ksdflsjdfljas
Dependencies: Adafruit-16-Ch-PWM-Servo-Driver HCSR04 PID PololuQik2 QEI Sharp mbed-rtos
Fork of theRobot by
main.cpp
- Committer:
- Fairy_Paolina
- Date:
- 2014-04-05
- Revision:
- 21:2936d9566213
- Parent:
- 20:b9cbaf7566e9
File content as of revision 21:2936d9566213:
#include "mbed.h" #include "Adafruit_PWMServoDriver.h" #include "ShapeDetect.h" #include "rtos.h" #include "PID.h" #include "PololuQik2.h" #include "QEI.h" #include "HCSR04.h" #include "stdio.h" #include "LPC17xx.h" #include "Sharp.h" /* Navigation Definitions */ #define PIN_TRIGGERL (p12) #define PIN_ECHOL (p11) #define PIN_TRIGGERR (p29) #define PIN_ECHOR (p30) #define PULSE_PER_REV (1192) #define WHEEL_CIRCUM (12.56637) #define DIST_PER_PULSE (0.01054225722682) #define MTRS_TO_INCH (39.3701) #define MAX_SPEED (0.3*127) #define MAX_SPEED1 (0.25*127) #define PPR (4331/4) #define LEFT (1) #define RIGHT (0) #define STRAIGHT (2) #define FORWARD (1) #define BACKWARD (0) #define TOOLS (0) #define MID (1) #define RIGS (2) #define MID2 (3) #define RETURN (4) #define FAR (1) //States #define START 0 #define OILRIG1_POS 1 #define OILRIG2_POS 2 #define GOTO_TOOLS1 3 #define IDENTIFY_TOOLS 4 #define AQUIRE_TOOL1 5 #define AQUIRE_TOOL2 6 #define AQUIRE_TOOL3 7 #define NAVIGATE_WAVES_ROW1 8 #define NAVIGATE_WAVES_ROW2 9 #define NAVIGATE_WAVES_ROW3 10 #define NAVIGATE_TO_SQUARE_RIG 11 #define NAVIGATE_TO_TRIANGLE_RIG 12 #define NAVIGATE_TO_CIRCLE_RIG 13 #define RIG_ALIGN 14 #define INSERT_TOOL 15 #define END 16 #define GOTO_TOOLS2 17 //Servo Static Positions #define STORE_POSITION 0 #define OIL_RIG1 1 #define OIL_RIG2 2 #define OIL_RIG3 3 #define DRIVE_POSITION_NOTOOL 4 #define TOOL_1 5 #define TOOL_2 6 #define TOOL_3 7 #define DRIVE_POSITION_TOOL 8 #define ORIENT_TOOL 9 #define PU_TOOL_1 10 #define PU_TOOL_2 11 #define PU_TOOL_3 12 #define PU_TOOL_1_STAB 13 #define PU_TOOL_2_STAB 14 #define PU_TOOL_3_STAB 15 //Rig definitions #define SQUARE 1 #define TRIANGLE 2 #define CIRCLE 3 //Oil Rig distance thresholds #define OILRIG1_MAX 2200 #define OILRIG1_MIN 1000 #define OILRIG2_MAX 2200 #define OILRIG2_MIN 1000 #define OILRIG3_MAX 2200 #define OILRIG3_MIN 1000 //for servo normalization #define MIN_SERVO_PULSE 900 #define MAX_SERVO_PULSE 2100 #define SERVO_MAX_ANGLE 180 #define X_CENTER 80 #define Y_CENTER 60 DigitalOut myled1(LED1); DigitalOut myled2(LED2); DigitalOut myled3(LED3); DigitalOut myled4(LED4); InterruptIn startBtn(p7); void errFunction(void); bool cRc; Serial pc(USBTX,USBRX); //USB Comm Adafruit_PWMServoDriver pwm(p28,p27); //pwm(SDA,SCL) - Servo Control PWM DigitalOut ServoOutputDisable(p8); //Servo Control Output Enable/Disable extern Serial lrf; //Laser Range Finder lrf(p13,p14) //Hardware Initialization //Serial bt(p13,p14); HCSR04 rangeFinderLeft( PIN_TRIGGERL, PIN_ECHOL ); HCSR04 rangeFinderRight( PIN_TRIGGERR, PIN_ECHOR ); PID pid1(15.0,0.0,4.0,0.02); PololuQik2 motors(p9, p10, p8, p15, errFunction, cRc); QEI rightEncoder(p17,p18,NC,PPR,QEI::X4_ENCODING); QEI leftEncoder(p16,p15,NC,PPR,QEI::X4_ENCODING); Sharp IR(p20); //InterruptIn encoder(p29); /*************** local servo functions ****************/ void servoBegin(void); void initServoDriver(void); void setServoPulse(uint8_t n, int angle); void setServoPulse2(uint8_t n, float angle); //float precision void setServoPulseNo_delay(uint8_t n, int angle); void servoPosition(int set); int fire_checker(int rig); int button_start = 0; //Navigation Functions void wall_follow(int side, int direction, int section); void wall_follow2(int side, int direction, int section, float location, int rig); void leftTurn(void); void slightleft(void); void slightright(void); void rightTurn(void); void slightMove(int direction, float pulses); void to_tools_section1(float* location, float ¤t); void to_tools_section2(float* location, float ¤t); void from_tools_section(float* location, float ¤t); void mid_section(float* location, float ¤t, int* direction); void mid_section2(float* location, float ¤t, int* direction); void rig_section(float* location, float ¤t, int* direction, int rig); void tools_section_return(float* location, float ¤t); void mid_section_return(float* location, float ¤t, int* direction); void mid_section2_return(float* location, float ¤t, int* direction); void rig_section_return(float* location, float ¤t, int* direction); void overBump(int section); void alignWithWall(int section); void UntilWall(int dir); extern "C" void mbed_reset(); /************ Main Variables *************/ int state = START; int fire = 0; int tool_needed = 0; int shape_detected = 0; float range, range2, pid_return; /************ Variables for Servos *************/ int servoNum, servoAngle, outputDisabled, posNum, testVal; int currentPosition[7]; typedef struct { int arm_position_name; //for organization only (STORE, OILRIG1, OILRIG2...) int base_rotate; int base_arm; int big_arm; int claw_arm; int claw_rotate; int claw_open; } Coord; /******************** Static Arm Positions *********************/ Coord Arm_Table[] = { // POSITION ODER: // base_rotate, base_arm, int big_arm, int claw_arm, int claw_rotate, int claw_open //increase in number 5 rotates gripper {STORE_POSITION, 85, 10, 0, 165, 175, 0}, // storing position {OIL_RIG1, 160, 20, 60, 45, 