Ksenia Kondrashova / Mbed 2 deprecated Temp_&_RH_at_TFT_with_touchscreen-ENG

HYT humidity & temp sensor polling / showing received data at TFT with capacitive touchscreen

Dependencies:   FT800_2 HYT mbed

HYT humidity & temperature sensor: polling and showing data at TFT via graphical controller FT800/FT801.

Hardware

For documentation on the FT800 library, please refer to the library pages.

Connection

MCU-board to TFT-module

MCU-board is connected to TFT-module via Break Out Board. You need 6 signals to connect: SCK, MOSI and MISO are connected to a SPI channel, SS is the chip select signal, PD work as powerdown and INT for interrupts from TFT to MCU.

/media/uploads/Ksenia/4_-22-.jpg

You have to connect VDD to BLVDD at Break Out Board if you use the board:

/media/uploads/Ksenia/4_-5-.jpg

MCU-board to HYT sensor

MCU-board is connected to sensor via I2C. Remember to use pull-up resisrors there:

/media/uploads/Ksenia/freshpaint-20-2016.09.16-10.37.03.png

Подробнее в статьях Как перестать бояться и полюбить mbed [Часть 1 - 5] на https://habrahabr.ru/users/uuuulala/topics/

TFT/display.Draw_3hrsStatistics.cpp@0:5d3131d1b142, 2016-10-07 (annotated)

Committer:
Ksenia
Date:
Fri Oct 07 11:08:19 2016 +0000
Revision:
0:5d3131d1b142
Initial commit;

