Adding ability to set priority of the Rx thread
Dependencies: ublox-at-cellular-interface
Fork of ublox-at-cellular-interface-ext by
Diff: UbloxATCellularInterfaceExt.h
- Revision:
- 11:3631f62bb359
- Parent:
- 5:9fd89567f769
- Child:
- 15:6f0a1ecc8cec
--- a/UbloxATCellularInterfaceExt.h Tue Jun 13 10:46:08 2017 +0100 +++ b/UbloxATCellularInterfaceExt.h Fri Jun 16 00:55:19 2017 +0100 @@ -157,7 +157,8 @@ * HTTP_AUTH_TYPE "0" for no authentication, "1" for username/password * authentication (the default is 0) * HTTP_SERVER_PORT "81" (default is port 80) - * HTTP_SECURE "0" for no security, "1" for TLS (the default is 0) + * HTTP_SECURE "0" for no security, "1" for TLS (the default is 0), + * not all modems support this parameter * * @param httpProfile the HTTP profile identifier. * @param httpOpCode the HTTP operation code. @@ -257,10 +258,8 @@ bool ftpSetTimeout(int timeout); /** Reset the FTP configuration back to defaults. - * - * @return true if successful, false otherwise. */ - bool ftpResetPar(); + void ftpResetPar(); /** Set FTP parameters. * @@ -295,19 +294,19 @@ * See section 27.2 of u-blox-ATCommands_Manual(UBX-13002752).pdf * for full details. By example, it works like this: * - * ftpCmd file1 file2 offset buf len - * FTP_LOGOUT N/A N/A N/A N/A N/A - * FTP_LOGIN N/A N/A N/A N/A N/A - * FTP_DELETE_FILE "the_file" N/A N/A N/A N/A - * FTP_RENAME_FILE "old_name" "new_name" N/A N/A N/A - * FTP_GET_FILE "the_file" Note 1 0 - 65535 N/A N/A (Notes 2) - * FTP_PUT_FILE "the_file" Note 1 0 - 65535 N/A N/A (Note 2) - * FTP_CD "dir1\dir2" N/A N/A N/A N/A - * FTP_MKDIR "newdir" N/A N/A N/A N/A - * FTP_RMDIR "dir" N/A N/A N/A N/A - * FTP_FILE_INFO "the_path" N/A N/A Note 3 - * FTP_LS "the_path" N/A N/A Note 3 - * FTP_FOTA_FILE "the_file" N/A N/A Note 4 + * ftpCmd file1 file2 buf len offset + * FTP_LOGOUT N/A N/A N/A N/A N/A + * FTP_LOGIN N/A N/A N/A N/A N/A + * FTP_DELETE_FILE "the_file" N/A N/A N/A N/A + * FTP_RENAME_FILE "old_name" "new_name" N/A N/A N/A + * FTP_GET_FILE "the_file" Note 1 N/A N/A 0 - 1 (Notes 2 & 3) + * FTP_PUT_FILE "the_file" Note 1 N/A N/A 0 - 65535 (Notes 2 & 4 & 5) + * FTP_CD "dir1\dir2" N/A N/A N/A N/A + * FTP_MKDIR "newdir" N/A N/A N/A N/A + * FTP_RMDIR "dir" N/A N/A N/A N/A + * FTP_FILE_INFO "the_path" N/A Note 6 N/A + * FTP_LS "the_path" N/A Note 6 N/A + * FTP_FOTA_FILE "the_file" N/A Note 7 N/A * * Note 1: for this case, file2 is the name that the file should be * given when it arrives (in the modem file system for a GET, at the FTP @@ -315,30 +314,37 @@ * Note 2: the file will placed into the modem file system for the * GET case (and can be read with readFile()), or must already be in the * modem file system, (can be written using writeFile()) for the PUT case. - * Note 3: buf should point to the location where the file info + * Note 3: if offset is 1 then, where supported, the FTP GET + * will be continued from the point it previously stopped. + * Note 4: if the file already exists in the modem file system some + * modems will return an error. It is up to the caller to ensure that + * the file does not exist before the FTP PUT operation. + * Note 5: where supported, offset is the position in the file to continue + * the FTP PUT from. + * Note 6: buf should point to the location where the file info * or directory listing is to be stored and len should be the maximum * length that can be stored. - * Note 4: a hex string representing the MD5 sum of the FOTA file will be + * Note 7: a hex string representing the MD5 sum of the FOTA file will be * stored at buf; len must be at least 32 as an MD5 sum is 16 bytes. * FTP_FOTA_FILE is not supported on SARA-U2. - * Note 5: FTP_GET_DIRECT and FTP_PUT_DIRECT are not supported by + * Note 8: FTP_GET_DIRECT and FTP_PUT_DIRECT are not supported by * this driver. * * @param ftpCmd the FTP command. * @param file1 the first file name if required (NULL otherwise). * @param file2 the second file name if required (NULL otherwise). - * @param offset the offset (in bytes) at which to begin the get - * or put operation within the file. * @param buf pointer to a buffer, required for FTP_DIRECT mode * and FTP_LS only. * @param len the size of buf. + * @param continue if true then attempt to continue a download that + * was previously interrupted. * @return NULL if successful, otherwise a pointer to * a Error struct containing the error class and error * code, see section Appendix A.B of * u-blox-ATCommands_Manual(UBX-13002752).pdf for details. */ Error *ftpCommand(FtpCmd ftpCmd, const char* file1 = NULL, const char* file2 = NULL, - int offset = 0, char* buf = NULL, int len = 0); + char* buf = NULL, int len = 0, int offset = 0); /********************************************************************** * PUBLIC: Cell Locate