History

All working, but Position_x and Position_y don't start at value 0, which causes spontaneous motor action. default tip

2016-10-24, by GerhardBerman [Mon, 24 Oct 2016 09:07:07 +0000] rev 18

All working, but Position_x and Position_y don't start at value 0, which causes spontaneous motor action.

Added things to consider before use in robot

2016-10-21, by GerhardBerman [Fri, 21 Oct 2016 10:39:46 +0000] rev 17

Added things to consider before use in robot

All working, motorValues scaled down to 1/10 for first testing.

2016-10-20, by GerhardBerman [Thu, 20 Oct 2016 13:14:03 +0000] rev 16

All working, motorValues scaled down to 1/10 for first testing.

All working!

2016-10-20, by GerhardBerman [Thu, 20 Oct 2016 13:11:09 +0000] rev 15

All working!

Encoder pins switched, cw/ccw problem changed. Not yet tested

2016-10-20, by GerhardBerman [Thu, 20 Oct 2016 12:31:42 +0000] rev 14

Encoder pins switched, cw/ccw problem changed. Not yet tested

Working with Putty, no spontaneous motor action. Encoder 2 is NOT WORKING

2016-10-20, by GerhardBerman [Thu, 20 Oct 2016 11:24:19 +0000] rev 13

Working with Putty, no spontaneous motor action. Encoder 2 is NOT WORKING

Working with Putty, no spontaneous motor action!

2016-10-20, by GerhardBerman [Thu, 20 Oct 2016 11:15:10 +0000] rev 12

Working with Putty, no spontaneous motor action!

Working, includes HIDScope, motor and LED action!

2016-10-19, by GerhardBerman [Wed, 19 Oct 2016 16:28:11 +0000] rev 11

Working, includes HIDScope, motor and LED action!

NO errors, not yet tested at board

2016-10-19, by GerhardBerman [Wed, 19 Oct 2016 16:14:25 +0000] rev 10

NO errors, not yet tested at board

Double functions (one for motor 1, one for motor 2) replaced by single. No errors, no reaction on board

2016-10-19, by GerhardBerman [Wed, 19 Oct 2016 15:38:44 +0000] rev 9

Double functions (one for motor 1, one for motor 2) replaced by single. No errors, no reaction on board