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Ksenia 0:5d3131d1b142 1 #include "display.h"
Ksenia 0:5d3131d1b142 2
Ksenia 0:5d3131d1b142 3 /**************************************************************************************************************************
Ksenia 0:5d3131d1b142 4 ************************** Display data about humidity in the three-hour interval *****************************************
Ksenia 0:5d3131d1b142 5 **************************************************************************************************************************/
Ksenia 0:5d3131d1b142 6
Ksenia 0:5d3131d1b142 7 void Display::StatHumidity_3hrs(volatile uint64_t seconds, short int statistics24hrs[3][288], uint64_t gridSecondsOffset)
Ksenia 0:5d3131d1b142 8 {
Ksenia 0:5d3131d1b142 9 // start FT800 display list
Ksenia 0:5d3131d1b142 10 StartDL();
Ksenia 0:5d3131d1b142 11
Ksenia 0:5d3131d1b142 12 // mark 6 areas for touch input (for zoom in),
Ksenia 0:5d3131d1b142 13 // make each every second zone gray, make the active zone green
Ksenia 0:5d3131d1b142 14 char ZonesCnt = 0;
Ksenia 0:5d3131d1b142 15 for (int i = 25; i < 433; i += 68) {
Ksenia 0:5d3131d1b142 16 (*_TFT).DL(COLOR_RGB(255, 255, 255));
Ksenia 0:5d3131d1b142 17 if (ZonesCnt % 2 == 0) {
Ksenia 0:5d3131d1b142 18 (*_TFT).DL(COLOR_RGB(233, 233, 233));
Ksenia 0:5d3131d1b142 19 }
Ksenia 0:5d3131d1b142 20 if (pressedButton - ZONE_1_PRESS == ZonesCnt) {
Ksenia 0:5d3131d1b142 21 (*_TFT).DL(COLOR_RGB(200, 255, 200));
Ksenia 0:5d3131d1b142 22 timePoint30min = 6 * ZonesCnt;
Ksenia 0:5d3131d1b142 23 }
Ksenia 0:5d3131d1b142 24 (*_TFT).DL(TAG_MASK(1));
Ksenia 0:5d3131d1b142 25 (*_TFT).DL(TAG(ZONE_1_PRESS + ZonesCnt));
Ksenia 0:5d3131d1b142 26 (*_TFT).DL(BEGIN(RECTS));
Ksenia 0:5d3131d1b142 27 (*_TFT).DL(VERTEX2II(i, 100, 0, 0));
Ksenia 0:5d3131d1b142 28 (*_TFT).DL(VERTEX2II(i + 68, 200, 0, 0));
Ksenia 0:5d3131d1b142 29 (*_TFT).DL(TAG_MASK(0));
Ksenia 0:5d3131d1b142 30 ZonesCnt++;
Ksenia 0:5d3131d1b142 31 }
Ksenia 0:5d3131d1b142 32
Ksenia 0:5d3131d1b142 33 // create time string, GridLines, link to main menu
Ksenia 0:5d3131d1b142 34 TimeSinceTurnOn(seconds);
Ksenia 0:5d3131d1b142 35 VerticalGrid3hrs(gridSecondsOffset);
Ksenia 0:5d3131d1b142 36 HorisontalGrid_Statistics_Humidity();
Ksenia 0:5d3131d1b142 37 MainMenuReference();
Ksenia 0:5d3131d1b142 38
Ksenia 0:5d3131d1b142 39 // draw graph line
Ksenia 0:5d3131d1b142 40 for (int i = 0; i < 36; i++) {
Ksenia 0:5d3131d1b142 41 char currentValue = statistics24hrs[0][i + timePoint3hrs];
Ksenia 0:5d3131d1b142 42 char currentMinValue = statistics24hrs[1][i + timePoint3hrs];
Ksenia 0:5d3131d1b142 43 char currentMaxValue = statistics24hrs[2][i + timePoint3hrs];
Ksenia 0:5d3131d1b142 44 if (currentValue != INIT_STATISTICS_NUMBER) {
Ksenia 0:5d3131d1b142 45 (*_TFT).DL(COLOR_RGB(9, 0, 63));
Ksenia 0:5d3131d1b142 46 if (currentMaxValue - currentMinValue >= DELTA_HUMIDITY) {
Ksenia 0:5d3131d1b142 47 (*_TFT).DL(COLOR_RGB(207, 45, 13));
Ksenia 0:5d3131d1b142 48 (*_TFT).DL(BEGIN(LINES));
Ksenia 0:5d3131d1b142 49 (*_TFT).DL(LINE_WIDTH(16));
Ksenia 0:5d3131d1b142 50 (*_TFT).DL(VERTEX2F(i * 181 + 25 * 16, (200 - currentValue) * 16));
