Diff: README.md

Revision:

50:7f70089ba05f

Child:

54:0f6612d36a29

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/README.md	Tue Feb 14 13:41:25 2017 +0100
@@ -0,0 +1,13 @@
+# Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 Module for STM32 Nucleo #
+
+Currently supported boards:
+ * [X-NUCLEO-IDS01A4](http://www.st.com/content/st_com/en/products/ecosystems/stm32-open-development-environment/stm32-nucleo-expansion-boards/stm32-ode-connect-hw/x-nucleo-ids01a4.html)
+
+**Note**, in order to use expansion board `X-NUCLEO-IDS01A4` in mbed you need to perform the following HW modifications on the board:
+ * **Un**mount resistor `R4`
+ * **Mount** resistor `R7`
+ 
+Furthermore, on some Nucleo development boards (e.g. the [NUCLEO_F429ZI](https://developer.mbed.org/platforms/ST-Nucleo-F429ZI/)), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro `PB5_ETH_PATCH` defined!
+
+This driver is used with 6LoWPAN stack.
+