;
+} _GetHostByNameIPv6AsyncResponse_t;
+
+typedef struct {
+ uint16_t status;
+ uint8_t padding1;
+ uint8_t padding2;
+ uint32_t ip0;
+} _GetHostByNameIPv4AsyncResponse_t;
+
+typedef enum {
+ CTST_BSD_UDP_TX,
+ CTST_BSD_UDP_RX,
+ CTST_BSD_TCP_TX,
+ CTST_BSD_TCP_RX,
+ CTST_BSD_TCP_SERVER_BI_DIR,
+ CTST_BSD_TCP_CLIENT_BI_DIR,
+ CTST_BSD_UDP_BI_DIR,
+ CTST_BSD_RAW_TX,
+ CTST_BSD_RAW_RX,
+ CTST_BSD_RAW_BI_DIR,
+ CTST_BSD_SECURED_TCP_TX,
+ CTST_BSD_SECURED_TCP_RX,
+ CTST_BSD_SECURED_TCP_SERVER_BI_DIR,
+ CTST_BSD_SECURED_TCP_CLIENT_BI_DIR
+} CommTest_e;
+
+typedef struct _sl_protocol_CtestStartCommand_t {
+ uint32_t Test;
+ uint16_t DestPort;
+ uint16_t SrcPort;
+ uint32_t DestAddr[4];
+ uint32_t PayloadSize;
+ uint32_t timeout;
+ uint32_t csEnabled;
+ uint32_t secure;
+ uint32_t rawProtocol;
+ uint8_t reserved1[4];
+} _CtestStartCommand_t;
+
+typedef struct {
+ uint8_t test;
+ uint8_t socket;
+ int16_t status;
+ uint32_t startTime;
+ uint32_t endTime;
+ uint16_t txKbitsSec;
+ uint16_t rxKbitsSec;
+ uint32_t outOfOrderPackets;
+ uint32_t missedPackets;
+} _CtestAsyncResponse_t;
+
+typedef struct {
+ uint32_t pingIntervalTime;
+ uint16_t PingSize;
+ uint16_t pingRequestTimeout;
+ uint32_t totalNumberOfAttempts;
+ uint32_t flags;
+ uint32_t ip0;
+ uint32_t ip1OrPaadding;
+ uint32_t ip2OrPaadding;
+ uint32_t ip3OrPaadding;
+} _PingStartCommand_t;
+
+typedef struct {
+ uint16_t status;
+ uint16_t rttMin;
+ uint16_t rttMax;
+ uint16_t rttAvg;
+ uint32_t numSuccsessPings;
+ uint32_t numSendsPings;
+ uint32_t testTime;
+} _PingReportResponse_t;
+
+
+typedef struct {
+ uint32_t ip;
+ uint32_t gateway;
+ uint32_t dns;
+} _IpV4AcquiredAsync_t;
+
+
+typedef enum {
+ ACQUIRED_IPV6_LOCAL = 1,
+ ACQUIRED_IPV6_GLOBAL
+} IpV6AcquiredType_e;
+
+
+typedef struct {
+ uint32_t type;
+ uint32_t ip[4];
+ uint32_t gateway[4];
+ uint32_t dns[4];
+} _IpV6AcquiredAsync_t;
+
+
+typedef union {
+ _SocketCommand_t EventMask;
+ _sendRecvCommand_t DeviceInit;
+} _device_commands_t;
+
+
+class cc3100_netapp
+{
+
+public:
+
+ cc3100_netapp(cc3100_driver &driver, cc3100_nonos &nonos);
+
+ ~cc3100_netapp();
+
+ /*****************************************************************************/
+ /* Functions prototypes */
+ /*****************************************************************************/
+ int16_t sl_NetAppMDNSRegisterUnregisterService(const char* pServiceName, uint8_t ServiceNameLen, const char* pText, uint8_t TextLen, uint16_t Port, uint32_t TTL, uint32_t Options);
+
+ void _sl_HandleAsync_DnsGetHostByAddr(void *pVoidBuf);
+
+ void CopyPingResultsToReport(_PingReportResponse_t *pResults,SlPingReport_t *pReport);
+
+ uint16_t sl_NetAppSendTokenValue(slHttpServerData_t * Token);
+
+
+ /*****************************************************************************/
+ /* Function prototypes */
+ /*****************************************************************************/
+
+
+ /*!
