Diff: platform/ezconnect/BG96-driver/BG96/BG96.h

Revision:

0:082731ede69f

diff -r 000000000000 -r 082731ede69f platform/ezconnect/BG96-driver/BG96/BG96.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/platform/ezconnect/BG96-driver/BG96/BG96.h	Wed May 30 20:59:51 2018 +0000
@@ -0,0 +1,240 @@
+/**
+* copyright (c) 2018, James Flynn
+* SPDX-License-Identifier: Apache-2.0
+*/
+
+/* 
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
+ 
+/**
+*   @file   BG96.h
+*   @brief  Implements NetworkInterface class for use with the Quectel BG96
+*           data module running MBed OS v5.x
+*
+*   @author James Flynn
+*
+*   @date   1-April-2018
+*/
+
+#ifndef __BG96_H__
+#define __BG96_H__
+
+#include "mbed.h"
+ 
+// If target board does not support Arduino pins, define pins as Not Connected
+#if defined(TARGET_FF_ARDUINO)
+#if !defined(MBED_CONF_BG96_LIBRARY_BG96_TX)
+#define MBED_CONF_BG96_LIBRARY_BG96_TX               D8
+#endif
+#if !defined(MBED_CONF_BG96_LIBRARY_BG96_RX)
+#define MBED_CONF_BG96_LIBRARY_BG96_RX               D2
+#endif
+#if !defined(MBED_CONF_BG96_LIBRARY_BG96_RESET)
+#define MBED_CONF_BG96_LIBRARY_BG96_RESET            D7
+#endif
+#if !defined(MBED_CONF_BG96_LIBRARY_BG96_WAKE)
+#define MBED_CONF_BG96_LIBRARY_BG96_WAKE             D11
+#endif
+#if !defined(MBED_CONF_BG96_LIBRARY_BG96_PWRKEY)
+#define MBED_CONF_BG96_LIBRARY_BG96_PWRKEY           D10
+#endif
+#else // !defined(TARGET_FF_ARDUINO)
+#define MBED_CONF_BG96_LIBRARY_BG96_TX                NC
+#define MBED_CONF_BG96_LIBRARY_BG96_RX                NC
+#define MBED_CONF_BG96_LIBRARY_BG96_RESET             NC
+#define MBED_CONF_BG96_LIBRARY_BG96_WAKE              NC
+#define MBED_CONF_BG96_LIBRARY_BG96_PWRKEY            NC
+#endif // !defined(TARGET_FF_ARDUINO)
+
+/** BG96Interface class.
+    Interface to a BG96 module.
+ */
+
+class BG96
+{
+public:
+    static const unsigned BG96_BUFF_SIZE = 1500;  
+    
+    BG96(bool debug=false);
+    ~BG96();
+
+    /**
+    * Init the BG96
+    *
+    * @param mode mode in which to startup
+    * @return true only if BG96 has started up correctly
+    */
+    bool startup(void);
+ 
+    /**
+    * Wait for 'RDY' signal or timeout waiting...
+    *
+    * @return none.
+    */
+    void waitBG96Ready(void);
+
+    /**
+    * Reset BG96
+    *
+    * @return true if BG96 resets successfully
+    */
+    void reset(void);
+    
+    /**
+    * Connect BG96 to APN
+    *
+    * @param apn the name of the APN
+    * @param username (not used)
+    * @param password (not used)
+    * @return nsapi_error_t
+    */
+    nsapi_error_t connect(const char *apn, const char *username, const char *password);
+ 
+    /**
+    * Disconnect BG96 from AP
+    *
+    * @return true if BG96 is disconnected successfully
+    */
+    bool disconnect(void);
+ 
+    /**
+    * Get the IP address of BG96
+    *
+    * @return null-teriminated IP address or null if no IP address is assigned
+    */
+    const char *getIPAddress(char*);
+ 
+    /**
+    * Get the MAC address of BG96
+    *
+    * @return null-terminated MAC address or null if no MAC address is assigned
+    */
+    const char *getMACAddress(char*);
+ 
+    /**
+    * Check if BG96 is conenected
+    *
+    * @return true only if the chip has an IP address
+    */
+    bool isConnected(void);
+ 
+    /**
+    * Open a socketed connection
+    *
+    * @param type the type of socket to open "u" (UDP) or "t" (TCP)
+    * @param id for saving socket number to (returned by BG96)
+    * @param port port to open connection with
+    * @param addr the IP address of the destination
+    * @return true only if socket opened successfully
+    */
+    bool open(const char type, int id, const char* addr, int port);
+ 
+    /**
+    * Sends data to an open socket
+    *
+    * @param id of socket to send to
+    * @param data to be sent
+    * @param amount of data to be sent 
+    * @return true only if data sent successfully
+    */
+    bool send(int id, const void *data, uint32_t amount);
+ 
+    /**
+    * Receives data from an open socket
+    *
+    * @param id to receive from
+    * @param pointer to data for returned information
+    * @param amount number of bytes to be received
+    * @return the number of bytes received
+    */
+    int32_t recv(int, void *, uint32_t);
+ 
+    /**
+    * Closes a socket
+    *
+    * @param id id of socket to close, valid only 0-4
+    * @return true only if socket is closed successfully
+    */
+    bool close(int id);
+ 
+    /**
+    * Checks if data is available
+    */
+    bool readable();
+ 
+    /**
+    * Checks if data can be written
+    */
+    bool writeable();
+    
+    /**
+    * Resolves a URL name to IP address
+    */
+    bool resolveUrl(const char *name, char* str);
+ 
+    /*
+    * Obtain or set the current BG96 active context
+    */
+    int setContext( int i );
+    
+    /*
+    * enable/disable AT command tracing
+    */
+    void doDebug(int f);
+    
+    /** Return the BG96 revision info
+     *
+     *  @param          none.
+     */
+    const char* getRev(char*);
+
+    /** Return the last error to occur
+     *
+     *  @param          char* [at least 40 long]
+     */
+    bool getError(char *);
+
+    /** Return the amount a data available
+     *
+     *  @param          char* [at least 40 long]
+     */
+    int rxAvail(int);
+
+    /** Return true/false if rx data is available 
+     *
+     *  @param          socket to check
+     */
+    bool        chkRxAvail(int id);
+
+private:
+    bool        tx2bg96(char* cmd);
+    bool        BG96Ready(void);
+    bool        hw_reset(void);
+
+    int         _contextID;
+    Mutex       _bg96_mutex;
+
+    UARTSerial  _serial;
+    ATCmdParser _parser;
+
+    DigitalOut _bg96_reset;
+    DigitalOut _vbat_3v8_en;
+    DigitalOut _bg96_pwrkey;
+    
+};
+ 
+#endif  //__BG96_H__
+