175, 0}, // point laser at oilrig1 {OIL_RIG2, 163, 20, 60, 45, 175, 0}, // point laser at oilrig2 {OIL_RIG3, 130, 90, 90, 52, 175, 0}, // point laser at oilrig2 {DRIVE_POSITION_NOTOOL, 85, 10, 0, 165, 175, 0}, // Drive through course {TOOL_1, 96, 50, 80, 109, 90, 0}, // Look over first tool {TOOL_2, 79, 50, 80, 110, 90, 0}, // Look over second tool {TOOL_3, 59, 50, 80, 109, 90, 0}, // Look over third tool {DRIVE_POSITION_TOOL, 85, 10, 0, 165, 90, 105}, // Drive with tool loaded {ORIENT_TOOL, 135, 60, 75, 60, 90, 90}, // position tool to be inserted {PU_TOOL_1, 96, 46, 78, 102, 170, 0}, // STATIC Pickup tool POSITION {PU_TOOL_2, 74, 47, 80, 104, 170, 0}, // STATIC Pickup tool POSITION {PU_TOOL_3, 57, 44, 76, 102, 170, 0}, // STATIC Pickup tool POSITION {PU_TOOL_1_STAB, 98, 50, 90, 118, 90, 0}, // STAB TOOL 1 {PU_TOOL_2_STAB, 78, 50, 90, 108, 90, 0}, // STAB TOOL 2 {PU_TOOL_3_STAB, 53, 50, 90, 118, 90, 0}, // STAB TOOL 3 }; /* Variables for imageprocessing and distance */ int x_coord; int y_coord; int area; int shape; int shape_alignX_done = 0; int shape_alignY_done = 0; float deltaX = 0; /* Variables for distance sensor*/ int distLaser; int fire_detected = 0; int fire_not_detected = 0; void button_int(void) { if(!button_start) { button_start = 1; wait(1.0); } else { button_start = 0; mbed_reset(); } return; } int main() { /***************** INITIALIZATIONS *******************/ float location[3], current=4; int direction[3]; double distance; int pu, num, input; pc.baud(115200); /*while(1){ rangeFinderLeft.startMeas(); wait_ms(20); rangeFinderLeft.getMeas(range); rangeFinderRight.startMeas(); wait_ms(20); rangeFinderRight.getMeas(range2); pc.printf("left %f \t right %f\r\n", range, range2); }*/ //Laser Range Finder Initialization lrf_baudCalibration(); motors.begin(); startBtn.rise(&button_int); //Servo initialization initServoDriver(); servoBegin(); //initiates servos to start position //ServoOutputDisable = 0; /******************************** MAIN WHILE LOOP FOR COMPETITION *********************************/ while(1) { if(button_start == 1) { switch (state) { /************************************************** * STAGE 0 * * - START OF THE COMETITION * **************************************************/ case START : myled1 = 1; state = OILRIG1_POS; break; /************************************************** * STAGE 1 * * - DETERMINE OIL RIG ON FIRE * **************************************************/ case OILRIG1_POS: //aims arm at square oil rig /* servoPosition(OIL_RIG1); wait(3); //wait for servo to settle before laser distance fire = fire_checker(OIL_RIG1); //determines if oil rig is on fire */ fire=1; //determines what tool is needed if (fire == 1) { //pc.printf("FIRE FOUND!!!!!!!!\n\r"); tool_needed = SQUARE; state = GOTO_TOOLS1; } else { //pc.printf("XXXXXX FIRE NOT FOUND XXXXXX"); state = OILRIG2_POS; } break; case OILRIG2_POS: /* setServoPulse(2, Arm_Table[DRIVE_POSITION_NOTOOL].big_arm); setServoPulse(3, Arm_Table[DRIVE_POSITION_NOTOOL].claw_arm); setServoPulse(1, Arm_Table[DRIVE_POSITION_NOTOOL].base_arm); setServoPulse(0, Arm_Table[DRIVE_POSITION_NOTOOL].base_rotate); setServoPulse(4, Arm_Table[DRIVE_POSITION_NOTOOL].claw_rotate); setServoPulse(5, Arm_Table[DRIVE_POSITION_NOTOOL].claw_open); wait(3); //wait for servos to settle */ to_tools_section2(location, current); // moves to second rig wait(2); /* servoPosition(OIL_RIG2); //position arm to point at first oilrig wait(3); fire = fire_checker(OIL_RIG2); */ fire=1; if (fire == 1) { //pc.printf("FIRE FOUND!!!!!!!!"); tool_needed = TRIANGLE; state = GOTO_TOOLS2; } else { //pc.printf("XXXXXX FIRE NOT FOUND XXXXXX"); tool_needed = CIRCLE; state = GOTO_TOOLS2; } break; /************************************************** * STAGE 2 * * - TRAVEL TO TOOLS * **************************************************/ case GOTO_TOOLS1: /* setServoPulse(2, Arm_Table[DRIVE_POSITION_NOTOOL].big_arm); setServoPulse(3, Arm_Table[DRIVE_POSITION_NOTOOL].claw_arm); setServoPulse(1, Arm_Table[DRIVE_POSITION_NOTOOL].base_arm); setServoPulse(0, Arm_Table[DRIVE_POSITION_NOTOOL].base_rotate); setServoPulse(4, Arm_Table[DRIVE_POSITION_NOTOOL].claw_rotate); setServoPulse(5, Arm_Table[DRIVE_POSITION_NOTOOL].claw_open); wait(3); //wait for servos to settle */ to_tools_section1(location, current); wait(2); state = IDENTIFY_TOOLS; break; case GOTO_TOOLS2: /* setServoPulse(2, Arm_Table[DRIVE_POSITION_NOTOOL].big_arm); setServoPulse(3, Arm_Table[DRIVE_POSITION_NOTOOL].claw_arm); setServoPulse(1, Arm_Table[DRIVE_POSITION_NOTOOL].base_arm); setServoPulse(0, Arm_Table[DRIVE_POSITION_NOTOOL].base_rotate); setServoPulse(4, Arm_Table[DRIVE_POSITION_NOTOOL].claw_rotate); setServoPulse(5, Arm_Table[DRIVE_POSITION_NOTOOL].claw_open); wait(3); //wait for servos to settle */ slightMove(FORWARD,3100); current+=(abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2; wait(2); state = IDENTIFY_TOOLS; break; /************************************************** * STAGE 3 * * - Determine order of tools * - Aquire appropriate tool * **************************************************/ case IDENTIFY_TOOLS: state = NAVIGATE_WAVES_ROW1; break; wait(5); servoPosition(TOOL_2); //arm/camera looks over tool wait(5); //wait for servos to settle //shape_detected = shapeDetection(); //determines the shape //clearBounds(); //printImageToFile(BINARY); shape_alignX_done = 0; shape_alignY_done = 0; /* while( shape_alignY_done == 0) { wait(1); shape_detected = shapeDetection(); //pc.printf("Y - Adjust to center tool\n\r"); if(get_com_y() < 50) { wait(1); slightMove(FORWARD,25); current-=(abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2; } else if(get_com_y() > 70) { wait(1); slightMove(BACKWARD,25); current+=(abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2; } else { shape_alignY_done = 1; } }*/ for(int i = 0; i < 4; i++) { shape_detected = shapeDetection(); wait(2); if(get_com_x() > X_CENTER ) { deltaX = get_com_x()-X_CENTER; setServoPulse2(0,Arm_Table[TOOL_2].base_rotate += (deltaX/60.0) ); Arm_Table[PU_TOOL_2].base_rotate = Arm_Table[TOOL_2].base_rotate; } if(get_com_x() < X_CENTER) { deltaX = get_com_x()-X_CENTER; setServoPulse2(0,Arm_Table[TOOL_2].base_rotate += (deltaX/60.0) ); Arm_Table[PU_TOOL_2].base_rotate = Arm_Table[TOOL_2].base_rotate; } } /* while( shape_alignX_done == 0) { wait(1); shape_detected = shapeDetection(); pc.printf("X - Adjust to center tool\n\r"); if(get_com_x() > 95) { setServoPulse(0,Arm_Table[TOOL_2].base_rotate+=1); } else if(get_com_x() < 65) { setServoPulse(0,Arm_Table[TOOL_2].base_rotate-=1); } else { shape_alignX_done = 1; } }*/ //printImageToFile(BINARY); //either goes to aquire the tool or look at the next shape if(shape_detected == tool_needed) { state = AQUIRE_TOOL2; break; } else { slightMove(FORWARD,40); current+=(abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2; servoPosition(TOOL_1); wait(5); //wait for servos to settle shape_alignX_done = 0; shape_alignY_done = 0; /* while( shape_alignY_done == 0) { wait(1); shape_detected = shapeDetection(); pc.printf("Y - Adjust to center tool\n\r"); if(get_com_y() < 50) { wait(1); slightMove(FORWARD,25); current-=(abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2; } else if(get_com_y() > 70) { wait(1); slightMove(BACKWARD,25); current+=(abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2; } else { shape_alignY_done = 1; } }*/ for(int i = 0; i < 4; i++) { shape_detected = shapeDetection(); wait(2); if (get_com_x() > X_CENTER) { deltaX = get_com_x()-X_CENTER; setServoPulse2(0,Arm_Table[TOOL_1].base_rotate += (deltaX/60.0) ); Arm_Table[PU_TOOL_1].base_rotate = Arm_Table[TOOL_1].base_rotate; } if (get_com_x() < X_CENTER) { deltaX = get_com_x()-X_CENTER; setServoPulse2(0,Arm_Table[TOOL_1].base_rotate += (deltaX/60.0) ); Arm_Table[PU_TOOL_1].base_rotate = Arm_Table[TOOL_1].base_rotate; } } /* while( shape_alignX_done == 0) { wait(1); shape_detected = shapeDetection(); pc.printf("X - Adjust to center tool\n\r"); if(get_com_x() > 100) { setServoPulse(0,Arm_Table[TOOL_1].base_rotate+=1); } else if(get_com_x() < 60) { setServoPulse(0,Arm_Table[TOOL_1].base_rotate-=1); } else { shape_alignX_done = 1; } }*/ if (shape_detected == tool_needed) { state = AQUIRE_TOOL1; break; } else { servoPosition(TOOL_3); wait(3); //wait for servos to settle state = AQUIRE_TOOL3; } } break; case AQUIRE_TOOL1: servoPosition(PU_TOOL_1); setServoPulse(4, 175); wait(5); setServoPulse(0, Arm_Table[PU_TOOL_1].base_rotate ); wait(1); setServoPulse(1, Arm_Table[PU_TOOL_1].base_arm - 5); wait(1); setServoPulse(5, 105); wait(.5); setServoPulse(5, 00); setServoPulse(1, Arm_Table[PU_TOOL_1].base_arm - 6); wait(.5); setServoPulse(5, 105); wait(.5); setServoPulse(5, 00); setServoPulse(1, Arm_Table[PU_TOOL_1].base_arm - 10); wait(1); setServoPulse(5, 105); wait(1); setServoPulse(1, Arm_Table[PU_TOOL_1].base_arm); wait(2); setServoPulse(2, Arm_Table[DRIVE_POSITION_TOOL].big_arm); setServoPulse(3, Arm_Table[DRIVE_POSITION_TOOL].claw_arm); setServoPulse(1, Arm_Table[DRIVE_POSITION_TOOL].base_arm); setServoPulse(0, Arm_Table[DRIVE_POSITION_TOOL].base_rotate); setServoPulse(4, Arm_Table[DRIVE_POSITION_TOOL].claw_rotate); setServoPulse(5, Arm_Table[DRIVE_POSITION_TOOL].claw_open); state = NAVIGATE_WAVES_ROW1; break; case AQUIRE_TOOL2: servoPosition(PU_TOOL_2); setServoPulse(4, 175); wait(5); setServoPulse(0, Arm_Table[PU_TOOL_2].base_rotate ); wait(1); setServoPulse(1, Arm_Table[PU_TOOL_2].base_arm - 2); wait(1); setServoPulse(3, Arm_Table[PU_TOOL_2].claw_arm - 2); wait(1); setServoPulse(5, 105); wait(2); setServoPulse(5, 00); setServoPulse(1, Arm_Table[PU_TOOL_2].base_arm - 6); wait(2); setServoPulse(5, 105); wait(2); setServoPulse(5, 00); setServoPulse(1, Arm_Table[PU_TOOL_2].base_arm - 10); wait(2); setServoPulse(5, 105); wait(2); setServoPulse(1, Arm_Table[PU_TOOL_2].base_arm); wait(2); setServoPulse(2, Arm_Table[DRIVE_POSITION_TOOL].big_arm); setServoPulse(3, Arm_Table[DRIVE_POSITION_TOOL].claw_arm); setServoPulse(1, Arm_Table[DRIVE_POSITION_TOOL].base_arm); setServoPulse(0, Arm_Table[DRIVE_POSITION_TOOL].base_rotate); setServoPulse(4, Arm_Table[DRIVE_POSITION_TOOL].claw_rotate); setServoPulse(5, Arm_Table[DRIVE_POSITION_TOOL].claw_open); state = NAVIGATE_WAVES_ROW1; break; case AQUIRE_TOOL3: /* while( shape_alignY_done == 0) { wait(1); servoPosition(PU_TOOL_3); shape_detected = shapeDetection(); wait(2); pc.printf("Y - Adjust to center tool\n\r"); if(get_com_y() < 50) { wait(1); slightMove(FORWARD,25); current-=(abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2; } else