+ \brief Starts a network application
+
+ Gets and starts network application for the current WLAN mode
+
+ \param[in] AppBitMap application bitmap, could be one or combination of the following: \n
+ - SL_NET_APP_HTTP_SERVER_ID
+ - SL_NET_APP_DHCP_SERVER_ID
+ - SL_NET_APP_MDNS_ID
+
+ \return On error, negative number is returned
+
+ \sa Stop one or more the above started applications using sl_NetAppStop
+ \note This command activates the application for the current WLAN mode (AP or STA)
+ \warning
+ \par Example:
+ \code
+ For example: Starting internal HTTP server + DHCP server:
+ sl_NetAppStart(SL_NET_APP_HTTP_SERVER_ID | SL_NET_APP_DHCP_SERVER_ID)
+
+ \endcode
+ */
+#if _SL_INCLUDE_FUNC(sl_NetAppStart)
+ int16_t sl_NetAppStart(uint32_t AppBitMap);
+#endif
+ /*!
+ \brief Stops a network application
+
+ Gets and stops network application for the current WLAN mode
+
+ \param[in] AppBitMap application id, could be one of the following: \n
+ - SL_NET_APP_HTTP_SERVER_ID
+ - SL_NET_APP_DHCP_SERVER_ID
+ - SL_NET_APP_MDNS_ID
+
+ \return On error, negative number is returned
+
+ \sa
+ \note This command disables the application for the current active WLAN mode (AP or STA)
+ \warning
+ \par Example:
+ \code
+
+ For example: Stopping internal HTTP server:
+ sl_NetAppStop(SL_NET_APP_HTTP_SERVER_ID);
+
+ \endcode
+ */
+#if _SL_INCLUDE_FUNC(sl_NetAppStop)
+ int16_t sl_NetAppStop(uint32_t AppBitMap);
+#endif
+
+ /*!
+ \brief Get host IP by name
+
+ Obtain the IP Address of machine on network, by machine name.
+
+ \param[in] hostname host name
+ \param[in] usNameLen name length
+ \param[out] out_ip_addr This parameter is filled in with
+ host IP address. In case that host name is not
+ resolved, out_ip_addr is zero.
+ \param[in] family protocol family
+
+ \return On success, 0 is returned.
+ On error, negative is returned
+ SL_POOL_IS_EMPTY may be return in case there are no resources in the system
+ In this case try again later or increase MAX_CONCURRENT_ACTIONS
+ Possible DNS error codes:
+ - SL_NET_APP_DNS_QUERY_NO_RESPONSE
+ - SL_NET_APP_DNS_NO_SERVER
+ - SL_NET_APP_DNS_QUERY_FAILED
+ - SL_NET_APP_DNS_MALFORMED_PACKET
+ - SL_NET_APP_DNS_MISMATCHED_RESPONSE
+
+ \sa
+ \note Only one sl_NetAppDnsGetHostByName can be handled at a time.
+ Calling this API while the same command is called from another thread, may result
+ in one of the two scenarios:
+ 1. The command will wait (internal) until the previous command finish, and then be executed.
+ 2. There are not enough resources and POOL_IS_EMPTY error will return.
+ In this case, MAX_CONCURRENT_ACTIONS can be increased (result in memory increase) or try
+ again later to issue the command.
+ \warning
+ \par Example:
+ \code
+ uint32_t DestinationIP;
+ sl_NetAppDnsGetHostByName("www.google.com", strlen("www.google.com"), &DestinationIP,SL_AF_INET);
+
+ Addr.sin_family = SL_AF_INET;
+ Addr.sin_port = sl_Htons(80);
+ Addr.sin_addr.s_addr = sl_Htonl(DestinationIP);
+ AddrSize = sizeof(SlSockAddrIn_t);
+ SockID = sl_Socket(SL_AF_INET,SL_SOCK_STREAM, 0);
+ \endcode
+ */
+#if _SL_INCLUDE_FUNC(sl_NetAppDnsGetHostByName)
+ int16_t sl_NetAppDnsGetHostByName(unsigned char * hostname, uint16_t usNameLen, uint32_t* out_ip_addr,uint8_t family );
+#endif
+
+ /*!
