Vybhav Kadaba
Minor changes to support ADMW FWv1.17.75
Diff: inc/admw1001/ADMW1001_REGISTERS.h
- Revision:
- 43:e1789b7214cf
- Parent:
- 36:54e2418e7620
- Child:
- 44:94bdfaefddac
--- a/inc/admw1001/ADMW1001_REGISTERS.h Tue Dec 10 09:00:11 2019 +0000
+++ b/inc/admw1001/ADMW1001_REGISTERS.h Tue Jan 07 05:45:58 2020 +0000
@@ -755,16 +755,24 @@
/* -------------------------------------------------------------------------------------------------------------------------
CORE_CYCLE_CONTROL Pos/Masks Description
------------------------------------------------------------------------------------------------------------------------- */
+#define BITP_CORE_CYCLE_CONTROL_PST_MEAS_EXC_CTRL 15 /* Disable Current Sources After Measurement Completes */
#define BITP_CORE_CYCLE_CONTROL_CYCLE_TIME_UNITS 14 /* Units for Cycle Time */
#define BITP_CORE_CYCLE_CONTROL_VBIAS 13 /* Voltage Bias Global Enable */
+#define BITP_CORE_CYCLE_CONTROL_GND_SW_CTRL 12 /* Ground Switch Cycle Control */
#define BITP_CORE_CYCLE_CONTROL_CYCLE_TIME 0 /* Time Between Measurement Cycles */
+#define BITM_CORE_CYCLE_CONTROL_PST_MEAS_EXC_CTRL 0x00008000 /* Disable Current Sources After Measurement Completes */
#define BITM_CORE_CYCLE_CONTROL_CYCLE_TIME_UNITS 0x00004000 /* Units for Cycle Time */
#define BITM_CORE_CYCLE_CONTROL_VBIAS 0x00002000 /* Voltage Bias Global Enable */
+#define BITM_CORE_CYCLE_CONTROL_GND_SW_CTRL 0x00001000 /* Ground Switch Cycle Control */
#define BITM_CORE_CYCLE_CONTROL_CYCLE_TIME 0x00000FFF /* Time Between Measurement Cycles */
+#define ENUM_CORE_CYCLE_CONTROL_POWERCYCLE 0x00000000
+#define ENUM_CORE_CYCLE_CONTROL_ALWAYSON 0x00008000
#define ENUM_CORE_CYCLE_CONTROL_MILLISECONDS 0x00000000 /* Cycle_Time_Units: Milli-seconds */
#define ENUM_CORE_CYCLE_CONTROL_SECONDS 0x00004000 /* Cycle_Time_Units: Seconds */
#define ENUM_CORE_CYCLE_CONTROL_VBIAS_DISABLE 0x00000000 /* Vbias: Vbias disabled */
#define ENUM_CORE_CYCLE_CONTROL_VBIAS_ENABLE 0x00002000 /* Vbias: Enable Vbias output for the duration of a cycle */
+#define ENUM_CORE_CYCLE_CONTROL_CLOSE_SW 0x00000000 /* GND_SW_CTRL: Ground Switch Closed */
+#define ENUM_CORE_CYCLE_CONTROL_CYCLE_SW 0x00001000 /* GND_SW_CTRL: Ground Switch Opens outside of measurement cycle to conserve power */
/* -------------------------------------------------------------------------------------------------------------------------
CORE_FIFO_NUM_CYCLES Pos/Masks Description
@@ -1029,31 +1037,23 @@
CORE_MEASUREMENT_SETUP[n] Pos/Masks Description
------------------------------------------------------------------------------------------------------------------------- */
#define BITP_CORE_MEASUREMENT_SETUP_BUFFER_BYPASS 15 /* Disable Buffers */