if(get_com_y() > 70) { wait(1); slightMove(BACKWARD,25); current+=(abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2; } else { shape_alignY_done = 1; } } */ for(int i = 0; i < 6; i++) { shape_detected = shapeDetection(); wait(2); if (get_com_x() > X_CENTER) { deltaX = get_com_x()-X_CENTER; setServoPulse2(0,Arm_Table[PU_TOOL_3].base_rotate += (deltaX/60.0) ); } if (get_com_x() < X_CENTER) { deltaX = get_com_x()-X_CENTER; setServoPulse2(0,Arm_Table[PU_TOOL_3].base_rotate += (deltaX/60.0) ); } } setServoPulse(4, 175); wait(5); setServoPulse(0, Arm_Table[PU_TOOL_3].base_rotate ); wait(1); setServoPulse(1, Arm_Table[PU_TOOL_2].base_arm - 2); wait(1); setServoPulse(3, Arm_Table[PU_TOOL_2].claw_arm - 3); wait(1); setServoPulse(5, 105); wait(.5); setServoPulse(5, 00); setServoPulse(1, Arm_Table[PU_TOOL_3].base_arm - 6); wait(.5); setServoPulse(5, 105); wait(.5); setServoPulse(5, 00); setServoPulse(1, Arm_Table[PU_TOOL_3].base_arm - 10); wait(1); setServoPulse(5, 105); wait(1); setServoPulse(1, Arm_Table[PU_TOOL_3].base_arm); wait(2); setServoPulse(2, Arm_Table[DRIVE_POSITION_TOOL].big_arm); setServoPulse(3, Arm_Table[DRIVE_POSITION_TOOL].claw_arm); setServoPulse(1, Arm_Table[DRIVE_POSITION_TOOL].base_arm); setServoPulse(0, Arm_Table[DRIVE_POSITION_TOOL].base_rotate); setServoPulse(4, Arm_Table[DRIVE_POSITION_TOOL].claw_rotate); setServoPulse(5, Arm_Table[DRIVE_POSITION_TOOL].claw_open); state = NAVIGATE_WAVES_ROW1; break; /************************************************** * STAGE 4 * * - Navigate through the ocean * **************************************************/ case NAVIGATE_WAVES_ROW1: from_tools_section(location,current); mid_section(location, current, direction); state = NAVIGATE_WAVES_ROW2; break; case NAVIGATE_WAVES_ROW2: mid_section2(location, current, direction); state = NAVIGATE_WAVES_ROW3; break; case NAVIGATE_WAVES_ROW3: shape_detected=1; if(shape_detected == 1) { rig_section(location, current, direction, 1); while(1); state = NAVIGATE_TO_SQUARE_RIG; } else if(shape_detected == 2) { rig_section(location, current, direction, 2); while(1); state = NAVIGATE_TO_TRIANGLE_RIG; } else { rig_section(location, current, direction, 3); while(1); state = NAVIGATE_TO_CIRCLE_RIG; } break; /************************************************** * STAGE 5 * * - Travel to appropriate rig * **************************************************/ case NAVIGATE_TO_SQUARE_RIG: //NAVIGATION CODE HERE state = RIG_ALIGN; break; case NAVIGATE_TO_TRIANGLE_RIG: //NAVIGATION CODE HERE state = RIG_ALIGN; break; case NAVIGATE_TO_CIRCLE_RIG: //NAVIGATION CODE HERE state = RIG_ALIGN; break; /************************************************** * STAGE 6 * * - Align with appropriate rig * **************************************************/ case RIG_ALIGN: //*********************// //******* TODO ********// //*********************// // CODE TO ALIGN ROBOT WITH RIG // servoPosition(ORIENT_TOOL); wait(1); //wait for servos to settle state = INSERT_TOOL; break; /************************************************** * STAGE 7 * * - Insert Tool * - Extenguish fire * - win contest * **************************************************/ case INSERT_TOOL: //*********************// //******* TODO ********// //*********************// // CODE TO INSERT TOOL break; /************************************************** * STAGE 8 * * - END COMPETITION * **************************************************/ case END: servoPosition(STORE_POSITION); myled1 = 1; wait(.2); myled2 = 1; wait(.2); myled3 = 1; wait(.2); myled4 = 1; wait(.2); break; default: break; } } // End while loop } // End if for start button } // main loop /************ Servo Functions **************/ void setServoPulse(uint8_t n, int angle) { int pulse; pulse = MIN_SERVO_PULSE + (( angle * (MAX_SERVO_PULSE - MIN_SERVO_PULSE)) / SERVO_MAX_ANGLE); float pulselength = 20000; // 20,000 us per second int i = currentPosition[n]; //pc.printf("ServoNumber: %d Begining Pulse: %d\n\r",n,currentPosition[n]); int pulse2; if(currentPosition[n] < pulse) { for(i; i < pulse; i++) { pulse2 = 4094 * i / pulselength; pwm.setPWM(n, 0, pulse2); wait_ms(3); } } else if (currentPosition[n] > pulse) { for(i; i > pulse; i--) { pulse2 = 4094 * i / pulselength; pwm.setPWM(n, 0, pulse2); wait_ms(3); } } currentPosition[n] = i; //pc.printf("END: pulse: %d, angle: %d\n\r", i, angle); } void initServoDriver(void) { pwm.begin(); //pwm.setPWMFreq(100); //This dosen't work well because of uncertain clock speed. Use setPrescale(). pwm.setPrescale(140); //This value is decided for 20ms interval. pwm.setI2Cfreq(400000); //400kHz } void servoBegin(void) { //pc.printf("Setting Initial Servo Position\n\r"); setServoPulseNo_delay(3, Arm_Table[STORE_POSITION].claw_arm); setServoPulseNo_delay(2, Arm_Table[STORE_POSITION].big_arm); wait(2); setServoPulseNo_delay(1, Arm_Table[STORE_POSITION].base_arm); setServoPulseNo_delay(0, Arm_Table[STORE_POSITION].base_rotate); setServoPulseNo_delay(4, Arm_Table[STORE_POSITION].claw_rotate); setServoPulseNo_delay(5, Arm_Table[STORE_POSITION].claw_open); } void setServoPulseNo_delay(uint8_t n, int angle) { int pulse = MIN_SERVO_PULSE + (( angle * (MAX_SERVO_PULSE - MIN_SERVO_PULSE)) / SERVO_MAX_ANGLE); float