Ksenia Kondrashova / Mbed 2 deprecated Temp_&_RH_at_TFT_with_touchscreen-ENG

HYT humidity & temp sensor polling / showing received data at TFT with capacitive touchscreen

Dependencies:   FT800_2 HYT mbed

HYT humidity & temperature sensor: polling and showing data at TFT via graphical controller FT800/FT801.

Hardware

For documentation on the FT800 library, please refer to the library pages.

Connection

MCU-board to TFT-module

MCU-board is connected to TFT-module via Break Out Board. You need 6 signals to connect: SCK, MOSI and MISO are connected to a SPI channel, SS is the chip select signal, PD work as powerdown and INT for interrupts from TFT to MCU.

/media/uploads/Ksenia/4_-22-.jpg

You have to connect VDD to BLVDD at Break Out Board if you use the board:

/media/uploads/Ksenia/4_-5-.jpg

MCU-board to HYT sensor

MCU-board is connected to sensor via I2C. Remember to use pull-up resisrors there:

/media/uploads/Ksenia/freshpaint-20-2016.09.16-10.37.03.png

Подробнее в статьях Как перестать бояться и полюбить mbed [Часть 1 - 5] на https://habrahabr.ru/users/uuuulala/topics/

TFT/display.Draw_AboutSensor.cpp@0:5d3131d1b142, 2016-10-07 (annotated)

Committer:
Ksenia
Date:
Fri Oct 07 11:08:19 2016 +0000
Revision:
0:5d3131d1b142
Initial commit;

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Ksenia 0:5d3131d1b142 1 #include "display.h"
Ksenia 0:5d3131d1b142 2
Ksenia 0:5d3131d1b142 3 /**************************************************************************************************************************
Ksenia 0:5d3131d1b142 4 ************************** Display text & image about the HYT sensor ******************************************************
Ksenia 0:5d3131d1b142 5 **************************************************************************************************************************/
Ksenia 0:5d3131d1b142 6 void Display::AboutSensor()
Ksenia 0:5d3131d1b142 7 {
Ksenia 0:5d3131d1b142 8 // start FT800 display list
Ksenia 0:5d3131d1b142 9 StartDL();
Ksenia 0:5d3131d1b142 10
Ksenia 0:5d3131d1b142 11 // Write text
Ksenia 0:5d3131d1b142 12 (*_TFT).DL(COLOR_RGB(0, 0, 0));
Ksenia 0:5d3131d1b142 13 (*_TFT).DL(BEGIN(LINES));
Ksenia 0:5d3131d1b142 14 (*_TFT).DL(LINE_WIDTH(8));
Ksenia 0:5d3131d1b142 15 (*_TFT).DL(VERTEX2II(14, 79, 0, 0));
Ksenia 0:5d3131d1b142 16 (*_TFT).DL(VERTEX2II(14, 220, 0, 0));
Ksenia 0:5d3131d1b142 17 (*_TFT).Text(24, 78, 27, 0, "Capacitive polymer humidity sensor with I2C interface");
Ksenia 0:5d3131d1b142 18 (*_TFT).DL(COLOR_RGB(9, 0, 63));
Ksenia 0:5d3131d1b142 19 (*_TFT).Text(24, 115, 26, 0, "Measuring range: 0 .. 100% rH, -40 .. 125 C");
Ksenia 0:5d3131d1b142 20 (*_TFT).Text(24, 135, 26, 0, "Accuracy: +/-1.8% rH (0 .. 80% rH),");
Ksenia 0:5d3131d1b142 21 (*_TFT).Text(88, 155, 26, 0, "+/-0.2 C (0 .. 60 C)");
Ksenia 0:5d3131d1b142 22 (*_TFT).Text(24, 175, 26, 0, "Response time: < 4 sec");
Ksenia 0:5d3131d1b142 23 (*_TFT).Text(24, 195, 26, 0, "Operating voltage: 2.7 to 5.5 V");
Ksenia 0:5d3131d1b142 24 (*_TFT).DL(COLOR_RGB(0, 0, 0));
Ksenia 0:5d3131d1b142 25 (*_TFT).Text(11, 15, 30, 0, "HYT-271 sensor from IST");
Ksenia 0:5d3131d1b142 26
Ksenia 0:5d3131d1b142 27 // Show photo
Ksenia 0:5d3131d1b142 28 (*_TFT).DL(COLOR_RGB(255, 255, 255));
Ksenia 0:5d3131d1b142 29 (*_TFT).DL(BEGIN(BITMAPS));
Ksenia 0:5d3131d1b142 30 (*_TFT).DL(VERTEX2II(360, 140, 2, 0));
Ksenia 0:5d3131d1b142 31 (*_TFT).DL(END());
Ksenia 0:5d3131d1b142 32
Ksenia 0:5d3131d1b142 33 // create link to main menu
Ksenia 0:5d3131d1b142 34 MainMenuReference();
Ksenia 0:5d3131d1b142 35
Ksenia 0:5d3131d1b142 36 // finish FT800 display list
Ksenia 0:5d3131d1b142 37 FinishDL();
Ksenia 0:5d3131d1b142 38 }