Very simple program for FT800 graphic lib (using touchscreen - button, key and slider demo)

Dependencies:   FT800_2 mbed

There is the only screen for touch screen functionality demonstration

https://habrastorage.org/files/b11/0ee/7c8/b110ee7c8e5345f8aa0876ca693ddb7a

Hardware

For documentation on the FT800 library, please refer to the respective library pages.

Connection

MCU-board is connected to TFT-module via Break Out Board. You need 6 signals to connect: SCK, MOSI and MISO are connected to a SPI channel, SS is the chip select signal, PD work as powerdown and INT for interrupts from TFT to MCU.

/media/uploads/Ksenia/4_-22-.jpg

You have to connect VDD to BLVDD at Break Out Board if you use the board:

/media/uploads/Ksenia/4_-5-.jpg

Проект для статьи "Как перестать бояться и полюбить mbed.[Часть 4]" См. https://habrahabr.ru/users/uuuulala/topics/

unknown revision 'shortlog'