+ \brief Return service attributes like IP address, port and text according to service name
+ \par
+ The user sets a service name Full/Part (see example below), and should get:
+ - IP of service
+ - The port of service
+ - The text of service
+
+ Hence it can make a connection to the specific service and use it.
+ It is similar to get host by name method.
+ It is done by a single shot query with PTR type on the service name.
+ The command that is sent is from constant parameters and variables parameters.
+
+ \param[in] pService Service name can be full or partial. \n
+ Example for full service name:
+ 1. PC1._ipp._tcp.local
+ 2. PC2_server._ftp._tcp.local \n
+ .
+ Example for partial service name:
+ 1. _ipp._tcp.local
+ 2. _ftp._tcp.local
+
+ \param[in] ServiceLen The length of the service name (in_pService).
+ \param[in] Family IPv4 or IPv6 (SL_AF_INET , SL_AF_INET6).
+ \param[out] pAddr Contains the IP address of the service.
+ \param[out] pPort Contains the port of the service.
+ \param[out] pTextLen Has 2 options. One as Input field and the other one as output:
+ - Input: \n
+ Contains the max length of the text that the user wants to get.\n
+ It means that if the text len of service is bigger that its value than
+ the text is cut to inout_TextLen value.
+ - Output: \n
+ Contain the length of the text that is returned. Can be full text or part of the text (see above).
+
+ \param[out] pOut_pText Contains the text of the service full or partial
+
+ \return On success, zero is returned
+ SL_POOL_IS_EMPTY may be return in case there are no resources in the system
+ In this case try again later or increase MAX_CONCURRENT_ACTIONS
+ In case No service is found error SL_NET_APP_DNS_NO_ANSWER will be returned
+
+ \note The returns attributes belongs to the first service found.
+ There may be other services with the same service name that will response to the query.
+ The results of these responses are saved in the peer cache of the Device and should be read by another API.
+
+ Only one sl_NetAppDnsGetHostByService can be handled at a time.
+ Calling this API while the same command is called from another thread, may result
+ in one of the two scenarios:
+ 1. The command will wait (internal) until the previous command finish, and then be executed.
+ 2. There are not enough resources and SL_POOL_IS_EMPTY error will return.
+ In this case, MAX_CONCURRENT_ACTIONS can be increased (result in memory increase) or try
+ again later to issue the command.
+
+ \warning Text length can be 120 bytes only
+ */
+#if _SL_INCLUDE_FUNC(sl_NetAppDnsGetHostByService)
+ int32_t sl_NetAppDnsGetHostByService(unsigned char *pServiceName, /* string containing all (or only part): name + subtype + service */
+ uint8_t ServiceLen,
+ uint8_t Family, /* 4-IPv4 , 16-IPv6 */
+ uint32_t pAddr[],
+ uint32_t *pPort,
+ uint16_t *pTextLen, /* in: max len , out: actual len */
+ unsigned char *pText
+ );
+
+#endif
+
+ /*!
+ \brief Get service List
+ Insert into out pBuffer a list of peer's services that are the NWP.
+ The list is in a form of service struct. The user should chose the type
+ of the service struct like:
+ - Full service parameters with text.
+ - Full service parameters.
+ - Short service parameters (port and IP only) especially for tiny hosts.
+
+ The different types of struct are made to give the
+ Possibility to save memory in the host
+
+
+ The user also chose how many max services to get and start point index
+ NWP peer cache.
+ For example:
+ 1. Get max of 3 full services from index 0.Up to 3 full services
+ from index 0 are inserted into pBuffer (services that are in indexes 0,1,2).