pulselength = 20000; // 20,000 us per second currentPosition[n] = pulse; //pc.printf("ServoNumber: %d Pulsewidth: %d Angle: %d \n\r",n,pulse, angle); pulse = 4094 * pulse / pulselength; pwm.setPWM(n, 0, pulse); } void setServoPulse2(uint8_t n, float angle) { float pulse = MIN_SERVO_PULSE + (( angle * (MAX_SERVO_PULSE - MIN_SERVO_PULSE)) / SERVO_MAX_ANGLE); float pulselength = 20000; // 10,000 us per second pulse = 4094 * pulse / pulselength; pwm.setPWM(n, 0, pulse); } void servoPosition(int set) { //moves to current position setServoPulse(3, Arm_Table[set].claw_arm); setServoPulse(2, Arm_Table[set].big_arm); setServoPulse(1, Arm_Table[set].base_arm); setServoPulse(0, Arm_Table[set].base_rotate); setServoPulse(4, Arm_Table[set].claw_rotate); setServoPulse(5, Arm_Table[set].claw_open); } int fire_checker(int rig) { switch (rig) { case 1: for (int i = 0; i<10; i++) { distLaser = getDistance(); //pc.printf("L DISTANCE: %d \n\r", distLaser); if ((distLaser < OILRIG1_MAX) && (distLaser > OILRIG1_MIN)) { fire_detected++; } else { fire_not_detected++; } } break; case 2: for (int i = 0; i<10; i++) { distLaser = getDistance(); //pc.printf("L DISTANCE: %d \n\r", distLaser); if ((distLaser < OILRIG2_MAX) && (distLaser > OILRIG2_MIN)) { fire_detected++; } else { fire_not_detected++; } } break; } if (fire_detected > 0) { return 1; } else { return 0; } } void errFunction(void) { //Nothing } void wall_follow(int side, int direction, int section) { float location, set=4; int dir=1; pid1.reset(); if(direction == BACKWARD) dir=-1; if(section == TOOLS)set= 10; leftEncoder.reset(); rightEncoder.reset(); location=(abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2; while(location< 66.5) { location=(abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2; pid1.setInputLimits(0, set); pid1.setOutputLimits( -MAX_SPEED, MAX_SPEED); pid1.setSetPoint(set); if(side) { rangeFinderLeft.startMeas(); wait_ms(20); rangeFinderLeft.getMeas(range); } else { rangeFinderRight.startMeas(); wait_ms(20); rangeFinderRight.getMeas(range); //pc.printf("%d\r\n",range); } if(range > 15) { //pc.printf("wavegap %f\r\n",wavegap); // AT WAVE OPENING!!!! motors.setMotor1Speed(dir*0.25*127);//left motors.setMotor0Speed(dir*0.25*127);//right } else { pid1.setProcessValue(range); pid_return = pid1.compute(); if(pid_return > 0) { if(side) { motors.setMotor0Speed(dir*MAX_SPEED - dir*pid_return);//right motors.setMotor1Speed(dir*MAX_SPEED);//left } else { motors.setMotor1Speed(dir*MAX_SPEED - dir*pid_return);//left motors.setMotor0Speed(dir*MAX_SPEED);//right } } else if(pid_return < 0) { if(side) { motors.setMotor0Speed(dir*MAX_SPEED);//right motors.setMotor1Speed(dir*MAX_SPEED + dir*pid_return);//left } else { motors.setMotor1Speed(dir*MAX_SPEED);//left motors.setMotor0Speed(dir*MAX_SPEED + dir*pid_return);//right } } else { motors.setMotor0Speed(dir*MAX_SPEED);//right motors.setMotor1Speed(dir*MAX_SPEED);//left } } } //STOP motors.setMotor0Speed(dir*-0.3*127); //right motors.setMotor1Speed(dir*-0.3*127); //left wait_ms(10); motors.stopBothMotors(0); } /* MODIFIED WALL_FOLLOW FOR NAVIGATION */ void wall_follow2(int side, int direction, int section, float location, int rig) { int dir=1, limit=80, lowlim=4; float set=9, loc=0, Rigloc=0; bool SeeWaveGap = false; if(rig == 1) Rigloc= 16; else if(rig == 2) Rigloc= 45; else if(rig== 3) Rigloc = 70; pid1.reset(); if(direction == BACKWARD) { dir=-1; limit = 100; } else if(direction == FORWARD) lowlim=-20; if(section == TOOLS) { set= 9; limit = 86; } else if(section == RIGS) set = 9; else if(section == RETURN) lowlim=4; else if(section == MID2) limit =85; if(location <4) limit=80; leftEncoder.reset(); rightEncoder.reset(); pc.printf("before %f\r\n", location); //pc.printf("dir*loc+location %f\r\n",dir*loc + location ); //pc.printf("limit %d \r\n", limit); while((dir*loc + location <= limit) && (dir*loc + location >= lowlim)) { loc=(abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2; //pc.printf("loc %f \r\n", loc); pid1.setInputLimits(0.0, set); pid1.setOutputLimits( -MAX_SPEED1, MAX_SPEED1); pid1.setSetPoint(set); if(side) { rangeFinderLeft.startMeas(); wait_ms(20); rangeFinderLeft.getMeas(range); } else { rangeFinderRight.startMeas(); wait_ms(20); rangeFinderRight.getMeas(range); } if(section == RIGS) { rangeFinderLeft.startMeas(); wait_ms(20); rangeFinderLeft.getMeas(range2); if(range2< 15) { if( abs(dir*loc + location - Rigloc) < 10) { //STOP motors.stopBothMotors(127); break; } } } //pc.printf("wall follow 2 range %f\r\n",range); //pc.printf("loc+location = %f\r\n", loc+location); if(range > 15 ) { if(section == RIGS || section == RETURN) { motors.setMotor0Speed(dir*0.25*127); //right motors.setMotor1Speed(dir*0.25*127); //left } else { if(!SeeWaveGap) { wait_ms(40); SeeWaveGap=true; } else { //STOP motors.stopBothMotors(127); //pc.printf("wavegap\r\n"); // AT WAVE OPENING!!!! break; } } } else { SeeWaveGap = false; pid1.setProcessValue(range); pid_return = pid1.compute(); pc.printf("Range: %f\n PID: %f\r\n", range, pid_return); if(pid_return > 0) { if(side) { motors.setMotor0Speed(dir*MAX_SPEED - dir*pid_return);//right motors.setMotor1Speed(dir*MAX_SPEED);//left } else { motors.setMotor1Speed(dir*MAX_SPEED - dir*pid_return);//left