Ksenia Kondrashova
Very simple program for FT800 graphic lib (using touchscreen - button, key and slider demo)
There is the only screen for touch screen functionality demonstration
Hardware
- TFT module uxTouch by Riverdi
- Break Out Board 20 by Riverdi
- Any mbed platform with I2C interface, SPI interface and 2 free GPIO for PD and INT signals
For documentation on the FT800 library, please refer to the respective library pages.
Connection
MCU-board is connected to TFT-module via Break Out Board. You need 6 signals to connect: SCK, MOSI and MISO are connected to a SPI channel, SS is the chip select signal, PD work as powerdown and INT for interrupts from TFT to MCU.
You have to connect VDD to BLVDD at Break Out Board if you use the board:
Проект для статьи "Как перестать бояться и полюбить mbed.[Часть 4]" См. https://habrahabr.ru/users/uuuulala/topics/
Changes
| Revision | Date | Who | Commit message |
|---|---|---|---|
| 0:0b7d575ba7c8 | 2016-09-23 | Ksenia | Initial commit |