Emre Eken / Mbed OS MAX30001 SYS EvKit

MAX30001-MAX32630FTHR SYS EvKit

Dependencies:   USBDevice max32630fthr

Max30001 EVKIT Summary

The MAX30001 EVKIT SYS-MBED Evaluation System (EV System) is used to evaluates the MAX30001 sensor, which is an ECG (electrocardiogram), biopotential and bioimpedance analog front end solution for wearable applications. The full EV System consists of the MAX32630FTHR Development board (DEV board) and MAX30001 sensor board and the evaluation software. The EvKit features EKG, PACE, RtoR (R-peak timing), Bio-Z, and raw data logging.

The MAX30001 EVKIT SYS-MBED evaluation system is assembled, tested and contains the necessary circuitry and connections to evaluate the MAX30001 sensor.

When evaluated as an EV System, the MAX32630FTHR board provides the necessary logic rails, master clock, SPI, USB-to-Serial interfaces that are needed to evaluate the MAX30001 sensor board. MAX32630FTHR can be used as an independent development platform. Another wiki page for that platform is available here.

Communication with the DEV board is facilitated by Windows 7, Windows 8 and Windows 10 compatible software that provides a simple and intuitive graphical user interface (GUI).

HSP/LoggingService/Logging.h@0:8e4630a71eb1, 2018-04-05 (annotated)

Committer:
Emre.Eken@IST-LT-35101.maxim-ic.internal
Date:
Thu Apr 05 10:53:26 2018 +0300
Revision:
0:8e4630a71eb1
mbed os 5.8.1 compatible

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 1 #ifndef _LOGGING_H_
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 2 #define _LOGGING_H_
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 3
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 4 #include "mbed.h"
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 5
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 6 /**
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 7 * @brief This will read the mission location and if there is something valid,
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 8 * then run the Logging_ProcessMissionCmds()
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 9 * @param cmdBuffer buffer
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 10 */
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 11 uint32_t Logging_IsMissionDefined(uint8_t *cmdBuffer);
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 12
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 13 int8_t Logging_ReadMissionFromSDCard(uint8_t *buffer);
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 14
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 15 int8_t Logging_ReadMissionFromFlash(uint8_t *buffer);
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 16
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 17 // return the page where mission is defined, Mission specific
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 18 uint32_t Logging_GetMissionStartPage(void);
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 19
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 20 // return the page where the mission definition ends, Mission specific
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 21 uint32_t Logging_GetMissionEndPage(void);
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 22
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 23 // Returns the location where the Writing can start from, for data logging...
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 24 uint32_t Logging_GetLoggingStartPage(void);
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 25
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 26 // Returns the end location available where the Flash ends essentially.... for
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 27 // data logging.
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 28 uint32_t Logging_GetLoggingEndPage(void);
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 29
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 30 // returns one if the usb is connected, zero if not
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 31 uint32_t Usb_IsConnected(void);
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 32
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 33 void Logging_SetStart(bool state);
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 34
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 35 bool Logging_GetStart(void);
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 36
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 37 #endif /* _LOGGING_H_ */
Emre.Eken@IST-LT-35101.maxim-ic.internal 0:8e4630a71eb1 38