![](/media/cache/profiles/ibmfp2.jpg.50x50_q85.jpg)
Test an Adafruit single VL53L0X breakout board using the mbed LPC1768 and print distance measurement to PC
Dependencies: X_NUCLEO_53L0A1 mbed
Fork of HelloWorld_53L0A1 by
https://os.mbed.com/users/kbeck8/notebook/alternative-control-for-remote-control-vehicle/ has a more complex example using three LIDAR breakouts for gesture detection on the same I2C bus using the shutdown pin (solves the issue of them having the same I2C address). The driver has support for three, but an AND gate is required unless the driver is changed. DigitalOut pins turn shutdown on/off on each LIDAR.
Diff: main.cpp
- Revision:
- 10:891e10d3b4a6
- Parent:
- 9:9733cfdb0a18
- Child:
- 11:5186cc367be0
diff -r 9733cfdb0a18 -r 891e10d3b4a6 main.cpp --- a/main.cpp Mon Aug 07 14:54:55 2017 +0000 +++ b/main.cpp Tue Aug 22 14:42:10 2017 +0000 @@ -1,5 +1,5 @@ #include "mbed.h" -#include "x_nucleo_53l0a1.h" +#include "XNucleo53L0A1.h" #include <stdio.h> /* This VL53L0X Expansion board test application performs a range measurement in polling mode @@ -8,7 +8,7 @@ #define VL53L0_I2C_SDA D14 #define VL53L0_I2C_SCL D15 -static X_NUCLEO_53L0A1 *board=NULL; +static XNucleo53L0A1 *board=NULL; /*=================================== Main ================================== @@ -21,20 +21,19 @@ DevI2C *device_i2c = new DevI2C(VL53L0_I2C_SDA, VL53L0_I2C_SCL); /* creates the 53L0A1 expansion board singleton obj */ - board = X_NUCLEO_53L0A1::instance(device_i2c, A2, D8, D2); + board = XNucleo53L0A1::instance(device_i2c, A2, D8, D2); /* init the 53L0A1 expansion board with default values */ status = board->init_board(); if (status) { - printf("Failed to init board!\n\r"); + printf("Failed to init board!\r\n"); return 0; } while (1) { status = board->sensor_centre->get_distance(&distance); if (status == VL53L0X_ERROR_NONE) { - printf("Distance : %ld\n", distance); + printf("Distance : %ld\r\n", distance); } } } -