motors.setMotor0Speed(dir*MAX_SPEED);//right } } else if(pid_return < 0) { if(side) { motors.setMotor0Speed(dir*MAX_SPEED);//right motors.setMotor1Speed(dir*MAX_SPEED + dir*pid_return);//left } else { motors.setMotor1Speed(dir*MAX_SPEED);//left motors.setMotor0Speed(dir*MAX_SPEED + dir*pid_return);//right } } else { motors.setMotor0Speed(dir*MAX_SPEED); motors.setMotor1Speed(dir*MAX_SPEED); } } } //STOP motors.stopBothMotors(127); } void alignWithWall(int section) { float usValue = 0; if(section == TOOLS) { //pc.printf("tools section align\r\n"); // turn at an angle leftEncoder.reset(); rightEncoder.reset(); motors.setMotor0Speed(-1.2*MAX_SPEED); //right motors.setMotor1Speed(0.4*MAX_SPEED); //left while(rightEncoder.getPulses()>-1000); motors.stopBothMotors(0); //go backwards toward wall leftEncoder.reset(); rightEncoder.reset(); motors.setMotor0Speed(-0.25*127); //right motors.setMotor1Speed(-0.25*127); //left while(abs(leftEncoder.getPulses()) < 300 || abs(rightEncoder.getPulses()) < 300); motors.stopBothMotors(0); // turn left towards wall leftEncoder.reset(); rightEncoder.reset(); motors.setMotor0Speed(MAX_SPEED); //right motors.setMotor1Speed(-MAX_SPEED); //left while(rightEncoder.getPulses() < 20 || abs(leftEncoder.getPulses()) < 20); motors.stopBothMotors(127); wait_ms(300); return; /* rangeFinderRight.startMeas(); wait_ms(20); rangeFinderRight.getMeas(range); if(range>15){ // turning left leftEncoder.reset(); rightEncoder.reset(); motors.setMotor0Speed(-MAX_SPEED); //right motors.setMotor1Speed(MAX_SPEED); //left while(abs(rightEncoder.getPulses()) < 50 || abs(leftEncoder.getPulses()) < 50); motors.stopBothMotors(127); return; } */ // turning left //motors.setMotor0Speed(0.9*MAX_SPEED); //right //motors.setMotor1Speed(-0.9*MAX_SPEED); //left } else if(section == RIGS) { // check distance to wall rangeFinderRight.startMeas(); wait_ms(20); rangeFinderRight.getMeas(range); if(range < 3) return; // turn at an angle leftEncoder.reset(); rightEncoder.reset(); motors.setMotor1Speed(-1.2*MAX_SPEED); //left motors.setMotor0Speed(0.4*MAX_SPEED); //right while(abs(leftEncoder.getPulses())<500); motors.stopBothMotors(0); wait(2); //go backwards toward wall leftEncoder.reset(); rightEncoder.reset(); motors.setMotor0Speed(-0.25*127); //right motors.setMotor1Speed(-0.25*127); //left while(abs(leftEncoder.getPulses()) < 200 || abs(rightEncoder.getPulses()) < 200); motors.stopBothMotors(0); wait(2); // turn right towards wall leftEncoder.reset(); rightEncoder.reset(); motors.setMotor0Speed(-MAX_SPEED); //right motors.setMotor1Speed(MAX_SPEED); //left while(abs(rightEncoder.getPulses()) < 50 || abs(leftEncoder.getPulses()) < 50); motors.stopBothMotors(127); /* wait(2); // turning left motors.setMotor0Speed(-0.9*MAX_SPEED); //right motors.setMotor1Speed(0.9*MAX_SPEED); //left */ }else if(section == MID2){ leftEncoder.reset(); rightEncoder.reset(); motors.setMotor0Speed(-1.2*MAX_SPEED); //right motors.setMotor1Speed(0.4*MAX_SPEED); //left while(rightEncoder.getPulses()>-1000); motors.stopBothMotors(0); //go backwards toward wall leftEncoder.reset(); rightEncoder.reset(); motors.setMotor0Speed(-0.25*127); //right motors.setMotor1Speed(-0.25*127); //left while(abs(leftEncoder.getPulses()) < 150 || abs(rightEncoder.getPulses()) < 150); // turn left towards wall leftEncoder.reset(); rightEncoder.reset(); motors.setMotor0Speed(0.4*127); //right motors.setMotor1Speed(-0.4*127); //left while(abs(rightEncoder.getPulses()) < 65 || abs(leftEncoder.getPulses()) < 65); motors.stopBothMotors(127); slightMove(FORWARD,100); return; } else {// MID //pc.printf("in mid section align\r\n"); // turn right towards wall rightTurn(); // turning left towards wall motors.setMotor0Speed(0.9*MAX_SPEED); //right motors.setMotor1Speed(-0.9*MAX_SPEED); //left } usValue = 0; /* while(1) { if(section == 10) { // CURENTLY NOT USED (WAS RIGS) rangeFinderRight.startMeas(); wait_ms(20); rangeFinderRight.getMeas(range); } else { rangeFinderLeft.startMeas(); wait_ms(20); rangeFinderLeft.getMeas(range); } //pc.printf("Range %f \t OldValue %f\n\r",range, usValue); if(range > usValue && usValue != 0 && range < 25) { break; } else { usValue = range; } } motors.stopBothMotors(0);*/ } void rightTurn(void) { motors.begin(); leftEncoder.reset(); rightEncoder.reset(); motors.setMotor0Speed(-0.5*127);//right motors.setMotor1Speed(0.5*127);//left while(abs(leftEncoder.getPulses())<850 || abs(rightEncoder.getPulses())<850); motors.stopBothMotors(127); } void leftTurn(void) { motors.begin(); leftEncoder.reset(); rightEncoder.reset(); motors.setMotor0Speed(0.5*127);// right motors.setMotor1Speed(-0.5*127);// left while(abs(leftEncoder.getPulses())<1075 || rightEncoder.getPulses()<1075); motors.stopBothMotors(127); } void slightleft(void) { leftEncoder.reset(); rightEncoder.reset(); motors.setMotor0Speed(0.5*127);// right motors.setMotor1Speed(-0.5*127);// left while(abs(leftEncoder.getPulses())<70 || rightEncoder.getPulses()<70); motors.stopBothMotors(127); } void slightright(void) { leftEncoder.reset(); rightEncoder.reset(); motors.setMotor0Speed(-0.4*127);// right motors.setMotor1Speed(0.4*127);// left while(abs(leftEncoder.getPulses())<200 || abs(rightEncoder.getPulses())<200); motors.stopBothMotors(127); } void