+ 2. Get max of 4 full services from index 3.Up to 4 full services
+ from index 3 are inserted into pBuffer (services that are in indexes 3,4,5,6).
+ 3. Get max of 2 int services from index 6.Up to 2 int services
+ from index 6 are inserted into pBuffer (services that are in indexes 6,7).
+
+ See below - command parameters.
+
+ \param[in] indexOffset - The start index in the peer cache that from it the first service is returned.
+ \param[in] MaxServiceCount - The Max services that can be returned if existed or if not exceed the max index
+ in the peer cache
+ \param[in] Flags - an ENUM number that means which service struct to use (means which types of service to fill)
+ - use SlNetAppGetFullServiceWithTextIpv4List_t
+ - use SlNetAppGetFullServiceIpv4List_t
+ - use SlNetAppGetShortServiceIpv4List_t
+
+ \param[out] Buffer - The Services are inserted into this buffer. In the struct form according to the bit that is set in the Flags
+ input parameter.
+
+ \return ServiceFoundCount - The number of the services that were inserted into the buffer. zero means no service is found
+ negative number means an error
+ \sa sl_NetAppMDNSRegisterService
+ \note
+ \warning
+ if the out pBuffer size is bigger than an RX packet(1480), than
+ an error is returned because there
+ is no place in the RX packet.
+ The size is a multiply of MaxServiceCount and size of service struct(that is set
+ according to flag value).
+ */
+
+#if _SL_INCLUDE_FUNC(sl_NetAppGetServiceList)
+ int16_t sl_NetAppGetServiceList(uint8_t IndexOffest,
+ uint8_t MaxServiceCount,
+ uint8_t Flags,
+ int8_t *pBuffer,
+ uint32_t RxBufferLength
+ );
+
+#endif
+
+ /*!
+ \brief Unregister mDNS service
+ This function deletes the mDNS service from the mDNS package and the database.
+
+ The mDNS service that is to be unregistered is a service that the application no longer wishes to provide. \n
+ The service name should be the full service name according to RFC
+ of the DNS-SD - meaning the value in name field in the SRV answer.
+
+ Examples for service names:
+ 1. PC1._ipp._tcp.local
+ 2. PC2_server._ftp._tcp.local
+
+ \param[in] pServiceName Full service name. \n
+ Example for service name:
+ 1. PC1._ipp._tcp.local
+ 2. PC2_server._ftp._tcp.local
+ \param[in] ServiceLen The length of the service.
+ \return On success, zero is returned
+ \sa sl_NetAppMDNSRegisterService
+ \note
+ \warning
+ The size of the service length should be smaller than 255.
+ */
+#if _SL_INCLUDE_FUNC(sl_NetAppMDNSUnRegisterService)
+ int16_t sl_NetAppMDNSUnRegisterService(const char *pServiceName,uint8_t ServiceNameLen);
+#endif
+
+ /*!
+ \brief Register a new mDNS service
+ \par
+ This function registers a new mDNS service to the mDNS package and the DB.
+
+ This registered service is a service offered by the application.
+ The service name should be full service name according to RFC
+ of the DNS-SD - meaning the value in name field in the SRV answer.
+ Example for service name:
+ 1. PC1._ipp._tcp.local
+ 2. PC2_server._ftp._tcp.local
+
+ If the option is_unique is set, mDNS probes the service name to make sure
+ it is unique before starting to announce the service on the network.
+ Instance is the instance portion of the service name.
+
+ \param[in] ServiceLen The length of the service.
+ \param[in] TextLen The length of the service should be smaller than 64.
+ \param[in] port The port on this target host port.
+ \param[in] TTL The TTL of the service
+ \param[in] Options bitwise parameters: \n
+ - bit 0 - service is unique (means that the service needs to be unique)
+ - bit 31 - for internal use if the service should be added or deleted (set means ADD).
+ - bit 1-30 for future.
+
+ \param[in] pServiceName The service name.
+ Example for service name: \n
+ 1. PC1._ipp._tcp.local
+ 2. PC2_server._ftp._tcp.local
+
+ \param[in] pText The description of the service.