Ksenia 0:5d3131d1b142 51 (*_TFT).DL(VERTEX2F(i * 181 + 25 * 16, (200 - currentMaxValue) * 16));
Ksenia 0:5d3131d1b142 52 (*_TFT).DL(VERTEX2F(i * 181 + 22 * 16, (200 - currentMaxValue) * 16));
Ksenia 0:5d3131d1b142 53 (*_TFT).DL(VERTEX2F(i * 181 + 28 * 16, (200 - currentMaxValue) * 16));
Ksenia 0:5d3131d1b142 54 (*_TFT).DL(END());
Ksenia 0:5d3131d1b142 55 (*_TFT).DL(BEGIN(LINES));
Ksenia 0:5d3131d1b142 56 (*_TFT).DL(LINE_WIDTH(16));
Ksenia 0:5d3131d1b142 57 (*_TFT).DL(VERTEX2F(i * 181 + 25 * 16, (200 - currentValue) * 16));
Ksenia 0:5d3131d1b142 58 (*_TFT).DL(VERTEX2F(i * 181 + 25 * 16, (200 - currentMinValue) * 16));
Ksenia 0:5d3131d1b142 59 (*_TFT).DL(VERTEX2F(i * 181 + 22 * 16, (200 - currentMinValue) * 16));
Ksenia 0:5d3131d1b142 60 (*_TFT).DL(VERTEX2F(i * 181 + 28 * 16, (200 - currentMinValue) * 16));
Ksenia 0:5d3131d1b142 61 (*_TFT).DL(END());
Ksenia 0:5d3131d1b142 62 }
Ksenia 0:5d3131d1b142 63 (*_TFT).DL(BEGIN(POINTS));
Ksenia 0:5d3131d1b142 64 (*_TFT).DL(POINT_SIZE(45));
Ksenia 0:5d3131d1b142 65 (*_TFT).DL(VERTEX2F(i * 181 + 25 * 16, (200 - currentValue) * 16));
Ksenia 0:5d3131d1b142 66 }
Ksenia 0:5d3131d1b142 67 }
Ksenia 0:5d3131d1b142 68
Ksenia 0:5d3131d1b142 69 // write main title
Ksenia 0:5d3131d1b142 70 (*_TFT).DL(COLOR_RGB(0, 0, 0));
Ksenia 0:5d3131d1b142 71 (*_TFT).Text(11, 15, 30, 0, "Humidity statistics (3 hrs)");
Ksenia 0:5d3131d1b142 72
Ksenia 0:5d3131d1b142 73 // finish FT800 display list
Ksenia 0:5d3131d1b142 74 FinishDL();
Ksenia 0:5d3131d1b142 75 }
Ksenia 0:5d3131d1b142 76
Ksenia 0:5d3131d1b142 77 /**************************************************************************************************************************
Ksenia 0:5d3131d1b142 78 ************************** Display data about temeprature in the three-hour interval **************************************
Ksenia 0:5d3131d1b142 79 **************************************************************************************************************************/
Ksenia 0:5d3131d1b142 80 void Display::StatTemperature_3hrs(volatile uint64_t seconds, short int statistics24hrs[3][288], uint64_t gridSecondsOffset)
Ksenia 0:5d3131d1b142 81 {
Ksenia 0:5d3131d1b142 82 // start FT800 display list
Ksenia 0:5d3131d1b142 83 StartDL();
Ksenia 0:5d3131d1b142 84
Ksenia 0:5d3131d1b142 85 // mark 6 areas for touch input (for zoom in),
Ksenia 0:5d3131d1b142 86 // make each every second zone gray, make the active zone green
Ksenia 0:5d3131d1b142 87 char ZonesCnt = 0;
Ksenia 0:5d3131d1b142 88 for (int i = 25; i < 433; i += 68) {
Ksenia 0:5d3131d1b142 89 (*_TFT).DL(COLOR_RGB(255, 255, 255));
Ksenia 0:5d3131d1b142 90 if (ZonesCnt % 2 == 0) {
Ksenia 0:5d3131d1b142 91 (*_TFT).DL(COLOR_RGB(233, 233, 233));
Ksenia 0:5d3131d1b142 92 }
Ksenia 0:5d3131d1b142 93 if (pressedButton - ZONE_1_PRESS == ZonesCnt) {
Ksenia 0:5d3131d1b142 94 (*_TFT).DL(COLOR_RGB(200, 255, 200));
Ksenia 0:5d3131d1b142 95 timePoint30min = 6 * ZonesCnt;
Ksenia 0:5d3131d1b142 96 }
Ksenia 0:5d3131d1b142 97 (*_TFT).DL(TAG_MASK(1));
Ksenia 0:5d3131d1b142 98 (*_TFT).DL(TAG(ZONE_1_PRESS + ZonesCnt));
Ksenia 0:5d3131d1b142 99 (*_TFT).DL(BEGIN(RECTS));
Ksenia 0:5d3131d1b142 100 (*_TFT).DL(VERTEX2II(i, 100, 0, 0));
