![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
temperature sensor with uOLED 96 g1 & GSM Support
Dependencies: OLED160G1 mbed uOLED
Fork of DS18B20 by
Diff: DS18B20.cpp
- Revision:
- 0:03ec282c2908
- Child:
- 1:b2ea1e9d90df
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/DS18B20.cpp Fri Jan 29 19:01:56 2010 +0000 @@ -0,0 +1,86 @@ +#include "DS18B20.h" +#include "DS1Wire.h" +#include "mbed.h" +#include <stdint.h> + +// Device byte commands over 1-wire serial +enum COMMANDS { READ_ROM = 0x33, CONVERT = 0x44, READ_SCRATCHPAD = 0xBE, SKIP_ROM = 0xCC }; + +// device onboard register layout +typedef struct { + uint8_t LSB; + uint8_t MSB; + uint8_t Th; + uint8_t Tl; + uint8_t config; + uint8_t reserved0xFF; + uint8_t reserved0xCH; + uint8_t reserved0x10; + uint8_t CRC; +} ScratchPad_t; + + +DigitalOut conversionInProgress(LED4); // conversion in progress +DigitalOut resetFailure(LED1); // for error reporting +extern DigitalInOut sensor; // sensor pin + +static void inError() { + while (1) { + resetFailure = !resetFailure; + wait(0.2); + } +} + +void DoConversion() { + if (Reset(sensor) != 0) { + inError(); + } else { + conversionInProgress = 1; // led on + WriteByte(sensor, SKIP_ROM); // Skip ROM + WriteByte(sensor, CONVERT); // Convert + while (ReadBit(sensor) == 0) { + // wait for conversion to complete + } + conversionInProgress = 0; // led off + } +} + +uint32_t GetTemperature() { + uint32_t result = 0; + if (Reset(sensor) != 0) { + inError(); + } else { + ScratchPad_t scratchpad; + WriteByte(sensor, SKIP_ROM); // Skip ROM + WriteByte(sensor, READ_SCRATCHPAD); // Read Scrachpad + scratchpad.LSB = ReadByte(sensor); + scratchpad.MSB = ReadByte(sensor); + Reset(sensor); // terminate read as we only want temperature + result = ((scratchpad.MSB << 8) | scratchpad.LSB); + } + return result; +} + +ROM_Code_t ReadROM() { + ROM_Code_t ROM_Code; + if (Reset(sensor) != 0) { + inError(); + } else { + + WriteByte(sensor, READ_ROM); // Read ROM + for (uint32_t i = 0; i < 8; ++i) { + ROM_Code.rom[i] = ReadByte(sensor); + } + } + return ROM_Code; +} + +// temperature is store as 7.4 fixed point format (assuming 12 bit conversion) +void displayTemperature(Serial& s) { + DoConversion(); + uint32_t temp = GetTemperature(); + float f = (temp & 0x0F) * 0.0625; // calculate .4 part + f += (temp >> 4); // add 7.0 part to it + s.printf("Temp is %2.1fC\n\r", f); // display in 2.1 format +} +