Jim Flynn
Changes to enabled on-line compiler
Diff: examples/subscribe_publish_sample/subscribe_publish_sample.cpp
- Revision:
- 0:082731ede69f
diff -r 000000000000 -r 082731ede69f examples/subscribe_publish_sample/subscribe_publish_sample.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/examples/subscribe_publish_sample/subscribe_publish_sample.cpp Wed May 30 20:59:51 2018 +0000
@@ -0,0 +1,249 @@
+/*
+ * Copyright 2010-2015 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License").
+ * You may not use this file except in compliance with the License.
+ * A copy of the License is located at
+ *
+ * http://aws.amazon.com/apache2.0
+ *
+ * or in the "license" file accompanying this file. This file is distributed
+ * on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
+ * express or implied. See the License for the specific language governing
+ * permissions and limitations under the License.
+ */
+
+/**
+ * @file subscribe_publish_sample.c
+ * @brief simple MQTT publish and subscribe on the same topic
+ *
+ * This example takes the parameters from the aws_iot_config.h file and establishes a connection to the AWS IoT MQTT Platform.
+ * It subscribes and publishes to the same topic - "sdkTest/sub"
+ *
+ * If all the certs are correct, you should see the messages received by the application in a loop.
+ *
+ * The application takes in the certificate path, host name , port and the number of times the publish should happen.
+ *
+ */
+#include <stdio.h>
+#include <stdlib.h>
+#include <ctype.h>
+#include <limits.h>
+#include <string.h>
+
+#include "aws_iot_config.h"
+#include "aws_iot_log.h"
+#include "aws_iot_version.h"
+#include "aws_iot_mqtt_client_interface.h"
+
+#include "easy-connect.h"
+#include "WNC14A2AInterface.h"
+
+#define HOST_ADDRESS_SIZE 255
+
+Thread aws_subscribe_publish(osPriorityNormal, 16*1024, NULL);
+void aws_subscribe_publish_task(void);
+
+/**
+ * @brief Default cert location
+ */
+char certDirectory[PATH_MAX + 1] = "../../../certs";
+
+/**
+ * @brief Default MQTT HOST URL is pulled from the aws_iot_config.h
+ */
+char HostAddress[HOST_ADDRESS_SIZE] = AWS_IOT_MQTT_HOST;
+
+/**
+ * @brief Default MQTT port is pulled from the aws_iot_config.h
+ */
+uint32_t port = AWS_IOT_MQTT_PORT;
+
+/**
+ * @brief This parameter will avoid infinite loop of publish and exit the program after certain number of publishes
+ */
+uint32_t publishCount = 0;
+
+void iot_subscribe_callback_handler(AWS_IoT_Client *pClient, char *topicName, uint16_t topicNameLen,
+ IoT_Publish_Message_Params *params, void *pData) {
+ IOT_UNUSED(pData);
+ IOT_UNUSED(pClient);
+ IOT_INFO("Subscribe callback");
+ IOT_INFO("%.*s\t%.*s", topicNameLen, topicName, (int) params->payloadLen, (char *) params->payload);
+}
+
+void disconnectCallbackHandler(AWS_IoT_Client *pClient, void *data) {
+ IOT_WARN("MQTT Disconnect");
+ IoT_Error_t rc = FAILURE;
+
+ if(NULL == pClient) {
+ return;
+ }
+
+ IOT_UNUSED(data);
+
+ if(aws_iot_is_autoreconnect_enabled(pClient)) {
+ IOT_INFO("Auto Reconnect is enabled, Reconnecting attempt will start now");
+ } else {
+ IOT_WARN("Auto Reconnect not enabled. Starting manual reconnect...");
+ rc = aws_iot_mqtt_attempt_reconnect(pClient);
+ if(NETWORK_RECONNECTED == rc) {
+ IOT_WARN("Manual Reconnect Successful");
+ } else {
+ IOT_WARN("Manual Reconnect Failed - %d", rc);
+ }
+ }
+}
+
+
+int main()
+{
+ printf("AWS %s Example.\n",__FILE__);
+ IOT_INFO("\nAWS IoT SDK Version %d.%d.%d-%s\n", VERSION_MAJOR, VERSION_MINOR, VERSION_PATCH, VERSION_TAG);
+
+ aws_subscribe_publish.start(aws_subscribe_publish_task);
+ aws_subscribe_publish.join();
+ printf(" - - - - - - - ALL DONE - - - - - - - \n");
+}
+
+void aws_subscribe_publish_task()
+{
+ bool infinitePublishFlag = true;
+
+ char rootCA[PATH_MAX + 1];
+ char clientCRT[PATH_MAX + 1];
+ char clientKey[PATH_MAX + 1];
+ char CurrentWD[PATH_MAX + 1];
+ char cPayload[100];
+
+ int32_t i = 0;
+
+ IoT_Error_t rc = FAILURE;
+
+ AWS_IoT_Client client;
+ IoT_Client_Init_Params mqttInitParams = iotClientInitParamsDefault;