+ should be as mentioned in the RFC
+ (according to type of the service IPP,FTP...)
+
+ \return On success, zero is returned
+ Possible error codes:
+ - Maximum advertise services are already configured.
+ Delete another existed service that is registered and then register again the new service
+ - Trying to register a service that is already exists
+ - Trying to delete service that does not existed
+ - Illegal service name according to the RFC
+ - Retry request
+ - Illegal length of one of the mDNS Set functions
+ - mDNS is not operational as the device has no IP.Connect the device to an AP to get an IP address.
+ - mDNS parameters error
+ - mDNS internal cache error
+ - mDNS internal error
+ - Adding a service is not allowed as it is already exist (duplicate service)
+ - mDNS is not running
+ - Host name error. Host name format is not allowed according to RFC 1033,1034,1035, 6763
+ - List size buffer is bigger than internally allowed in the NWP (API get service list),
+ change the APIs� parameters to decrease the size of the list
+
+
+ \sa sl_NetAppMDNSUnRegisterService
+
+ \warning 1) Temporary - there is an allocation on stack of internal buffer.
+ Its size is NETAPP_MDNS_MAX_SERVICE_NAME_AND_TEXT_LENGTH. \n
+ It means that the sum of the text length and service name length cannot be bigger than
+ NETAPP_MDNS_MAX_SERVICE_NAME_AND_TEXT_LENGTH.\n
+ If it is - An error is returned. \n
+ 2) According to now from certain constraints the variables parameters are set in the
+ attribute part (contain constant parameters)
+ */
+#if _SL_INCLUDE_FUNC(sl_NetAppMDNSRegisterService)
+ int16_t sl_NetAppMDNSRegisterService( const char* pServiceName,
+ uint8_t ServiceNameLen,
+ const char* pText,
+ uint8_t TextLen,
+ uint16_t Port,
+ uint32_t TTL,
+ uint32_t Options);
+#endif
+
+ /*!
+ \brief send ICMP ECHO_REQUEST to network hosts
+
+ Ping uses the ICMP protocol's mandatory ECHO_REQUEST
+
+ \param[in] pPingParams Pointer to the ping request structure: \n
+ - if flags parameter is set to 0, ping will report back once all requested pings are done (as defined by TotalNumberOfAttempts). \n
+ - if flags parameter is set to 1, ping will report back after every ping, for TotalNumberOfAttempts.
+ - if flags parameter is set to 2, ping will stop after the first successful ping, and report back for the successful ping, as well as any preceding failed ones.
+ For stopping an ongoing ping activity, set parameters IP address to 0
+
+ \param[in] family SL_AF_INET or SL_AF_INET6
+ \param[out] pReport Ping pReport
+ \param[out] pCallback Callback function upon completion.
+ If callback is NULL, the API is blocked until data arrives
+
+
+ \return On success, zero is returned. On error, -1 is returned
+ SL_POOL_IS_EMPTY may be return in case there are no resources in the system
+ In this case try again later or increase MAX_CONCURRENT_ACTIONS
+
+ \sa sl_NetAppPingReport
+ \note Only one sl_NetAppPingStart can be handled at a time.
+ Calling this API while the same command is called from another thread, may result
+ in one of the two scenarios:
+ 1. The command will wait (internal) until the previous command finish, and then be executed.
+ 2. There are not enough resources and SL_POOL_IS_EMPTY error will return.
+ In this case, MAX_CONCURRENT_ACTIONS can be increased (result in memory increase) or try
+ again later to issue the command.
