Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.
Dependents: DISCO_IOT-wifi_client
Fork of stm-spirit1-rf-driver by
Diff: README.md
- Revision:
- 50:7f70089ba05f
- Child:
- 54:0f6612d36a29
diff -r d017830c0c67 -r 7f70089ba05f README.md --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/README.md Tue Feb 14 13:41:25 2017 +0100 @@ -0,0 +1,13 @@ +# Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 Module for STM32 Nucleo # + +Currently supported boards: + * [X-NUCLEO-IDS01A4](http://www.st.com/content/st_com/en/products/ecosystems/stm32-open-development-environment/stm32-nucleo-expansion-boards/stm32-ode-connect-hw/x-nucleo-ids01a4.html) + +**Note**, in order to use expansion board `X-NUCLEO-IDS01A4` in mbed you need to perform the following HW modifications on the board: + * **Un**mount resistor `R4` + * **Mount** resistor `R7` + +Furthermore, on some Nucleo development boards (e.g. the [NUCLEO_F429ZI](https://developer.mbed.org/platforms/ST-Nucleo-F429ZI/)), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro `PB5_ETH_PATCH` defined! + +This driver is used with 6LoWPAN stack. +