-#define BITP_CORE_MEASUREMENT_SETUP_GND_SW 13 /* Ground Switch Selection */
#define BITP_CORE_MEASUREMENT_SETUP_ADC_FILTER_TYPE 12 /* ADC Digital Filter Type */
#define BITP_CORE_MEASUREMENT_SETUP_CHOP_MODE 10 /* Enabled and Disable Chop Mode */
-#define BITP_CORE_MEASUREMENT_SETUP_PST_MEAS_EXC_CTRL 9 /* Disable Current Sources After Measurement Completes */
#define BITP_CORE_MEASUREMENT_SETUP_NOTCH_EN_2 8 /* Enable Notch 2 Filter Mode */
#define BITP_CORE_MEASUREMENT_SETUP_ADC_SF 0 /* ADC Digital Filter Speed */
#define BITM_CORE_MEASUREMENT_SETUP_BUFFER_BYPASS 0x00008000 /* Disable Buffers */
-#define BITM_CORE_MEASUREMENT_SETUP_GND_SW 0x00006000 /* Ground Switch Selection */
#define BITM_CORE_MEASUREMENT_SETUP_ADC_FILTER_TYPE 0x00001000 /* ADC Digital Filter Type */
#define BITM_CORE_MEASUREMENT_SETUP_CHOP_MODE 0x00000C00 /* Enabled and Disable Chop Mode */
-#define BITM_CORE_MEASUREMENT_SETUP_PST_MEAS_EXC_CTRL 0x00000200 /* Disable Current Sources After Measurement Completes */
#define BITM_CORE_MEASUREMENT_SETUP_NOTCH_EN_2 0x00000100 /* Enable Notch 2 Filter Mode */
#define BITM_CORE_MEASUREMENT_SETUP_ADC_SF 0x0000007F /* ADC Digital Filter Speed */
#define ENUM_CORE_MEASUREMENT_SETUP_BUFFERS_ENABLED 0x00000000 /* Buffer_Bypass: Input buffers enabled */
#define ENUM_CORE_MEASUREMENT_SETUP_BUFFERS_DISABLED 0x00008000 /* Buffer_Bypass: Input buffers disabled */
-#define ENUM_CORE_MEASUREMENT_SETUP_GND_SW_OPEN 0x00000000 /* GND_SW: GND_SW Open. The ground switch is not enabled for the sensor measurement */
-#define ENUM_CORE_MEASUREMENT_SETUP_GND_SW_CLOSED 0x00002000 /* GND_SW: GND_SW Closed. The ground switch is enabled for the sensor measurement, bit wiil Remain Closed After the Measurement */
#define ENUM_CORE_MEASUREMENT_SETUP_ENABLE_SINC4 0x00000000 /* ADC_Filter_Type: Enabled SINC4 filter */
#define ENUM_CORE_MEASUREMENT_SETUP_ENABLE_SINC3 0x00001000 /* ADC_Filter_Type: Enabled SINC3 filter */
#define ENUM_CORE_MEASUREMENT_SETUP_DISABLE_CHOP 0x00000000 /* Chop_Mode: ADC front end chopping disabled */
#define ENUM_CORE_MEASUREMENT_SETUP_HW_CHOP 0x00000400 /* Chop_Mode: Hardware chopping enabled */
#define ENUM_CORE_MEASUREMENT_SETUP_SW_CHOP 0x00000800 /* Chop_Mode: SW chop enabled */
#define ENUM_CORE_MEASUREMENT_SETUP_HW_SW_CHOP 0x00000C00 /* Chop_Mode: Hardware and software chop enabled */
-#define ENUM_CORE_MEASUREMENT_SETUP_POWERCYCLE 0x00000000
-#define ENUM_CORE_MEASUREMENT_SETUP_ALWAYSON 0x00000200
#define ENUM_CORE_MEASUREMENT_SETUP_NOTCH_DIS 0x00000000 /* NOTCH_EN_2: Disable notch filter */
#define ENUM_CORE_MEASUREMENT_SETUP_NOTCH_EN 0x00000100 /* NOTCH_EN_2: Enable notch 2 filter option. */