slightMove(int direction, float pulses) { int dir=1; if(direction == BACKWARD) dir= -1; leftEncoder.reset(); rightEncoder.reset(); motors.setMotor0Speed(dir*0.25*127); //right motors.setMotor1Speed(dir*0.25*127); //left while(abs(leftEncoder.getPulses()) < pulses || abs(rightEncoder.getPulses()) < pulses); motors.stopBothMotors(127); } void UntilWall(int dir) { if(dir == BACKWARD) dir=-1; leftEncoder.reset(); rightEncoder.reset(); motors.setMotor0Speed(dir*0.2*127); //right motors.setMotor1Speed(dir*0.2*127); //left range = 30; while(range > 20) { rangeFinderRight.startMeas(); wait_ms(20); rangeFinderRight.getMeas(range); } motors.stopBothMotors(127); } void overBump(int section) { int preLeft=5000, preRight=5000, out=0; motors.begin(); // slight backwards leftEncoder.reset(); rightEncoder.reset(); motors.setMotor0Speed(-0.25*127); //right motors.setMotor1Speed(-0.25*127); //left while(abs(leftEncoder.getPulses()) < 50 || abs(rightEncoder.getPulses()) < 50); motors.stopBothMotors(127); //pc.printf("slight backwards\r\n"); wait_ms(200); // Over bump leftEncoder.reset(); rightEncoder.reset(); motors.setMotor0Speed(0.3*127); //right motors.setMotor1Speed(0.3*127); //left while((abs(leftEncoder.getPulses()) < 800 || abs(rightEncoder.getPulses()) < 800) /*&& preLeft!=0*/ && IR.getIRDistance() >15 ); //pc.printf("forward \r\n"); wait_ms(200); motors.stopBothMotors(0); motors.begin(); preLeft=preRight=5000 ; leftEncoder.reset(); rightEncoder.reset(); motors.setMotor0Speed(.25*127); //right motors.setMotor1Speed(.25*127); //left if(section == TOOLS) { while(IR.getIRDistance() > 10 && (abs(leftEncoder.getPulses()) < 200 || abs(rightEncoder.getPulses()) < 200) && (leftEncoder.getPulses() != preLeft || rightEncoder.getPulses() != preRight)) { if(IR.getIRDistance() > 38) break; preLeft=leftEncoder.getPulses(); preRight=rightEncoder.getPulses(); wait_ms(200); } } else if(section == MID || section == MID2) { if(section == MID2) while(IR.getIRDistance() > 15 && (abs(leftEncoder.getPulses()) < 100 || abs(rightEncoder.getPulses()) < 100)); while(IR.getIRDistance() > 15 && (abs(leftEncoder.getPulses()) < 100 || abs(rightEncoder.getPulses()) < 100) && (leftEncoder.getPulses() != preLeft || rightEncoder.getPulses() != preRight)) { if(IR.getIRDistance() > 38) break; preLeft=leftEncoder.getPulses(); preRight=rightEncoder.getPulses(); wait_ms(200); } } else {// RIGS while(abs(leftEncoder.getPulses()) < 220 || abs(rightEncoder.getPulses()) < 220); // go backwards to line up with bump leftEncoder.reset(); rightEncoder.reset(); motors.setMotor0Speed(-.15*127); //right motors.setMotor1Speed(-.15*127); //left while((abs(leftEncoder.getPulses()) < 100 || abs(rightEncoder.getPulses()) < 100) && preLeft!=0 ) { preLeft = leftEncoder.getPulses(); preRight = rightEncoder.getPulses(); wait_ms(200); if(leftEncoder.getPulses() == preLeft || rightEncoder.getPulses()== preRight) preLeft=preRight=0; } motors.stopBothMotors(127); motors.begin(); return; } motors.stopBothMotors(127); wait_ms(20); motors.begin(); } void to_tools_section1(float* location, float ¤t) { slightMove(FORWARD,6700); current+=(abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2; } void to_tools_section2(float* location, float ¤t) { slightMove(FORWARD,3200); current+=(abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2; } void from_tools_section(float* location, float ¤t) { //alignWithWall(TOOLS); //current-=4; //slightMove(FORWARD,150); //current+=1; //pc.printf("align\r\n"); //wait_ms(200); //wall_follow2(LEFT,FORWARD,MID, current); rangeFinderLeft.startMeas(); wait_ms(20); rangeFinderLeft.getMeas(range); if(range < 15) { wall_follow2(LEFT,BACKWARD,MID, current,0); //pc.printf("wall follow\r\n"); location[0]= current - ((abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2); current= location[0]; //pc.printf("current %f \r\n",current); // go backwards //slightMove(BACKWARD,200); wait_ms(100); leftTurn(); slightleft(); overBump(TOOLS); } else { //pc.printf("else greater than 20\r\n"); location[0]= current; leftTurn(); overBump(TOOLS); } //pc.printf("First Wavegap = %f\r\n",location[0]); } void tools_section(float* location, float ¤t) { wall_follow(LEFT,FORWARD, TOOLS); // current position in reference to the starting position current+=(abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2; //////////////////////////////// determine tool wait(2); /////////////////////////////////////////////////////////////////////////////////////// // Move Forward slightMove(FORWARD, 100); //////////////////////////////////////////Tool aquiring wait(2); //////////////////////////////////////////////////////////////////// After tool is aquired //alignWithWall(TOOLS); //pc.printf("align\r\n"); //wait_ms(100); //wall_follow2(LEFT,FORWARD,MID, current); //current+=((abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2); rangeFinderLeft.startMeas(); wait_ms(20); rangeFinderLeft.getMeas(range); if(range < 20) { wall_follow2(LEFT,BACKWARD,TOOLS, current,0); //pc.printf("wall follow\r\n"); location[0]= current - ((abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2); current= location[0]; //pc.printf("current %f \r\n",current); // go backwards leftEncoder.reset(); rightEncoder.reset(); motors.setMotor0Speed(-MAX_SPEED); //right