This library enables users to communicate with the ADXL345 accelerometer through the I2C bus on the mbed. The API names are similar and work nearly the same way as those made in the SPI libraries for the ADXL345.

Dependents:   RoboticsCatAndMouse_HumanDriver

Fork of ADXL345_I2C by Peter Swanson

Files at this revision

API Documentation at this revision

Comitter:
Strikewolf
Date:
Wed Apr 30 05:53:30 2014 +0000
Parent:
1:d9412b56f98a
Commit message:
works without motor

Changed in this revision

main.cpp Show diff for this revision Revisions of this file
mbed.bld Show diff for this revision Revisions of this file
diff -r d9412b56f98a -r 7e41b9136e7a main.cpp
--- a/main.cpp	Thu May 12 01:19:36 2011 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,49 +0,0 @@
-#include "ADXL345_I2C.h"
-
- ADXL345_I2C accelerometer(p28, p27);
- Serial pc(USBTX, USBRX);
-
- int main() {
-       pc.baud(115200);
-     int readings[3] = {0, 0, 0};
-     
-     pc.printf("Starting ADXL345 test...\n");
-     wait(.001);
-     pc.printf("Device ID is: 0x%02x\n", accelerometer.getDeviceID());
-    wait(.001);
-    
-     // These are here to test whether any of the initialization fails. It will print the failure
-    if (accelerometer.setPowerControl(0x00)){
-         pc.printf("didn't intitialize power control\n"); 
-         return 0;  }
-     //Full resolution, +/-16g, 4mg/LSB.
-     wait(.001);
-     
-     if(accelerometer.setDataFormatControl(0x0B)){
-        pc.printf("didn't set data format\n");
-        return 0;  }
-     wait(.001);
-     
-     //3.2kHz data rate.
-     if(accelerometer.setDataRate(ADXL345_3200HZ)){
-        pc.printf("didn't set data rate\n");
-        return 0;    }
-     wait(.001);
-     
-     //Measurement mode.
-     
-     if(accelerometer.setPowerControl(MeasurementMode)) {
-        pc.printf("didn't set the power control to measurement\n"); 
-        return 0;   } 
- 
-     while (1) {
-     
-         wait(0.1);
-         
-         accelerometer.getOutput(readings);
-         
-
-        pc.printf("%i, %i, %i\n", (int16_t)readings[0], (int16_t)readings[1], (int16_t)readings[2]);
-     }
- 
- }
diff -r d9412b56f98a -r 7e41b9136e7a mbed.bld
--- a/mbed.bld	Thu May 12 01:19:36 2011 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,1 +0,0 @@
-http://mbed.org/users/mbed_official/code/mbed/builds/63bcd7ba4912