+ \warning
+ \par Example:
+ \code
+
+ An example of sending 20 ping requests and reporting results to a callback routine when
+ all requests are sent:
+
+ // callback routine
+ void pingRes(SlPingReport_t* pReport)
+ {
+ // handle ping results
+ }
+
+ // ping activation
+ void PingTest()
+ {
+ SlPingReport_t report;
+ SlPingStartCommand_t pingCommand;
+
+ pingCommand.Ip = SL_IPV4_VAL(10,1,1,200); // destination IP address is 10.1.1.200
+ pingCommand.PingSize = 150; // size of ping, in bytes
+ pingCommand.PingIntervalTime = 100; // delay between pings, in milliseconds
+ pingCommand.PingRequestTimeout = 1000; // timeout for every ping in milliseconds
+ pingCommand.TotalNumberOfAttempts = 20; // max number of ping requests. 0 - forever
+ pingCommand.Flags = 0; // report only when finished
+
+ sl_NetAppPingStart( &pingCommand, SL_AF_INET, &report, pingRes ) ;
+ }
+
+ \endcode
+ */
+#if _SL_INCLUDE_FUNC(sl_NetAppPingStart)
+ int16_t sl_NetAppPingStart(SlPingStartCommand_t* pPingParams,uint8_t family,SlPingReport_t *pReport,const P_SL_DEV_PING_CALLBACK pPingCallback);
+#endif
+
+ /*!
+ \brief Internal function for setting network application configurations
+
+ \return On success, zero is returned. On error, -1 is
+ returned
+
+ \param[in] AppId Application id, could be one of the following: \n
+ - SL_NET_APP_HTTP_SERVER_ID
+ - SL_NET_APP_DHCP_SERVER_ID
+ - SL_NET_APP_DHCP_SERVER_ID
+
+ \param[in] SetOptions set option, could be one of the following: \n
+ NETAPP_SET_BASIC_OPT
+
+ \param[in] OptionLen option structure length
+
+ \param[in] pOptionValues pointer to the option structure
+ \sa
+ \note
+ \warning
+ \par
+ \code
+ Set DHCP Server (AP mode) parameters example:
+
+ SlNetAppDhcpServerBasicOpt_t dhcpParams;
+ uint8_t outLen = sizeof(SlNetAppDhcpServerBasicOpt_t);
+ dhcpParams.lease_time = 4096; // lease time (in seconds) of the IP Address
+ dhcpParams.ipv4_addr_start = SL_IPV4_VAL(192,168,1,10); // first IP Address for allocation. IP Address should be set as Hex number - i.e. 0A0B0C01 for (10.11.12.1)
+ dhcpParams.ipv4_addr_last = SL_IPV4_VAL(192,168,1,16); // last IP Address for allocation. IP Address should be set as Hex number - i.e. 0A0B0C01 for (10.11.12.1)
+ sl_NetAppStop(SL_NET_APP_DHCP_SERVER_ID); // Stop DHCP server before settings
+ sl_NetAppSet(SL_NET_APP_DHCP_SERVER_ID, NETAPP_SET_DHCP_SRV_BASIC_OPT, outLen, (uint8_t* )&dhcpParams); // set parameters
+ sl_NetAppStart(SL_NET_APP_DHCP_SERVER_ID); // Start DHCP server with new settings
+ \endcode
+ \code
+ Set Device URN name example:
+
+ Device name, maximum length of 33 characters
+ Device name affects URN name, own SSID name in AP mode, and WPS file "device name" in WPS I.E (STA-WPS / P2P)
+ In case no device URN name set, the default name is "mysimplelink"
+ Allowed characters in device name are: 'a - z' , 'A - Z' , '0-9' and '-'
+
+ uint8_t *my_device = "MY-SIMPLELINK-DEV";
+ sl_NetAppSet (SL_NET_APP_DEVICE_CONFIG_ID, NETAPP_SET_GET_DEV_CONF_OPT_DEVICE_URN, strlen(my_device), (uint8_t *) my_device);
+ \endcode
+
+ */
+#if _SL_INCLUDE_FUNC(sl_NetAppSet)
+ int32_t sl_NetAppSet(uint8_t AppId ,uint8_t Option,uint8_t OptionLen, uint8_t *pOptionValue);
+#endif
+
+ /*!
+ \brief Internal function for getting network applications configurations
+
+ \return On success, zero is returned. On error, -1 is
+ returned
+
+ \param[in] AppId Application id, could be one of the following: \n
+ - SL_NET_APP_HTTP_SERVER_ID
+ - SL_NET_APP_DHCP_SERVER_ID
+
+ \param[in] Options Get option, could be one of the following: \n
+ NETAPP_SET_BASIC_OPT
+
+ \param[in] OptionLen The length of the allocated memory as input, when the
+ function complete, the value of this parameter would be
+ the len that actually read from the device.
