add "LE Device Address" 0x1B to advertising data types
Fork of BLE_API by
ble/GattCallbackParamTypes.h
- Committer:
- rgrover1
- Date:
- 2015-11-26
- Revision:
- 907:f9a79127973a
- Parent:
- 906:8ddab3271c2f
- Child:
- 912:f728aa46e7df
File content as of revision 907:f9a79127973a:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef __GATT_CALLBACK_PARAM_TYPES_H__ #define __GATT_CALLBACK_PARAM_TYPES_H__ struct GattWriteCallbackParams { enum WriteOp_t { OP_INVALID = 0x00, /**< Invalid operation. */ OP_WRITE_REQ = 0x01, /**< Write request. */ OP_WRITE_CMD = 0x02, /**< Write command. */ OP_SIGN_WRITE_CMD = 0x03, /**< Signed write command. */ OP_PREP_WRITE_REQ = 0x04, /**< Prepare write request. */ OP_EXEC_WRITE_REQ_CANCEL = 0x05, /**< Execute write request: cancel all prepared writes. */ OP_EXEC_WRITE_REQ_NOW = 0x06, /**< Execute write request: immediately execute all prepared writes. */ }; Gap::Handle_t connHandle; GattAttribute::Handle_t handle; WriteOp_t writeOp; /**< Type of write operation. */ uint16_t offset; /**< Offset for the write operation. */ uint16_t len; const uint8_t *data; /* @note: Data might not persist beyond the callback; make a local copy if needed. */ }; struct GattReadCallbackParams { Gap::Handle_t connHandle; GattAttribute::Handle_t handle; uint16_t offset; /**< Offset for the read operation. */ uint16_t len; const uint8_t *data; /* @note: Data might not persist beyond the callback; make a local copy if needed. */ }; enum GattAuthCallbackReply_t { AUTH_CALLBACK_REPLY_SUCCESS = 0x00, /**< Success. */ AUTH_CALLBACK_REPLY_ATTERR_INVALID_HANDLE = 0x0101, /**< ATT Error: Invalid attribute handle. */ AUTH_CALLBACK_REPLY_ATTERR_READ_NOT_PERMITTED = 0x0102, /**< ATT Error: Read not permitted. */ AUTH_CALLBACK_REPLY_ATTERR_WRITE_NOT_PERMITTED = 0x0103, /**< ATT Error: Write not permitted. */ AUTH_CALLBACK_REPLY_ATTERR_INSUF_AUTHENTICATION = 0x0105, /**< ATT Error: Authenticated link required. */ AUTH_CALLBACK_REPLY_ATTERR_INVALID_OFFSET = 0x0107, /**< ATT Error: The specified offset was past the end of the attribute. */ AUTH_CALLBACK_REPLY_ATTERR_INSUF_AUTHORIZATION = 0x0108, /**< ATT Error: Used in ATT as "insufficient authorization". */ AUTH_CALLBACK_REPLY_ATTERR_PREPARE_QUEUE_FULL = 0x0109, /**< ATT Error: Used in ATT as "prepare queue full". */ AUTH_CALLBACK_REPLY_ATTERR_ATTRIBUTE_NOT_FOUND = 0x010A, /**< ATT Error: Used in ATT as "attribute not found". */ AUTH_CALLBACK_REPLY_ATTERR_ATTRIBUTE_NOT_LONG = 0x010B, /**< ATT Error: Attribute cannot be read or written using read/write blob requests. */ AUTH_CALLBACK_REPLY_ATTERR_INVALID_ATT_VAL_LENGTH = 0x010D, /**< ATT Error: Invalid value size. */ AUTH_CALLBACK_REPLY_ATTERR_INSUF_RESOURCES = 0x0111, /**< ATT Error: Encrypted link required. */ }; struct GattWriteAuthCallbackParams { Gap::Handle_t connHandle; GattAttribute::Handle_t handle; uint16_t offset; /**< Offset for the write operation. */ uint16_t len; /**< Length of the incoming data. */ const uint8_t *data; /**< Incoming data, variable length. */ GattAuthCallbackReply_t authorizationReply; /* This is the out parameter that the callback * needs to set to AUTH_CALLBACK_REPLY_SUCCESS * for the request to proceed. */ }; struct GattReadAuthCallbackParams { Gap::Handle_t connHandle; GattAttribute::Handle_t handle; uint16_t offset; /**< Offset for the read operation. */ uint16_t len; /**< Optional: new length of the outgoing data. */ uint8_t *data; /**< Optional: new outgoing data. Leave at NULL if data is unchanged. */ GattAuthCallbackReply_t authorizationReply; /* This is the out parameter that the callback * needs to set to AUTH_CALLBACK_REPLY_SUCCESS * for the request to proceed. */ }; /* For encapsulating handle-value update events (notifications or indications) generated at the remote server. */ struct GattHVXCallbackParams { Gap::Handle_t connHandle; GattAttribute::Handle_t handle; /**< Attribute Handle to which the HVx operation applies. */ HVXType_t type; /**< Indication or Notification, see @ref HVXType_t. */ uint16_t len; /**< Attribute data length. */ const uint8_t *data; /**< Attribute data, variable length. */ }; #endif /*__GATT_CALLBACK_PARAM_TYPES_H__*/