jim hamblen / Mbed 2 deprecated ESP8266-configuration-mbed-LPC1768

Setup and test the ESP8266 Wi Fi SOC from Sparkfun. Sets SSID and PASSWORD and prints status messages. For use on mbed LPC1768. Also reports IP and MAC address. See https://developer.mbed.org/users/4180_1/notebook/using-the-esp8266-with-the-mbed-lpc1768/

Dependencies:   mbed

Fork of ESP8266-configuaration-baudrate by Paul Staron

Diff: main.cpp

Revision:
2:c5515c7eba46
Parent:
1:4a9cc6d8c33d
Child:
3:14e33fec26c3
--- a/main.cpp	Tue Feb 10 16:35:26 2015 +0000
+++ b/main.cpp	Tue Feb 10 16:59:16 2015 +0000
@@ -9,16 +9,16 @@
 char buf[1024];
 char snd[255];
 
-char ssid[32] = "ssid";    // enter router ssid inside the quotes
-char pwd [32] = "password";    // enter router password inside the quotes
+char ssid[32] = "ssid";     // enter router ssid inside the quotes
+char pwd [32] = "password"; // enter router password inside the quotes
 
 void SendCMD(),getreply(),ESPconfig(),ESPsetbaudrate();
 
 
 int main() {
     
-    pc.baud(115200);    // set what you want here depending on your terminal program speed
-    esp.baud(115200);   // change this to the new ESP8266 baudrate if it is changed at any time.    
+    pc.baud(115200);  // set what you want here depending on your terminal program speed
+    esp.baud(9600);   // change this to the new ESP8266 baudrate if it is changed at any time.    
     
     //ESPsetbaudrate();   //******************  include this routine to set a different ESP8266 baudrate  ******************
 
@@ -46,18 +46,17 @@
     getreply();
     pc.printf(buf);
     
-    wait(1);
-   
+    wait(1);   
    
     pc.printf("\n---------- Get Version ----------\r\n");
     strcpy(snd,"AT+GMR\r\n");
     SendCMD();
     timeout=1;
     getreply();
-    pc.printf(buf);
+    pc.printf(buf);    
     
-    
-    wait(1);    
+    wait(1);
+        
     // set CWMODE to 1=Station,2=AP,3=BOTH, default mode 1 (Station)
     pc.printf("\n---------- Setting Mode ----------\r\n");
     strcpy(snd, "AT+CWMODE=1\r\n");
@@ -68,6 +67,16 @@
     
     wait(1);
     
+    // set CIPMUX to 0=Single,1=Multi 
+    pc.printf("\n---------- Setting Connection Mode ----------\r\n");
+    strcpy(snd, "AT+CIPMUX=1\r\n"); 
+    SendCMD();
+    timeout=1;
+    getreply();
+    pc.printf(buf);
+    
+    wait(1);
+    
     pc.printf("\n---------- Listing Acces Points ----------\r\n");
     strcpy(snd, "AT+CWLAP\r\n");
     SendCMD();