+ IoT_Client_Connect_Params connectParams = iotClientConnectParamsDefault;
+
+ IoT_Publish_Message_Params paramsQOS0;
+ IoT_Publish_Message_Params paramsQOS1;
+
+ IOT_INFO("\nAWS IoT SDK Version %d.%d.%d-%s\n", VERSION_MAJOR, VERSION_MINOR, VERSION_PATCH, VERSION_TAG);
+
+ snprintf(rootCA, PATH_MAX + 1, "%s/%s/%s", CurrentWD, certDirectory, AWS_IOT_ROOT_CA_FILENAME);
+ snprintf(clientCRT, PATH_MAX + 1, "%s/%s/%s", CurrentWD, certDirectory, AWS_IOT_CERTIFICATE_FILENAME);
+ snprintf(clientKey, PATH_MAX + 1, "%s/%s/%s", CurrentWD, certDirectory, AWS_IOT_PRIVATE_KEY_FILENAME);
+
+ IOT_DEBUG("rootCA %s", rootCA);
+ IOT_DEBUG("clientCRT %s", clientCRT);
+ IOT_DEBUG("clientKey %s", clientKey);
+ mqttInitParams.enableAutoReconnect = false; // We enable this later below
+ mqttInitParams.pHostURL = HostAddress;
+ mqttInitParams.port = port;
+ mqttInitParams.pRootCALocation = rootCA;
+ mqttInitParams.pDeviceCertLocation = clientCRT;
+ mqttInitParams.pDevicePrivateKeyLocation = clientKey;
+ mqttInitParams.mqttCommandTimeout_ms = 20000;
+ mqttInitParams.tlsHandshakeTimeout_ms = 5000;
+ mqttInitParams.isSSLHostnameVerify = true;
+ mqttInitParams.disconnectHandler = disconnectCallbackHandler;
+ mqttInitParams.disconnectHandlerData = NULL;
+
+ rc = aws_iot_mqtt_init(&client, &mqttInitParams);
+ if(SUCCESS != rc) {
+ IOT_ERROR("aws_iot_mqtt_init returned error : %d ", rc);
+ return;
+ }
+
+ connectParams.keepAliveIntervalInSec = 600;
+ connectParams.isCleanSession = true;
+ connectParams.MQTTVersion = MQTT_3_1_1;
+ connectParams.pClientID = AWS_IOT_MQTT_CLIENT_ID;
+ connectParams.clientIDLen = (uint16_t) strlen(AWS_IOT_MQTT_CLIENT_ID);
+ connectParams.isWillMsgPresent = false;
+
+ IOT_INFO("Connecting...");
+ rc = aws_iot_mqtt_connect(&client, &connectParams);
+ if(SUCCESS != rc) {
+ IOT_ERROR("Error(%d) connecting to %s:%d", rc, mqttInitParams.pHostURL, mqttInitParams.port);
+ return;
+ }
+ /*
+ * Enable Auto Reconnect functionality. Minimum and Maximum time of Exponential backoff are set in aws_iot_config.h
+ * #AWS_IOT_MQTT_MIN_RECONNECT_WAIT_INTERVAL
+ * #AWS_IOT_MQTT_MAX_RECONNECT_WAIT_INTERVAL
+ */
+ rc = aws_iot_mqtt_autoreconnect_set_status(&client, true);
+ if(SUCCESS != rc) {
+ IOT_ERROR("Unable to set Auto Reconnect to true - %d", rc);
+ return;
+ }
+
+ IOT_INFO("Subscribing...");
+ rc = aws_iot_mqtt_subscribe(&client, "sdkTest/sub", 11, QOS0, iot_subscribe_callback_handler, NULL);
+ if(SUCCESS != rc) {
+ IOT_ERROR("Error subscribing : %d ", rc);
+ return;
+ }
+
+ sprintf(cPayload, "%s : %ld ", "hello from SDK", i);
+
+ paramsQOS0.qos = QOS0;
+ paramsQOS0.payload = (void *) cPayload;
+ paramsQOS0.isRetained = 0;
+
+ paramsQOS1.qos = QOS1;
+ paramsQOS1.payload = (void *) cPayload;
+ paramsQOS1.isRetained = 0;
+
+ if(publishCount != 0) {
+ infinitePublishFlag = false;
+ }
+
+ while((NETWORK_ATTEMPTING_RECONNECT == rc || NETWORK_RECONNECTED == rc || SUCCESS == rc)
+ && (publishCount > 0 || infinitePublishFlag)) {
+
+ //Max time the yield function will wait for read messages
+ rc = aws_iot_mqtt_yield(&client, 100);
+ if(NETWORK_ATTEMPTING_RECONNECT == rc) {
+ // If the client is attempting to reconnect we will skip the rest of the loop.
+ continue;
+ }
+
+ IOT_INFO("-->sleep");
+ wait(1);
+ sprintf(cPayload, "%s : %ld ", "hello from SDK QOS0", i++);
+ paramsQOS0.payloadLen = strlen(cPayload);
+ rc = aws_iot_mqtt_publish(&client, "sdkTest/sub", 11, ¶msQOS0);
+ if(publishCount > 0) {
+ publishCount--;
+ }
+
+ if(publishCount == 0 && !infinitePublishFlag) {
+ break;
+ }
+
+ sprintf(cPayload, "%s : %ld ", "hello from SDK QOS1", i++);
+ paramsQOS1.payloadLen = strlen(cPayload);
+ rc = aws_iot_mqtt_publish(&client, "sdkTest/sub", 11, ¶msQOS1);
+ if (rc == MQTT_REQUEST_TIMEOUT_ERROR) {
+ IOT_WARN("QOS1 publish ack not received.\n");
+ rc = SUCCESS;
+ }
+ if(publishCount > 0) {
+ publishCount--;
+ }
+ }
+
+ // Wait for all the messages to be received
+ aws_iot_mqtt_yield(&client, 100);
+
+ if(SUCCESS != rc) {
+ IOT_ERROR("An error occurred in the loop.\n");
+ } else {
+ IOT_INFO("Publish done\n");
+ }
+
+ return;
+}
+
+