Ksenia 0:5d3131d1b142 101 (*_TFT).DL(VERTEX2II(i + 68, 200, 0, 0));
Ksenia 0:5d3131d1b142 102 (*_TFT).DL(TAG_MASK(0));
Ksenia 0:5d3131d1b142 103 ZonesCnt++;
Ksenia 0:5d3131d1b142 104 }
Ksenia 0:5d3131d1b142 105
Ksenia 0:5d3131d1b142 106 // create time string, GridLines, link to main menu
Ksenia 0:5d3131d1b142 107 TimeSinceTurnOn(seconds);
Ksenia 0:5d3131d1b142 108 VerticalGrid3hrs(gridSecondsOffset);
Ksenia 0:5d3131d1b142 109 HorisontalGrid_Statistics_Temperature();
Ksenia 0:5d3131d1b142 110 MainMenuReference();
Ksenia 0:5d3131d1b142 111
Ksenia 0:5d3131d1b142 112 // draw graph line
Ksenia 0:5d3131d1b142 113 for (int i = 0; i < 36; i++) {
Ksenia 0:5d3131d1b142 114 char currentValue = (statistics24hrs[0][i + timePoint3hrs] / TEMPERATURE_MULTIPLIER + 50) * 0.57;
Ksenia 0:5d3131d1b142 115 char currentMinValue = (statistics24hrs[1][i + timePoint3hrs] / TEMPERATURE_MULTIPLIER + 50) * 0.57;
Ksenia 0:5d3131d1b142 116 char currentMaxValue = (statistics24hrs[2][i + timePoint3hrs] / TEMPERATURE_MULTIPLIER + 50) * 0.57;
Ksenia 0:5d3131d1b142 117 char delta = statistics24hrs[2][i + timePoint3hrs] - statistics24hrs[1][i + timePoint3hrs];
Ksenia 0:5d3131d1b142 118
Ksenia 0:5d3131d1b142 119 if (statistics24hrs[0][i + timePoint3hrs] != INIT_STATISTICS_NUMBER) {
Ksenia 0:5d3131d1b142 120 (*_TFT).DL(COLOR_RGB(9, 0, 63));
Ksenia 0:5d3131d1b142 121 if (delta >= DELTA_TEMPERATURE + TEMPERATURE_MULTIPLIER) {
Ksenia 0:5d3131d1b142 122 (*_TFT).DL(COLOR_RGB(207, 45, 13));
Ksenia 0:5d3131d1b142 123 (*_TFT).DL(BEGIN(LINES));
Ksenia 0:5d3131d1b142 124 (*_TFT).DL(LINE_WIDTH(16));
Ksenia 0:5d3131d1b142 125 (*_TFT).DL(VERTEX2F(i * 181 + 25 * 16, (200 - currentValue) * 16));
Ksenia 0:5d3131d1b142 126 (*_TFT).DL(VERTEX2F(i * 181 + 25 * 16, (200 - currentMaxValue) * 16));
Ksenia 0:5d3131d1b142 127 (*_TFT).DL(VERTEX2F(i * 181 + 22 * 16, (200 - currentMaxValue) * 16));
Ksenia 0:5d3131d1b142 128 (*_TFT).DL(VERTEX2F(i * 181 + 28 * 16, (200 - currentMaxValue) * 16));
Ksenia 0:5d3131d1b142 129 (*_TFT).DL(END());
Ksenia 0:5d3131d1b142 130 (*_TFT).DL(BEGIN(LINES));
Ksenia 0:5d3131d1b142 131 (*_TFT).DL(LINE_WIDTH(16));
Ksenia 0:5d3131d1b142 132 (*_TFT).DL(VERTEX2F(i * 181 + 25 * 16, (200 - currentValue) * 16));
Ksenia 0:5d3131d1b142 133 (*_TFT).DL(VERTEX2F(i * 181 + 25 * 16, (200 - currentMinValue) * 16));
Ksenia 0:5d3131d1b142 134 (*_TFT).DL(VERTEX2F(i * 181 + 22 * 16, (200 - currentMinValue) * 16));
Ksenia 0:5d3131d1b142 135 (*_TFT).DL(VERTEX2F(i * 181 + 28 * 16, (200 - currentMinValue) * 16));
Ksenia 0:5d3131d1b142 136 (*_TFT).DL(END());
Ksenia 0:5d3131d1b142 137 }
Ksenia 0:5d3131d1b142 138 (*_TFT).DL(BEGIN(POINTS));
Ksenia 0:5d3131d1b142 139 (*_TFT).DL(POINT_SIZE(45));
Ksenia 0:5d3131d1b142 140 (*_TFT).DL(VERTEX2F(i * 181 + 25 * 16, (200 - currentValue) * 16));
Ksenia 0:5d3131d1b142 141 }
Ksenia 0:5d3131d1b142 142 }
Ksenia 0:5d3131d1b142 143
Ksenia 0:5d3131d1b142 144 // write main title
Ksenia 0:5d3131d1b142 145 (*_TFT).DL(COLOR_RGB(0, 0, 0));
Ksenia 0:5d3131d1b142 146 (*_TFT).Text(11, 15, 30, 0, "Temperature statistics (3 hrs)");
Ksenia 0:5d3131d1b142 147
Ksenia 0:5d3131d1b142 148 // finish FT800 display list
Ksenia 0:5d3131d1b142 149 FinishDL();
Ksenia 0:5d3131d1b142 150 }