Erik -
MODSERIAL with support for more devices
Dependents: 1D-Pong BMT-K9_encoder BMT-K9-Regelaar programma_filter ... more
Check the cookbook page for more information: https://mbed.org/cookbook/MODSERIAL
Did you add a device? Please send a pull request so we can keep everything in one library instead of many copies. In that case also send a PM, since currently mbed does not inform of new pull requests. I will then also add you to the developers of this library so you can do other changes directly.
Device/MODSERIAL_KL25Z.h@46:d2a5e26fd658, 2019-05-05 (annotated)
- Committer:
- riaancillie
- Date:
- Sun May 05 14:57:11 2019 +0000
- Revision:
- 46:d2a5e26fd658
- Parent:
- 29:9a41078f0488
Added support for target NUCLEO_F103RB
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| Sissors | 28:76793a84f9e5 | 1 | #if defined(TARGET_KL25Z) |
| Sissors | 28:76793a84f9e5 | 2 | |
| Sissors | 28:76793a84f9e5 | 3 | #define MODSERIAL_IRQ_REG ((UART_Type*)_base)->C2 |
| Sissors | 28:76793a84f9e5 | 4 | #define DISABLE_TX_IRQ MODSERIAL_IRQ_REG &= ~(1UL << UART_C2_TIE_SHIFT) |
| Sissors | 28:76793a84f9e5 | 5 | #define DISABLE_RX_IRQ MODSERIAL_IRQ_REG &= ~(1UL << UART_C2_RIE_SHIFT) |
| Sissors | 28:76793a84f9e5 | 6 | #define ENABLE_TX_IRQ MODSERIAL_IRQ_REG |= (1UL << UART_C2_TIE_SHIFT) |
| Sissors | 28:76793a84f9e5 | 7 | #define ENABLE_RX_IRQ MODSERIAL_IRQ_REG |= (1UL << UART_C2_RIE_SHIFT) |
| Sissors | 28:76793a84f9e5 | 8 | |
| Sissors | 28:76793a84f9e5 | 9 | #define MODSERIAL_READ_REG ((UART_Type*)_base)->D |
| Sissors | 28:76793a84f9e5 | 10 | #define MODSERIAL_WRITE_REG ((UART_Type*)_base)->D |
| Sissors | 28:76793a84f9e5 | 11 | #define MODSERIAL_READABLE ((((UART_Type*)_base)->S1 & (1UL<<5)) != 0) |
| Sissors | 28:76793a84f9e5 | 12 | #define MODSERIAL_WRITABLE ((((UART_Type*)_base)->S1 & (1UL<<7)) != 0) |
| Sissors | 28:76793a84f9e5 | 13 | |
| Sissors | 29:9a41078f0488 | 14 | #define RESET_TX_FIFO while(0 == 1) |
| Sissors | 29:9a41078f0488 | 15 | #define RESET_RX_FIFO while(MODSERIAL_READABLE) char dummy = MODSERIAL_READ_REG |
| Sissors | 29:9a41078f0488 | 16 | |
| Sissors | 28:76793a84f9e5 | 17 | #define RX_IRQ_ENABLED ((MODSERIAL_IRQ_REG & (1UL << UART_C2_RIE_SHIFT)) != 0 ) |
| Sissors | 28:76793a84f9e5 | 18 | #define TX_IRQ_ENABLED ((MODSERIAL_IRQ_REG & (1UL << UART_C2_TIE_SHIFT)) != 0 ) |
| Sissors | 28:76793a84f9e5 | 19 | |
| Sissors | 28:76793a84f9e5 | 20 | #endif |