motors.setMotor1Speed(-MAX_SPEED); //left while(abs(leftEncoder.getPulses()) < 120 || abs(rightEncoder.getPulses())< 120); // hard stop motors.stopBothMotors(127); wait_ms(100); leftTurn(); overBump(TOOLS); } else { //pc.printf("else greater than 20\r\n"); location[0]= current; leftTurn(); overBump(TOOLS); } //pc.printf("First Wavegap = %f\r\n",location[0]); } void mid_section(float* location, float ¤t, int* direction) { if(IR.getIRDistance() > 38) { direction[0]= STRAIGHT; overBump(MID); return; } //pc.printf("before align with wall \r\n"); //alignWithWall(MID); //current-=4; //wait_ms(200); //if(current > 20){ //alignWithWall(MID2); //current-=4; //} rightTurn(); //pc.printf("mid section current = %f\r\n",current); wall_follow2(LEFT,FORWARD,MID, current,0); current+=((abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2); //pc.printf("after wf2 current = %f\r\n",current); wait_ms(500); rangeFinderLeft.startMeas(); wait_ms(20); rangeFinderLeft.getMeas(range); if(range > 20 ) { direction[0]= RIGHT; location[1]= current; wait_ms(300); slightMove(FORWARD,100); //current+=((abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2); } else { direction[0]= LEFT; wall_follow2(LEFT,BACKWARD,MID,current,0); location[1]= current- ((abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2); current= location[1]; if(location[1] < 18) { slightMove(FORWARD, 75); } //slightMove(BACKWARD,100); } wait_ms(200); //pc.printf("wavegap2 = %f\r\n",location[1]); //left turn motors.begin(); leftEncoder.reset(); rightEncoder.reset(); motors.setMotor0Speed(0.5*127);// right motors.setMotor1Speed(-0.5*127);// left while(abs(leftEncoder.getPulses())<1045 || rightEncoder.getPulses()<1045); motors.stopBothMotors(127); wait_ms(100); overBump(MID); } void mid_section2(float* location, float ¤t, int* direction) { //pc.printf("mid section 2\r\n"); if(IR.getIRDistance() > 38) { direction[1]= STRAIGHT; overBump(RIGS); return; } //alignWithWall(MID); wait_ms(100); rightTurn(); slightright(); wait_ms(100); wall_follow2(LEFT,FORWARD,MID, current,0); current+=((abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2); wait_ms(500); //pc.printf("midseection 2 after wf2 %f",current); rangeFinderLeft.startMeas(); wait_ms(20); rangeFinderLeft.getMeas(range); if(range > 20 ) { direction[1]= RIGHT; location[2]= current; slightMove(FORWARD,50); current+=((abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2); } else { direction[1]= LEFT; wall_follow2(LEFT,BACKWARD,MID,current,0); location[2]= current- ((abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2); current=location[2]; //slightMove(BACKWARD,100); } //LEFT turn motors.begin(); leftEncoder.reset(); rightEncoder.reset(); motors.setMotor0Speed(0.5*127);// right motors.setMotor1Speed(-0.5*127);// left while(abs(leftEncoder.getPulses())<950 || rightEncoder.getPulses()<950); motors.stopBothMotors(127); overBump(RIGS); //pc.printf("overbump rigs\r\n"); } void rig_section(float* location, float ¤t, int* direction, int rig) { float loc; if(rig == 1) loc= 15; else if(rig == 2) loc= 45; else loc = 75; // Slight forward for turn slightMove(FORWARD,150); wait_ms(100); rightTurn(); //slightright(); if(current > loc) { //pc.printf("RIG section %f\r\n",current); wall_follow2(RIGHT, BACKWARD, RIGS, current, rig); current-=((abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2); } else { //pc.printf("RIG section %f\r\n",current); wall_follow2(RIGHT, FORWARD, RIGS, current, rig); current+=((abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2); } alignWithWall(MID2); current-=4; wall_follow2(RIGHT, FORWARD, RIGS, current, rig); current+=((abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2); slightMove(FORWARD, 75); } void tools_section_return(float* location, float ¤t) { if(location[0] > 16) { leftTurn(); wall_follow2(LEFT, BACKWARD, RETURN, location[0], 0); } motors.stopBothMotors(0); } void mid_section_return(float* location, float ¤t, int* direction) { if(direction[0] == RIGHT) { leftTurn(); alignWithWall(MID); wall_follow2(LEFT, BACKWARD, MID, current,0); current-=((abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2); rightTurn(); } else if(direction[0] == LEFT) { leftTurn(); wall_follow2(RIGHT, FORWARD, MID, current,0); current+=((abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2); rightTurn(); } //ELSE and GO FORWARD overBump(RIGS); } void mid_section2_return(float* location, float ¤t, int* direction) { if(direction[1] == RIGHT) { leftTurn(); wall_follow2(LEFT, BACKWARD, MID, current,0); current-=((abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2); rightTurn(); } else if(direction[1] == LEFT) { leftTurn(); wall_follow2(RIGHT, FORWARD, MID, current,0); current+=((abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2); rightTurn(); } //ELSE and GO FORWARD overBump(MID); } void rig_section_return(float* location, float ¤t, int* direction) { if(location[2] > current) { wall_follow2(RIGHT, FORWARD, MID, current,0); current+=((abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2); } else { wall_follow2(RIGHT, BACKWARD, MID, current,0); current-=((abs(leftEncoder.getPulses()*11.12/PPR) + abs(rightEncoder.getPulses()*11.12/PPR))/2); } rightTurn(); overBump(MID2); }