+ If the device return length that is longer from the input
+ value, the function will cut the end of the returned structure
+ and will return ESMALLBUF
+
+ \param[out] pValues pointer to the option structure which will be filled with the response from the device
+
+ \sa
+ \note
+ \warning
+ \par
+ \code
+ Get DHCP Server parameters example:
+
+ SlNetAppDhcpServerBasicOpt_t dhcpParams;
+ uint8_t outLen = sizeof(SlNetAppDhcpServerBasicOpt_t);
+ sl_NetAppGet(SL_NET_APP_DHCP_SERVER_ID, NETAPP_SET_DHCP_SRV_BASIC_OPT, &outLen, (uint8_t* )&dhcpParams);
+
+ printf("DHCP Start IP %d.%d.%d.%d End IP %d.%d.%d.%d Lease time seconds %d\n",
+ SL_IPV4_BYTE(dhcpParams.ipv4_addr_start,3),SL_IPV4_BYTE(dhcpParams.ipv4_addr_start,2),
+ SL_IPV4_BYTE(dhcpParams.ipv4_addr_start,1),SL_IPV4_BYTE(dhcpParams.ipv4_addr_start,0),
+ SL_IPV4_BYTE(dhcpParams.ipv4_addr_last,3),SL_IPV4_BYTE(dhcpParams.ipv4_addr_last,2),
+ SL_IPV4_BYTE(dhcpParams.ipv4_addr_last,1),SL_IPV4_BYTE(dhcpParams.ipv4_addr_last,0),
+ dhcpParams.lease_time);
+ \endcode
+ \code
+ Get Device URN name example:
+ Maximum length of 33 characters of device name.
+ Device name affects URN name, own SSID name in AP mode, and WPS file "device name" in WPS I.E (STA-WPS / P2P)
+ in case no device URN name set, the default name is "mysimplelink"
+
+ uint8_t my_device_name[35];
+ sl_NetAppGet (SL_NET_APP_DEVICE_CONFIG_ID, NETAPP_SET_GET_DEV_CONF_OPT_DEVICE_URN, strlen(my_device_name), (uint8_t *)my_device_name);
+ \endcode
+ */
+#if _SL_INCLUDE_FUNC(sl_NetAppGet)
+ int32_t sl_NetAppGet(uint8_t AppId, uint8_t Option,uint8_t *pOptionLen, uint8_t *pOptionValue);
+#endif
+
+private:
+
+ cc3100_driver &_driver;
+ cc3100_nonos &_nonos;
+
+
+};//class
+
+/*****************************************************************************/
+/* Macro declarations */
+/*****************************************************************************/
+const uint8_t FLOW_CONT_MIN = 1;
+
+
+class cc3100_flowcont
+{
+
+public:
+
+ cc3100_flowcont(cc3100_driver &driver, cc3100_nonos &nonos);
+
+
+ ~cc3100_flowcont();
+
+
+ /*****************************************************************************/
+ /* Function prototypes */
+ /*****************************************************************************/
+ void _SlDrvFlowContInit(void);
+ void _SlDrvFlowContDeinit(void);
+
+private:
+
+ cc3100_driver &_driver;
+ cc3100_nonos &_nonos;
+
+};//class
+}//namespace mbed_cc3100
+
+/*!
+
+ Close the Doxygen group.
+ @}
+
+ */
+
+#endif /* __NETAPP_H__ */
+
+
Repository toolbox
| Export to desktop IDE |
| Build repository |
Repository details
| Type: | Program |
|---|---|
| Mbed OS support: | Mbed 2 deprecated |
| Created: | 26 May 2017 |
| Imports: | 0 |
| Forks: | 0 |
| Commits: | 10 |
| Dependents: | 0 |
| Dependencies: | 3 |
| Followers: | 2 |
