File content as of revision 906:8ddab3271c2f:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef __GATT_CALLBACK_PARAM_TYPES_H__
#define __GATT_CALLBACK_PARAM_TYPES_H__

struct GattWriteCallbackParams {
    enum WriteOp_t {
        OP_INVALID               = 0x00,  /**< Invalid Operation. */
        OP_WRITE_REQ             = 0x01,  /**< Write Request. */
        OP_WRITE_CMD             = 0x02,  /**< Write Command. */
        OP_SIGN_WRITE_CMD        = 0x03,  /**< Signed Write Command. */
        OP_PREP_WRITE_REQ        = 0x04,  /**< Prepare Write Request. */
        OP_EXEC_WRITE_REQ_CANCEL = 0x05,  /**< Execute Write Request: Cancel all prepared writes. */
        OP_EXEC_WRITE_REQ_NOW    = 0x06,  /**< Execute Write Request: Immediately execute all prepared writes. */
    };

    Gap::Handle_t            connHandle;
    GattAttribute::Handle_t  handle;
    WriteOp_t                writeOp; /**< Type of write operation, */
    uint16_t                 offset;  /**< Offset for the write operation. */
    uint16_t                 len;
    const uint8_t           *data;    /* @note: data might not persist beyond the callback; make a local copy if needed. */
};

struct GattReadCallbackParams {
    Gap::Handle_t            connHandle;
    GattAttribute::Handle_t  handle;
    uint16_t                 offset;  /**< Offset for the read operation. */
    uint16_t                 len;
    const uint8_t           *data;    /* @note: data might not persist beyond the callback; make a local copy if needed. */
};

enum GattAuthCallbackReply_t {
    AUTH_CALLBACK_REPLY_SUCCESS                       = 0x00,    /**< Success. */
    AUTH_CALLBACK_REPLY_ATTERR_INVALID_HANDLE         = 0x0101,  /**< ATT Error: Invalid Attribute Handle. */
    AUTH_CALLBACK_REPLY_ATTERR_READ_NOT_PERMITTED     = 0x0102,  /**< ATT Error: Read not permitted. */
    AUTH_CALLBACK_REPLY_ATTERR_WRITE_NOT_PERMITTED    = 0x0103,  /**< ATT Error: Write not permitted. */
    AUTH_CALLBACK_REPLY_ATTERR_INSUF_AUTHENTICATION   = 0x0105,  /**< ATT Error: Authenticated link required. */
    AUTH_CALLBACK_REPLY_ATTERR_INVALID_OFFSET         = 0x0107,  /**< ATT Error: Offset specified was past the end of the attribute. */
    AUTH_CALLBACK_REPLY_ATTERR_INSUF_AUTHORIZATION    = 0x0108,  /**< ATT Error: Used in ATT as Insufficient Authorisation. */
    AUTH_CALLBACK_REPLY_ATTERR_PREPARE_QUEUE_FULL     = 0x0109,  /**< ATT Error: Used in ATT as Prepare Queue Full. */
    AUTH_CALLBACK_REPLY_ATTERR_ATTRIBUTE_NOT_FOUND    = 0x010A,  /**< ATT Error: Used in ATT as Attribute not found. */
    AUTH_CALLBACK_REPLY_ATTERR_ATTRIBUTE_NOT_LONG     = 0x010B,  /**< ATT Error: Attribute cannot be read or written using read/write blob requests. */
    AUTH_CALLBACK_REPLY_ATTERR_INVALID_ATT_VAL_LENGTH = 0x010D,  /**< ATT Error: Invalid value size. */
    AUTH_CALLBACK_REPLY_ATTERR_INSUF_RESOURCES        = 0x0111,  /**< ATT Error: Encrypted link required. */
};

struct GattWriteAuthCallbackParams {
    Gap::Handle_t            connHandle;
    GattAttribute::Handle_t  handle;
    uint16_t                 offset; /**< Offset for the write operation. */
    uint16_t                 len;    /**< Length of the incoming data. */
    const uint8_t           *data;   /**< Incoming data, variable length. */
    GattAuthCallbackReply_t  authorizationReply; /* This is the out parameter which needs to be set to
                                                  * AUTH_CALLBACK_REPLY_SUCCESS by the callback if the
                                                  * request is to proceed. */
};

struct GattReadAuthCallbackParams {
    Gap::Handle_t            connHandle;
    GattAttribute::Handle_t  handle;
    uint16_t                 offset; /**< Offset for the read operation. */
    uint16_t                 len;    /**< Optional: new length of the outgoing data. */
    uint8_t                 *data;   /**< Optional: new outgoing data. Leave at NULL if data is unchanged. */
    GattAuthCallbackReply_t  authorizationReply; /* This is the out parameter which needs to be set to
                                                  * AUTH_CALLBACK_REPLY_SUCCESS by the callback if the
                                                  * request is to proceed. */
};

/* For encapsulating handle-value update events (notifications or indications) generated at the remote server. */
struct GattHVXCallbackParams {
  Gap::Handle_t            connHandle;
  GattAttribute::Handle_t  handle; /**< Attribute Handle to which the HVx operation applies. */
  HVXType_t                type;   /**< Indication or Notification, see @ref HVXType_t. */
  uint16_t                 len;    /**< Attribute data length. */
  const uint8_t           *data;   /**< Attribute data, variable length. */
};

#endif /*__GATT_CALLBACK_PARAM_TYPES_H__*/